MOBILE CRANE! ANTIQUE CARS! BELL INDUSTRIES ...WELDING POSITIONERS RANSOME 6000 Lb...
Transcript of MOBILE CRANE! ANTIQUE CARS! BELL INDUSTRIES ...WELDING POSITIONERS RANSOME 6000 Lb...
BELL INDUSTRIESBELL INDUSTRIESFABRICATING & MACHINE SHOP EQUIPMENT
SALE SITE – 1835 GRIMMET DRIVE – SHREVEPORT, LOUISIANA 71101
ANTIQUE CARS!MOBILE CRANE!
TUESDAY, JUNE 21st @ 10:00 A.M. CDTInspection: MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT
28’VERTICAL2-5/8”
CAPACITY
<RANSOMEMODEL XHD TWIN
BERTSCH 10’ x 2-5/8” INITIAL PINCH BENDING ROLL
MODEL XHD TWIN BOOM-TYPEWELDINGMANIPULATOR
82”SWING
NEWELECTRICS
SWING
>BULLARD 74”
CUTMASTER VERTICAL BORING
MILL
Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
European HeadquartersUnit 7, Branxholme Industrial Estate, Bradford RoadBrighouse, West Yorkshire, HD6 4ES, England, UK
Tel 1484.401.906 Fax [email protected]
Asset Sales (Canada) Inc.4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z1L5Tel 902.852.5331 Fax 704.821.4325
Asset Sales, Inc.PANGBORN WHEELABRATOR VERTICAL PLATE BLAST
AUCTION SALE DATE & TIME – TUESDAY, JUNE 21st @ 10:00 A.M. CDT
2-5/8”CAPACITY
BERTSCH 10’ x 2-5/8” INITIAL PINCH BENDING ROLL REAR VIEW OF BERTSCH 10’ x 2-5/8” INITIAL PINCH BENDING ROLL
BENDING ROLLS10’ x 2-5/8” BERTSCH Model 30 Initial Pinch Bending Roll, Interchangeable Top Rolls, Roll Length 10’-½”, TopRoll Dia., 26”, Bottom Roll Dia., 28”, Hydraulic Drop End, P & H Joy Stick Controls, Motorized Adjustment, RollPosition Readouts, S/N M-10404, New 1978.32’ SOUTHWARK Pyramid Bending Rolls, Overall Length Of Rolls 32’, Bending Capacity 26’ X 3/8”, Top RollDia., 24”, Bottom Rolls Dia., 15”, Air Drop End, Trolley Controls, (2) Lower Center Support Rolls, S/N 32860.12’ x ¾” BERTSCH Pyramid Bending Rolls, Manual Drop End, Top Roll Dia., 15”, Bottom Rolls Dia., 12”, CenterSupport, S/N 6824.10’ x 3/8” WEBB Initial Pinch Bending Rolls, Model 6l, Roll Dia., 9”, 8-16 FPM, Air Drop End, S/N 56144.54” x 10 Ga. Pyramid Bending Roll, 6” Dia., Roll, Manual Operation.
FIT-UP ROLLS32’SOUTHWARK PYRAMID 32’ BENDING ROLLS
ANGLE ROLLSBUFFALO #2, 6” x 6” x ½” Vertical Angle Rolls, Manual Roll Adj., Roll Dia., 16”, Roll Face 7 ¼”.
HENDLEY & WHITMORE 2” x 2” x ¼” Vertical Angle Rolls, Manual Adjustment, Up To 2 ¾” Pipe Capacity, (6) Sets Of Rolls.
S
45’ RANSOME Fit-up Rolls Contained Within Steel Frame.
1 OF 4ROLLS
SHEARCINCINNATI 12’ x ½” Mechanical Shear, Series 4312, 36” Gap., Roller TransfersIn Bed, Treadle Operated, 6’ RH Squaring Arm, S/N 23086.
PRESS BRAKESTEELWELD 16’ x ¼” Cap., 10’ X ½” Cap., Approx., 300 Ton, K5-12 MechanicalPress Brake, Overall Length Of Bed And Ram 14’ With 26” Permanent L. H. HornOn Bed And Ram, Distance Between Housings 12’ 5 ½”, Throat 18”, Height OfThroat 26”, Die Holder, 4-way Die, Stroke 5”, 20 SPM
BERTSCH 12’ x ¾” PYRAMID BENDING ROLLS, , y , ,
LARGE ASSORTMENT OF PRESS BRAKE DIES
POWER APRON BRAKEDREIS & KRUMP 8’ x ¼”, Model 186 Power Apron Brake, S/N 56304.
TANK TURNING ROLLS200 Ton ARONSON Power Roll, Triple Rubber Tires, Variable Speed, 120 TonARONSON Power And Idler Set With Rubber Tires, Variable Speed, (2) 80 TonRANSOME Power Rolls Double Rubber Tires Variable Speed (2) 80 Ton
2
WEBB 10’ x 3/8” WEB INITIAL PINCH BENDING ROLL
RANSOME Power Rolls, Double Rubber Tires, Variable Speed, (2) 80 TonRANSOME Power And Idler Sets, Rubber Tires, Variable Speed, 40 TonRANSOME Power And Idler Set, Mounted On Steel Frame, Variable Speed,Rubber Tires, 40 Ton RANSOME Idler Rolls, Rubber Tires, 40 Ton ARONSONPower And Idler Set, Rubber Tires, Variable Speeds, (2) 40 Ton RANSOMEPower Rolls, Rubber Tires, Variable Speeds, 40 Ton RANSOME Idler Rolls,Rubber Tires, 1000 Lbs Capacity Shop Made Pipe Power And Idler Set, VariableSpeed, Rubber Tires.
MISCELLANEOUS TANK TURNINGROLLS
MACHINERY INSPECTION DATE & TIMES – MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT
BUFFALO #2 6” x 6” x ½” VERTICAL ANGLE ROLLS DRIES & KRUMP 8’ x ¼” POWER APRON BRAKEHENDLEY & WHITMORE 2” x 2” X ¼” VERTICALANGLE ROLLS
28’VERTICAL
CINCINNATI 12’ x ½” MECHANICAL SHEAR STEELWELD 16’ x ¼” CAPACITY 300 TON K5-12 MECHANICAL PRESS BRAKE
3>
<(2)
RANSOME MODEL 14 x 18
TRACK-TYPE BOOM
WELDING MANIPULATORS
AVAILABLE
MANIPULATORSRANSOME MODEL XHD TWIN BOOM-TYPE WELDING MANIPULATOR
WELDING MANIPULATORSRANSOME Model XHD Twin Boom Type Welding Manipulator, 28’ Vertical Travel,(1) Upper 30’L Boom With 24’ Travel, (1) Lower Boom With 102” Boom Travel,Stationary King Pin Base, Power Rotation, S/N 6314257.
(2) RANSOME Model 14 x 18 Track Type Boom Welding Manipulators With( ) yp g pTracks, 14’ Verticals, 18’ Horizontal Boom Travels, Na-5 Lincoln Welding Controls,1000 Amp Lincoln Power Sources, S/N 1235.
STEEL PLATE INVENTORY(9) PIECES of T-1 Steel Plate, Approximately 50,000 Lbs., 2” Thick, 43 ¼”W, 21’-24’ L.
WELDING POSITIONERSRANSOME 6000 Lb C it W ldi P iti V i bl S d R t ti 48”
RANSOME WELDING POSITIONER
3
RANSOME 6000 Lbs Capacity Welding Positioner, Variable Speed Rotation, 48”Square Table, S/N 5197
PANDJIRIS 3000 Lbs Cap., 30-6 Welding Positioner, Variable Speed Rotation,30” x 30” Table With 3-Jaw Gripper Chuck, S/N 800-5664-11.
P & H 2500 Lbs Cap., Welding Positioner, Variable Speed Rotation, 39” Dia Table.PANDJIRIS WELDING POSITIONER
(ABOVE) LARGE QUANTITY OF STEEL PLATE & MISCELLANEOUS CUT-OFF
<
PLATE BLASTPANGBORN #ES791c 70 Type CM Rotoblast VerticalPlate Blast, 4-wheel Design, Wheels Upgraded in 1976 to18 3 RGK S i dl D i Wh l (4) 30 HP 1800 RPM
AUCTION SALE DATE & TIME – TUESDAY, JUNE 21st @ 10:00 A.M. CDT
NEWELECTRICS
<PANGBORN WHEELABRATOR ROTOBLAST VERTICAL PLATE BLAST, 4-WHEELDESIGN
18-3 RGK Spindle Driven Wheels, (4) 30 HP, 1800 RPMMotors, Opening 48” X 120”H, Flush Floor Design, Equippedwith Dust Collection System, O.H. Trolley System With (2)Hoists, S/N ES791—591C70CM
SEAM WELDERSSHOP BUILT Horizontal Internal Seam Welder, HorizontalArm Travel 120”, Length Of Welding Boom 144”, 300 AmpPower Source And Lincoln Squirt Welder.
3 O’CLOCK Portable Seam Welder For Welding Tanks3 O CLOCK Portable Seam Welder For Welding Tanks.
Portable Double Seam Welder For Welding Tanks
WELDERS(6) 600 Amp LINCOLN Portable Gasoline Arc Welders, 600Amp LINCOLN R3S-600 Portable Mig Welder With WireFeed, (3) 600 Amp LINCOLN Idedarc DC-600 Arc Welders,(2) 600 Amp LINDE V1-600 Mig Welders With Wire Feeds,(5) 500 Amp LINCOLN R3R-500 Arc Welders, 400 AmpLINCOLN TM 400/400 Tig WelderLINCOLN TM-400/400 Tig Welder,400 Amp LINCOLN R3R Arc Welder, 400 Amp MILLERSRH-444 Arc Welder, S/N JA453109, (3) 300 Amp 5AE300LINCOLN Torpedo Welders, 300 Amp LINCOLN Tig300/300 Tig Welder, 300 Amp MILLER CP300 PortableWelder, (2) 300 Amp R3S300 LINCOLN Arc Welders, 250Amp AIRCO Portable Mig Welder, 250 Amp AIRCO ArcWelder, COBRAMETRIC Portable Mig Welder, (2)LINCOLN LN-7 Squirt Welders, NELSON Stud Welder
CIRCULATORY WELDING SHOP BUILT HORIZONTAL INTERNAL SEAM WELDER MISCELLANEOUS WELDERS
CIRCULATORY WELDING FIXTURE
WHIRLEY BIRD Circular Welding Fixture.
FLUX RECOVERY(2) INVINCIBLE Portable Flux Vacuums.
(2) BELT Flux Reclaiming Units For Sub Arc.
BURNING MACHINESBURNING MACHINES16’ X 75’ AIRCO Track Type Burning Machine, 16’W X 75’L Capacity, (4) Triple Torch Stations, Burning Table, Model 160 Exactograph.
10’ X 16’ CM 250 LINDE Track Type Burning Machine, Tracer Eye And Table, (6) Oxy Torches, (1) Plasma Torch, Burning Table.
GULLCO Track Burner With 120” Track, Burning Table.
(2) AIRCO Track Burners
MISCELLANEOUS WELDERS 200 TON HORIZONTAL HYDRAULIC WHEEL PRESS
(2) AIRCO Track Burners
JACKKNIFE Burning Machine With Table.
BANDSAWSJOHNSON 10” x18” Model J Horizontal Band Saw S/N H25609.
9” WELLS Horizontal Band Saw.
36” DO-ALL Vertical Band Saw, Welder/Grinder.^16’ x 75’ AIRCO
4
ABRASIVE SAW20” CONTINENTAL Chop Saw with Conveyor
WHEEL PRESS200 Ton Inclined Frame Hydraulic Horizontal Wheel Press,Swing Between Bars 48”, Work Length 110”
16 x 75 AIRCO TRACK TYPE BURNING MACHINE
Do-ALL 36” VERTICAL BANDSAW
<JOHNSON 10” x 18” MODEL J HORIZONTAL BANDSAW
WWW.ASSET-SALES.COM
VERTICAL BORING MILL74” BULLARD CutMaster, (2) Swivel Ram Heads, 74” T-slotted Table With Set Of(4) Faceplate Jaws, Max. Swing 82”, Max. Height Under Cross Rail 62”, Ram Travel30 ½” T bl S d T 60 RPM H d S i l 30 D C l t P 30 HP
MACHINERY INSPECTION DATE & TIMES – MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT
82”SWING
30 ½”, Table Speeds To 60 RPM, Heads Swivel 30 Degrees, Coolant Pan, 30 HPAC Drive, S/N 22735
HORIZONTAL BORING MILLS5” GIDDINGS & LEWIS Table Type Horizontal Boring Mill, #350-T, 5” Dia-spindle,Taper In Spindle No. 6 M.T., Table Working Surface 48” X 98”, Table Cross Travel84”, Distance – Spindle To End Support Bearing 146”, Aux-spindle Diameter 2 ½”,Main Spindle Speeds To 375 RPM, Aux-spindle Speeds To 1500 RPM, HeadstockVertical Travel 60”, Tail Stock, Double Outboard Saddle Supports, Newall C80 3-axisD.R.O., 26” Diameter G&L Facing Head With Ring Gear Drive, Pendant, S/N 5116.D.R.O., 26 Diameter G&L Facing Head With Ring Gear Drive, Pendant, S/N 5116.
2 ½” GIDDINGS & LEWIS Model 25 Table Type Horizontal Boring Mill, No. 4 MT,24” X 24” Built-in Rotary Table, Facing Head With Ring Gear Drive, Tail Stock, S/N606
LATHES36” x 132” CC SIDNEY H. D. Engine Lathe, Swing Over Bed 37 ½”, Spindle SpeedsTo 427 RPM, Swivel Compound, 4-Jaw Chuck, Taper Attachment, Thread Dial,Aloris Tool Post, Steady Rest, S/N 6410
74” BULLARD CUTMASTER VERTICAL BORING MILL26” x 72” CC LEBLOND REGAL Hollow Spindle Lathe, Swing Over Bed 27”, 5”Dia. Spindle Bore, Hardened Bed, Speeds 16-1200 RPM, Taper Attachment, (2)Steadies, 4-Jaw Chuck, S/N 6HS379.
22” x 96” CC MONARCH Lathe With Hi-Pressure Hydraulic Deep Hole DrillingAttachment, Swing 24 ½”, 5 Speeds To 400 Rpm, 4-Jaw Chuck, Hardened BedWays, Taper Attachment, Pan And Coolant, S/N 16487.
22” x 264” CC MONARCH Lathe, Model 22” CM, Swing Over Bed 24 ½”, Speeds 9To 400 Rpm, (2) Carriages With Swivel Compound And Taper Attachments, 4-JawChuck, Rapid Traverse, Pan And Coolant, (3) Steady Rests, S/N 11156.
19” x 78” CC LEBLOND REGAL Lathe, 3” Spindle Bore, Inch/Metric Threading,Pre-select Headstock, Hardened Bed, Speeds To 1600 Rpm, Taper Attachment, 3-Jaw Chuck, Steady Rest, S/N 12E-727.
5” GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING MILL
2 ½” GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING MILL
<36” x 132” CC 36 x 132 CC SIDNEY H.D. ENGINE LATHE
>22” x 264” CC MODEL 22 CM 264”MONARCH
LATHE264
CENTERS
526” x 72” CC LEBLOND REGAL LATHE19” x 78” CC LEBLOND REGAL HARDENED BED LATHE 22” x 96”CC MONARCH LATHE
DEEP HOLE DRILLING
ATTACHMENT
AUCTION SALE DATE & TIME – TUESDAY, JUNE 21st @ 10:00 A.M. CDT
76”CENTERS
TL-5A MORI-SEIKI CNC TURNING CENTER TL-TB MORI-SEIKI CNC TURNING CENTER SL3H MORI-SEIKI CNC TURNING CENTER
#81-A MARVEL TILT FRAME VERTICAL BANDSAW BARNES SLIDING HEAD DRILL
CNC TURNING CENTERSTL-5A MORI-SEIKI CNC Turning Center, Swing 25”, 76” CC, 8-StationTurret, 12” Dia 3-Jaw Power Chuck, Auto Chip Conveyor, Fanuc 6T, S/N 946.TL-TB MORI- SEIKI CNC Turning Center, Swing 25”, 76” CC, 8-StationTurret, 12” Dia., 3-Jaw Power Chuck, Auto Chip Conveyor, Fanuc 6T, S/N699
4’ x 11” CARLTON RADIAL DRILL RIDGID PORTABLE THREADER
699SL3H MORI-SEIKI CNC Turning Center, 2 ¾” Bore, Tail Stock, 10-StationTurret, 10” Dia., 3-Jaw Chuck, Fanuc 6T Control, S/N 3636.SL3H MORI-SEIKI CNC Turning Center, 2 ¾” Bore, Tail Stock, 10-StationTurret, 10” Dia., 3-Jaw Chuck, Fanuc 3T Control, S/N 3685.
VERTICAL BANDSAW#81-A MARVEL Tilt Frame Vertical Band Saw, Capacity 18” x 20”, 1 ¼”Blade, 10’ Auto Stock Feed Table With (2) Vises, Power Lift Roller, Model A-7-M5, S/N E-2180.
TOYOTA 11000 LB CAPACITY FORKLIFT
<FMC 45 TON
KOMATSU 6800 LB CAPACITY FORKLIFTCan’t Attend the Sale? Still
Want to Bid? Visit Our W b it t
MISCELLANEOUS MACHINERY & EQUIPMENTPortable Sand Blaster, Sheet Lifter, Portable Maintenance Platform, 48” X 110” Transfer Car With RubberTires, (4) 36” Electric Floor Fans, Steel Plate Inventory With Racks, (8) Steel Welding Stands, MILLER
7 M5, S/N E 2180.
ROTARY SURFACE GRINDER36” HANCHETT Model 36 Vertical Rotary Surface Grinder, 36” Dia. Table, Segmental Chuck, 50 HP, S/N 36182.
TAP DISINTEGRATORModel 300 ELECTRO-ARC Portable Tap Disintegrator, 10 Amp Capacity , S/N 52885
RADIAL DRILL
FMC 45 TON LINK-BELT HT-450 MOBILECRANE
Website at and Check Out Our
Upcoming Auction Calendar! You Can Also Sign Up to
Receive Email Notifications by Joining Our Mailing List!
Portable Auto-wire Feed, Welding Rod Oven, Portable Air Tugger, Fork Lift Boom Attachment, Crane HeldFork Lift Attachment, (2) Dry Rod Storage Cabinets, Rail And (2) Swivel Ram Heads From 120” CINCINNATIHypro Vertical Boring Mill, Motorized Pump, Stainless Steel Pipe With Racks, GRACO Portable Pump, (5) 50Ton DUFF-NORTON Jacks
FORKLIFTS & MOBILE CRANE45 Ton FMC Link-Belt HT-450 Mobile Crane, Diesel, 96’ Power Loom, 25’ Jib, Cab, S/N 29G-459B11,000 LB CAPACITY TOYOTA Forklift, Gasoline, Dual-Mast, Twin Rubber Front Tires, Soft Tires, Model3F050, S/N 3F660100376800 LB CAPACITY KOMATSU Forklift, Gasoline
4’ x 11” CARLTON Radial Drill, T-Slotted Base with Tilt Box Table, No. 4 M.T. Speeds to 1500 RPM, Manual Clamp, S/N 1A1368
DRILLS24” BARNES 2-Spindle Sliding Head Drill, No. 5 MT, Production Table, Power Feed, Model 262
20” CAMEL BACK Drill
17” DELTA Drill
GRINDERS
6
5000 LB CAPACITY TCM Gasoline Forklift, Soft Tires
TURRET LATHES(5) No.5 WARNER & SWASEY Ram-Type Turret Lathes
SHAPER36” GOULD & EBERHARDT Universal Shaper
GRINDERS3” SELLERS Drill Grinder
16” D.E. Pedestal Grinder
THREADER2” RIDGID Portable Threader
MACHINERY INSPECTION DATE & TIMES – MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT
ONLY4500MILES
ONLY
1961 ROLLS ROYCE SILVER CLOUD 2 1982 MASERATI QUATTRO PORTE SEDAN 1970 OLDSMOBILE NINETY EIGHT CONVERTIBLE
Can’t Attend the Sale? Still Want to Bid? Visit Our Website at www.asset-sales.comand Check Out Our Upcoming Auction Calendar! You Can Also Sign Up to Receive Email Notifications by Joining Our
Mailing List!
COMPLETELYREFURBISHED
ONLY1300MFG!
1951 PONTIAC SEDAN
EXCELLENT
TOOLING & MISCELLANEOUSHuge Amounts Of Tooling For #5 WARNER & SWAYSEY Ram Type Turret Lathes,Boring Mill Tooling, Boring Bars, M.T. Tooling, Tooling For Horizontal Boring Mills,Etc.
STEADY REST
1979 LINCOLN TOWNCAR
STEADY REST36” Diameter Capacity NOBLE & LUND 3 PT Steady Rest
TRUCKFORD Steel Flat-Bed Truck with BRADEN Power Winch, Jim Poles
AIR COMPRESSORS150 HP GARDNER DENVER Electra-Screw Rotary Screw Air Compressor,Enclosure And Skid Mount.30 HP INGERSOLL RAND Skid Mount Air Compressor.
ANTIQUE CARS1961 ROLLS ROYCE Silver Cloud 2, 4 Door Sedan, 8 Cylinder, Red Leather.1982 MASERATI Quattro Porte Sedan, Leather And Wood, (4500 Miles).1970 OLDSMOBILE Ninetyeight Convertible (Only 1300 Manufactured)1979 LINCOLN Towncar, Sedan, 50,000 Miles.1951 PONTIAC Sedan.
MISCELLANEOUS
7
MISCELLANEOUSIncluding: Steel Welding Tables, Back Vises, Fabricating Equipment, Burning AndWelding Supplies, Rubbing Rod, Welding Wire, Hand Tools, Power Tools, StorageCabinets, Plate Handling Equipment, Miscellaneous Material Handling, Hardware,Benches, Work Tables, Carts, Tank Turning Wheels And Frames, Shop Support,Etc.
Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll F ee 888 800 4442 Di ect 704 821 4315
Asset Sales, Inc.
Toll Free: 888.800.4442 Direct: 704.821.4315Fax: 704.821.4325 – www.asset‐sales.com
Asset Sales, Inc. – Louisiana License #1464
GREATCONDITION
FMC 45 TON LINK-BELT HT-450 MOBILE CRANE
UPCOMING AUCTIONS UPCOMING AUCTIONS June 2nd – Rymac IndustriesPlastic Injection Molding & Tool Room – High Point, North CarolinaJuly 12th – Brass & Bronze FoundryBrass & Bronze Foundry Equipment – Irwin, PennsylvaniaJuly 19th – Remarque ManufacturingComplete CNC & Manual Machine Shop – Hampton Virginia
“LYNYRD SKYNYRD”MILWAUKEE IRON STREET SURVIVORREAL ESTATE FOR SALE
TO BE AUCTIONED AT 12:00 NOONMilwaukee Iron, Inc.
110 Ramsey Place – Lynchburg, Virginia 24501
DIRECTIONS – Leave Shreveport Regional Airport (SHV) to I-220 East toward Monroe for 6.5miles, Exit right on 7A, US71 (Market Street) for 1.5 miles, then turn left on Hearne Avenue andfollow for one block, then take a left on Grimmett Drive. Follow about 1000 ft and 1835 is on theleft and parking is in the field on the right.
HOTELS
Want to join our mailing list? Want to be included in Email Blasts announcing future auctions? Want to update your address? Curious to
preview machines and tooling featured in an upcoming auction? Want to request a brochure? Or want to be removed from our mailing list?
J t it th i f th b k f thi b h d il f it
Visit our website at www.asset-sales.com to view all of our Upcoming Auctions, Download Complete Brochures, or to
Register to Bid Online.
HILTON SHREVEPORT BEST WESTERN CHATEAU SUITE HOTEL SAM’S TOWN
MILWAUKEE IRON Chopper “Nuthin Fancy”, Fabrication by Gary Woodford, 2004 S & S 124 Engine, 2005 Baker 6Speed with Chrome Finish, 38 Degree Rake, 2005 Paughco Springer Suspension, 21” Avon 120 Front Wheel, 18”Avon 120 Rear Wheel – mfg. 2006
MILWAUKEE IRON Southern Steel, Fabrication by Randy Simpson, 2004 S & S Super Stock Engine, 38 DegreeRake, 21” Avon 120 Front Wheel, 18”Avon 300 Rear Wheel – mfg. 2006
MILWAUKEE IRON Rigid Chopper “Karn Evil”, Fabrication by Randy Simpson and Gary Woodford, 2004 S & S/ 96Engine, 2004 Baker Drive Train 6 Speed, 36 Degree Rake, Paughco Springer Suspension, 21” x 3 Avon FrontWheel, 16” x 5 Avon Rear Wheel – mfg. 2005
Just write the info on the back cover of this brochure and email or fax it to us at:
[email protected] or (704) 821-4325
PUBLIC AUCTION
HILTON SHREVEPORT104 Market StreetShreveport, LA 71101(318) 698-0900
BEST WESTERN CHATEAU SUITE HOTEL201 Lake StreetShreveport, LA 71101(318) 222-7620
ABBREVIATED TERMS & CONDITIONS OF AUCTIONSubject to amendments and modifications announced by the auctioneer at the time of the auction, anyperson participating in the auction shall be bound by the following terms and conditions. The auctioneerdoes not warrant the accuracy, authenticity, description, weight, count or measure of any listingsspecified herein.All articles will be sold to the highest bidder conforming to the bid process in accordance to the
SAM S TOWN 315 Clyde Fant ParkwayShreveport, LA 71101(877) 429-0711
PUBLIC AUCTIONEverything Must Sell
BELL INDUSTRIESFABRICATING & MACHINE SHOP
EQUIPMENT
g g pAUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be removedin the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has totravel, may be removed until the close of the auction sale.All payments shall be by way of cash, certified check, wire transfer and/or a company checkaccompanied by a bank letter of guarantee payable to Asset Sales, Inc. All bidding and invoicing will bein US Dollars ($). All bidders are responsible for all applicable taxes.Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must be completed by theposted date. Rigging/Removal may not begin until payment has been made in full and the auction sale iscomplete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales,Inc as the insured
3
EQUIPMENT
SHREVEPORT, LOUISIANA 71101TUESDAY, JUNE 21st @ 10:00 A.M. CDT
Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS.A 13% Buyer’s Premium will apply to all onsite purchases and a 16% Buyer’s Premium for onlinepurchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process iseasy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms andConditions.
Anyone outside of the continental United States will be required to wire transfer a minimum deposit of $5000 to beapproved for all non-onsite bidding.