Mk Conveyor Technology
-
Upload
ironalejan -
Category
Documents
-
view
216 -
download
0
Transcript of Mk Conveyor Technology
-
7/30/2019 Mk Conveyor Technology
1/308
mk Conveyor
Technology
-
7/30/2019 Mk Conveyor Technology
2/308
O ne construction k it
many options
Ba se Techno log y
P ro f ile Te ch no lo g y Co nve yo r Te ch no lo g y Fa ct o ry Eq uip me nt Lin ea r Mo t io n
Everything comes from one source: interchangeable modules and
compo nent s fo r profile, con veyan ce a nd linea r techno log y, as w ell
as factory equipment
Outsourcing of various project functions at a fixed price helps inte-
grators to minimize their project costs and risks
Coverage of all basic mechanical functions for modern factory auto-
mation
The w idest prof ile ran ge on t he ma rket reduces the need fo r speci-
al design and therefore provides a cost benefit due to standardiza-tion
High material quality, solid connecting technology and high-quality
accessories guarantee high loading capacity and long service life
The highest flexibility fo r system extensions or a lterat ion s due to
reusability of individual components and modules
The d egree o f a ssemb ly of o ur products ca n b e freely selected ,
guaranteeing optimum adaptation to existing utilization of resour-
ces at all times
The m od ula r con struction is subject to con stan t o ptimizat ion a nd
extension because mk itself uses it daily for the preparation ofcusto me r-specific so lutions
Advantages of the mk modular system
-
7/30/2019 Mk Conveyor Technology
3/308
Select ing the Co nveyo r System 4
Int ro ducing mk 6
Info rma t io n a bo ut Co nveyo r Techno lo g y 8
mk Belt Co nveyo rs 12
mk Mo dula r Belt Co nveyo rs 94
mk Incline Co nveyo rs 106
mk Timing Be lt Co nve yo r 138
mk Cha in Co nveyo rs 166
mk Fla t To p Cha in Co nveyo rs 206
mk Ro ller Co nveyo rs 224
mk Sta nds 246
mk Side Ra ils 262
mk Accesso ries 268
mk Accumula t io n a nd Sto ra g e 276
mk Lif t - a nd Tra nsfer St a t io ns 280
Custo mer Specif ic Applica t io n Exa mples 286
Our services 296
mk Conveyo r Techno logy 3
Table of contents
-
7/30/2019 Mk Conveyor Technology
4/308
Selecting the
Conveyor System
Belt Conveyors
GUF-P MINI
GUF-P 2000GUF-P 2041
GUF-P 2004
KGF-P 2040
DGF-P 2001
M od ular Belt Con veyors
MBF-P 2040.02
Incline ConveyorsKFG-P 2000
KFM-P 2040.86
KFS-P 2040.86
Timing Belt Conveyor
ZRF-P 2010
ZRF-P 2040.02
Chain Conveyors
KTF-P 2010
SRF-P 2010
SRF-P 2012
Flat Top Chain Conveyors
SBF-P 2254
Roller Conveyors
RBS-P 2065/ 2066RBS-P 2255
RBT-P 2255
RBM-P 2255
-
7/30/2019 Mk Conveyor Technology
5/308mk Conveyo r Techno logy 5*in 100 mm increments
75/100/150 410-5000 25 50 22/32
50-800 420-10000 75 80 10/12/19/52 200-1200 500-10000 150 60 22/85
200-2000 600-20000 200 60 105
300-600* 45-180 30 30 19
100-250 300-2000 15 30 25
210-1010 400-10000 150 30 110
300-700* 1000-4000 50 15 52
210-710 1000-10000 150 30 95
210-710 1000-10000 150 12 100
200-2000 500-6000 100 30 85
40/80/120/160 400-10000 200 30 100
200-2000 500-10000 200 30 90
200-2000 500-10000 200 30 90
200-2000 1000-10000 300 30 100
100/130 ind ivid ua lly 350 40 150
290-690* 500-5000 400 18 50 290-690* 500-5000 400 18 50
420-720* 600-10000 400 30 50
380-680* 500-5000 275 70 50
Conveyorwidthmm
Conveyorlengthmm
Totalloadmax.kg
Speedmax.m/min
Minimumpulley
diametermm
Reversible
Inclineavailable
Packagedfoodsuitability
Curve
Accumulation
Indexable
page 12
page 94
page 106
page 138
page 166
page 206
page 224
-
7/30/2019 Mk Conveyor Technology
6/308
We live our passion for technology
that shapes us for over 40 years
Introducing mk
Maschinenba u Kitz Gm bH, w as
founded in 1966 and is head-
q ua rtered in Troisdo rf, nea r
Bonn, operates internationa lly;
to ge th er w ith its subsidiaries
and sales parteners as the mk
Technolog y G roup . Ba cked b y
over 40 years of experience, mk
sells mecha nica l mo dules, compo -
nents for profile, conveyor and
-
7/30/2019 Mk Conveyor Technology
7/308mk Conveyo r Techno logy 7
linear technolog y, as w ell as fa c-
to ry equipmen t. These prod ucts
are based on more than 250
different aluminum profiles and
extensive stainless steel sheet
met al w ork. The mo dular con -
struction principle these products
offer ensure full compatibility
be tw een a ll prod ucts. The resul-
ting benefits include considerable
cost savings during installation
of the system, a s w ell as a high
degree of flexibility for future
extensions and re-configurations.
Our most important target mar-
kets include original machine
constructions, a s w ell as w ork in
the automotive, electrical, packa-
ging, pharmaceutical, and food
industries.
-
7/30/2019 Mk Conveyor Technology
8/308
Ad vant ages of m k Conveyor Technolog y
Optimum functionality of every system thanks
to the 20 different conveyor system s w hich canbe selected to suit the properties of the product
to be transported a s w ell as the environm ent in
w hich t he conveyo r is used
Simplified planning and design using standardized
modules
Maximum process reliability is assured by:
optimum functionality, mature technology,
high-quality materials and purchased parts,
fa st w orldw ide spare parts supply
Cost savings and short delivery times due tosta nda rd m od ular construction
High level of flexibility in systems manufacture
and mod ificat ion d ue to compa tibility w ith a ll
other mk profile technology, linear technology
and factory equipment systems
Competent design advice and support from
mks sales engineers
Customer-focused assistance, such as an online
CAD library
Information about
Conveyor Technology
-
7/30/2019 Mk Conveyor Technology
9/308mk Conveyo r Techno logy 9
Conveyor Technology selection criteria
Properties of the product to
be t ransported
Weight
Shape
Tem perat ure
Size
Sensitivity to shock
Dry vs. damp
Environment
Tem perat ure
Soiling, e.g. due to dust
Explosion protection
requirements
Clean room conditions
Foo d regulat ions
Chemical resistance
requirements
Transpor t path
Straight-line and curved
transport
Tran sport o n o ne level or on
different elevations
Acceptance and handover of the
product being transported
Defined acceptance and handover
Type of transport
Accumulat ed or g oo d traction
properties
Indexing
Defined orientation during
transport
Speed and cycle time
Degree of discharge
suited for your t ransporta tion
requirements please use the
list of criteria b elow . It is be st
to use our online tool at
w w w.mk-group.com.
By selecting the optimal system
for your conveyor requirements,
mk g uarantees m aximum process
saf et y. To select th e conveyo r best
-
7/30/2019 Mk Conveyor Technology
10/308mk Conveyo r Techno log y 10
Information about
Conveyor Technology
Drive locationWhen selecting a drive version, please note
th e ava ila ble drive locat ions (hea d/ta il, left /rig ht ,
below /ab ove).
hea d rig ht
left t a il
below a boveTra ve l
direction
M ot or or ien ta t ion The m ot or orienta tion can b e specified a s 0 , 90 ,
180 or 270 as show n. If no specific orienta tion is
requested, the drive location head, left , below
w ith m ot or orienta t ion 0 w ill be supplied a s a
s tandard .
Order considerat ions
The conveyo r type d esig na tion consists of the
selected Conveyor System, the Drive Version, the
Conveyor Length L and the Conveyor Width B.
The con figura tion of a specific conveyo r is influen-
ced by many factors. In order to ensure the correct
conveyor for your application, please include any
relevant informat ion relat ing to the prod uct and
the environm ent w here the con veyor w ill be used.
Not to be ignored are cleanroom or explosion-
proof requirements.
Conveyor Designation
GUF-P 2000 AC/.... / ...
Conveyor System
Drive Version
Conveyor Length L
Conveyor Width B
Besides the Conveyor Desig na tion w e also req uire
the follow ing informat ion:
Drive location, motor orientation
Speed (constant or variable)
If variable: Vmax
Trave l (Co nt inuo us or Accum ula ting )
Tail a t d ischarge (as app licab le)
Ta il a t pickup (as applicab le)
Be lt Typ e
Product (Weight and Dimensions)
Side Rails
Stands incl. altitude
Accessories
-
7/30/2019 Mk Conveyor Technology
11/308mk Conveyo r Techno logy 11
Conveyor lengths
The conveyo r leng th L is a n om inal size and is def ined a s the o uter distan ce of t he hea d pieces in the te nsion -
free state. The a ctua l conveyor leng th is generally larger a nd com es abo ut t aking the f ollow ing aspects intoaccount:
Rollers projecting b eyond the head pieces (bet w een 1 a nd 3.5 mm per side)
Minimum tension for the conveyor medium (for belts 0.3% of the length)
Compensation for the length tolerance of the conveyor medium (for belts up to 0.8%)
Thickness an d t hickness to leran ce of th e conveyor med ium (fo r belts betw een 1 and 5 mm per side)
If fixed lengths must be strictly adhered to on the customer side, it must be pointed out explicitly for inquiries and
orde rs. A fixed insta llat ion leng th ca n o nly be a ssured w ith drive version BC.
Motor selection
mk offers a number of different motors in its standard range of products. A tool is available on our homepage
at w w w .mk-group .com fo r selecting t he mo to r desig n fo r the current conveyo r systems GUF-P MINI, GUF-P 2000,
GUF-P 2041 and GUF-P 2004 for th e prod uction site in Germa ny. The ran ge of prod ucts varies ba sed o n t he
regulations an d req uirements ap plicable in t he count ry of o peration. AC Spiroplan g earbo x, AC w orm g earbo x
mo to rs an d in part, DC helical gea rbox mot ors from renow ned m an ufa cturers are preferred. With appropriate
stockkeeping , mk ma inta ins a sensible supply of spare parts. The end connection sizes of the mo to rs are ba sed
on DIN 42948.
Motor voltage
As a stand ard, m k provides moto rs wh ich comply w ith the norma l, expected electrical requirement s of the coun-
try w here they are ma nufa ctured. International mot ors are also availab le for conveyors design ed fo r export.
Motor pow er
Motors are sized to each individual conveyor style, size and performance requirements. A range of output of
0.054 kW to 0.75 kW (1/14 hp to 1/3 hp) is covered standard.
Speeds
The ma ximum conveyor speed d epends on t he mo tor, loa d o f t he belt , type of transport a nd length of the
conveyor selected . These figures refer to t he rated speeds. It should be no ted tha t th e mo to rs have a speed
to lerance of 10%. For AF drives, tha t ha s a direct impact o n t he conveyo r speed. For d rives w ith chain/to ot hed
belts, the to lerance te nds t o m ove into p ositive territo ry. The real speed can b e up t o 20% ab ove th e rated
speed.
Speed Control
For drives w ith AC mot ors and variab le speed, t his is adjusta ble based on the rat ed speed at 50 Hz in th e range
1: 7 (correspon ding 10 to 70 Hz). For DC mot ors, th e cont rol ran ge is 1: 6 (correspon ding to 0.25 to 1.5 A or 0.5
to 3.0 A).
Rating
All sta nda rd mo to rs are b uilt t o IP 54 (IP = Internat iona l Prot ection) stand ards, w hereby higher stand ards are
available on request.
Special featuresThe m ot ors are suita ble fo r cyclic ope ration o n reque st. At low er frequen cy ran g es, use of a uxiliary fa ns is requi-
red ba sed o n th e tem perat ure. The version w ith clutch/brake comb ination o r thermo stat ic sw itch is also po ssible
in t he rang e o f prod ucts. How ever, th is do es not apply to the CA drive version (w ith drum mo to r).
-
7/30/2019 Mk Conveyor Technology
12/308
mk Belt Conveyors
mk Conveyo r Techno log y 12
-
7/30/2019 Mk Conveyor Technology
13/308mk Conveyo r Techno logy 13
Con t ent s m k Belt Con veyors
GUF-P MINI 14
GUF-P 2000 26
GUF-P 2041 42
GUF-P 2004 54
KGF-P 2040 64
DGF-P 2001 70
Belt Co nveyo rs Belt Types 76
Belt Co nveyo rs Clea t Types 79
Belt Co nveyo rs Applica t io n Exa mples 84
-
7/30/2019 Mk Conveyor Technology
14/308
Belt Conveyors
GUF-P M INI
Conveyor frame
profiles
mk 2075
mk 2100
mk 2150
-
7/30/2019 Mk Conveyor Technology
15/308mk Conveyo r Techno logy 15
Due to its compact design, GUF-P
MINI conveyors are ideally suitedfor equipment applications such
as stamping machines, for exam-
ple, w here its small size a nd rig i-
dity a re an a sset . The a vailab le
T-slo ts (7 mm op ening) of Prof ile
mk 2075, mk 2100 or mk 2150
can be used to attach stands,
side rails or other components.
This sing le prof ile f ram e con -
struction ensures a rigid struc-
ture w ith g oo d load carrying
ca-pa city, w hereb y given valuesfor load, speed, etc. are directly
related and can vary as a result.
The drive rolls o f t he diffe rent
versions can be rubberized in
order to efficiently transfer all
available motor torque to the
belt. Crow ned drive and ta il
drums simplify belt tracking
and ensure proper alignment
of the belt a long the centerline
of the frame. The b elt t ravelson a stainless steel slider bed
w hich is fastened to the f rame
profile, thus providing low
friction and ensuring long belt
life. Finally, the underside of
the frame extends to not only
protect t he belt, yet allow s the
conveyor to be placed directly
onto an existing surface.
-
7/30/2019 Mk Conveyor Technology
16/308
Belt Conveyors
GUF-P M INI
Drive Version AA Drive Version AC
Drive Version AD Drive Version AG
Drive Version BA Drive Version BC
-
7/30/2019 Mk Conveyor Technology
17/308mk Conveyo r Techno logy 17
Cont ent s GUF-P M INI
GUF-P MINI AA Hea d Drive w itho ut Mo to r ex. fo r mult iple la nes 18
GUF-P MINI AC Hea d Drive Drive Ro ll 52 19
GUF-P MINI AD Hea d Drive Drive Ro ll 32 20
GUF-P MINI AG Hea d Drive Drive Ro ll 32 21
G UF-P MINI BA Ce nt e r Drive w it h o ut M o t o r, b id ire ct io n a l e x. fo r m ult ip le la n es 22
GUF-P MINI BC Center Drive, b id irect io na l Drive Ro ll 62 o 88 23
GUF-P MINI Ta ils 24
-
7/30/2019 Mk Conveyor Technology
18/308mk Conveyo r Techno log y 18
GUF-P M INI AA
Belt Conveyors w it h Head Drive, w it hou t M ot or
Features:
Drive Version AA is of te n used w here m ultiple la nes a re to be slave driven, either p a rallel or in-line,
w ith a sing le d rive mo to r. The com pa ct f rame is idea l fo r inte grat ing this con veyor into new or existing
eq uipmen t. Add itiona l feat ures include a 52 mm crow ned drive roll, separat e be lt tension roller, ea sy
belt tracking at ta il end, sealed ba ll bea ring s and a stainless steel slider bed fa stened to an aluminum
T-slot de sig ned fram e. Use o f clea te d b elts is no t p ossible w ith th is drive version . The 16 mm out put
shaft has a usable length of 19 mm and includes a 5 x 5 x 16 mm shaft key (DIN 6885).
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 365 - 5000 mm a ny increment possib le
Conveyor w idth B 75 mm, 100 mm and 150 mm
Belt Width B-15 mm see pa g e 76
Drive and Speed to 60 m/min (200 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 25 kg (55 Ibs) hig her on req uest
Ta ils
see page 24
Drive shaft on both sides also available.
Please specify th is w hen inq uiring .
B20.75.009
-
7/30/2019 Mk Conveyor Technology
19/308mk Conveyo r Techno logy 19
GUF-P M INI AC
Belt Con veyors w ith Head Drive
Features:
mk of fers a va riety of mo to r opt ion s for Drive Version AC, w hich a re sized an d selected fo r each a pplica-
tions ind ividua l speed a nd loa d req uirements. The comp act f rame is idea l fo r inte grat ing this con veyor
into new or existing eq uipmen t. Addition al fea tures include a 52 mm crow ned drive roll, separat e
belt t ension roller, ea sy belt t racking at ta il end, sealed b all bea ring s an d a stainless steel slider b ed
fa stened to an aluminum T-slot designed frame. Use o f clea ted belts is not po ssible w ith th is drive
version.
Dimensions Technical In fo rmat ion Notes
Conveyor length L b etw een 370 - 5000 mm a ny increment po ssib le
Conveyor w idth B 75 mm, 100 mm and 150 mm
Belt Width B-15 mm see pa g e 76
Drive Location hea d rig ht , hea d lef t hea d lef t show n
Drive and Speed t o 60 m/min (200 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 25 kg (55 Ib s) hig her o n req uest
Ta ils
see page 24
B20.75.001
-
7/30/2019 Mk Conveyor Technology
20/308mk Conveyo r Techno log y 20
GUF-P M INI AD
Belt Conveyors w ith Head Drive
Features:
mk off ers a variety o f m ot or o ptions fo r Drive Version AD, w hich a re sized an d selected fo r each ap plica-
tions ind ividua l speed a nd loa d req uirements. The comp act f rame is idea l fo r inte grat ing th is con veyor
into new or existing eq uipmen t. Addition al feat ures include a 32 mm crow ned drive roll, ea sy belt
tensioning and tracking at tail end, sealed ball bearings and a stainless steel slider bed fastened to an
aluminum T-slot de sig ned fram e. The 32 mm d rive roll a llow s for t he u se of clea te d b elts. Co mpa red
to Drive Version AC, this version is significantly more compact.
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 375 - 5000 mm a ny increment possib le
Conveyor w idth B 75 mm, 100 mm and 150 mm
Belt Width B-15 mm see pa g e 76
Drive Location hea d rig ht , hea d lef t hea d lef t show n
Drive and Speed to 15 m/min (50 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 15 kg (33 Ibs) hig her on req uest
Ta ils
see page 24
B20.75.033
-
7/30/2019 Mk Conveyor Technology
21/308mk Conveyo r Techno logy 21
GUF-P M INI AG
Belt Con veyors w ith Head Drive, sm all geared m ot or
Features:
The AG drive w ith sma ll g ea red mo to r has a slig ht ly mo dified structure comp ared to th e AD drive. The
com pa ct fram e is idea l fo r inte grat ing this conveyor into new or existing eq uipmen t. Add itiona l fea tu-
res include a 32 mm crow ned drive roll, ea sy belt t ension ing an d t racking at ta il end, sealed b all
bea ring s and a stainless steel slider b ed fa stened to an aluminum T-slot designed frame. The 32 mm
drive roll a llow s fo r th e use o f cleat ed belts. Comp ared to Drive Versio n AC, t his version is sig nifican tly
more compact.
Dimensions Technical In fo rmat ion Notes
Conveyor length L b etw een 375 - 5000 mm a ny increment po ssib le
Conveyor w idth B 75 mm, 100 mm and 150 mm
Belt Width B-15 mm see pa g e 76
Drive Location hea d rig ht , hea d lef t hea d lef t show n
Drive and Speed t o 15 m/min (50 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 15 kg (33 Ib s) hig her o n req uest
Ta ils
see page 24
B20.75.004
-
7/30/2019 Mk Conveyor Technology
22/308mk Conveyo r Techno log y 22
GUF-P M INI BA
Belt Con veyors w ith Cent er Drive w itho ut M ot or, bidirectional
Features:
Drive Version BA is used prima rily w hen driving multiple con veyors in pa rallel using on e d rive mo to r.
This conveyor is used as t he slave, or d riven, lane. The compa ct d esig n, a nd th e a bility to move the drive
location a nyw here along the conveyor frame, simplifies the integration o f t his conveyor into new or
existing eq uipmen t. Add itiona l feat ures include a 62 or 88 mm crow ned drive roll, separat e b elt
tensioning and tracking, sealed ball bearings and a stainless steel slider bed fastened to an aluminum
T-slot de sig ned fram e. Use o f clea te d b elts is not po ssible w ith th is drive version . The crow ned drive
roll fea tures a 20 mm ho llow shaft w ith a 6 mm keyw ay a ccording t o DIN 6885.
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 530 - 5000 mm a ny increment possib le
Conveyor w idth B 75 mm, 100 mm and 150 mm
Belt Width B-15 mm see pa g e 76
Drive and Speed to 60 m/min (200 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 25 kg (55 Ibs) hig her on req uest
Ta ils
see page 24
B20.75.030
-
7/30/2019 Mk Conveyor Technology
23/308mk Conveyo r Techno logy 23
GUF-P M INI BC
Belt Con veyors w ith Cent er Drive, bid irectional
Features:
mk off ers a variety o f m ot or o ptions fo r Drive Version BC, w hich a re sized an d selected fo r each ap pli-
cation s ind ividu al speed a nd lo ad requ iremen ts. When com bined w ith Drive Version BA, th is version
serves as the driving conveyor in pa rallel arran ge ment s. The comp act d esig n, a nd the ab ility t o move
the d rive locat ion an yw here along th e conveyor frame, simplifies the inte grat ion of this conveyor into
new or existing eq uipmen t. Add itiona l features include a 62 or 88 mm crow ned drive roll (dep en-
ding on the application), separate belt tensioning and tracking, sealed ball bearings and a stainless
steel slider b ed fa stened to an aluminum T-slot desig ned frame. Use o f cleat ed belts is not po ssible
w ith this drive version . The crow ned drive roll fea tures a 20 mm ho llow shaft w ith a 6 mm keyw ay
according to DIN 6885 and can be optionally located on the right or left.
Dimensions Technical In fo rmat ion Notes
Conveyor length L b etw een 530 - 5000 mm a ny increment po ssib le
Conveyor w idth B 75 mm, 100 mm and 150 mm
Belt Width B-15 mm see pa g e 76
Drive Location rig ht, left
Drive and Speed t o 60 m/min (200 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 25 kg (55 Ib s) hig her o n req uest
Ta ils
see page 24
B20.75.005
-
7/30/2019 Mk Conveyor Technology
24/308mk Conveyo r Techno log y 24
Tail 01
22
B
B+18
Ident-Nr. B80.01.002
22 mm crow ned roll
Sealed bearings
Belt tension and tracking
using alignment blocks
Minimum part size for
transfer 54 mm
Note mimimum pulley diameter
w hen selecting belt
GUF-P M INI
Tails
Tail 03
32
Ident-Nr. B80.01.001
32 mm crow ned roll
Sealed bearings
Belt tension and tracking
using alignment blocks
Minimum part size for
transfer 74 mm
Note mimimum pulley diameter
w hen selecting belt
Tail 19
32
B
Ident-Nr. B80.01.004
32 mm crow ned rollSealed bearings 10 mm x 15 mm long shaft ,3x3x12 mm shaft key (DIN 6885)Coupling of tw o lanes using onedrive (specify right, left or bothsides)Minimum part length fortransfer 74 mmNote mimimum pulley diameterw hen selecting belt
B+12
B+12
B+17
-
7/30/2019 Mk Conveyor Technology
25/308mk Conveyo r Techno logy 25
-
7/30/2019 Mk Conveyor Technology
26/308
Belt Conveyors
GUF-P 2000
Conveyor frame cross-sectionCon veyor fram e profiles
mk 2026Profile mk 2000
Angle B25
Profile mk 2000/2002
mk 2027
mk 2028
-
7/30/2019 Mk Conveyor Technology
27/308mk Conveyo r Techno logy 27
GUF-P 2000 conveyors are desi-
gned and manufactured usingour very rigid structural profile
system mk 2000, and assembled
using standard components.
Throug h this stan da rdiza tion w e
are able to offer an extremely
versat ile be lt con veyor w ith a
w ide variety o f d rive and ta il
options. A large selection of belt
types complement t he compa ct
frame height of 50 mm and the
52 mm drive roll, w hich is
available in either a steel or rub-berized version depending on
the application. All mk belt con-
veyor systems feat ure crow ned
rollers w hich sign ifica nt ly simpli-
fy belt tracking. Included system
T-slo ts (10 mm opening ) run th e
length of the conveyor frame
w hich can b e used fo r integ ra-
tion into existing equipment as
w ell as for mounting of sta n-
dard or customer-specfic stands,
side rails and other accessories.Additional quality details include
a stainless steel slider bed moun-
ted to the conveyor frame w hich
reduces wea r on the b elt, an d
sealed ball bearings for overall
conveyor life and performance.
In addition to the large selection
of side rails and stands, stops,
diverters, electrical brackets and
V-guided belts are also available.
-
7/30/2019 Mk Conveyor Technology
28/308
Belt Conveyors
GUF-P 2000
Drive Version AA Drive Version AC
Drive Version AF Drive Version AG
Drive Version AM Drive Version AS
Drive Version AU Drive Version BA
Drive Version BC
-
7/30/2019 Mk Conveyor Technology
29/308mk Conveyo r Techno logy 29
Contents GUF-P 2000
GUF-P 2000 AA Hea d Drive w itho ut Mo t o r ex. fo r mult iple la nes 30
GUF-P 2000 AC Hea d Drive 31
GUF-P 2000 AF Hea d Drive d irect 32
GUF-P 2000 AG Head Drive, sma ll g ea red mo to r 33
GUF-P 2000 AM Offset Hea d Drive 34
GUF-P 2000 AS Out sid e Hea d Drive 35
GUF-P 2000 AU Outside Hea d Drive 36
G UF-P 2000 B A Cen ter Drive w ithou t Motor, b id irect iona l ex. fo r mult ip le lanes 37
GUF-P 2000 BC Cent er Drive, b id irect io na l 38
GUF-P 2000 Ta ils 39
-
7/30/2019 Mk Conveyor Technology
30/308mk Conveyo r Techno log y 30
GUF-P 2000 AA
Belt Conveyors w it h Head Drive, w it hou t M ot or
Features:
Drive Version AA is of te n used w here m ultiple la nes a re to be slave driven, either p a rallel or in-line,
w ith a single drive mo to r. The series 50 frame is ide a l mo st ge nera l purpo se co nveying a pplication s.
Add itiona l featu res include a 52 mm crow ned drive roll, ea sy belt t racking at the ta il end , sealed ba ll
bea ring s and a sta inless steel slider b ed fa stened to an aluminum T-slot desig ned frame. Cleat ed belts
ma y be used w ith this drive version . The 16 mm ou tput shaft ha s a usable leng th of 20 mm f or
chain drive or 29 mm for timing belt drive. Both include a 5 x 5 x 16 mm shaft key (DIN 6885).
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 410 10000 mm a ny increment possib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers on req uest
Belt Width B-10 mm see pa g e 76
Drive and Speed to 80 m/min (260 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 75 kg (165 Ibs) hig her on req uest
Ta ils
see page 39
B20.00.009
20
/29
19
-
7/30/2019 Mk Conveyor Technology
31/308mk Conveyo r Techno logy 31
GUF-P 2000 AC
Belt Con veyors w ith Head Drive
Features:
mk off ers a variety o f m ot or o ptions fo r Drive Version AC, w hich a re sized an d selected fo r each ap pli-
cation s specific speed an d loa d req uireme nt s. The series 50 fram e is ide al mo st g ene ral purpo se con -
veying app lications. Add itiona l feat ures include a 52 mm crow ned drive roll, ea sy belt tracking at th e
ta il end, sea led ba ll bearing s and a stainless steel slider b ed fa stened to an aluminum T-slot desig ned
frame. Cleat ed b elts ma y be used w ith th is drive version .
Dimensions Technical In fo rmat ion Notes
Conveyor length L b etw een 410 10000 mm a ny increment po ssib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers o n req uest
Belt Width B-10 mm see pa g e 76
Drive Location hea d rig ht b elow , hea d lef t b elow , hea d lef t show n
head right above, head lef t above
Drive and Speed t o 80 m/min (260 f t/min) see pa g e 11Stands and Side Rails see page 246
Load Capacity max. 75 kg (165 Ibs) hig her o n req uest
Ta ils
see page 39
B20.00.002
19
-
7/30/2019 Mk Conveyor Technology
32/308mk Conveyo r Techno log y 32
GUF-P 2000 AF
Belt Conveyors w ith Head Drive direct
Features:
By placing the motor directly onto the drive shaft, this drive version minimizes not only the space
required at the d rive yet also t he numb er of moving parts and maintenance requirements.
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 410 - 10000 mm a ny increment possib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers on req uest
Belt Width B-10 mm see pa g e 76
Drive Location head right , head lef t head lef t show n
Drive and Speed 2.8; 3.6; 4.4; 5.4; 6.5; 7.7; 8.7;
10.9; 12.9 a nd 14.9 m/min see pa g e 11Stands and Side Rails see page 246
Load Capacity max. 30 kg (65 Ibs) hig her on req uest
Ta ils
see page 39
B20.00.011
19
-
7/30/2019 Mk Conveyor Technology
33/308mk Conveyo r Techno logy 33
GUF-P 2000 AG
Belt Con veyors w ith Head Drive, sm all geared m ot or
Features:
Drive Version AG d iffers from version AC du e t o th e use o f sma ll gea red m o to r. The series 50 fra me is
idea l most g eneral purpose con veying ap plications. Add itiona l featu res include a 52 mm crow ned
drive roll, easy belt tracking at the tail end, sealed ball bearings and a stainless steel slider bed faste-
ned to an aluminum T-slot de sig ned fram e. Drive Version AG is also dimen sion a lly mo re co mpa ct th an
version AC due to the use of parallel shaft gearmotors.
Dimensions Techn ical Informat ion Notes
Conveyor length L betw een 310 - 6000 mm a ny increment possib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm others on req uest
Belt Width B-10 mm see pa g e 76
Drive Location hea d rig ht b elow , hea d lef t b elow , hea d lef t show n
head right above, head lef t above
Drive and Speed 180/200 V DC to v=15 m/min (50 ft/min) see pag e 11Stands and Side Rails see page 246
Load Capacity max. 15 kg (33 Ibs) hig her on req uest
B20.00.005
Ta ils
see page 39
19
-
7/30/2019 Mk Conveyor Technology
34/308mk Conveyo r Techno log y 34
GUF-P 2000 AM
Belt Con veyors w ith Of f set Head Drive
Features:
Drive Version AM com bines th e cost ad vant ag es of a hea d d rive w ith t he uno bstructed discha rge end
of a cent er drive. This conveyor is idea l fo r feeding pa rts into or o ut o f eq uipmen t. Addition al feat ures
include a 52 mm crow ned drive roll, easy belt t racking at th e ta il end , sealed ba ll bea ring s and a
stainless steel slider b ed fa stened to an aluminum T-slot desig ned frame. Clea ted belts may be used
w ith th is drive version .
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 735 - 10000 mm a ny increment possib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers on req uest
Belt Width B-10 mm see pa g e 76
Drive Location hea d rig ht , hea d lef t hea d lef t show n
Drive and Speed to 80 m/min (260 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 75 kg (165 Ibs) hig her on req uest
B20.00.003
Ta ils
see page 39
-
7/30/2019 Mk Conveyor Technology
35/308mk Conveyo r Techno logy 35
GUF-P 2000 AS
Belt Con veyors w ith Out side Head Drive
Features:
Drive Version AS features the motor mounted to an aluminum casting outside of the conveyor frame.
This is used in situa tions w here the conveyo r fram e must be un ob structed , or w here the m ot or must
rema in clea n. The conveyor can b e placed very close t o eq uipment . Add itiona l fea tures include a 52 mm
crow ned drive roll, ea sy belt t racking at the ta il end, sealed b all bea ring s and a stainless steel slider
bed fa stened to an aluminum T-slot desig ned frame. Clea ted belts may b e used w ith th is drive version .
Dimensions Technical In fo rmat ion Notes
Conveyor length L b etw een 525 - 10000 mm a ny increment po ssib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers o n req uest
Belt Width B-10 mm see pa g e 76
Drive Location hea d rig ht b elow , hea d lef t b elow , hea d lef t show n
head right above, head lef t above
Drive and Speed t o 80 m/min (260 f t/min) see pa g e 11Stands and Side Rails see page 246
Load Capacity max. 75 kg (165 Ibs) hig her o n req uest
B20.00.008
Ta ils
see page 39
-
7/30/2019 Mk Conveyor Technology
36/308mk Conveyo r Techno log y 36
GUF-P 2000 AU
Belt Conveyors w ith Out side Head Drive
Features:
Drive Version AU fea tures mo to r placement out side of the con veyor frame. This is oft en used in situa -
tions w here the und erside of the conveyor frame must be a s unobstructed as possible, or w here the
mo to r must rema in clean . The conveyor can be placed very close to eq uipmen t a nd transpo rt of ta ll
ob jects is no problem. Addition al fea tures include a 52 mm crow ned drive roll, ea sy belt tracking at
the ta il end, sea led ba ll bearing s and a stainless steel slider b ed fa stened to an aluminum T-slot desi-
g ned frame . Cleat ed b elts may b e used w ith t his drive version .
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 415 - 10000 mm a ny increment possib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers on req uest
Belt Width B-10 mm see pa g e 76
Drive Location hea d rig ht below , hea d lef t below , hea d lef t show n
head right above, head left above
Drive and Speed to 80 m/min (260 f t/min) see pa g e 11Stands and Side Rails see page 246
Load Capacity max. 75 kg (165 Ibs) hig her on req uest
B20.00.020
Ta ils
see page 39
-
7/30/2019 Mk Conveyor Technology
37/308mk Conveyo r Techno logy 37
GUF-P 2000 BA
Belt Conveyors w ith Center Drive w itho ut M ot or, bidirectional
Features:
Drive Version BA is used prima rily w hen slave d riving multiple con veyor lan es in pa rallel using on e
drive mot or. The compa ct desig n, an d t he ab ility to move th e drive locat ion a nyw here along th e
con veyor fram e, simplifies th e int egrat ion of th is con veyor int o ne w or existing eq uipmen t. Addition al
fea tures include a 62 or 88 mm crow ned drive roll (dep end ing on the app lication), sepa rate b elt
tensioning and tracking, sealed ball bearings and a stainless steel slider bed fastened to an aluminum
T-slot de sig ned fram e. Use o f clea te d belts is no t p ossible w ith th is drive version . The drive roll fea tures
a 20 mm ho llow shaft w ith 6 mm keyw ay (DIN 6885).
Dimensions Technical In fo rmat ion Notes
Conveyor length L b etw een 610 - 10000 mm a ny increment po ssib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers o n req uest
Belt Width B-10 mm see pa g e 76
Drive and Speed t o 80 m/min (260 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 75 kg (165 Ibs) hig her o n req uest
B20.00.001
Ta ils
see page 39
-
7/30/2019 Mk Conveyor Technology
38/308mk Conveyo r Techno log y 38
GUF-P 2000 BC
Belt Conveyors w ith Cent er Drive, bidirection al
Features:
mk off ers many m ot or o ptions fo r Drive Version BC, w hich a re sized an d selected fo r each ap plications
ind ividu al speed a nd loa d req uireme nt s. When comb ined w ith Drive Versio n BA, th is version serves a s
the driving conveyor in pa rallel arrang emen ts. The compa ct desig n, a nd the ab ility t o m ove th e d rive
location a nyw here along the conveyor frame, simplifies the integration o f t his conveyor into new or
existing eq uipmen t. Additional fea tures include a 62 or 88 mm crow ned drive roll (dep end ing on
the application), separate belt tensioning and tracking, sealed ball bearings and a stainless steel slider
bed fa stened to an aluminum T-slot desig ned frame . Use of cleat ed belts is not possible w ith this drive
version . The d rive roll fea tu res a 20 mm ho llow sha ft w ith 6 mm keyw ay (DIN 6885).
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L betw een 610 - 10000 mm a ny increment possib le
Conveyor w idth B 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800 mm o thers on req uest
Belt Width B-10 mm see pa g e 76
Drive Location right, left
Drive and Speed to 80 m/min (260 f t/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 75 kg (165 Ibs) hig her on req uest
B20.00.004
Ta ils
see page 39
-
7/30/2019 Mk Conveyor Technology
39/308
52
B+10
B+20
L1
L2
B+15
B+20
50
52
B+10
105
mk Conveyo r Techno logy 39
114
Tail 01 Ident -Nr. B80.00.001
52 mm crow ned roll
Sealed bearings
Belt tension and tracking using using
alignment blocks
Minimum part size for transfer 114 mm
GUF-P 2000
Tails
Tail 02
110
Tail 09 Ident -Nr. B80.00.005
52 mm crow ned roll
Sealed bearings
Belt tension using roll holders
Belt tension and tracking using set
screw s from e nd
Compact tail
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
-
7/30/2019 Mk Conveyor Technology
40/308
52
52
mk Conveyo r Techno log y 40
GUF-P 2000
Tails
Tail 19 Ident -Nr. B80.00.006
52 mm crow ned roll
Sealed bearings
16 mm output shaft 22 mm long for chain
drives or 29 mm long for timing belt drives.
Both include a 5 x 5 x 16 mm shaft key (DIN6885)
Coupling of tw o lanes using on e drive (specify
right, left or both sides)
Tail 11 Ident -Nr. B80.00.007
52 mm crow ned roll
Sealed bearings
Belt tension and tracking using using
roll holders
Roll holders flush
Compact tail
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
-
7/30/2019 Mk Conveyor Technology
41/308
19
B+10
B+20
B+20
12
10
L1
L2
L1
L2
mk Conveyo r Techno logy 41
Tail 13 Ident -Nr. B80.00.008
Rolling nosebar
Roll 19 mm, sealed bearings
Side belt tension using alignment blocks
Adjustment using idler roller from end
Minimum pa rt size for transfer 48 mm
Not e mimimum pu lley diamet er w hen
selecting belt
48
Tail 10
34
Tail 17 Ident -Nr. B80.00.002
Fixed nosebar
Side belt tension using alignment blocks
Adjustment using idler roller from end
Minimum p art size fo r transfer 30 mm
Not e mimimum pulley diamet er w hen
selecting belt
Ma x. be lt speed 10 m/min (33 ft/min)
Requires rubberized roller
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
5.500 mm unrestricted 155 mm 195 mm a luminium
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
-
7/30/2019 Mk Conveyor Technology
42/308
Profile mk 2251
Conveyor frame
cross-section
Belt Conveyors
GUF-P 2041
-
7/30/2019 Mk Conveyor Technology
43/308mk Conveyo r Techno logy 43
The u se of ou r rig id structural
Profile mk 2251 (50 x 80 mm) to
manufacture the conveyor frame
a llow s Syste m GUF-P 2041 con-
veyors to accomodate loads of
up t o 150 kg (330 lbs). The com -
ponents used in the drive and
tail assemblies are also specifi-
cally designed to handle these
lo a ds. The 85 mm drive roll
sta nda rd fo r this system further
ensures that all available motor
pow er is transfered to the b elt .
A further advantage of this
system is an almost unlimited
selection of belt types, including
clea ts a nd sidew alls. Each side of
the conveyor frame fea tures tw o
system T-slo ts (10 mm opening )
for integration into existing
equipment, or for the attach-
ment of stands, side rails and
ot her a ccessories. Addition a l
not ew orthy d eta ils include the
use of galvanized slider beds
for reduced belt friction, sealed
ba ll bearing s and crow ned rol-
lers for simple belt tracking and
alignment.
-
7/30/2019 Mk Conveyor Technology
44/308
Belt Conveyors
GUF-P 2041
Drive Version AA Drive Version AC
Drive Version AF Drive Version AS
Drive Version BC Drive Version CA
-
7/30/2019 Mk Conveyor Technology
45/308mk Conveyo r Techno logy 45
Contents GUF-P 2041
GUF-P 2041 AA Hea d Drive w itho ut Mo to r ex. fo r mult iple la nes 46
GUF-P 2041 AC Hea d Drive 47
GUF-P 2041 AF Hea d Drive d irect , To rq ue Arm 48
GUF-P 2041 AS Outside Hea d Drive 49
GUF-P 2041 BC Center Drive, b id irect io na l 50
GUF-P 2041 CA Driven Ro ller 51
GUF-P 2041 Ta ils 52
-
7/30/2019 Mk Conveyor Technology
46/308mk Conveyo r Techno log y 46
GUF-P 2041 AA
Belt Conveyors w it h Head Drive, w it hou t M ot or
Features:
Drive Version AA is of te n used w here m ultiple la nes a re to be sla ve d riven, e ith er pa rallel or in-line,
w ith a sing le d rive mo to r. The rob ust fram e is idea l for stan d-alone ap plications or fo r int egra ting this
conveyor into new or existing eq uipmen t. Additiona l fea tures include a 85 mm crow ned drive roll,
easy belt tracking at the tail end, sealed ball bearings and a galvanized steel slider bed fastened to an
a luminum T-slot de sig ned fra me. Clea te d b elts ma y be used w ith th is drive version . The 20 mm x
27.5 mm long output shaft includes a 6 x 6 x 22 mm shaft key (DIN 6885).
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L bet w een 500 - 10000 mm a ny increment possib le
Conveyor w idth B 200 to 1200 mm (in 100 mm increments) others on request
Belt Width B-10 mm see pa g e 76
Drive and Speed to 60 m/min (200 ft/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 150 kg (330 Ibs) hig her on req uest
Ta ils
see page 52
Drive shaft on both
sides also available.
Please specify this
w hen inquiring .
B20.40.009
22
-
7/30/2019 Mk Conveyor Technology
47/308mk Conveyo r Techno logy 47
GUF-P 2041 AC
Belt Con veyors w ith Head Drive
Features:
mk of fers a va riety o f m ot or o ptions fo r Drive Version AC, w hich a re sized a nd selected fo r each a ppli-
ca tions specific speed an d loa d requiremen ts. The rob ust fram e is idea l for stan d-a lon e a pplica tions o r
fo r inte grat ing th is con veyor into new or existing eq uipmen t. Addition a l fea tures include a 85 mm
crow ned drive roll, ea sy belt t racking a t t he t ail end , sealed ba ll bea ring s and a g alvanized steel slider
bed fa stened to an aluminum T-slot desig ned frame . Clea ted belts may b e used w ith t his drive version .
Dimensions Technical In fo rmat ion Notes
Conveyor length L betw een 500 - 10000 mm a ny increment po ssib le
Conveyor w idth B 200 to 1200 mm (in 100 mm increments) others on request
Belt Width B-10 mm see pa g e 76
Drive Location hea d rig ht , hea d left hea d left show n
Drive and Speed t o 60 m/min (200 ft /min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 150 kg (330 Ibs) hig her on req uest
Ta ils
see page 52
B20.40.001
22
164
-
7/30/2019 Mk Conveyor Technology
48/308mk Conveyo r Techno log y 48
GUF-P 2041 AF
Belt Co nveyo rs w ith Head Drive direct
Features:
By placing the motor directly onto the drive shaft, this drive version minimizes not only the space
required at the drive yet also the number of moving parts and maintenance requirements.
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L bet w een 650 - 10000 mm a ny increment possib le
Conveyor w idth B 200 to 1200 mm (in 100 mm increments) others on request
Belt Width B-10 mm see pa g e 76
Drive Location head right , head left head left show n
Drive and Speed 3.2 to 55.3 m/min o thers o n req uest
Stands and Side Rails see page 246
Load Capacity max. 100 kg (220 Ibs) hig her on req uest
Ta ils
see page 52
B20.40.008
22
-
7/30/2019 Mk Conveyor Technology
49/308
Features:
Drive Version AS feat ures mo to r pla cemen t o n t he o utside of th e conveyor f rame. This is oft en used
in situa tions w here the conveyor frame must b e uno bstructed, or w here the mo tor must remain clean.
The conveyo r can be pla ced very close t o e qu ipmen t. Add itiona l feat ures include a 85 mm crow ned
drive roll, easy belt tracking at the tail end, sealed ball bearings and a galvanized steel slider bed faste-
ned to an aluminum T-slot designed fram e. Clea ted belts may b e used w ith this drive version .
Dimensions Techn ical Informat ion Notes
Conveyor length L betw een 650 - 10000 mm a ny increment po ssib le
Conveyor w idth B 200 to 1200 mm (in 100 mm increments) others on request
Belt Width B-10 mm see pa g e 76
Drive Location hea d rig ht below , hea d left below , hea d left show n
head right above, head left above
Drive and Speed t o 60 m/min (200 ft /min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 150 kg (330 Ibs) hig her on req uest
Ta ils
see page 52
mk Conveyo r Techno logy 49
GUF-P 2041 AS
Belt Con veyors w ith Out side Head Drive
B20.40.003
22
-
7/30/2019 Mk Conveyor Technology
50/308
Features:
mk off ers a variety o f mo to r opt ion s for Drive Version BC, w hich a re sized a nd selected f or ea ch a ppli-
cations ind ividua l speed a nd loa d req uirements. The comp act d esig n, a nd the a bility t o m ove t he d rive
location a nyw here along the conveyor frame, simplifies the integration of this conveyor into new or
existing eq uipmen t. Add itiona l feat ures include a 88 mm crow ned drive roll, separa te belt t ension ing
an d t racking , sealed ba ll bea ring s and a g alvanized steel slider be d f asten ed t o a n a luminum T-slot
desig ned frame . Use o f clea ted belts is not possible w ith this drive version . The drive roll a lso fe at ures
a 20 mm ho llow shaft w ith a 6 mm keyw ay (DIN 6885).
Dimensions Technical In fo rmat ion Notes
Conveyor length L bet w een 650 - 10000 mm a ny increment possib le
Conveyor w idth B 200 to 1200 mm (in 100 mm increments) others on request
Belt Width B-10 mm see pa g e 76
Drive Location right, left
Drive and Speed to 60 m/min (200 ft/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 150 kg (330 Ibs) hig her on req uest
Ta ils
see page 52
mk Conveyo r Techno log y 50
GUF-P 2041 BC
Belt Co nveyo rs w ith Cent er Drive, bidirectio nal
B20.40.004
22
-
7/30/2019 Mk Conveyor Technology
51/308mk Conveyo r Techno logy 51
GUF-P 2041 CA
Belt Con veyors w ith Driven Roller
Features:
Drive Version CA w ith Driven Roller is the mo st com pa ct d rive version a va ila b le fo r Syste m GUF-P 2041.
By integ rating the mo to r w ithin t he d rive roll itself, t here is no mechan ical inte rference. The integ ra-
tion of this conveyor into equipment is therefore relatively simple.
Dimensions Techn ical Informat ion Notes
Conveyor length L betw een 500 - 3000 mm a ny increment possib le
Conveyor w idth B 200, 250, 300, 350, 400, 450 and 500 mm others on request
Belt Width B-10 mm see pa g e 76
Drive and Speed [m/min] 2.9; 4.1; 5.1; 6.1; 7.4; 8.7; 10.6; 10.7; 13; 13.1;
15.6; 18.7; 22.3; 23; 27.4; 33.6; 48.2 and 59.2 see pag e 11
Stands and Side Rails see page 246
Load Capacity max. on request
Ta ils
see page 52
B20.40.005
22160
-
7/30/2019 Mk Conveyor Technology
52/308
85
85
L1
L2
B+25
B+30
mk Conveyo r Techno log y 52
GUF-P 2041
Umlenkungen
Umlenkung 02 Ident -Nr. B80.07.009
85 mm cylindrical drum
Sealed bearings
Belt tension and tracking using tension shafts
Minimum part size for transfer 180 mm
Not suitable for sideloading
Umlenkung 01 Ident -Nr. B80.07.001
85 mm crow ned roll
Sealed b earing s
Belt tension and tracking using using
alignment blocks
Minimum part size for transfer 180 mm
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
unrest ricted unrest rict ed 150 mm - a luminium
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
3.000 mm unrest rict ed 250 mm 265 mm a luminium
180
180
-
7/30/2019 Mk Conveyor Technology
53/308
22
85
188
228
B+28
L1
B+25
mk Conveyo r Techno logy 53
Umlenkung 13 Ident-Nr. B80.07.006
Drum 22 mmSealed b earing s
Side belt tension using alignment blocks
Adjustment by idler roller from end
Minimum part size for transfer 54 mm
Not e mimimum pulley diamet er w hen
selecting belt
Umlenkung 19
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
unrest rict ed unrest ricted 188 mm 228 mm a luminium
Ident-Nr. B80.07.002
85 mm crow ned roll
Sealed b earing s
20 x 27.5 mm long shaft,
6x6x22 mm shaft key (DIN 6885)
Coupling of tw o lanes using on e driveAdditional output shaft (specify right, left
or both sides)
Conveyor lengths L Conveyor w idth B L1 L2 Material roll holder
3.000 mm unrest ricted 250 mm - a luminium
54
-
7/30/2019 Mk Conveyor Technology
54/308
Conveyor frame
cross-section
Belt Conveyors
GUF-P 2004
-
7/30/2019 Mk Conveyor Technology
55/308mk Conveyo r Techno logy 55
Besides the standard features of
all mk Belt Conveyor Systems
includ ing crow ned rolls for sim-
ple belt t racking an d low friction
slider beds, System GUF-P 2004
is noted for its extremely heavy
frame manufactured using our
structural Profile mk 2004. With
total load capacities to 200 kg
(440 lbs) and frame dimensions
of up to 2.000 mm w ide b y 20
meters long, this conveyor is
ideally suited for transporting
larg e a nd bulky g oo ds. The
105 mm drive roll, w hich is ava i-
lable in either steel or rubberi-
zed depending on load, comple-
te s this conveyo r, w hich is th e
larg est belt con veyor w e of fer.
In addition to the high load
carrying capacity, this conveyor
system can be further enhanced
by the large selection of stan-
dard accessories including side
rails and heavy-duty stands.
-
7/30/2019 Mk Conveyor Technology
56/308
Belt Conveyors
GUF-P 2004
Drive Version AA Drive Version AC
Drive Version AM Drive Version AS
-
7/30/2019 Mk Conveyor Technology
57/308mk Conveyo r Techno logy 57
Contents GUF-P 2004
GUF-P 2004 AA Hea d Drive w itho ut Mo t o r ex. fo r mult iple la nes 58
GUF-P 2004 AC Hea d Drive 59
GUF-P 2004 AM Offset Hea d Drive 60
GUF-P 2004 AS Out sid e Hea d Drive 61
GUF-P 2004 Ta ils 62
-
7/30/2019 Mk Conveyor Technology
58/308mk Conveyo r Techno log y 58
GUF-P 2004 AA
Belt Conveyors w it h Head Drive, w it hou t M ot or
Features:
Drive Version AA is of te n used w here m ultiple la nes a re to be sla ve d riven, e ith er pa rallel or in-line,
w ith a sing le d rive mo to r. The rigid f rame is idea l for inte grat ing this con veyor into new or existing
eq uipmen t. Addition al fea tures include a 105 mm crow ned drive roll, ea sy belt t racking at the ta il
end , sealed ba ll bea ring s and a g alvanized steel slider be d f a stened to an aluminum T-slot desig ned
frame . Clea ted belts may b e used w ith t his drive version . The 22 mm x 32 mm lon g out put sha ft
includes a 6 x 6 x 32 mm shaft key (DIN 6885).
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L bet w een 660 - 20000 mm a ny increment possib le
Conveyor w idth B 200 - 2000 mm (in 100 mm increments) others on request
Belt Width B-50 mm see pa g e 76
Drive Location Output shaft right, left or both sides
Drive and Speed to 60 m/min (200 ft/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 200 kg (440 Ibs) hig her on req uest
Ta ilssee page 62
B20.14.009
Drive shaft on both sides alsoavailable. Please specify this
w hen inquiring .
-
7/30/2019 Mk Conveyor Technology
59/308mk Conveyo r Techno logy 59
GUF-P 2004 AC
Belt Con veyors w ith Head Drive
Features:
mk of fers a va riety o f m ot or o ptions fo r Drive Version AC, w hich a re sized a nd selected fo r each a ppli-
ca tions specific speed an d loa d requiremen ts. The com pa ct fram e is idea l for int egrat ing this con veyor
into new or existing eq uipmen t. Additiona l fea tures include a 105 mm crow ned drive roll, ea sy belt
tracking at the tail end, sealed ball bearings and a galvanized steel slider bed fastened to an aluminum
T-slot desig ned frame . Clea ted belts ma y b e used w ith th is drive version .
Dimensions Technical In fo rmat ion Notes
Conveyor length L betw een 700 - 20000 mm a ny increment po ssib le
Conveyor w idth B 200 - 2000 mm (in 100 mm increments) others on request
Belt Width B-50 mm see pa g e 76
Drive Location hea d rig ht , hea d left hea d left show n
Drive and Speed t o 60 m/min (200 ft /min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 200 kg (440 Ibs) hig her on req uest
Ta ilssee page 62
B20.14.001
164
-
7/30/2019 Mk Conveyor Technology
60/308mk Conveyo r Techno log y 60
GUF-P 2004 AM
Belt Con veyors w ith Of f set Head Drive
Features:
Drive Version AM com bines th e cost a dva nta ge s of a h ea d d rive w ith t he uno bstructed discha rge end
of a center drive. This conveyor is idea l fo r feeding pa rts into or o ut o f eq uipmen t. Additiona l fea tures
include a 105 mm crow ned drive roll, ea sy belt t racking at th e ta il end , sealed b all bea ring s and a
g a lvan ized steel slider b ed f a stened to an aluminum T-slot desig ned frame . Clea ted belts may b e used
w ith t his drive version .
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L bet w een 850 - 20000 mm a ny increment possib le
Conveyor w idth B 200 - 2000 mm (in 100 mm increm en ts) o th ers o n req uest
Belt Width B-50 mm see pa g e 76
Drive Location hea d rig ht , hea d left hea d left show n
Drive and Speed to 60 m/min (200 ft/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 200 kg (440 Ibs) hig her on req uest
Ta ils
see page 62
B20.14.003
-
7/30/2019 Mk Conveyor Technology
61/308mk Conveyo r Techno logy 61
GUF-P 2004 AS
Belt Con veyors w ith Out side Head Drive
Features:
Drive Version AS feat ures mo to r pla cemen t o n t he o utside of th e conveyor f rame. This is oft en used in
situa tions w here the conveyor frame must be unob structed, or w here the mo to r must remain clean.
The conveyo r can be pla ced very close t o e qu ipmen t. Add itiona l feat ures include a 105 mm crow ned
drive roll, easy belt tracking at the tail end, sealed ball bearings and a galvanized steel slider bed faste-
ned to an aluminum T-slot designed fram e. Clea ted belts may b e used w ith this drive version .
Dimensions Technical In fo rmat ion Notes
Conveyor length L betw een 800 - 20000 mm a ny increment po ssib le
Conveyor w idth B 200 - 2000 mm (in 100 mm increments) others on request
Belt Width B-50 mm see pa g e 76
Drive Location hea d rig ht below , hea d left below , hea d left show n
head right above, head left above
Drive and Speed t o 60 m/min (200 ft /min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 200 kg (440 Ibs) hig her on req uest
Ta ils
see page 62
B20.14.002
-
7/30/2019 Mk Conveyor Technology
62/308
252
105
267
B+25
B+30
105
252
267
B+25
B+30
mk Conveyo r Techno log y 62
Tail 01 Ident -Nr. B80.02.004
105 mm crow ned roll
Sealed b earing s
Belt tension and tracking
using alignment blocks
Minimum part size for
transfer 220 mm
22 0
GUF-P 2004
Tails
Tail 09 Ident -Nr. B80.02.005
105 mm crow ned roll
Sealed bearings
22 x 32 mm long output shaft,
6x6x32 mm shaft key (DIN 6885)
Coupling of t w o lanes using one
drive
Output shaft left , right or both
sides possible
-
7/30/2019 Mk Conveyor Technology
63/308mk Conveyo r Techno logy 63
-
7/30/2019 Mk Conveyor Technology
64/308
Conveyor frame
cross-section
Belt Conveyors
KGF-P 2040
-
7/30/2019 Mk Conveyor Technology
65/308mk Conveyo r Techno logy 65
The con veyo r syste m KGF-P 2040
is based on our Profile Series 40,
an d is compa tible w ith all ot her
mk conveyo r syste ms. The e xte-
rior profile frame features 10 mm
T-slo ts w hich a llow fo r th e d irect
mounting of additional accesso-
ries such as side rails, sensors,
et c. The st ructura l pro files used
ensure rig id construction w ith
excellent loa d bea ring capa cities,
w hereby the indicat ed va lues
for maximum loads and speeds
are directly depen dent , a nd
th us vary. The con veyo r fea tu res
a 20 mm rolling nosebar
w hich a llow s for the t ransfer
of small parts. Automatic belt
tensioning is built into the tails
w hich compensates for normal
belt stretch, w hile a t t he same
time ensuring a fixed, unchan-
g ing insta lled d imen sio n. The
compact center drive features
no external protrusions w hen
using our standard motor.
-
7/30/2019 Mk Conveyor Technology
66/308
Belt Conveyors
KGF-P 2040
Drive Version BI
-
7/30/2019 Mk Conveyor Technology
67/308mk Conveyo r Techno logy 67
Contents KGF-P 2040
KGF-P 2040 BI Center Drive, reversib le 68
KGF-P 2040 St a nd s a nd Ord er Exa mple 69
-
7/30/2019 Mk Conveyor Technology
68/308mk Conveyo r Techno log y 68
KGF-P 2040 BI
Curved belt con veyor w ith Cent er Drive, reversible
Features:
For t his con veyor mk o ffe rs Drive Version BI, fe a turing usab le b elt w idt hs o f 300, 400, 500 a nd 600 mm
fo r a 90 curve. The com pa ct construction simplifies the integ ration of th e conveyor w ithin existing
lines. The 55 mm d rive roll ensures go od grip an d eff icient mo to r pow er tran sfer.
Dimensions Techn ical In fo rmat ion Notes
Conveyor Angle 90 o thers o n req uest
Usable Widths B 300 at Ra= 600 mm, Ri=300 mm, FB=706 Ident .-Nr. : B20.40.023
400 at Ra= 900 mm, Ri= 500 mm, FB=1006 Ident .-Nr.: B20.40.022
500 at Ra= 900 mm, Ri= 400 mm, FB=1006 Ident .-Nr.: B20.40.021
600 at Ra= 900 mm, Ri= 300 mm, FB=1006 Ident .-Nr.: B20.40.020
Drive Location below, center
Drive and Speed 5 to 30 m/min in Rm others o n req uest
Stands sta nda rd, or w ith b elt change support
Load Capacity max. to 30 kg (65 Ibs), depending on
conveyor angle, speed and product
Belts see page 76
B20.40.020 for 90 curve, B20.40.021 for 180curve
-
7/30/2019 Mk Conveyor Technology
69/308mk Conveyo r Techno logy 69
KGF-P 2040
Stands and Order Example
Stands
standard w ith belt change suppor t
Order Example
In order to properly quote and manufacture your
conveyor w e require the f ollow ing informa tion:
KGF-P 2040
Version Ra 900 / Ri 500
Speed 15 m/min
Usable Width B = 400 mm
Belt type
Sta nds w ith (or w itho ut)belt change support
Height H = 800 mm
Radius Versions curve 180Radius Versions curve 90
-
7/30/2019 Mk Conveyor Technology
70/308
Conveyor frame
cross-section
Wear Strip mk 1005
Profile for conveyor frame mk 2001
Belt Conveyors
DGF-P 2001
-
7/30/2019 Mk Conveyor Technology
71/308mk Conveyo r Techno logy 71
Conveyor System DGF-P 2001 is
primarily designed for the trans-
port of pallets. It is ideally suited
to assembly areas, such as can be
found in the electronics industry
fo r exam ple. The small diame ter
ta il drum a llow s for the transfer
of relatively short pallets. Belt
tensioning is accomplished using
th e low er ta il ret urn roller. As
the roll holders are not moved,
a fixed overall length is achieved.
The belts run en tirely o n sta nda rd
mk UHMW w ea r strips, w hereby
a maximum total load of 15 kg
(33 lbs) is possible. Pallets for the
DGF-P 2001 conveyors are supplied
by mk in aluminum, as a standard.
Ma chining is th erefore a ccording
to the custom ers w ishes.
-
7/30/2019 Mk Conveyor Technology
72/308
Belt Conveyors
DGF-P 2001
Drive Version AC
-
7/30/2019 Mk Conveyor Technology
73/308mk Conveyo r Techno logy 73
Contents DGF-P 2001
DGF-P 2001 AC - Dua l Belt Co nveyo r w ith Hea d Drive - 74
DGF-P 2001 Pa llet s 75
-
7/30/2019 Mk Conveyor Technology
74/308mk Conveyo r Techno log y 74
DGF-P 2001 AC
Dual Belt Con veyor w ith Head Drive
Features:
The b elts of th e DGF-P 2001 dua l lane conveyo r ride on UHMW w ea r strips 4.5 mm t hick x 5 mm
ta ll inte grat ed side rails. The recommen ded pa llet w idt h is the conveyor w idt h B-11 mm (2 mm g ap ).
The compa ct conveyo r frame is idea l fo r int egrat ing this con veyor into new or existing eq uipmen t.
The 58 mm drive rolls ensure sufficient mo to r pow er tra nsmission .
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L bet w een 300 - 2000 mm a ny increment possib le
Conveyor w idth B 100, 125, 150, 175, 200 and 250 mm
Belt Width 18 mm see pa g e 76
Drive Location hea d rig ht , hea d left hea d left show n
Speed to 15 m/min (50 ft/min)
constant or variable
Stands and Side Rails see page 246
Load Capacity max. 15 kg (33 Ibs) hig her on req uest
B20.11.701
-
7/30/2019 Mk Conveyor Technology
75/308mk Conveyo r Techno logy 75
DGF-P 20 0 1
Pallets
Rew orkUpon request w e can rewo rk the pa llet fo r your
particular application. We can also provide pallets
per your draw ing s.
As as standard, the pallets for Conveyor System
DGF-P 2001 are manufactured using aluminum
(2017A, o r 3.1325). Dimensiona lly t he w idt h is
fixed in relat ion t o th e con veyor (B-11 mm ). The
minimum length is 90 mm. Depending on the
product to be conveyed, anodized aluminum or
ot her pa llet m at erials are a lso ava ilab le. Below is
a representa tion o f o ur sta nda rd, w ith custo mer-
specific to oling show n a t left.
Conveyor and pallet cross-section
-
7/30/2019 Mk Conveyor Technology
76/308
Belt type KGF-P DGF-P Surface Allow able Thickn. Propert ies Min. Accumu- Material Belt
2040 2001 Texture Temperature (mm) Pulley lat ion Cate-
suitable suitable gory
smooth -30 - + 100 C 0,6 a nt ista t ic 8 mm Urethane 1
structure -30 - + 100 C 1,2 antista t ic, 8 mm Urethane 3
laterally stiff
w oven -30 - + 100 C 1,2 ant ista t ic, 8 mm Urethane 2laterally stiff
smooth -30 - + 100 C 1,4 antista t ic, 8 mm Urethane 3laterally stiff
smooth -30 - + 100 C 1,5 a nt ista t ic 8 mm Urethane 3
w oven -30 - + 100 C 2,0 antista t ic, 20 mm NBR 3
cut resistant
Tra nsilo n E 2/1 U0/U2 HACCP w hit e FDA, K10200
Tra nsilo n E 3/1 U0/U2 RF bro w n FDA, K10268
Tra nsilo n E 3/2 U0/U0 co lor less FDA, K10203
Tra nsilo n E 3/2 U0/U2 HACCP w hit e FDA, K10214
Tra nsilo n E 3/2 U0/U2 HACCP-FF blue FDA, K10269
Tra nsilo n E 3/2 U0/G8 NSTR g ree n, K10256
Continuous
Accumulation
The belt types show n below are our sta nda rds, and are
suita ble for mo st ap plicat ions. In a dd ition to these w e
can offer a variety of special belts.
Applicationspecific belts can include, for example, teflon
be lts, velour b elts or o th ers w ith specific chemica l resi-
stance properties. When selecting a belt, please note
w hether accumulat ion is required.
mk Conveyo r Techno log y 76
Belt Conveyors
Belt Types
-
7/30/2019 Mk Conveyor Technology
77/308
Tran silo n E 4/1 U0/V5H MT g ree n, K10201
Tra nsilon E 4/2 U0/U2 MT-HACCP w hite FDA, K10270
Tra nsilon E 4/2 U0/U2 MT-HACCP-FF blue FDA, K10271
Tra nsilo n E 5/2 0/0 co lor less, K10266
Tra nsilo n E 5/2 0/V5 g ree n, K10202
Tra nsilo n E 5/2 0/V5H MT black, K10261
Tra nsilo n E 6/2 U0/U2 M g ree n FDA, K10241
Tra nsilo n E 8/2 U0/U2 g ree n FDA, K10205
Belt type KGF-P DGF-P Surface Allow able Thickn. Propert ies Min. Accumu- Material Belt
2040 2001 Texture Temperature (mm) Pulley lat ion Cate-
suitable suitable gory
smooth -10 - + 70 C 1,1 a nt ista t ic, 20 mm PVC 1side-discharge
suitable
smooth -30 - + 100 C 1,4 ant ist a t ic 8 mm Uretha ne 3
smooth -30 - + 100 C 1,4 ant ist a t ic 8 mm Uretha ne 3
w oven -10 - + 70 C 1,4 a nt ista t ic, 20 mm Polyester 1quiet
smooth -10 - + 70 C 1,9 a nt ista t ic, 20 mm PVC 1quiet
smooth -10 - + 70 C 1,9 antist a t ic, 40 mm PVC 1troughability,
quiet
smooth -30 - + 100 C 1,9 ant ist a t ic, 50 mm Uretha ne 4
extremely
laterally stiff,
inclined
transport
smooth -30 - + 100 C 1,4 ant ist a t ic, 20 mm Uretha ne 2latera lly stiff
mk Conveyo r Techno logy 77
Belt Conveyors
Belt Types
-
7/30/2019 Mk Conveyor Technology
78/308
Tra nsilo n E 8/2 U0/V5 gree n, K10204
Tra nsilo n E 8/2 U0/V20 AR gre en , K10207
Tra nsilo n E 8/2 U0/V/U2H MT g ree n, K10217
Tra nsilo n E 8/2 0/U10 S/LG g ree n, K10253
Tra nsilo n E 8/H U0/U2 MT-HACCP w hite FDA, K10252
Tra nsilo n E 8/H U0/U2 MT-HACCP b lue FDA, K10272
Tra nsilo n E 8/H U0/V10S-LG b la ck, K10257
Tra nsilo n NOVO 25-HC b lack, K10206
Belt type KGF-P DGF-P Surface Allow able Thickn. Propert ies Min. Accumu- Material Belt
2040 2001 Texture Temperature (mm) Pulley lat ion Cate-
suitable suitable gory
smooth -10 - + 70 C 2,1 antista t ic, 50 mm PVC 2
quiet,
good traction,
structure -10 - + 70 C 4,7 antista t ic, 50 mm PVC 3
very good
traction,
incline tran sport
smooth -10 - + 70 C 1,5 antista t ic, 50 mm Urethane 2cut resistant
structure -30 - + 100 C 2,1 antista t ic, 40 mm Urethane 4
good traction,
incline transport,
oily or greasy
products
smooth -30 - + 100 C 1,4 antista t ic, 8 mm Urethane 2laterally stiff,
Hot Water/
Steam resistant
smooth -30 - + 100 C 1,4 antista t ic, 8 mm Urethane 3laterally stiff,
Hot Water/
Steam resistant
structure -10 - + 70 C 2,3 antista t ic, 40 mm PVC 2
laterally stiff
felt -10 - + 70 C 2,5 antista t ic, 40 mm Polyester 2conductive (HC)
mk Conveyo r Techno log y 78
Belt Conveyors
Belt Types
-
7/30/2019 Mk Conveyor Technology
79/308mk Conveyo r Techno logy 79
Belt Conveyors
Belt Types with Cleats
Cleat material Temperature range
PVC -10 t o + 70 C
PU -30 to + 80 C
PE -30 t o + 100 C
When selecting a cleat, please ensure that the
belting and the cleat material are the same.
Segmen ted lat eral cleat s as w ell as comb inat ions
of la teral a nd lon g itud ina l clea ts a re po ssible. The
distance from the cleats to the belt edge must be
at least 2 mm.
The a dh esive joints o f the clea ts g enerally ha ve a
more limited temperature range than the belt and
cleat material itself.
Longitudinal Cleats, topside
are used primarily for guiding the belt, e.g. as
in inclined conveyors (for these applications, the
fo llow ing prof iles ma y be u sed: K6, K10 and K13)
Sidew alls, topside
can be used instead of side guides and are used
in particular in inclined conveyors (for these
a pplications, the fo llow ing profiles may be used:
Fw 2 x 30, Fw 2 x 40 an d Fw 2 x 60).
Other cleat profiles available on request.
Lateral Cleats, topside
act as a pusher for the transported product,
especially on inclined conveyors (for these
ap plications, the fo llow ing profiles may be used:
K6, K10, K13, K15, K17, K30, F20/3, F30/8, T20U,
T30U, T40U, T50U, T60U, T20, L40, L60)
Longitudinal Cleats, underside
are a belt guide option and are usually used if
lateral forces act on the belt. (for these
a pplications, the fo llow ing profiles may be used:
K6, K10 and K13). Unevenness can occur in the
conveyor belt in the area of longitudinal cleats.
GB
GB
SB
SA
GB
SA1
SA1
GB
SA2
45
A
-
7/30/2019 Mk Conveyor Technology
80/308
Cleat t ype Color Weight Lateral Longitudinal
PVC PU dmin SA1 min dmin approx. mm
Drum green w h it e colorl. green w hit e app.g/ m appx.mm in mm Underside Topside
K6 25 30 30 40 30
K10 60 50 30 70 60
K13 100 80 30 100 70
K15 120 90 30 100 80
K17 180 110 30 110 90
K30 470 180 50 230 180
F20/3 75 70 30 70 50
F30/8 290 120 45 120 90
mk Conveyo r Techno log y 80
Belt Conveyors
Cleat Types
-
7/30/2019 Mk Conveyor Technology
81/308
Cleat type Color Weight Lateral
PVC PU dminDrum
green w hite colorl. green w hite app.g/m appx.mm
T20U 140 50
T30U 180 50
T40U 220 50
T50U 250 50
T60U 280 50
T20 160 90
mk Conveyo r Techno logy 81
Belt Conveyors
Cleat Types
-
7/30/2019 Mk Conveyor Technology
82/308
Cleat t ype Color Weight Lateral
PVC PU dminDrum
green w hite colorl. green w hite app.g/m appx.mm
L40 470 80
L60 600 80
Cleat t ype Color Weight Lateral Longitudinal
PVC PU dmin SA1 min dmin approx. mm
Drum green w h it e colorl. green w hit e app.g/ m appx.mm in mm Underside Topside
Fw 2 Height = 30 mm 130 80
Height = 40 mm 170 125
Height = 60 mm 240 150
mk Conveyo r Techno log y 82
Belt Conveyors
Cleat Types
-
7/30/2019 Mk Conveyor Technology
83/308mk Conveyo r Techno logy 83
-
7/30/2019 Mk Conveyor Technology
84/308
Belt Conveyors
Application Examples
Combination of t w o
GUF-P 2000 for conveying
slanted transport tanks
GUF-P Mini for integration into an existing system
as transverse conveyor and singulator
Mobile GUF-P 2000 featuring
discharge chut e w ith
variable inclination angle
-
7/30/2019 Mk Conveyor Technology
85/308mk Conveyo r Techno logy 85
GUF-P 2000 as transverse conveyor and
singulat or follow ing a cooling sect ion
Conveyor belt GUF-P 2000 for piston rods w ith
pneumatic pressure cylinders mounted on the
side for securing the product
GUF-P 2000 w it h mechanism for folding and aligning
paper bags before the filling process
-
7/30/2019 Mk Conveyor Technology
86/308
Belt Conveyors
Application Examples
GUF-P 2041 w it h
pneumatic deflector
GUF-P 2000 w it h comb-sty le cleated belt
GUF-P 2041 w it h
adjustable side rail
-
7/30/2019 Mk Conveyor Technology
87/308mk Conveyo r Techno logy 87
GUF-P 2000 as t ransverse
conveyor and singulator
fol low ing a cooling sect ion
GUF-P 2000 w ith roll ing nosebarRecirculating system using tw o parallel
GUF-P 2000 running in opposite directions
GUF-P 2000 w it h dr ip pan and end stop
-
7/30/2019 Mk Conveyor Technology
88/308
Belt Conveyors
Application Examples
GUF-P 2004 w idt hs up t o 2 m and
belt lengths up to 20 m possible
GUF-P 2041 w it h dr ip pan
and longitudinal cleats
GUF-P 2041 w it h gu ides for
w ork piece separat ion
-
7/30/2019 Mk Conveyor Technology
89/308mk Conveyo r Techno logy 89
GUF-P 2041 w it h belt for conveying
sharp-edged products, e.g. metal stampings
GUF-P 2004 w it h separate
working and return side of belt
Tw o GUF-P 2041 in tandem arrangement w it h mobile stand system for
mobile double feeding of a system
-
7/30/2019 Mk Conveyor Technology
90/308
Belt Conveyors
Application Examples
Nuts for the installation side rails or sensor
plates can be inserted in the T-slots according
to t he customers w ishes
Several conveyor lanes linked
via a center drive
Tw o conveyor belts driven by
one motor at the head drive
-
7/30/2019 Mk Conveyor Technology
91/308mk Conveyo r Techno logy 91
180KGF-P 2040 w it h secured guard
and inner radius 0 mm
KGF-P 2040 w it h Dr ive Version BI
180 KGF-P 2040
w ith side rail
The flat, side end of the KGF-P 2040
ensures short transfer paths
-
7/30/2019 Mk Conveyor Technology
92/308
-
7/30/2019 Mk Conveyor Technology
93/308mk Conveyo r Techno logy 93
Standard DGF-P 2001 w ith pallets for insert ing
printed circuit board components
DGF-P 2001 w it h side rail
for ext ra-w ide products
Combinat ion of tw o GUF-P 2000 arranged in parallel. The space
betw een the belt s enables access f rom underneath
-
7/30/2019 Mk Conveyor Technology
94/308
mk M odular Belt Conveyors
mk Conveyo r Techno log y 94
-
7/30/2019 Mk Conveyor Technology
95/308mk Conveyo r Techno logy 95
Cont ents mk M od ular Belt Conveyors
MBF-P 2040.02 96
Mo dula r Belt Co nveyo rs Applica t io n Exa mples 104
-
7/30/2019 Mk Conveyor Technology
96/308
Conveyor frame cross-section
M odular Belt Conveyors
M BF-P 2040.02
Wear St rip m k 1040.12
Profile for conveyor framemk 2040.41
Wear St rip m k 1040.13
Wear Strip mk 1040.10
-
7/30/2019 Mk Conveyor Technology
97/308mk Conveyo r Techno logy 97
Conveyor System MBF-P 2040.02
w ith mod ular b elting and cleanly
integrated drive assemblies
distinguishes itself w ith high loa d
capa cities even at n arrow belt
w idt hs. The be lting is po sitively
driven and cannot deviate from
its direction of travel. As a result,
parts may be discharged off the
side of th e conve yor. The b elting
ma terial is very low friction a nd
extremely resistan t t o w ea r. With
the selection of belting materials,
this conveyor system has applica-
tions in the food industry, does
w ell in highe r tempe rature envi-
ronments and has good chemical
resistance. Belt accessories include
sidew alls and lat eral clea ts.
Maintenance operations such as
belt tensioning or replacement
of individual links are quick and
simple.
-
7/30/2019 Mk Conveyor Technology
98/308
M odular Belt Conveyors
M BF-P 2040.02
Drive Version AC Drive Version AS
-
7/30/2019 Mk Conveyor Technology
99/308mk Conveyo r Techno logy 99
Con t ent s M BF-P 20 40 .02
MBF-P 2040.02 AC Hea d Drive 100
MBF-P 2040.02 AS Outside Hea d Drive 101
MBF-P 2040.02 Mo dula r Belt s 102
-
7/30/2019 Mk Conveyor Technology
100/308mk Conveyo r Techno log y 100
M BF-P 2040.02 AC
M od ular Belt Con veyors w ith Head Drive
Features:
mk of fers a va riety of mo to r opt ion s for Drive Version AC w hich a re sized a nd selected f or ea ch a ppli-
cations specific speed a nd loa d requiremen ts. The m olded drive sprockets positively eng ag e w ith the
und erside of the belt a nd ensure proper grip a nd tracking . The com pa ct f rame d esig n simplifies int e-
grat ion o f t he conveyor int o ne w or existing eq uipmen t. Use of clea ted belts is possible w ith t his drive
version.
Dimensions Techn ical In fo rmat ion Notes
Conveyor length L bet w een 475 - 10000 mm a ny increment possib le
Conveyor w idth B 210 to 1010 mm (in 50 mm increments) o thers on request
Modular Belt w idth B-10 mm see pa g e 102
Drive Location right, left
Drive and Speed to 30 m/min (100 ft/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max. 150 kg (330 lbs) hig her on req uest
B20.40.801
-
7/30/2019 Mk Conveyor Technology
101/308mk Conveyo r Technolo gy 101
M BF-P 2040.02 AS
M od ular Belt Con veyors w ith O ut side Head Drive
Features:
Drive Version AS feat ures mo to r pla cemen t o n t he o utside of th e conveyor f rame. This is oft en used
in situa tions w here the conveyor frame must b e a s unobstructed as po ssible, or w here the mo tor must
remain clea n. The o verall height of the conveyor is held t o an ab solute minimum. The m olded drive
sprockets positively eng ag e w ith t he und erside o f th e belt an d ensure prop er grip an d t racking . Use of
clea te d b elts is possible w ith th is drive version .
Dimensions Technical In fo rmat ion Notes
Conveyor length L betw een 610 - 10000 mm a ny increment po ssib le
Conveyor w idth B 210 to 1010 mm (in 50 mm increments) o thers on request
Modular Belt width B-10 mm see pa g e 102
Drive Location right, left
Drive and Speed t o 30 m/min (100 ft/min) see pa g e 11
Stands and Side Rails see page 246
Load Capacity max . 150 kg (330 lbs) hig her on req uest
B20.40.802
-
7/30/2019 Mk Conveyor Technology
102/308
Belt t ype MB1 MB2
MB 200 - 1000 mm 194 - 992 mm
Cleat Height, H1 25, 50 mm (o r no ne) 25, 51, 76 (o r no ne)
Cleat Spacing, A3 25 mm increment s 27.2 mm increment s
Color w hit e, g reen w hit e, b lue
Pitch, P 25 mm 27.2 mm
Belt Thickness 9 mm 9.8 mm
Min. Cleat Edge Clearance, A1 0 mm 18 mm
Material PE, PP, POM PE, PP, POM
FDA/USDA Suitability pa rt ia l pa rt ia l
Technical Properties PP PP
+ 5 - + 105 C + 1 - + 104 C
PE PE
- 70 - + 65 C - 46 - + 66 C
POM POM
- 45 - + 90 C - 46 - + 93 C
hig h w ea r resist a nce hig h w ea r resist a nce
low f rict io n low f rict io n
M BF-P 2040.02
Modular Bel ts
Per custo mer req uest, mk offers tw o
types of m od ular belting w ith d ifferent
pitches.
MB 1 MB 2
mk Conveyo r Techno log y 102
-
7/30/2019 Mk Conveyor Technology
103/308mk Conveyo r Technolo gy 103
-
7/30/2019 Mk Conveyor Technology
104/308
M odular Belt Conveyors
A pp l icat ion Exam ples
Shor t MBF-P 2040.02 w ith dr ive version AS
MBF-P 2040.02 w it h special side
rail, belt w ith 10% open area
MBF-P 2040.02 w it h side
flights and cleats
-
7/30/2019 Mk Conveyor Technology
105/308mk Conveyo r Technolo gy 105
MBF-P 2040.02 w ith belt ing suitable for f ood
MBF-P 2040.02 w it h cleats
for loosening and t ransport ing
smaller products
MBF-P 2040.02
drive version AS
MBF-P 2040.02
drive version AC
-
7/30/2019 Mk Conveyor Technology
106/308
mk Incline Conveyors
mk Conveyo r Techno log y 106
-
7/30/2019 Mk Conveyor Technology
107/308
Con t ent s m k Incline Con veyors
KFG-P 2000 108
KFM-P 2040.86 118
KFS-P 2040.86 126
Incline Co nveyo rs Applica t io n Exa mples 134
mk Conveyo r Technolo gy 107
-
7/30/2019 Mk Conveyor Technology
108/308
Conveyor frame cross-section
Incline Conveyors
K FG-P 2000
w it h sidew a ll w ith SF2.1
-
7/30/2019 Mk Conveyor Technology
109/308mk Conveyo r Technolo gy 109
With its compact design using
our structural aluminum Profile
mk 2000, Conveyor System KFG-P
2000 is ideally suited for continu-
ous duty applications in multiple
shift environments. Used prima-
rily for the transport of small
parts, the belt is guided through
th e incline b y w elded-on V-g uide s.
As w ith a ll mk con veyors, belt
alig nment is easy w ith o ur sta n-
da rd crow ned rollers. Additiona l
features include a stainless steel
slider bed mounted to the con-
veyor fram e w hich reduces w ear
on the belt and the use of sealed
ball bearings for overall conveyor
life and performance. Using all
the inherent benefits of modular
construction w ith o ur mk Prof ile
Techno log y System, th is conveyo r
can be readily integrated into
new or existing equipment, o r
be used as a free-standing con-
veyor for bulk handling and loa-
ding ap plications.
-
7/30/2019 Mk Conveyor Technology
110/308
Incline Conveyors
K FG-P 2000
Drive Version AC Drive Version AF
Drive Version AS Drive Version AU
-
7/30/2019 Mk Conveyor Technology
111/308mk Conveyo r Technolo gy 111
Contents KFG-P 2000
KFG-P 2000 AC Hea d Drive 112
KFG-P 2000 AF Hea d Drive d irect 113
KFG-P 2000 AS Out side Hea d Drive 114
KFG-P 2000 AU Outside Hea d Drive 115
KFG-P 2000 St a nds a nd Side Ra ils 116
KFG-P 2000 Belt Types 117
-
7/30/2019 Mk Conveyor Technology
112/308
mk Conveyo r Techno log y 112
K FG-P 2000 AC
Belt Con veyors w ith Head Drive
Features:
mk of fers a va riety of mo to r opt ion s for Drive Version AC w hich a re sized a nd selected f or ea ch a ppli-
cations specific speed a nd loa d req uirements. The 52 mm drive roll provides go od belt w rap a nd
efficient m ot or pow er transmission , an d t he compa ct con struction simplifies th e int egrat ion o f th e con -
veyor into existing equipment.
Dimensions Techn ical In fo rmat ion Notes