MLC CAD Systems Introducing… Presented by: John McCord How to customize.
-
Upload
stephany-kelly -
Category
Documents
-
view
216 -
download
0
Transcript of MLC CAD Systems Introducing… Presented by: John McCord How to customize.
MLC CAD Systems
Introducing…
Presented by:
John McCord
How to customizeHow to customize
MLC CAD Systems• Toolbars
• Adding/Removing toolbars• Creating custom toolbars• Saving Toolbar states• Applying toolbar states to Machine Definitions
• Keymapping• Using default keymappings• Creating new keymappings• Using shortcut keys in Mastercam
• System Configuration• Setting up Mastercam startup settings (Start/Exit)• Defining default Machines• Interface Default options
• Operation defaults• Operations Library vs Operation Defaults• Defining Defaults• Creating multiple Defaults• Creating Operation Library• Setting Control Definition default files
ToolbarsAdding
1. Settings > Toolbar States 2.Check the box to turn toolbar on
3. Drag new toolbar into place
ToolbarsRemoving
1. Click and Drag 2.Release in Graphics window
3. Click red X
ToolbarsSaving State
Settings > Toolbar States
Save!
Toolbars
1. Settings > Customize
2. Choose button and drag into screen
Create custom toolbar
Toolbars
3. Add additional buttons 4. Rename the toolbar
Create custom toolbar
5. Drag to desired location
Keyboard Shortcuts
1. Settings > Key Mapping
2. Choose command
Add
3. Apply Shortcut
System ConfigurationStart / Exit
Key Settings•Startup Product•Construction Plane•2D / 3D Mode•Editor
(recommended CIMCO)
System ConfigurationDefault Machines
Set Default machine to most commonly used machine definition.
The Default machine type will use this setting
System ConfigurationInterface Default Options
Backplot Defaults Verify Defaults
CAD Settings Chaining Defaults
System ConfigurationScreen
Key Settings•Graphics support•Middle Button Use•Levels dialog•Use ‘Free’ mode
System ConfigurationFile Import & Spin Control
Define default settings for opening file types
Change the spin increments
Operation DefaultsOperation Library vs Operation Defaults
• Library used for Import toolpaths
• Defaults determine initial toolpaths parameter settings
Operation DefaultsModifying Defaults
1. Load Machine Definition2. Select Files topic in Machine Group
3. Click the “!” for Operation Defaults
4. Choose the operation to edit and modify parameters
Operation DefaultsCreate New Defaults File
1. Load Machine Definition 2. Select files topics in Machine Group
3. Click the folder icon for Operation Defaults
Operation DefaultsCreate New Defaults File
4. Copy the Defaults and paste the file in the same window 5. Rename the new file
Operation DefaultsSet in Machine Definition
1. Load Machine Definition 2. Edit the Machine Definition
3. Open the Control Definition
4. Choose the files topic, then Default operation
5. Select the desired file