MIXING SYSTEMS SELECTION GUIDE · 2021. 2. 4. · SPEC MIX is the Innovator of Material Mixing...

MIXING SYSTEMS SELECTION GUIDE

2

TABLE OF CONTENTS

INTRODUCTION & OSHA FACT SHEET…………………………………………………………….....Page 3

GRAVITY MIXING SYSTEMS....................................................................................................................Page 4G7000………………………………………………………………………………………………Page 5

Ten Bagger………………………………………………………………………………………….Page 6

Split Silo…………………………………………………………………………………………….Page 7

Load N Go.................................................................................................................................................Page 8

POWER AUGER MIXING SYSTEMS..........................................................................................................Page 9PA1000 Power Auger…………………………………………………………………………...........Page 10

PA4000 Power Auger…………………………………………………………………………...........Page 11

CONTINUOUS MIXING SYSTEMS.............................................................................................................Page 12D2W Continuous Mixer……………………………………………………………………………....Page 13

D2W Gas Powered Continuous Mixer........................................................................................................Page 14

D2W Workhorse Mixer…………………………………………………………………………….....Page 15

MIXING SYSTEMS ACCESSORIES & DUST CONTROL MITIGATION.........................................................Page 16-18

SPEC MIX PREBLENDED MATERIALS………………………………………………………..............Page 19

TECHNICAL SUPPORTContact your local SPEC MIX RepresentativeContact your local SPEC MIX DealerVisit www.specmix.com

https://www.specmix.com/contact-rep/https://www.specmix.com/dealer-finder/http://www.specmix.com

®SPEC MIX is the Innovator of Material Mixing Systems for Every Jobsite

2 3

SPEC MIX® Mixing Systems are available in numerous sizes and capacities for mobility and flexibility that optimize your mixing station. Decrease labor and product waste, increase safety and maximize productivity with a mixing system specifically chosen for your project. We are your solution for every job!

FactSheetOSHA’s Crystalline Silica Rule: ConstructionOSHA is issuing two standards to protect workers from exposure to respirable crystalline silica—one for construction, and the other for general industry and maritime—in order to allow employers to tailor solutions to the specific conditions in their workplaces.

Who is affected by the construction standard?About two million construction workers are exposed to respirable crystalline silica in over 600,000 workplaces. OSHA estimates that more than 840,000 of these workers are exposed to silica levels that exceed the new permissible exposure limit (PEL).

Exposure to respirable crystalline silica can cause silicosis, lung cancer, other respiratory diseases, and kidney disease. Exposure can occur during common construction tasks such as using masonry saws, grinders, drills, jackhammers and handheld powered chipping tools; operating vehicle-mounted drilling rigs; milling; operating crushing machines; and using heavy equipment for demolition or certain other tasks.

Without dust controls, using a handheld power saw to cut concrete can expose workers to high levels of respirable crystalline silica.

Pho

to: N

IOS

H

The construction standard does not apply where exposures will remain low under any foreseeable conditions; for example, when only performing tasks such as mixing mortar; pouring concrete footers, slab foundation and foundation walls; and removing concrete formwork.

What does the standard require?The standard requires employers to limit worker exposures to respirable crystalline silica and to take other steps to protect workers.

The standard provides flexible alternatives, especially useful for small employers. Employers can either use a control method laid out in Table 1* of the construction standard, or they can measure workers’ exposure to silica and independently decide which dust controls work best to limit exposures to the PEL in their workplaces.

Regardless of which exposure control method is used, all construction employers covered by the standard are required to:

• Establish and implement a written exposure control plan that identifies tasks that involve exposure and methods used to protect workers, including procedures to restrict access to work areas where high exposures may occur.

• Designate a competent person to implement the written exposure control plan.

• Restrict housekeeping practices that expose workers to silica where feasible alternatives are available.

• Offer medical exams—including chest X-rays and lung function tests—every three years for workers who are required by the standard to wear a respirator for 30 or more days per year.

LEARN MORE >>

MIX WITH PRODUCTIVITY & EFFICIENCYFOR PROFITABILITY. Productivity and efficiency are directly related to the profitability of any project. SPEC MIX® mixing systems are proven to increase jobsite productivity of an entire crew by making the material mixing station more efficient, no matter who is making product. When paired with any SPEC MIX preblended product, materials are mixed consistently, within minutes without any heavy lifting or shoveling, while reducing the risk of back injury.”With SPEC MIX products and mixing systems on site it’s quite simple—you cut waste, labor and downtime!

MATERIAL MIXING OPTIMIZED FOR ANY SIZED JOB, ANY LOCATION. Considering each project brings new challenges, the versatility of SPEC MIX Material Mixing Systems provides contractors with ideal solutions for the toughest and most diverse jobsite conditions. Our systems make your mixing station highly mobile, and require a minimal amount of space, to position the mixing station near the craftsmen doing the work. Whether your mixing on a commercial or residential job, indoors and outdoors or floor-to-floor—SPEC MIX gets the job done!

WORK SMART. WORK SAFE. When it comes to mixing materials and jobsite safety, we’re a contractor’s best resource. SPEC MIX Material Mixing Systems not only keep a jobsite clean and organized, they’re engineered to comply with OSHA regulations to reduce a worker’s exposure to risk and injury. From erecting a system, to loading it with bulk bags, to mixing product, SPEC MIX provides Operations & Safety Manuals in English and Spanish to maximize operator safety.

WORK DUST-FREE. With OSHA’s new 1926.1153 - Respirable crystalline silica standard in place, SPEC MIX offers contractors a variety of mixing systems with engineering controls that mitigate dust. We have also provided a SPEC MIX Material Use Guide, complete with a Written Exposure Control Plan, to further establish a safe, low-dust work environment.

https://www.osha.gov/Publications/OSHA3681.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/2018-Gravity-Silo-Safety-Manual_low_res.pdfhttps://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1153https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1153https://www.specmix.com/material-use-guide/

4

THE G7000 SILO, THE BACKBONE OF OUR SILO LINE

GRAVITY MIXING SYSTEMS

4

The Ultimate Contractor Tool for Maximizing Safety, Production and Profitability.

45

G7000

4

The SPEC MIX G7000 silo system is the ultimate contractor tool for maximizing the production and profitability of any workforce. The G7000’s design is simple, yet highly efficient when producing dry, cement-based products on site. Whether the project is small or large, the G7000 system will greatly reduce the cost of labor and the amount of waste (sand, cement, paper bags) common with conventional batching methods.

G7000The Standard for Preblended Mixing.

G7000 ACCESSORIES

UPPER SHROUD MIXER SHROUD

Transporting Video

Loading Video

Operation Video

Tech Data Sheet

Operations & Safety Manual

Material Use Guide

SUPPORT CENTER

FOOTPRINT 8 ft 2 in x 8 ft 2 in (2.4 m x 2.4 m)

WEIGHT EMPTY 2,900 lb (1,315.4 kg)

WEIGHT FULL Up to18,000 lb (8,164.6 kg)

CAPACITY 5 - 3,000 lb (1,360.7 kg) bulk bags

SWIVEL GATE & EXTENDED HANDLE

https://www.specmix.com/g7000/https://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.specmix.com/wp-content/uploads/2021/01/G7000.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/2018-Gravity-Silo-Safety-Manual_low_res.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdf

6

TEN BAGGER

The SPEC MIX Ten Bagger silo system is ideal for the largest projects where high production at the mixing station is not a luxury—it is a necessity to meet the project’s scope. With up to a 10 bulk bag capacity, this silo feeds the largest crews for a longer period of time,

yet its simple and compact design makes it easy to use on the tightest jobsite.

TEN BAGGERLarge Capacity. High Production.

TEN BAGGER ACCESSORIES


FOOTPRINT 8 ft 2 in x 11 ft (2.4 m x 3.4 m)

WEIGHT EMPTY 3,210 lb (1,456 kg)

WEIGHT FULL Up To 30,000 lb (1,3607.7 kg)


With the SPEC MIX system, every raw material is factory preblended, packaged in heavy-duty bulk bags and dispensed into the Ten Bagger silo on site. There is no sand to shovel or pallets of bags to lift, break and discard.

Transporting Video

Loading Video

Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

SWIVEL GATE & EXTENDED HANDLE

https://www.specmix.com/ten-bagger/https://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.specmix.com/wp-content/uploads/2021/01/TenBagger-.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/2018-Gravity-Silo-Safety-Manual_low_res.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdf

SPLIT SILO

7

SPLIT SILO ACCESSORIES



WEIGHT EMPTY 2,900 lb (1,315.4 kg)

WEIGHT FULL Up to 18,000 lb (8,164.6 kg)


SPLIT SILOMultiple Product Delivery. Maximum Efficiency.

With the SPEC MIX system, every raw material is factory preblended, packaged in heavy-duty bulk bags and dispensed into the Split Silo on site. There is no sand to shovel or pallets of bags to lift, break and discard.

Transporting Video

Loading Video

Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

Transporting Video

Loading Video

Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTERThe SPEC MIX Split Silo system is designed with two compartments to offer the contractor the versatility of multiple product delivery to a single mixer, making the contractor’s equipment more efficient. Its unique, compact design works perfectly on tight jobsites where more than one product is needed. The Split Silo holds up to five bulk bags in each compartment, giving the ability to mix two different products from one silo.

https://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.specmix.com/wp-content/uploads/2021/01/TenBagger-.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/2018-Gravity-Silo-Safety-Manual_low_res.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdfhttps://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.specmix.com/wp-content/uploads/2021/01/SplitSilo.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/2018-Gravity-Silo-Safety-Manual_low_res.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdfhttps://www.specmix.com/split-silo-2/#:~:text=The%20SPEC%20MIX%C2%AE%20Split,than%20one%20product%20is%20needed.

LOAD N GO

8

LOAD N GO ACCESSORIES


FOOTPRINT 6 ft 6 in X 7 ft 1 in (2.4 m x 2.4 m)

WEIGHT EMPTY 1,150 lb (521.6 kg)

WEIGHT FULL 5,200 lb (2358.6 kg)

CAPACITY 1 - 3,000 lb (1,360.7 kg) bulk bag

LOAD N GOJust Load and Go!

Transporting Video

Loading Video

Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

For mortar, colored mortar, grout, stucco, shotcrete, utility products or custom mixes, the SPEC MIX LOAD N GO mixing system is the ideal tool for increasing on-site mortar delivery versatility. Specifically designed as a low-profile, lightweight addition to the SPEC MIX mixing system fleet, the LOAD N GO is ideal for interior work, large residential, small commercial or a multitude of jobsite conditions. Its two-component design allows the contractor to use smaller forklifts with lower lifting height capacities. With the addition of the LOAD N GO ladder kit, the silo operates the same as the standard G7000 with a one-bulk bag capacity.

https://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.specmix.com/wp-content/uploads/2021/02/SPEC-MIX-LOAD-N-GO.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/2018-Gravity-Silo-Safety-Manual_low_res.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdfhttps://www.specmix.com/wp-content/uploads/2021/02/SPEC-MIX-LOAD-N-GO.pdf

POWER AUGER MIXING SYSTEMS

9

The PA1000 & PA4000 Powered, Compact Mixing Systems Go To Work on Any Jobsite

8

Transporting Video

Loading Video

Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

https://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.specmix.com/wp-content/uploads/2021/02/SPEC-MIX-LOAD-N-GO.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/2018-Gravity-Silo-Safety-Manual_low_res.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdf

PA1000 POWER AUGER

10

FOOTPRINT 4 ft 5 in x 5 ft (1.3 m x 1.5 m)


WEIGHT FULL 4,000 lb (1,814.3 kg)

POWER SYSTEMS 13 hp gas motor with electric start.

7 hp electric motor

(220v, 30 amp, single phase)

PA1000Maximum Mobility. Jobsite Versatility.The SPEC MIX PA1000 Power Auger delivery system is the ultimate tool for maximizing a contractor’s efficiency by increasing the mobility and versatility of the material mixing station. This low-profile unit holds one 3,000 lb (1,360.7 kg) bulk bag, and is easily loaded with a large skid steer or even a small single-stage forklift. Its base is the size of a standard pallet and weighs only 1,100 lb (498 kg) when empty.

The PA1000 system is suited for use with any size batch mixer or mixer-pump equipment. The compressed footprint makes it ideal for tight spaces, interior floor-to-floor applications, masonry fence sound walls and any site with limited space for mixing. The PA1000 optimizes productivity by placing the mixing station close to the work zone. Transporting Video

Loading Video

Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

11

PA1000 ACCESSORIES


https://www.specmix.com/pa1000/https://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.youtube.com/watch?v=yhjhfKlut2U&feature=emb_logohttps://www.specmix.com/wp-content/uploads/2019/07/PA1000-2019.pdfhttps://www.specmix.com/wp-content/uploads/2021/02/PA1000_4000-Operations-and-Safety-Manual.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdf

10

SUPPORT CENTER

PA4000 POWER AUGER

11

PA4000Low-Profile. High Output. The SPEC MIX PA4000 Power Auger delivery system is engineered for dispensing all SPEC MIX dry, preblended products. This material delivery system is built to tackle interior and exterior masonry projects of all sizes. Contractor crews of any size will maximize their efficiency, productivity and safety with the PA4000 system by increasing the mobility and versatility of the material mixing station.

This low-profile compact unit holds up to 4 bulk bags each weighing 3,000 lb (1,360.7 kg). Loading the bulk bags with equipment as a small as a heavy duty skid steer or small single-stage forklift is safely and easily done from near ground level. With a footprint measuring 6 ft 1 in x 7 ft 9 in (1.9 m x 2.4 m) and weighing only 2,000 lb (907 kg) empty, the PA4000 is ideal for projects using masonry mortar, grout, stucco, shotcrete and any other preblended cementitious product from SPEC MIX, especially interior and exterior jobs with low height and weight restrictions. With optional gas or electric power, the PA4000 mixes and dispenses material quickly, consistently and safely with just the push of a button—every time!



WEIGHT FULL 14,000 lb (6,350.2 kg)

POWER SYSTEMS 13 hp gas motor with electric start.

7 hp electric motor

(220v, 30 amp, single phase)

Transporting Video

Loading Video

Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

PA4000 ACCESSORIES


https://www.specmix.com/pa4000/https://youtu.be/uwcvbtGRjHchttps://youtu.be/uwcvbtGRjHchttps://www.youtube.com/watch?v=-DKrraK2eT4&feature=emb_logohttps://www.specmix.com/wp-content/uploads/2021/01/PA4000.pdfhttps://www.specmix.com/wp-content/uploads/2021/02/PA1000_4000-Operations-and-Safety-Manual.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdf

CONTINUOUS MIXING SYSTEMS

9

Achieve Higher Productivity with Less Labor, Dust and Noise on the Most Challenging Jobsites

12

D2W CONTINUOUS MIXING SYSTEM

13

D2W CONTINUOUS MIXERContinuous Output.Constant Quality.The SPEC MIX D2W Continous Mixer is the ultimate SPEC MIX silo material mixing system that provides contractors the flexibility and control they need for staging and managing their product needs.

It functions like a miniature on-site batch plant that reduces labor and clean up, eliminates material waste, produces highly consistent product, and above all maximizes the productivity of any size crew. From masonry mortars, grouts, stucco and shotcrete formulas, the SPEC MIX D2W system is a contractor’s ideal solution for higher production and profitability.

Specifically designed to attach to a SPEC MIX G7000 or Ten Bagger silo, this continuous power mixing auger system utilizes a unique array of specialized mixing paddles and agitators. It folds and sheers any preblended cementitious product to efficiently hydrate the dried aggregate and mechanically work natural air into the material for maximum workability, open time and boardlife.

The patented mixing chamber, shaft and paddles resist cement sticking to them and the preset wash-out cycle allows the SPEC MIX D2W to self-clean in 2 minutes; there is no need to disassemble the mixer. There is no sand to shovel; bags to lift and risk of back injury and certainly no trash or dust at the mixer. If the project requires colored mortar, dry-pack deck mud, coarse grout or concrete repair products, the SPEC MIX D2W will produce the product quickly and consistently—all day, every day and it’s all done with the flip of a switch. With SPEC MIX you work smarter not harder!

D2W Electric Operation Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

https://www.specmix.com/d2w/https://youtu.be/zHEXAN7ycz8https://www.specmix.com/wp-content/uploads/2021/01/D2W.pdfhttps://www.specmix.com/wp-content/uploads/2021/02/SPEC-MIX-D2W-Gas-Powered-Combined-Operations-and-Safety-Manual.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdf

D2W GAS POWERED HYDRAULIC DRIVE CONTINUOUS MIXING SYSTEM

14

D2W Gas Powered Hydraulic Drive Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

The SPEC MIX® D2W Continuous Mixing System with Gas Powered Hydraulic Drive is the portable batch plant giving contractors the ability to mix large amounts of materials anywhere without needing any utilities—no electricity or pressurized water line is needed! Simply connect the D2W’s hose to its pump and a 200 gallon tank of clean water, start the gas powered hydraulic drive and the D2W Continuous Mixing System is capable of producing up to 10 cubic yards of material per hour. Once the water ratio is set the D2W continuously produces highly consistent, workable product with optimal open-time.

Having your own on-site, on-demand mixing system greatly decreases labor and eliminates material waste while maximizing the efficiency, productivity and profitability of any size crew. The D2W Continuous Mixing System & Gas Powered Hydraulic Drive unit gives you control over when, where and how fast the job is completed!

D2W GAS POWERED HYDRAULIC DRIVE

Ideal for large projectsOutput - up to 1 pallet / hour (over 1 yd / hour)Mixes materials w/ 3/8 inor smaller aggregate

Provides Dust-Free operationEasy installationSimple connection to astandard wet/dry shop vacuum(6 gallon/6hp motor required)

Set and adjust water flowValve and regulator eliminates the need to measure water

Easy to use on/off toggle switch Tool-free clamp for ease of assembly and disassemblyEasy, quick cleanout and low maintenance

Ergonomic design for safety & mobilityRobust construction for jobsite terrainLarge, solid, maintenance free wheels Detaches from mixer for easy transport

Plug into standard 120V wall outlet No electrician or rewiring needed

WATER FLOW VALVE

LOW POWER REQUIREMENTS

DURABLE-DETACHABLE CART

SIMPLE CONTROLS & OPERATION

3

OPTIONAL DUST COVERLARGE CAPACITY HOPPER WITH BAG BREAKER

Weighs only 210 lbs (95 kg)Easy to set up, easy to move

COMPACT & PORTABLE

CONTINUOUS MIXING SYSTEM

https://youtu.be/2SV1_ajsJGMhttps://youtu.be/2SV1_ajsJGMhttps://www.specmix.com/wp-content/uploads/2021/01/D2W-GAS-POWERED-HYDRAULIC-DRIVE.pdfhttps://www.specmix.com/wp-content/uploads/2021/02/SPEC-MIX-D2W-Gas-Powered-Combined-Operations-and-Safety-Manual.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdfhttps://www.specmix.com/d2w-gas-powered/

D2W GAS POWERED HYDRAULIC DRIVE CONTINUOUS MIXING SYSTEM

SUPPORT CENTER

D2W WORKHORSE CONTINUOUS MIXING SYSTEM

The SPEC MIX D2W Workhorse continuous mixing system and Dust Collection accessory is powered by a standard 120V circuit so you can mix SPEC MIX products anywhere on site. Once plugged into power, connect the Workhorse to a steady water source then flip on the switch and start breaking bags of SPEC MIX products.

Ideal for large projectsOutput - up to 1 pallet / hour (over 1 yd / hour)Mixes materials w/ 3/8 inor smaller aggregate

Provides Dust-Free operationEasy installationSimple connection to astandard wet/dry shop vacuum(6 gallon/6hp motor required)

Set and adjust water flowValve and regulator eliminates the need to measure water

Easy to use on/off toggle switch Tool-free clamp for ease of assembly and disassemblyEasy, quick cleanout and low maintenance

Ergonomic design for safety & mobilityRobust construction for jobsite terrainLarge, solid, maintenance free wheels Detaches from mixer for easy transport

Plug into standard 120V wall outlet No electrician or rewiring needed

WATER FLOW VALVE

LOW POWER REQUIREMENTS

DURABLE-DETACHABLE CART

SIMPLE CONTROLS & OPERATION

3

OPTIONAL DUST COVERLARGE CAPACITY HOPPER WITH BAG BREAKER

Weighs only 210 lbs (95 kg)Easy to set up, easy to move

COMPACT & PORTABLE

Mix Dust-Free...Continuously! D2W WORKHORSE

15

D2W Workhorse Video

Tech Data Sheet


Material Use Guide

SUPPORT CENTER

https://www.specmix.com/d2w-workhorse/https://youtu.be/AQ2b8jQ9LyMhttps://www.specmix.com/wp-content/uploads/2021/01/D2W-Workhorse.pdfhttps://www.specmix.com/wp-content/uploads/2021/02/D2W-Workhorse-Operations-Safety-Manual_SM.pdfhttps://www.specmix.com/wp-content/uploads/2019/04/SPEC-MIX%C2%AE_Material-Handling-Guide.pdf

MIXING SYSTEM ACCESSORIES FOR DUST CONTROL

The Correct Mixing System Accessories Contribute to a Safe and Productive Work Environment

16

The Correct Mixing System Accessories Contribute to a Safe and Productive Work Environment

16

MIXING SYSTEM ENGINEERING CONTROLS FOR REDUCING DUST

16

Upper ShroudSPEC MIX developed Engineering Controls designed to increase jobsite productivity and worker safety. Providing a safe work environment starts with our systems’ ergonomically correct design and reducing exposure to respirable “nuisance” dust. The SPEC MIX Upper Shroud effectively mitigates a worker’s potential interaction with dust when charging silos. When utilized properly its unique design and construction allows for easy on-site set up and use.

A Safe Work Environment Starts with Mixing Systems that Reduce Respirable Dust on the Jobsite.

G7000, TEN BAGGER, SPLIT SILO, LOAD N GO,PA1000, PA4000

AVAILABLE FOR THESE MIXING SYSTEMS:

G7000, TEN BAGGER, LOAD N GO, PA1000, PA4000

17

Mixer ShroudThe SPEC MIX Mixer Shroud is a durable poly-coated hood that attaches to the silo cone and covers the batch mixer to control mixing dust emissions. The Mixer Shroud has 3 settings to adjust the height of the shroud above the batch mixer giving easy access to view the interior of the mixer.


The D2W Workhorse can be equipped with a vacuum system dust collection cover that eliminates most all mixing dust emissions. The cover is easy to install and connects to a standard wet/dry shop vacuum with a 6 gallon/6 HP motor. Once the vacuum is connected, just turn on the switch and start dispensing bags into the Workhorse hopper for dust-free mixing.

MIXING SYSTEMS ACCESSORIES FOR DUST CONTROL MITIGATION

18

D2W WORKHORSE Dust Cover

D2W WORKHORSE

AVAILABLE FOR THIS MIXING SYSTEM:

The key to mitigating a worker’s exposure to dust at the mixing station is to ensure the operator is positioned in a dust-free area. The SPEC MIX® Swivel Gate and Extended Handle, when used in tandem, allow the laborer to stay clear of mixing dust by giving them a 360° radius to operate and dispense material. In addition, the Extended Handle is specially configured to further distance a worker from the mixing dust. Both the SPEC MIX G7000 & TEN BAGGER Systems are uniquely adapted for these accessories that ensure worker protection and safety.


G7000, TEN BAGGER

Gravity System Swivel Gate & Extended Handle

SPEC MIX PREBLENDED CONSTRUCTION MATERIALS

SPEC MIX is the leading producer of cementitious building materials that provide project designers with endless aesthetic options, engineers with proven structural integrity, and craftsmen with exceptional performance. SPEC MIX product formulations are designed and tested to rise far beyond the properties of competitive products. And when it comes to jobsite productivity, efficiency and safety, we’re the team that provides contractors with mixing system solutions and materials for maximizing manpower and profitability. With SPEC MIX everbody wins!

MASONRY MORTARS

ADHERED VENEER MORTARS

MASONRY GROUTS

PAVING MORTARS

CONSTRUCTION PRODUCTS

STUCCO BASE COATS

© 2021 SPEC MIX

SPEC MIX PRODUCTS ARE PRODUCED BY ITS MANUFACTURING FACILITIES THROUGHOUT THE U.S. AND CANADA. EACH MANUFACTURER ADHERES TO A STRICT QUALITY ASSURANCE PROGRAM TO ENSURE COMPLETE QUALITY CONTROL IN EVERY BATCH.

VISIT WWW.SPECMIX.COM1230 EAGAN INDUSTRIAL RD, STE 160, EAGAN, MN 55121

CONTACT YOUR LOCAL SPEC MIX REPRESENTATIVE

G7000, TEN BAGGER
https://www.specmix.com/paving-mortars/https://www.specmix.com/stucco/https://www.specmix.com/construction-products/https://www.specmix.com/construction-products/https://www.specmix.com/masonry-mortars/https://www.specmix.com/masonry-grouts/https://www.specmix.com/adhered-veneer-mortars/http://specmix.comhttps://www.specmix.com/contact-rep/

MIXING SYSTEMS SELECTION GUIDE · 2021. 2. 4. · SPEC MIX is the Innovator of Material Mixing...

Documents

Transcript of MIXING SYSTEMS SELECTION GUIDE · 2021. 2. 4. · SPEC MIX is the Innovator of Material Mixing...