First informationandCall for papers

13th

Novi SadSerbia

International ScientificConference

September 28-29, 2018

Department ofProductionEngineering

University ofNovi Sad

Faculty ofTechnicalSciences

MATERIAL PROCESSING TECHNOLOGIESź Cutting Technology – improvement and application of existing

cutting processes; progressive, advanced, precision and environmentally friendly processes;

ź Fundamentals of cutting process – machinability, cutting characteristics, database of machining, intelligent machining processes;

ź Monitoring, modelling and optimization of machining processes – development of the procedures and their practical implementation;

ź Non-conventional and hybrid technologies – research and application in contemporary industry.

MACHINE TOOLS AND AUTOMATIC FLEXIBLE TECHNOLOGICAL SYSTEMS, CAx AND CIM PROCEDURES AND SYSTEMSź Development and prediction of trends in development of ma-

chine tools and complex manufacturing systems;ź New concepts of machine tools;ź Development of machine tool and manufacturing system

components; development of control, drive, measuring and manipulation systems;

ź Machine tool design; new methods in design and construction;ź Behavior testing of machine tools and components; modern

methods and results;ź Exploitation, modernization and maintenance of machine tools

as means to an increased productivity and cost efficiency, methods, procedures and solutions;

ź Automatic flexible technological structures; conceptual solutions, developed solutions, exploitation characteristics;

ź Procedures and systems for automated designing, construction and calculation - product design;

ź Procedures and systems for automated programming of NC machine tools, manipulation systems, measurement machines and complex technological systems;

ź Complex technological systems, Systems for computer integrated manufacturing; conceptual solutions, achievements in development;

ź Techno-economical aspects of practice ofCAD, CAM, CAQ, ..., CIM systems;

ź New approaches and methods in designing and production (systems of artificial intelligence, expert systems, mechatronics, concurrent engineering, reverse engineering, rapid prototyping, virtual prototype,…).

METROLOGY, ASSURANCE, CUTTING TOOLS, FIXTURES AND TRIBOLOGYź Legal metrology, standardization;ź Measurement and instrumentation, measurement methods,

measurement techniques;ź Precision engineering, calibration, CAQ/CAI;ź 3D-Digitization, reverse engineering, CAD Inspection;ź Quality tools, quality control;ź Total quality management, six sigma, manufacturing

management;ź Maintenance, maintenance systems, maintenance management;ź Technical diagnostics, diagnostics methods, diagnostics

techniques;ź Fixtures layout optimization, fixtures design, fixtures analysis;ź Flexible fixture systems, fixtures management;ź Cutting tool materials, cutting tool design;ź Modular tooling, cutting tool management;ź Surface topography, friction, wear, lubricants, coatings;ź Triboanalysis, tribomonitoring, tribometry, biotribology.

PROCESS PLANNING, OPTIMIZATION, LOGISTICS AND INTERNET TECHNOLOGIES IN PRODUCTION ENGINEERINGź Processes planning; Group technology; Integrated CAPP systemsź Technoeconomical optimization; Optimization methods;

Multi-criteria decision-making;ź Design for manufacturing and assembly-DfMA;

Product manufacturability; Production cost and timeź Production logistics; Production planning, scheduling and

control; Modeling, simulation and optimization ofmanufacturing and production processes;

ź Collaborative engineering; Cloud manufacturing; Smart manufacturing;

ź Manufacturing cyber physical systems; Internet of things in manufacturing.

MATERIALS, METAL FORMING, CASTING AND WELDING ź Materials in production engineering;ź Metal forming technologies;ź Casting technologies;ź Welding technologies;ź Heat treatment technologies, nanotechnologies and surface

engineering technologies;ź Plastics shaping technologies;

MECHANICAL ENGINEERING AND ENVIRONMENTAL PROTECTION ź Cleaner production;ź Recycling, zero waste technologies;ź Environmental management;ź Eco-design and Life Cycle Assessment (LCA) of products and

processes.

BIO-MEDICAL ENGINEERINGź Application of advanced engineering methods in development of

biomedical products (3D digitization, reverse engineering, rapid prototyping, virtual design...);

ź Application of advanced manufacturing technologies in produc-tion of biomedical products (CAD/CAM, 3D printing, rapid tooling...);

ź Modern approaches in quality control of biomedical products.

Miloš Knežev, secretaryFACULTY OF TECHNICAL SCIENCESDepartment of Production EngineeringTrg Dositeja Obradovica 6, 21000 Novi Sad, SerbiaTel.: (+381 21) 485 23 45; 485 23 31Fax: (+381 21) 454 495E-mail: mma2018@uns.ac.rswww.mma.ftn.uns.ac.rs

Review results information by September 5th, 2018.

Submission of application by May 30th, 2018.Notification of acceptance by June 15th, 2018.Submission of papers by August 20th, 2018.

Final programme by September 20th, 2018.

Paper application should contain: author(s) name(s), paper title, abstract in English (150 words) and mailing address.Abstracts and papers should be submitted to the site system

Conference fee is €100 for one paper and €50 for the participants without paper. Fee payment should be made until Sept. 15, 2018.Conference fee includes conference materials, participation in work and all other activities during the Conference.

for receiving papers: Registration and Paper submission

Information regarding accommodation shall be submitted in the next information.

Official language of the Conference is English.

The Conference will be held from September 28-29, 2018 atNovi Sad, Serbia.

MMAMMAMMA222000111888FLEXIBLEFLEXIBLEFLEXIBLETECHNOLOGIESTECHNOLOGIESTECHNOLOGIES

MATERIAL PROCESSING TECHNOLOGIESź Cutting Technology – improvement and application of existing

cutting processes; progressive, advanced, precision and environmentally friendly processes;

ź Fundamentals of cutting process – machinability, cutting characteristics, database of machining, intelligent machining processes;

ź Monitoring, modelling and optimization of machining processes – development of the procedures and their practical implementation;

ź Non-conventional and hybrid technologies – research and application in contemporary industry.

MACHINE TOOLS AND AUTOMATIC FLEXIBLE TECHNOLOGICAL SYSTEMS, CAx AND CIM PROCEDURES AND SYSTEMSź Development and prediction of trends in development of ma-

chine tools and complex manufacturing systems;ź New concepts of machine tools;ź Development of machine tool and manufacturing system

components; development of control, drive, measuring and manipulation systems;

ź Machine tool design; new methods in design and construction;ź Behavior testing of machine tools and components; modern

methods and results;ź Exploitation, modernization and maintenance of machine tools

as means to an increased productivity and cost efficiency, methods, procedures and solutions;

ź Automatic flexible technological structures; conceptual solutions, developed solutions, exploitation characteristics;

ź Procedures and systems for automated designing, construction and calculation - product design;

ź Procedures and systems for automated programming of NC machine tools, manipulation systems, measurement machines and complex technological systems;

ź Complex technological systems, Systems for computer integrated manufacturing; conceptual solutions, achievements in development;

ź Techno-economical aspects of practice ofCAD, CAM, CAQ, ..., CIM systems;

ź New approaches and methods in designing and production (systems of artificial intelligence, expert systems, mechatronics, concurrent engineering, reverse engineering, rapid prototyping, virtual prototype,…).

METROLOGY, ASSURANCE, CUTTING TOOLS, FIXTURES AND TRIBOLOGYź Legal metrology, standardization;ź Measurement and instrumentation, measurement methods,

measurement techniques;ź Precision engineering, calibration, CAQ/CAI;ź 3D-Digitization, reverse engineering, CAD Inspection;ź Quality tools, quality control;ź Total quality management, six sigma, manufacturing

management;ź Maintenance, maintenance systems, maintenance management;ź Technical diagnostics, diagnostics methods, diagnostics

techniques;ź Fixtures layout optimization, fixtures design, fixtures analysis;ź Flexible fixture systems, fixtures management;ź Cutting tool materials, cutting tool design;ź Modular tooling, cutting tool management;ź Surface topography, friction, wear, lubricants, coatings;ź Triboanalysis, tribomonitoring, tribometry, biotribology.

PROCESS PLANNING, OPTIMIZATION, LOGISTICS AND INTERNET TECHNOLOGIES IN PRODUCTION ENGINEERINGź Processes planning; Group technology; Integrated CAPP systemsź Technoeconomical optimization; Optimization methods;

Multi-criteria decision-making;ź Design for manufacturing and assembly-DfMA;

Product manufacturability; Production cost and timeź Production logistics; Production planning, scheduling and

control; Modeling, simulation and optimization ofmanufacturing and production processes;

ź Collaborative engineering; Cloud manufacturing; Smart manufacturing;

ź Manufacturing cyber physical systems; Internet of things in manufacturing.

MATERIALS, METAL FORMING, CASTING AND WELDING ź Materials in production engineering;ź Metal forming technologies;ź Casting technologies;ź Welding technologies;ź Heat treatment technologies, nanotechnologies and surface

engineering technologies;ź Plastics shaping technologies;

MECHANICAL ENGINEERING AND ENVIRONMENTAL PROTECTION ź Cleaner production;ź Recycling, zero waste technologies;ź Environmental management;ź Eco-design and Life Cycle Assessment (LCA) of products and

processes.

BIO-MEDICAL ENGINEERINGź Application of advanced engineering methods in development of

biomedical products (3D digitization, reverse engineering, rapid prototyping, virtual design...);

ź Application of advanced manufacturing technologies in produc-tion of biomedical products (CAD/CAM, 3D printing, rapid tooling...);

ź Modern approaches in quality control of biomedical products.

CONFERENCE TOPICS

INFORMATIONS

DEADLINES

PAPER APPLICATION and CONFERENCE FEES

ACCOMMODATION

DATES and VENUES

Mijodrag Milošević, chairman, FTN Novi Sad, SRBBojan Ačko, FS Maribor, SLOSergei Alexandrov, IPM Moskva, RUSAco Antić, FTN Novi Sad, SRBJan C. Aurich, TU Kaiserslautern, GERBojan Babić, MF Beograd, SRBSebastian Baloš, FTN Novi Sad, SRBKonstantinos-D. Bouzakis, AU Thessaloniki, GREErhan Budak, SU Istanbul, TURIgor Budak, FTN Novi Sad, SRBIlija Ćosić, FTN Novi Sad, SRBPredrag Ćosić, FSB Zagreb, CRORobert Čep, VŠB Ostrava, CZEFranc Čuš, FS Maribor, SLOLivia Dana Beju, LBU Sibiu, ROUGoran Devedžić, FIN Kragujevac, SRBLubomir Dimitrov, TU Sofia , BGRCristian Doicin, UP București, ROUDragan Domazet, UM Beograd, SRBRade Doroslovački, FTN Novi Sad, SRBNuman M. Durakbasa, TU Vienna, AUTKornel Ehmann, NU Illinois, USAValantina Gecevska, MF Skopje, MKDŠefket Goletić, MF Zenica, BIHDušan Golubović, MF Istočno Sarajevo, BIHMarin Gostimirović, FTN Novi Sad, SRBMiodrag Hadžistević, FTN Novi Sad, SRB František Holešovsky, UJEP Ústí, CZEJerzy Jędrzejewski, PW Wrocław, POLJanez Kopač, FS Ljubljana, SLOPavel Kovač, FTN Novi Sad, SRB Ivan Kuric, SF Žilina, SVKMikolaj Kuzinovski, MF Skopje, MKDGordana Lakić Globočki, MF Banja Luka, BIHDejan Lukić, FTN Novi Sad, SRBLjubomir Lukić, FMG Kraljevo, SRBOgnjan Lužanin, FTN Novi Sad, SRB Vidosav Majstorović, MF Beograd, SRB Miodrag Manić, MF Niš, SRB Ildikó Maňková, TU Košice, SVK Dorian Marjanović, FSB Zagreb, CROZoran Miljković, MF Beograd, SRB Radivoje Mitrović, MF Beograd, SRBSlobodan Mitrović, FIN Kragujevac, SRB Bogdan Nedić, FIN Kragujevac, SRBDuško Pavletić, TF Rijeka, CRODarko Petković, MF Zenica, BIHPetar B. Petrović, MF Beograd, SRB

Goran Putnik, University of Minho, PORRadovan Puzović, MF Beograd, SRBMiroslav Radovanović, MF Niš, SRB Milenko Sekulić, FTN Novi Sad, SRBTomislav Šarić, SF Slavonski Brod, CROMladen Šercer, FSB Zagreb, CROLeposava Šiđanin, FTN Novi Sad, SRBGoran Šimunović, SF Slavonski Brod, CROBranko Škorić, FTN Novi Sad, SRBĽubomír Šooš, STU Bratislava, SVK Dušan Šormaz, OH Athens, USATibor Szalay, BME Budapest, HUNSlobodan Tabaković, FTN Novi Sad, SRBBranko Tadić, FIN, Kragujevac, SRBLjubodrag Tanović, MF Beograd, SRBRadoslav Tomović, MF Podgorica, MNEMiroslav Trajanović, MF Niš, SRB Nicolae Ungureanu, FI Baia Mare, ROUDragiša Vilotić, FTN Novi Sad, SRBMircea Viorel Drăgoi, UT Brașov, ROUVojo Višekruna, MF Mostar, BIHĐorđe Vukelić, FTN Novi Sad, SRBLihui Wang, KTH Stockholm, SWEMilan Zeljković, FTN Novi Sad, SRB

Slavko Arsovski, FIN Kragujevac, SRBPavao Bojanić, MF Beograd, SRBMilenko Jovičić, MF Beograd, SRBVid Jovišević, MF Banja Luka, BIHMilisav Kalajdžić, MF Beograd, SRBMiodrag Lazić, FIN Kragujevac, SRBVučko Mečanin, MF Kraljevo, SRBVladimir Milačić, MF Beograd, SRBDragoje Milikić, FTN Novi Sad, SRBDragan Milutinović, MF Beograd, SRB Ratko Mitrović, MF Kragujevac, SRBSava Sekulić, FTN Novi Sad, SRBMirko Soković, FS Ljubljana, SLOBogdan Sovilj, FTN Novi Sad, SRBJelena Stankov, FTN Novi Sad, SRBVelimir Todić, FTN Novi Sad, SRBDragutin Zelenović, member of SASA, SRB

Dejan Lukić, chairmanAleksandar ŽivkovićBoris AgarskiBorislav SavkovićBranko ŠtrbacMario ŠokacŽeljko Santoši

Miloš Knežev, secretaryIvan MatinCvijetin MlađenovićMilana Ilić MićunovićDragan RodićNenad KulundžićZorana Lanc

Continuing a long tradition of more than 40 years, the Department of Production Engineering of the Faculty of Technical Sciences and its Chairs: Chair of machine tools, process planning, flexible manufacturing systems and design processes, Chair of metrology, quality, fixtures, tools and environmental-engineering aspects and Chair for material processing technologies organize an international scientific-expert conference, called:

13th International Scientific Conference

MMA 2018 - FLEXIBLE TECHNOLOGIES

The conference will cover current issues in the field of production engineering as well as multidisciplinary fields of mechanical engineering, information technologies, environmental engineering, biomedical engineering and other related engineering fields. The scientific-expert conference MMA, with its long tradition and regular organization since 1976, aims to gather and exchange experience of researchers and experts from faculties, institutes and industry, and thus wants to contribute to more intensive scientific and economic development.

With desire to improve scientific and expert meeting with joint efforts and results, we invite you to contribute to achieving these goals with your papers and your presence.

MMAMMAMMA 222000111888FLEXIBLEFLEXIBLEFLEXIBLE TECHNOLOGIESTECHNOLOGIESTECHNOLOGIES13 INTERNATIONAL SCIENTIFIC CONFERENCENOVI SAD, SERBIA, SEPTEMBER 28-29, 2018

TH

HONORARY COMMITTEE

ORGANIZING COMMITTEE

ABOUT THE CONFERENCE

INTERNATIONAL SCIENTIFIC COMMITTEE

MMA 2018FLEXIBLE TECHNOLOGIES