Effiect o Grip Sie and Grip Strength on Pistol Marsmanship ...
Mitee-Grip - ProgerProger Spantechniek BV - Hillegom - telefoon (0252) 524544 - E-mail:...
Transcript of Mitee-Grip - ProgerProger Spantechniek BV - Hillegom - telefoon (0252) 524544 - E-mail:...
Proger Spantechniek BV - Hillegom - telefoon (0252) 524544 - E-mail: [email protected] - www.proger.nl 10-17
21
Mitee-Grip™
how to hold a Workpiece When You can’t Use a clamp
Mitee-Grip™ is a heat activated wax based compound embedded in precision paper, coated on nylon mesh or in a stick form. This holding media maintains parallelism on precision parts. It is very useful for thin parts, micro machining, optical and quartz components, and jewelry related items. Approximate holding force 40 PSI.
Part No. Desc. Size (Metric)
10240 Paper Roll 12”x5’ (305x1524)10245 Paper Roll 12”x25’ (305x7620)10250 Mesh Roll 10”x5’ (254x1524)10252 Mesh Roll 10”x25’ (254x7620)10230 Compound 1 Stick10235 Compound 3 Sticks
1Place the Mitee-Grip™ sheet on the subplate leaving a 1/4" (6mm)
border on all sides, or melt stick on warm subplate
4 Use air or water to cool, being careful to prevent water from going
between subplate and workpiece while hot.
2 In some cases the part should be lightly clamped to prevent
movement. NOTE: Over thin workpieces use a top plate for even pressure.
5 Part is ready, use coolant while machining. Reheat to remove. We
have found an ultrasonic cleaner is best to remove wax residue or simply wipe part while warm using alcohol based cleaner.
3 225°F (107°C) is application temperature and fully liquid, 186°F
(85°C) is solid and becoming liquid. Some customers use an oven and record time and temp once determined by experimentation. A hot plate may also be used at higher temps if monitored. Most parts will “float” when the Mitee-Grip™ has liquefied.
The mesh product captures additional wax material in the web and aides in
holding irregular shape parts. Typically additional holding force can
be attained with this material.
The original paper product is excellent for holding smooth flat parts
and maintaining parallelism.
The stick form material can be used in shallow cavities for holding concave and convex pieces. It will also stabilize
delicate parts during machining.
MB 2017 CATALOG - FINAL.indd 23 10/19/2017 11:38:58 AM
Scan QR code to see more
application images
51
Dennis Van Kessel - CNC Solution
Savi Beeson - Instagram Dillan King - Instagram
Proto-Cut CNC Machining - Instagram
Shawn Armstrong - Instagram
Autosports Engineering - Instagram
Travis Robert - Instagram
MB 2017 CATALOG - FINAL.indd 53 10/19/2017 11:40:28 AM