MODEL 23 PARTS CCESSORIES - Rail Development Group CatalogX3.pdf · 3 Switch Machine Covers 5 Lock,...

1

MODEL 23 PARTS & ACCESSORIES

Office 585.352.6868 Fax 585.352.2020 www.raildev.com

[email protected] Customer Service 877.734.7245

2

To Order Call: 1.877.734.7245

This Page Was Intentionally Left Blank

3

Switch Machine Covers 5 Lock, Point Detector and Throw Bar Parts and Accessories 9 Base Frame Bearings, Bushings 13 Gear Box Parts 15 Hand Throw Parts 19 Clutch Parts 21 Circuit Controller and Contact Parts 23 Motor Parts and Accessories 27 Condensation Heaters 31 Gaskets 33

Table of contents

To Order Call: 1.877.734.7245

Visa and MasterCard accepted

4


To Order Call: 1.877.734.7245

5

Gear Box Cover, Aluminum

120901-96

Cam Bolt for Controller Cover Four are required per cover

8060-306-01

To Order Call: 1.877.734.7245

Lock Rod Cover, Field Side

8060-116

Operating Bar Cover, Track Side

8060-117

6

To Order Call: 1.877.734.7245

Lock Rod Cover, Track Side

8060-118

8060-122

Beveled Washer For Lock Rod Cover, Two are required per machine

Plate for Point Detector Rod Cover Required for Field Side Cover

8060-120

Point Detector Rod Cover, Field Side

8060-121

7

To Order Call: 1.877.734.7245

Operating Bar Cover, Field Side

8060-125

8060-119

Point Detector Rod Cover, Field Side

Wire Entrance Coupling Assembly

8060-108

8


To Order Call: 1.877.734.7245

9

To Order Call: 1.877.734.7245

Point Detector Rod, Spade End

8060-191-01

Point Detector Rod, Threaded End

8060-245

Point Detector Lock Washer

8060-094

Point Detector Bushing Kit Two are required per machine

8060-246-01

10

To Order Call: 1.877.734.7245

Point Detector Bushing

8060-093

Point Detector Lock Nut

8060-095

Lock Rod Scraper Kit Includes mounting hardware, scrapper and housing

8060-335-02

8060-205

Nut, Lock Rod, Cupped

11

To Order Call: 1.877.734.7245

Throw Bar Coupling Only

120901-19

Operating Bar

120901-18

Throw Bar Coupling with Hardware Bolt, Lock Washer, Castle Nut, Cotter Pin

8060-206-01

Bolt, Throw Bar

8060-527-01

12


To Order Call: 1.877.734.7245

13

Operating Bar Wear Bracket

8060-100

To Order Call: 1.877.734.7245

Lock Rod Support Pins Two are required per machine

8060-143

8060-106

Guide Rollers Two are required per machine

Guide Rollers Two are required per machine

8060-107

14

To Order Call: 1.877.734.7245

Stud, for Guide Roller, Threaded Two are required per machine

8060-189

Stud, Guide Roller Two are required per machine

8060-192

15

To Order Call: 1.877.734.7245

Bevel Gear, “A “ Gear

120902-21

Bevel Gear, “B” Gear

120902-21B

8060-226

Bushing for Main Crank

Tube, Threaded, for Cut Out Switch

8060-181

16

To Order Call: 1.877.734.7245

Main Shaft, Crank

120902-23

Spacer Gear Box For 3/4” Shaft

8060-175

Spacer Gear Box For 5/8” Shaft

8060-176

Sealing Washer, M23 Gear Box Four are required per machine

8060-231

17

To Order Call: 1.877.734.7245

Bearing, Gear Box, Worm Shaft, Double Row

8060-227

Bearing, Gear Box

8060-228

18


To Order Call: 1.877.734.7245

19

To Order Call: 1.877.734.7245

Hand Throw Lever, Loop Design

120901-58

8060-215

Tag, Selector Lever “Motor”

8060-216

Tag, Selector Lever “Hand”

Ball, 3/4 inch, for Hand Throw

8060-337

20


To Order Call: 1.877.734.7245

21

To Order Call: 1.877.734.7245

Clutch Friction Discs Five are required per machine

8060-147

120902-7

Internal Tooth Friction Plate Two are required per machine

120902-8

External Tooth Friction Plate Two are required per machine

120902-6

End Plate, Friction Clutch One required per machine

22

To Order Call: 1.877.734.7245

120902-11

Clutch Nut Used on Both “A” and “B” Style Machines Fine Thread, Specify Coarse Thread if Required

23

To Order Call: 1.877.734.7245

Circuit Controller Assembly

120903-2XL Left Hand

120903-2XR Right Hand

Trunion, 3/4-10 M-23 Circuit Controller

8060-003-01

Trunion, 3/4-16 M-23 Circuit Controller

8060-004-01

Terminal Block, Controller Two are required per machine

120903-21

24

To Order Call: 1.877.734.7245

Motor Contact Upper Four are required per machine

Motor Contact Spring Two are required per machine

8060-153

8060-131

Motor Contact Lower Four are required per machine

8060-130

Eyebolt for Circuit Controller Two are required per machine

8060-127

25

To Order Call: 1.877.734.7245

Indication Contact Assembly Two are required per machine

8060-163-01

Screw for Operating Rod

8060-166

Locking Collars, for Motor Contact

120903-51A

Block for Latch Out

8060-156

26

To Order Call: 1.877.734.7245

Latch Out Assembly

8060-298-01

27

M23 Permanent Magnet Motor 8060-241-01 (20V) 8060-278-01 (110V)

Specifications

Operating Voltage: 20VDC or 110V Temperature Range - 40 C to +85 C

Description: RDG’s M23 Motor kit is constructed with a rugged permanent magnet design and meets all of the AREMA 12.2 recommended practices for switch machine motors. The motor features a current verses torque curve that meets or ex-ceeds OEM performance specifications. Included in this kit is everything needed to replace a US&S “Black Motor”.

Rugged Design

Replaces Existing US&S Black or Blue Motors

Installs Easily

3-Wire & 5-Wire Configuration

Includes : Motor

Mounting Bracket

Pinion Gear

Wiring Information

To Order Call: 1.877.734.7245

28

To Order Call: 1.877.734.7245

Strap for Terminal Board

8060-188

Terminal Board Board is one piece design and replaces 2 piece OEM board

8060-144

Terminal Board Kit Includes: Board, Studs, and Terminal markers.

120904-X20

Motor Brush, 20 V, Field Wound Motor (Black Motor) 8060-150

Motor Brush, 110V, Field Wound (Black Motor) 8060-151-01

Brush, M23 US&S Blue Motor, 20V (US&S Blue Motor) 8060-529

Brush, M23 US&S Blue Motor, 110V (US&S Blue Motor) 8060-530

Motor Brushes, 110V/24V RDG Blue Motor With 4 Brushes and Metal Brush Cover

8060-151

29

To Order Call: 1.877.734.7245

Bearing, Motor (Black Motor)

8060-274

30


To Order Call: 1.877.734.7245

31

To Order Call: 1.877.734.7245

Condensation Heaters

Specifications

Dimensions 1” x 3” Leads 24”, 300V, 22 AWG, Operating Voltage 10 V or 24V Construction Silicone Rubber Temp. Range 60F to +450F

Description

The solution to your condensation problem is no longer limited to where a traditional carbon heater resistor will fit. RDG Condensation Heaters can be used in a wide variety of applications where frost and condensation are a problem. They are a direct replacement for OEM heaters and heater as-semblies at a fraction of the cost. In addition, the flexible mounting and ease of installation allow the heaters to be applied in virtually any product.

Applications

Switch Machines ( Motor , Controller, Contact Compartments)

Gate Mechanisms

Control Panels

Switch Heaters

Snow Melting

Flexible Heater 110 volt, 15 watt 8050-620

Flexible Heater 110 volt, 30watt 8050-722




32


To Order Call: 1.877.734.7245

33

Gasket, Motor Cover

8060-043

Seal Kit

8060-145-01

To Order Call: 1.877.734.7245

8060-132

Seal, Packing for Clutch

8060-137

Seal, Motor/Wire Entrance

34

To Order Call: 1.877.734.7245

Seal, Cutout Switch

8060-138

Oil Seal, Worm Shaft

8060-204

Seal, Clutch

8060-139

35

Gasket, Worm Shaft

8060-178

Gasket, Hand throw

8060-177

To Order Call: 1.877.734.7245

36


To Order Call: 1.877.734.7245

37

www.raildev.com 877.734.7245

CONTACT INFORMATION:

Email: [email protected]

Phone: 585.352.6868

Toll Free 877.734.7245

Fax: 585.352.2020

Visa and MasterCard accepted

If you didn’t find the parts your looking for, please give us a call and a Customer Service Representative will assist you.

MODEL 23 PARTS CCESSORIES - Rail Development Group CatalogX3.pdf · 3 Switch Machine Covers 5 Lock,...

Documents

Transcript of MODEL 23 PARTS CCESSORIES - Rail Development Group CatalogX3.pdf · 3 Switch Machine Covers 5 Lock,...