MK Series T-slot and C-slot dual cylinder sensors - ifm
2
Product Bulletin Two sensor elements integrated into a single connector reduces wiring Monitoring pneumatic cylinder position In pneumatic cylinder feedback applications, it is common practice to monitor the cylinder piston when it is extended or retracted. Typically this is achieved with a magnetic cylinder sensor that detects the internal ring magnet. ifm’s MK dual sensors reduce wiring When a large number of cylinder sensors are installed in close proximity, wiring can be a challenge. The ifm dual cylinder sensor provides two sensors integrated into a single 4-pin M8 connector or a 4-pin M12 connector. The dual sensor reduces wiring and lowers total install and material costs. AMR technology provides high performance ifm’s line of MK Series cylinder sensors incorporate AMR technology that provides enhanced performance and extreme durability in industrial automation applications. AMR has significant advantages over reed switch technology: small hysteresis for precise sensing, an unlimited number of cycles, high repeatability, fast response times, and extremely stable operating characteristics over a wide temperature range. AMR technology coupled with ifm’s mechanically robust housings result in a highly responsive and durable sensor. ifm’s cylinder sensor easily fits into slot style cylinders to provide low-profile mounting. Quick installation Compact sensors available with 4-pin M8 connector or a 4-pin M12 connector Reliable detection of pneumatic cylinder position in rugged industrial applications Unlimited number of cycles extends life in application Excellent repeatability and high switching frequency for fast-moving actuators Reduces wiring time, inventory and total cost of ownership MK Series T-slot and C-slot dual cylinder sensors One cylinder sensor per port increases wiring Two cylinder sensors per port allows more points and less wiring
Transcript of MK Series T-slot and C-slot dual cylinder sensors - ifm
Product Bulletin
Two sensor elements integrated into asingle connector reduces wiring
Monitoring pneumatic cylinder positionIn pneumatic cylinder feedback applications, it is commonpractice to monitor the cylinder piston when it is extended orretracted. Typically this is achieved with a magnetic cylindersensor that detects the internal ring magnet.
ifm’s MK dual sensors reduce wiringWhen a large number of cylinder sensors are installed in closeproximity, wiring can be a challenge. The ifm dual cylinder sensor provides two sensors integrated into a single 4-pin M8connector or a 4-pin M12 connector. The dual sensor reduceswiring and lowers total install and material costs.
AMR technology provides high performanceifm’s line of MK Series cylinder sensors incorporate AMR technology that provides enhanced performance and extremedurability in industrial automation applications. AMR has significant advantages over reed switch tech nology: small hysteresis for precise sensing, an unlimited number of cycles,high repeatability, fast response times, and extremely stableoperating characteristics over a wide temperature range.
AMR technology coupled with ifm’s mechanically robust housingsresult in a highly responsive and durable sensor. ifm’s cylinder sensoreasily fits into slot style cylinders to provide low-profile mounting.
Quickinstallation
Compact sensors available with 4-pin M8connector or a 4-pin M12 connector
Reliable detection of pneumatic cylinderposition in rugged industrial applications
Unlimited number of cycles extends life inapplication
Excellent repeatability and high switchingfrequency for fast-moving actuators
Reduces wiring time, inventory and totalcost of ownership
MK Series T-slot and C-slot dual cylinder sensors
One cylinder sensor per portincreases wiring
Two cylinder sensors per port allowsmore points and less wiring
MK Series T-slot and C-slot dual cylinder sensors
Lit. No.: U10116
ifm efector – close to you! ifm efector USA1100 Atwater DriveMalvern, PA 19355 800-441-8246www.ifm.com/us
ifm efector Canada2233 Argentia Road, Suite 104Mississauga, ON L5N 2X7855-436-2262www.ifm.com/ca
ifm efector MexicoAve. Arq. Pedro Ramírez Vázquez200-4, Planta Baja Col. Valle Oriente San Pedro Garza García, N.L. 66269 01-800-813-4363www.ifm.com/mx
Type
Cordsets
M8 Pico DC Part No.
(4-pin) 2 m, PUR EVC150
List Price(USD) M12 Micro DC Part
No.List Price(USD)
$15.00
(4-pin) 5 m, PUR EVC151 $18.00
(4-pin) 2 m, PUR EVC153 $15.00
(4-pin) 5 m, PUR EVC154 $18.00
(4-pin) 2 m, PUR EVC001 $9.95
(4-pin) 5 m, PUR EVC002 $13.50
(4-pin) 2 m, PUR EVC004 $9.95
(4-pin) 5 m, PUR EVC005 $13.50
PNP, N.O.
T-slot dual cylinder sensors
M8 10…30 VDC MK5208
Switching Frequency
6000 Hz
PNP, N.O. M12 10…30 VDC MK52096000 Hz
Output Connector OperatingVoltage
PartNo.
$101.00
$101.00
List Price(USD)
Technical dataCurrent consumption < 10 mAHysteresis < 1 mmShort-circuit protection yesReverse polarity / overload prot. yes / yesProtection IP 65, IP 67Power on time delay < 30 msAmbient temperature -13…185 °F / -25…85 °CMagnetic sensitivity 2 mTCurrent rating 100 mAMaterials housing: PA (polyamide);
fastening clamp: stainless steel
ifm magnetic cylinder sensors mount on smoothbody cylinders using a fixing strap and adapter.Measure the outside diameter of the cylinder.
Smooth body
Identify your cylinder type
Select youraccessory
T-slot accessories for mounting ifm cylinder sensors on any cylinder type
Product selector
11…19 mm E1197518…29 mm E1197628…39 mm E11977
38…49 mm E11978
48…59 mm E11979
58…69 mm E1198078…89 mm E11981
98…109 mm E11982
3…5 mm E11913
5…7 mm E11912
5…11 mm E11797
9…15 mm E11799
14…20 mm E11801
$9.00$9.00$10.00
$10.00
$10.00
$10.00$11.00
$11.00
$10.00
$10.00
$9.00
$10.00
$12.00
If the diametermeasurement is…
Order PartNumber
List Price
If the diametermeasurement is…
Order PartNumber
List Price
ifm magnetic cylinder sensors mount on a tie-rodand integrated profile cylinders using an adapter.Measure the diameter of the tie-rod.
Tie-rod and Integrated profile
PNP, N.O.
C-slot dual cylinder sensors
M8 10…30 VDC MK53505000 Hz
PNP, N.O. M12 10…30 VDC MK53515000 Hz
$101.00
$101.00
