mobile membrane microfiltration system - SUEZ - Water ... Aug-15 Water Technologies & Solutions fact...
Transcript of mobile membrane microfiltration system - SUEZ - Water ... Aug-15 Water Technologies & Solutions fact...
Find a contact near you by visiting www.suezwatertechnologies.com and clicking on “Contact Us.” *Trademark of SUEZ; may be registered in one or more countries. ©2017 SUEZ. All rights reserved. FS1682EN.docx Aug-15
Water Technologies & Solutions fact sheet
mobile membrane microfiltration system description and use The Mobile Membrane Microfiltration (MF) System provides quick and easy service to meet the needs of industrial water users, and is available for emergency, interval, or long-term requirements.
typical applications and benefits The Mobile MF System is ideal for the following applications:
• Excellent pre-treatment for ion exchange or reverse osmosis systems, producing water with very low turbidity (<0.1) and SDI (<1), improves flux rate, reduces cleaning, and extends DI resin and RO membrane life.
• Iron and Manganese removal from groundwater sources
• Removal of TSS and organics for reuse of process and waste waters.
• Color, odor, and taste removal for municipal and industrial processes
• Replacement of clarifiers with no sludge generation
key design features The Mobile MF is a trailer-enclosed system designed for quick deployment and configured to produce up to 800 gpm (180 m3/h) of water filtered from a variety of influent water sources. The system includes continuous monitoring instrumentation, including pressure, flow, temperature, and water quality, ensuring optimal operation. The Mobile MMF system also includes a chemical feed system for addition of coagulants and other pretreatment chemicals.
features • Up to 800 gpm (180 m3/hr) flow.
• Able to combine with other mobile products to enhance system capabilities
• Recovery rates of 90% to 97% or more
• Emergency, interval, and long-term service for micro-filtered water need
• Automated performance
• Smaller footprint
• Provides effluent turbidity of less than 0.05 NTU, and SDI less than 3
• Removes bacteria and particles larger than 3µm to non-detectable limits (>99.999%)
Page 2 FS1682EN.docx
general properties Trailer
Length: 48’-0” (14.6 meters)
Height: 13’-6” (4.1 meters)
Width: 8’-3” (2.5 meters)
Gross operating weight (approx.): 57,000 lbs. (25,9i00 kg)
Gross shipping weight (approx.): 30,700 lbs. (13,900 kg)
Connections
Connection Type: Victaulic/Flange
Inlet: 8 inches (200 mm)
Outlet (Filtrate): 8 inches (200 mm)
Backwash Waste: 8 inches (200 mm)
Misc. Waste: 3 inches (75 mm)
Electrical
Service: 480 VAC, 3 phases
Breaker size: 250 amps
Installed KVA: 148 KVA
Heating: Climate controlled via standard electric HVAC
PLC Instrumentation Parameter Inlet Outlet SUEZ Fanuc PLC
Flow X X Analog (4-20 mA) to customer tie-in and/or discrete tank level for automatic shut down and control
Pressure X X
Temperature X
Turbidity X X
System on Board
Membrane: PVDF Hollow Fiber Membrane
Air Compressor: Provides instrument air
Max. Water Temp.: 104ºF (40ºC)
Min. Water Temp.: 32ºF (0ºC)
Inlet Pressure: 30 psig (2 bar) to 45 psig (3 bar)
Min. Inlet Pressure: 5 psig (.3 bar)
Outlet Pressure: 30 psig (2 bar) to 90 psig (6.1 bar)
Max. Inlet Turbidity: 100 NTU/peak to 500 NTU
Maximum Inlet Water TSS:
300 mg/l
Influent Flow: Up to 1100 gpm (250 m3/hr)
Effluent Flow: Up to 800 gpm (181 m3/hr) continuous
Waste Flow: 5 gpm (1.1 m3/hr) max. intermittent
Effluent Turbidity: <0.05 NTU maximum, <0.2 NTU typical
SDI: <3 maximum, <2.5 typical