MIS 2014
-
Upload
tai-nguyen -
Category
Business
-
view
537 -
download
0
Transcript of MIS 2014
Internal HexagonProduct Catalog, 2014
Internal Hexagon Product C
atalog, 2014
MC-CIH06 REV.11
To learn more about M ISvisi t our website :
www.mis-implants.comor scan the QR Code
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.
MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Qua l i t y Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
MIS offers technicians a range of innovative
tools that ease and simplify lab work, and
help reach higher accuracy in every case.
© MIS Corporation. All Rights Reserved.
MIS Implants Technologies Ltd. is a dynamic, rapidly growing,
research, production and marketing company, specialized in
the development and manufacturing of advanced solutions for
dental implantology. The MIS mission is to simplify dental
implantology, by offering creative solutions, for a better quality of life.
Implants System
SEVEN 8 - 15M4 16-23Implant Insertion Tools 24UNO 25-28LINK 29Packaging 30Implant Label Colors 31
Surgical Instruments Pilot Drills - External Irrigation - SEVEN 34Twist Drills - External Irrigation- SEVEN 35Pilot Drills - External Irrigation - M4 36Twist Drills - External Irrigation- M4 37Short Twist Drills - External Irrigation SEVEN & M4 Procedure 38-39Twist Drills - Internal Irrigation SEVEN & M4 Procedure 40-41Marking Drills & Countersinks 42Trephine Burs 43Ceramic Drills - External Irrigation 43Surgical Tools - UNO 44Surgical Tools 45-46Prosthetic hex. driver 47Surgical Instruments 48Torque Ratchet Kit 49
KitsSEVEN Advanced Surgical Kit 52-53M4 Advanced Surgical Kit 54-55M4 Drilling Set 56Yeung Bone Harvest Kit 57SEVEN Standard Platform Stoppers Kit 58SEVEN Drill Stoppers Kits - Depth-Based 59Abrahami Drill Guide Kit 60-61Bone Compression Kit 62-63UNO Implant Surgical Kit 64-65Prosthetic Tools Kit 66-67Sinus Lift Osteotomes Set 68Convex Osteotomes Set 69MIS Manuals Kits 70-71
Accessories Narrow PlatformAnalog and Impression Copings 73NPK - Narrow Prosthetic Kits 74-75Direct, Screw Retained Restoration Options 76Cemented Restoration Options 77Ti Base Kit - Single Tooth Restoration 78Ti Base Kit - Multi Unit Restoration 79OT Equator KIts 80-81Zirconia Abutment Kits 82-83Ball Attachment System 84Locator Attachment System 85-86
Standard PlatformAnalogs and Impression Coping 87CPK - Complete Prosthetic Kit 88-89Direct, Screw Retained Restoration Options 90Cemented Restoration Options 91Direct, Cemented Restoration Options 92-93
4.
Table of Contents
Implant Systems6-31
Surgical Instruments32-49
Kits 50-71
Prosthetic Options72-130
Ti Base Kit - Single Tooth Restoration 94Ti Base Kit - Multi-Unit Restoration 95OT Equator Kits 96-97Zirconia Abutment Kits 98-101Multi-Unit System 102-103Multi-Unit Angulated 104Ball Attachments 105Angulated Ball Attachments 106-107Locator Attachment System 108-109
Wide PlatformAnalog and Impression Copings 110-111 CPK - Complete Prosthetic Kit 112-113Direct, Screw Retained Restoration Options 114Cemented Restoration Options 115Direct, Cemented Restoration Options 116-117Ti Base Kit - Single Tooth Restoration 118Ti Base Kit - Multi-Unit Restoration 119OT Equator Kits 120-121Zirconia Abutment Kits 122-123Multi-Unit System 124-125Ball Attachment System 126-127Locator Attachment System 128-129
Bars - Reconstruction System 130
Prosthetic Instruments 132-134Zircon Diamond Burr Set 135Prosthetic Planning Kit 136-137MCU Control Unit 138-139Crown Set 140Abutment Holding System Kit 141Prosthetic Introduction Case 142-143MGUIDE Surgical Kit 144-149
4BONE® XBM - Bovine Bone Matrix 1524BONE® BCH - Synthetic Bone Substitute 153BONDBONE® - Bonding Graft Material 154RCB-Resorbable Conforming Barrier Membrane 155RSB-Resorbable Collagen Barrier Membrane 156RCM - Resorbable Collagen Membrane 1574BONE® TAPE - Wound Dressings 1584BONE® PLUG - Wound Dressings 159
Alloy Compositions 162Restorative Components 163Diameter and Platform Color Coding 164Label Description 165MIS Manuals - Symbol Index 166-167
Index 169-188
Accessories131-149
Bone Augmentation Materials 150-159
Appendix160-167
Index168-188
6.
MIS proudly offers a wide range of implant systems, providing simple
solutions for all clinical scenarios, from the basic to the most complex.
Each and every implant design is based on long history of research and
development. All implants are made of biocompatible, medical grade,
Titanium Alloy. The surface of all MIS implants is roughened by both sand
blasting and acid-etching, promoting long lasting osseointegration. MIS
adheres to the most stringent international quality standards, complying
with ISO 13485: 2003 Quality Management System for Medical Devices.
Products that appear in this catalog are CE approved and FDA cleared
for marketing.
Implant Systems.
MIS SEVEN self-tapping implants are designed for a wide range of bone types and bone augmentation procedures. Their unique geometric design features dual threads, three spiral channels stemming from the apex, micro-rings on the implant neck and a large pitch thread design. Following our commitment to Make It Simple, MIS was the first company to include a sterile, single-use final drill with each and every SEVEN implant, to ensure a safer and more accurate drilling procedure.
MIS M4 implants combine a cylindrical and conical body shape with V-shaped threads. It is designed for either two-stage or single-stage surgical procedures. The cylindrical shape provides excellent primary stability. The self-tapping thread design, three spiral channels and flat cutting apex, make M4 implants the ideal choice for use in dense bone.
UNO One Piece implants are mainly indicated for the restoration of narrow ridges and tight spaces, where augmentation is either contraindicated or not feasible. Specific indications may include single or multiple missing teeth in the anterior mandibular area and restoration of maxillary lateral incisors. Thanks to their advanced double-thread geometry and recognized surface technology, UNO implants allow for a quick and effortless placement and long lasting osseointegration.
13mm 16mm11.50mm8mm6mm 10mmLength
Ø3.30mm
MF7-10330
MF7-11330
MF7-13330
MF7-16330
Type
8.
(For more information please refer to page no. 45-46)Surgical tools
Available for heights: 2,3,4,6,8mm
Implant cover screw & healing caps
Narrow PlatformScrew type implants range
NARROW®
MT-SRA10 Square connection to ratchet adapter
MT-HLI10 Long insertion tool, int. hex. connection
MT-HSI10 Short insertion tool, int. hex. connection
MT-SHA10
MT-NRH20
Hand wrench square connection
Hex. ratchet long adapter for int. hex. connection, NP
MC1-00330
MH-52330MH-53330MH-54330MH-55330MH-56330
2/3/4/5/6
Ø 4.3mm
MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330
2/3/4/6/8mm
Ø 4mm
Catalog No. DimensionsCatalog No. Dimensions
Ø 2.40
Ø 3.30
2.10
Ø 2.20
Ø 3.20
L
SEVEN internal hex. implant
Ø3.30mmNarrow Platform
®
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF7-10330Ø3.30mmlength 10mm
MF7-11330Ø3.30mmlength 11.50mm
MF7-13330Ø3.30mmlength 13mm
MF7-16330Ø3.30mmlength 16mm
Final DrillA specially designed final drill for 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing a for an easier and safer drilling procedure.
NARROW
1200-1500
Ø2.40 Ø3.30Ø1.90
900-1200
15-25
Ø2.20 Ø3.20
200-400
Ø2.40
Ø3.30mm Implant Procedure
Drilling Speed (RPM)
Diameter
For bone type 1&2
Final drill
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the final drill for bone types 3&4
13mm 16mm11.50mm8mm6mm 10mmLength
Ø 3.75mm
MF7-08375
MF7-10375
MF7-11375
MF7-13375
MF7-16375
Ø 4.20mm
MF7-06420
MF7-08420
MF7-10420
MF7-11420
MF7-13420
MF7-16420
Type
Standard PlatformScrew type implants range
Available for heights: 3,4,5,6mm
Implant cover screw & healing caps
STANDARD
10.
®
(For more information please refer to page no. 45-46)
Surgical tools
Square connection to ratchet adapter
MT-SRA10
Hand wrench square connection
MT-SHA10
Long insertion tool, int. hex. connection
MT-HLI10
Short insertion tool, int. hex. connection
MT-HSI10
MC1-00375
MH-53375MH-54375MH-55375MH-56375
MH-03375MH-04375MH-05375MH-06375
3/4/5/6mm
Ø 4mm
3/4/5/6mm
Ø 5.5mm
Ø 3.10
Ø 3.75
2.45
Ø 2.80
Ø 3.60
L
SEVEN internal hex. implant
Ø3.75mmStandard Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF7-08375Ø3.75mmlength 8mm
MF7-10375Ø3.75mmlength 10mm
MF7-11375Ø3.75mmlength 11.50mm
MF7-13375Ø3.75mmlength 13mm
MF7-16375Ø3.75mmlength 16mm
Final DrillA specially designed final drill for 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
STANDARD®
Catalog No. Dimensions
Implant Procedure
Drilling Speed (RPM)
Diameter
For bone type 1&2
Final drill
OR
1200-1500
900-1200
Ø1.90 Ø2.80 Ø3.75Ø2.40 Ø2.40
500-700 15-25
Ø2.80 Ø3.60
Ø3.75
200-400
200-500
Ø2.80
Ø3.75mm
For bone type 3&4
CountersinkMT-GDN33
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the final drill for bone type 3&4
Catalog No. Dimensions
Ø3.30
Ø4.10
Ø 3.70
Ø 3.75
2.45
0.4mm
Ø 4.20
L
SEVEN internal hex. implant
Ø4.20mmStandard Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF7-06420Ø4.20mmlength 6mm
MF7-08420Ø4.20mmlength 8mm
MF7-10420Ø4.20mmlength 10mm
MF7-11420Ø4.20mmlength 11.50mm
MF7-13420Ø4.20mmlength 13mm
MF7-16420Ø4.20mmlength 16mm
Final DrillA specially designed final drill for 6, 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
Ø5mm
MF7-06500
MF7-08500
MF7-10500
MF7-11500
MF7-13500
MF7-16500
Ø6mm
MF7-06600
MF7-08600
MF7-10600
MF7-11600
MF7-13600
12.
STANDARD®
Implant Procedure
Drilling Speed (RPM)
Diameter
For bone type 1&2
Final drill
OR
1200-1500
900-1200
Ø2.40 Ø2.80Ø1.90 Ø2.40
500-700
Ø3.20 Ø3.20
400-700
Ø3.30Ø4.10
Ø3.30Ø4.20
200-400
200-500
Ø4.20
15-25
Ø4.20mm
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the final drill for bone types 3&4
For bone type 3&4
CountersinkMT-GDN33
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
13mm 16mm11.50mm8mm6mm 10mmLength
Available for heights: 3,4,5mm
Implant cover screw & healing caps
Wide PlatformScrew type implants range
Ø5mm
MF7-06500
MF7-08500
MF7-10500
MF7-11500
MF7-13500
MF7-16500
Ø6mm
MF7-06600
MF7-08600
MF7-10600
MF7-11600
MF7-13600
Type
WIDE®
(For more information please refer to page no. 45-46)
Surgical tools
Square connection to ratchet adapter
MT-SRA10
Hand wrench square connection
MT-SHA10
Long insertion tool, int. hex. connection
MT-HLI10
Short insertion tool, int. hex. connection
MT-HSI10
MH-W3500MH-W4500MH-W5500
MH-W3630MH-W4630MH-W5630
MC1-00470
3/4/5mm
Ø 6.5mm
3/4/5mm
Ø 5mm
Catalog No. Dimensions
Ø 4.50
Ø 4.50
0.4mm
Ø 4.10
Ø 4.90
2.45
Ø 5
L
SEVEN internal hex. implant
Ø5mmWide Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF7-06500Ø5mmlength 6mm
MF7-08500Ø5mmlength 8mm
MF7-10500Ø5mmlength 10mm
MF7-11500Ø5mmlength 11.50mm
MF7-13500Ø5mmlength 13mm
MF7-16500Ø5mmlength 16mm
Final DrillA specially designed final drill for 6, 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
14.
WIDE®
Drilling Speed (RPM)
Diameter
Implant Procedure
For bone type 1&2
Final drill
OR
Ø4.10 Ø 4.90
Ø5
200-400
200-500
Ø5
15-25
Ø4
300-500
1200-1500
900-1200
Ø2.40 Ø2.80 Ø3.20Ø2.40Ø1.90
500-700
400-700
Ø5mm
Ø4
The drilling sequence is demonstrated with a 13mm implant.
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the final drill for bone types 3&4
For bone type 3&4
CountersinkMT-GDN50
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
DimensionsCatalog No.
Ø 5.10
Ø 4.50
Ø 5.50
Ø 6
0.4mm
Ø 5.90
2.45
L
SEVEN internal hex. implant
Ø6mmWide Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF7-06600Ø6mmlength 6mm
MF7-08600Ø6mmlength 8mm
MF7-10600Ø6mmlength 10mm
MF7-11600Ø6mmlength 11.50mm
MF7-13600Ø6mmlength 13mm
MF7-06600Ø6mmlength 6mm
MF7-08600Ø6mmlength 8mm
MF7-10600Ø6mmlength 10mm
MF7-11600Ø6mmlength 11.50mm
MF7-13600Ø6mmlength 13mm
Final DrillA specially designed final drill for 6, 8, 10, 11.50 and 13mm implants is supplied with every implant, allowing for an easier and safer drilling procedure.
WIDE®
Drilling Speed (RPM)
Diameter
Implant Procedure
Ø5.10 Ø 5.90
Ø6
200-400
200-500
Ø6
15-25
Ø4
300-500
300-500
300-500
1200-1500
900-1200
Ø2.40 Ø2.80 Ø3.20Ø2.40Ø1.90
500-700
400-700
Ø6mm
Ø4.50 Ø5 Ø5
For bone type 1&2
Final drill
OR
For bone type 3&4
CountersinkMT-GDN50
MH-52330MH-53330MH-54330MH-55330MH-56330
2/3/4/5/6
Ø 4.3mm
13mm 16mm11.50mm8mm6mm 10mmLength
Ø3.30mm
MF4-10330
MF4-11330
MF4-13330
MF4-16330
Type
16.
(For more information please refer to page no. 45-46)Surgical tools
Available for heights: 2,3,4,6,8mm
Implant cover screw & healing caps
Narrow PlatformScrew type implants range
NARROW
MT-SRA10 Square connection to ratchet adapter
MT-HLI10 Long insertion tool, int. hex. connection
MT-HSI10 Short insertion tool, int. hex. connection
MT-SHA10
MT-NRH20
Hand wrench square connection
Hex. ratchet long adapter for int. hex. connection, NP
MH-N2330MH-N3330MH-N4330MH-N6330MH-N8330
2/3/4/6/8mm
Ø 4mm
MC1-00330
Catalog No. Dimensions
Ø3.30
Ø 2.65
L
2.10
M4 internal hex. implant
Ø3.30mmNarrow Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF4-10330Ø3.30mmlength 10mm
MF4-11330Ø3.30mmlength 11.50mm
MF4-13330Ø3.30mmlength 13mm
MF4-16330Ø3.30mmlength 16mm
1200-1500
900-1200
Ø1.90 Ø2.4 Ø2.80
500-700
200-500
Ø3.30mm
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Implant Procedure
Drilling Speed (RPM)
Diameter Ø3.30
15-25
NARROW
For bone type 3&4
CountersinkMT-CSN33For bone
type 1&2
OR
Ø3.00Ø3.30
13mm 16mm11.50mm8mm6mm 10mmLength
Ø 3.75mm
MF4-08375
MF4-10375
MF4-11375
MF4-13375
MF4-16375
Ø 4.20mm
MF4-06420
MF4-08420
MF4-10420
MF4-11420
MF4-13420
MF4-16420
MC1-00375
MH-03375MH-04375MH-05375MH-06375
3/4/5/6mm
Ø 4mm
MH-53375MH-54375MH-55375MH-56375
3/4/5/6mm
Ø 5.5mm
Type
Standard PlatformScrew type implants range
Available for heights: 3,4,5,6mm
Implant cover screw & healing caps
STANDARD
18.
(For more information please refer to page no. 45-46)
Surgical tools
Square connection to ratchet adapter
MT-SRA10
Hand wrench square connection
MT-SHA10
Long insertion tool, int. hex. connection
MT-HLI10
Short insertion tool, int. hex. connection
MT-HSI10
MC1-00375
MC1-00375MC1-00375
MH-03375MH-04375MH-05375MH-06375
3/4/5/6mm
Ø 4mm
MH-53375MH-54375MH-55375MH-56375
3/4/5/6mm
Ø 5.5mm
Catalog No. Dimensions
2.45
Ø 3.75
Ø 3
L
M4 internal hex. implant
Ø3.75mmStandard Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF4-06375Ø3.75mmlength 6mm
MF4-08375Ø3.75mmlength 8mm
MF4-10375Ø3.75mmlength 10mm
MF4-11375Ø3.75mmlength 11.50mm
MF4-13375Ø3.75mmlength 13mm
MF4-16375Ø3.75mmlength 16mm
STANDARD
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.4
500-700
400-700 15-25
Ø3.20 Ø3.75
Ø3.75mm Implant Procedure
Drilling Speed (RPM)
Diameter
200-500
Ø3.20Ø3.75
For bone type 3&4
CountersinkMT-GDN33For bone
type 1&2
OR
Ø5mm
MF4-06500
MF4-08500
MF4-10500
MF4-11500
MF4-13500
MF4-16500
Ø6mm
MF4-06600
MF4-08600
MF4-10600
MF4-11600
MF4-13600
Catalog No. Dimensions
2.45
0.4mmØ 3.75
Ø 4.20
Ø 3.65
L
M4 internal hex. implant
Ø4.20mmStandard Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF4-06420Ø4.20mmlength 6mm
MF4-08420Ø4.20mmlength 8mm
MF4-10420Ø4.20mmlength 10mm
MF4-11420Ø4.20mmlength 11.50mm
MF4-13420Ø4.20mmlength 13mm
MF4-16420Ø4.20mmlength 16mm
STANDARD
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.4
500-700
400-700
400-600 15-25
Ø3.20 Ø3.80 Ø4.20
Ø4.20mm Implant Procedure
Drilling Speed (RPM)
Diameter
200-500
Ø3.20Ø4.20
For bone type 3&4
CountersinkMT-GDN33For bone
type 1&2
OR
20.
13mm 16mm11.50mm8mm6mm 10mmLength
Available for heights: 3,4,5mm
Implant cover screw & healing caps
Screw type implants range
Ø5mm
MF4-06500
MF4-08500
MF4-10500
MF4-11500
MF4-13500
MF4-16500
Ø6mm
MF4-06600
MF4-08600
MF4-10600
MF4-11600
MF4-13600
Type
Wide Platform
WIDE
MC1-00470
MH-W3500MH-W4500MH-W5500
3/4/5mm
Ø 5mm
MH-W3630MH-W4630MH-W5630
3/4/5mm
Ø 6.5mm
(For more information please refer to page no. 45-46)
Surgical tools
Square connection to ratchet adapter
MT-SRA10
Hand wrench square connection
MT-SHA10
Long insertion tool, int. hex. connection
MT-HLI10
Short insertion tool, int. hex. connection
MT-HSI10
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
Catalog No. Dimensions
0.4mmØ4.50
Ø5
Ø4.35
L
2.45
M4 internal hex. implant
Ø5mmWide Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF4-06500Ø5mmlength 6mm
MF4-08500Ø5mmlength 8mm
MF4-10500Ø5mmlength 10mm
MF4-11500Ø5mmlength 11.50mm
MF4-13500Ø5mmlength 13mm
MF4-16500Ø5mmlength 16mm
WIDE
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.4
500-700
400-700
400-600
400-600 15-25
Ø3.20 Ø3.80 Ø4.50 Ø5
Ø5mm Implant Procedure
Drilling Speed (RPM)
Diameter
200-500
Ø4.50Ø5.00
For bone type 3&4
CountersinkMT-GDN50For bone
type 1&2
OR
22.
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
Catalog No. Dimensions
0.4mm
Ø 5.35
L
2.45
Ø4.50
Ø6
M4 internal hex. implant
Ø6mmWide Platform
Titanium Alloy Ti 6Al 4V ELISand Blasted and Acid-Etched
MF4-06600Ø6mmlength 6mm
MF4-08600Ø6mmlength 8mm
MF4-10600Ø6mmlength 10mm
MF4-11600Ø6mmlength 11.50mm
MF4-13600Ø6mmlength 13mm
WIDE
1200-1500
900-1200
Ø1.90 Ø2.80Ø2.4
500-700
400-700
400-600
400-600
Ø3.20 Ø3.80 Ø4.50
15-25
Ø6
Ø6mm Implant Procedure
Drilling Speed (RPM)
Diameter
300-500
300-500
200-500
Ø5.50Ø5 Ø4.50Ø6.00
For bone type 3&4
CountersinkMT-GDN50For bone
type 1&2
OR
24.
Implant insertion tools are designed to facilitate quick and reliable implant placement procedures. The unique "3 in 1" key system, minimizes the number of tools required and maximizes flexibility.
Implant Insertion Tools
1
2
3
Insertion tool for hand key adapter
Insertion tool for motor
Insertion tool for ratchet adapter
1
3
2
The improved insertion tool allows the delivery of a cover screw or a healing cap onto the implant after insertion.
Please note: In order to assure efficient operation, keys should be fully inserted into the implants. Complete insertion of the key optimizes the transfer of force during implant placement and enables simple release of the key from the hex. at the end of the procedure.
Key will not hold the implant properly unless it is completely securely inserted into the hex.
24.
Implant insertion tools
Hand wrench square connection
Long insertion tool, int. hex. connectionMT-HLI10
Short insertion tool, int. hex. connectionMT-HSI10
Square connection to ratchet adapterMT-SRA10
MT-SHA10
Ø 3mm
Ø 3.50mm
16mm11.50mm10mm 13mmLength
Type
MO1-10300
MO1-10350
MO1-11300
MO1-11350
MO1-16300
MO1-16350
MO1-13300
MO1-13350
One PieceScrew type implants range
UNO One Piece implant long key
UNO One Piece implant insertion tool
MT-HKS15
MT-HKL21
MT-HKO21
UNO One Piece implant short key
Surgical Tools
DimensionsCatalog No.
Ø2.7mm
6.3mm
3
L
UNO One Piece Implant
Ø3mmOne Piece
Titanium Alloy Ti 6Al 4V ELIThread section is Sand Blasted and Acid-Etched
MO1-10300Ø3mmlength 10mm
MO1-11300Ø3mmlength 11.50mm
MO1-13300Ø3mmlength 13mm
MO1-16300Ø3mmlength 16mm
26.
Implant Procedure Ø3mm
Ø2.4
700-900
Ø2.40Ø2
Drilling Speed (RPM)
Diameter
15-25
Ø3
900-1200
Ø2
1200-1500
Ø1.90
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Catalog No. Dimensions
Ø
2.7mm
6.3mm
3.50
L
Ø3.50mmOne Piece
UNO One Piece Implant
Titanium Alloy Ti 6Al 4V ELIThread section is Sand Blasted and Acid-Etched
MO1-10350Ø3.50mmlength 10mm
MO1-11350Ø3.50mmlength 11.50mm
MO1-13350Ø3.50mmlength 13mm
MO1-16350Ø3.50mmlength 16mm
Implant Procedure Ø3.50mm
Drilling Speed (RPM)
Diameter Ø3
900-1200
Ø2 Ø2
700-900
Ø2.40
500-700
Ø3
15-25
Ø3.50
1200-1500
Ø1.90
Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
UNO restorative components include an analog and a multi-purpose plastic cap, that may be used as an accurate impression coping, a temporary healing cap or as a base for a temporary restoration.
UNO One Piece implant analog
UNO One Piece implant comfort plastic cap
MO1-RSA10
MM-OUP01
UNO One Piece Restorative Components
The impression coping combines the benefits of closed and open tray impression techniques, resulting in accurate working models and perfectly fitting restorations.
Impression coping.
The impression coping can be used as a base for a temporary restoration by cutting off the upper section and roughening the surface. The use of non-eugenol temporary cement is recommended.
Temporary restoration.
By cutting off the upper section, the plastic cap becomes a healing cap.
Healing cap.
28.
Link Tools
Ortho anchor pilot drill 1mmMT-TDO01
Link tools are specially engineered to allow simple, smooth and quick insertion or removal of Link orthodontic anchor screws. Insertion or removal may be safely and effectively accomplished by hand.
2.5
2.75
Ø 1.60mm
Orthodontic Anchor Screw
Screw type range
12mm8mm6mm 10mmLength
Type
MG2-06160 MG2-08160 MG2-12160MG2-10160
Titanium Alloy Ti 6Al 4V ELI
Orthodontic Anchor Screw
MT-LCD20 Long cross driver for orthodontic screws
MT-MSD20 Surgical adapter driver
MT-SCD20 Short cross driver for orthodontic screws
Quick identification markings signify: implant diameter (top), implant length (middle) and implant platform (bottom).
The innovative MIS packaging system is designed for simple and easy use. All of our implant boxes feature distinctive colors, large typeface, clear data labels and a pull tab for quick opening. Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.
Packaging
30.
Pull tab
Convenient pull tab facilitates easy, quick opening of the box during surgery.
Implant identification markingsBoxes are a uni form s h a p e an d h e i gh t , specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage.
Implant Label Colors
Light Gray Ø3 UNO One Piece
Gray Ø3.50 UNO One Piece
Red Ø3.75 Standard (SEVEN, M4)
Blue Ø4.20 Standard (SEVEN, M4)
White Ø6 Wide (SEVEN, M4)
Green Ø5 Wide (SEVEN, M4)
Yellow Ø3.30 Narrow (SEVEN, M4)
32.32.
MIS offers a full range of surgical kits and instruments,
aiming to simplify surgical procedures to the benefit
of both patients and clinicians.
Surgical Instruments.
34.
Pilot Drills - External Irrigation
1 MT-TDN20
1.5:1 MT-TDN20Pilot drill 2mm external irrigation
1
Dimensions: Length - Length 37.3Diameter - 2mm
Material: Stainless steel
MT-P2406Pilot drill with built-in stopper dia. 2.40 height 6mm
2
Dimensions: Length - 31.8mm Diameter - 2.40mm
Material: Stainless steel
MT-P2408Pilot drill with built-in stopper dia. 2.40 height 8mm
3
Dimensions: Length - 31.8mmDiameter - 2.40mm
Material: Stainless steel
MT-P2410Pilot drill with built-in stopper dia. 2.40 height 10mm
4
Dimensions: Length - 31.8mmDiameter - 2.40mm
Material: Stainless steel
MT-P2411Pilot drill with built-in stopper dia. 2.40 height 11.5mm
5
Dimensions: Length - 31.8mmDiameter - 2.40mm
Material: Stainless steel
MT-P2413Pilot drill with built-in stopper dia. 2.40 height 13mm
6
Dimensions: Length - 31.8mmDiameter - 2.40mm
Material: Stainless steel
6 MT-P2413
1:1
7 MT-P2416
1:1
5 MT-P2411
1:1
1:1
4 MT-P2410
3 MT-P2408
1:1
2 MT-P2406
1:1MT-P2416Pilot drill with built-in stopper dia. 2.40 height 16mm
7
Dimensions: Length - 31.8mmDiameter - 2.40mm
Material: Stainless steel
6mm
Dep
th
8mm
Dep
th
10m
m D
epth
11.5
mm
Dep
th
13m
m D
epth
16m
m D
epth
Pilot Drills External Irrigation
Twist Drills - External Irrigation
1 MT-TDT28
1:1
2 MT-TDT32
1:1
MT-TDT28Twist drill 2.8mm external irrigation
1
Dimensions: Length - 37.5mmDiameter - 2.80mm
Material: Stainless steel
MT-TDT32Twist drill 3.2mm external irrigation
2
Dimensions: Length - 37.5mm Diameter - 3.20mm
Material: Stainless steel
MT-TDT40Twist drill 4mm external irrigation
3
Dimensions: Length - 37.5mmDiameter - 4mm
Material: Stainless steel
MT-TDT45Twist drill 4.5mm external irrigation
4
Dimensions: Length - 38.2mmDiameter - 4.50mm
Material: Stainless steel
MT-TDT50Twist drill 5mm external irrigation
5
Dimensions: Length - 38.2mmDiameter - 5mm
Material: Stainless steel
4
5
MT-TDT45
MT-TDT50
3 MT-TDT40
1:1
1:1
SEVEN
1:1
36.
Twist Drills - External Irrigation
1:1
MT-TDN28Twist drill 2.80mm external irrigation
1
Dimensions: Length - 37.5mm Diameter - 2.8mm
Material: Stainless steel
MT-TDN32Twist drill 3.20mm external irrigation
2
Dimensions: Length - 37.6mmDiameter - 3.2mm
Material: Stainless steel
MT-TDN38Twist drill 3.80mm external irrigation
3
Dimensions: Length - 37.8mmDiameter - 3.8mm
Material: Stainless steel
1 MT-TDN28
2 MT-TDN32
1:1
3 MT-TDN38
6mm
Dep
th
8mm
Dep
th
10m
m D
epth
11.5
mm
Dep
th
16m
m D
epth
Twist Drills External Irrigation
M4
1:1
13m
m D
epth
Twist Drills - External Irrigation
MT-TDN45Twist drill 4.50mm external irrigation
1
Dimensions: Length - 38.2mmDiameter - 4.5mm
Material: Stainless steel
MT-TDN50Twist drill 5mm external irrigation
2
Dimensions: Length - 38.2mm Diameter - 5mm
Material: Stainless steel
MT-TDN55Twist drill 5.50mm external irrigation
3
Dimensions: Length - 38.2mmDiameter - 5.5mm
Material: Stainless steel
3 MT-TDN55
1:11:1
2 MT-TDN50
1:1
1 MT-TDN45
M4
38.
2 MT-TDI32
1:1
1 MT-TDI28
1:1
3 MT-TDI38
1:1
MT-TDI28Twist short drill 2.80mm
1
Dimensions: Length - 30mmDiameter - 2.80mm
Material: Stainless steel
MT-TDI38Twist short drill 3.80mm
3
Dimensions: Length - 30mmDiameter - 3.80mm
Material: Stainless steel
MT-TDI32Twist short drill 3.20mm
2
Dimensions: Length - 30mmDiameter - 3.20mm
Material: Stainless steel
Short Twist Drills - External Irrigation SEVEN & M4 Procedure
8mm
Dep
th
6mm
Dep
th
10m
m D
epth
11.5
mm
Dep
th
Twist Drills External Irrigation
3 MT-TDI50
1:1
1 MT-TDI40
1:1
2 MT-TDI45
1:1
MT-TDI40Twist short drill 4mm
1
Dimensions: Length - 30mmDiameter - 4.0mm
Material: Stainless steel
MT-TDI45Twist short drill 4.5mm
2
Dimensions: Length - 30mmDiameter - 4.50mm
Material: Stainless steel
MT-TDI50Twist short drill 5mm
4
Dimensions: Length - 30mmDiameter - 5.0mm
Material: Stainless steel
MT-TDI55Twist short drill 5.5mm
5
Dimensions: Length - 30mmDiameter - 5.50mm
Material: Stainless steel
Short Twist Drills - External Irrigation SEVEN & M4 Procedure
4 MT-TDI55
1:1
40.
1:1MT-TD280Twist drill 2.80mm internal irrigation
1
Dimensions: Length - 37.5mmDiameter - 2.8mm
Material: Stainless steel
MT-TD320Twist drill 3.20mm internal irrigation
2
Dimensions: Length - 37.6mm Diameter - 3.2mm
Material: Stainless steel
MT-TD380Twist drill 3.80mm internal irrigation
3
Dimensions: Length - 37.8mmDiameter - 3.8mm
Material: Stainless steel
1:1
1 MT-TD280
2 MT-TD320
3 MT-TD380
6mm
Dep
th
8mm
Dep
th
10m
m D
epth
11.5
mm
Dep
th
13m
m D
epth
16m
m D
epth
Twist Drills Internal Irrigation
Twist Drills - Internal Irrigation SEVEN & M4 Procedure
1:1
MT-TD400Twist drill 4.0mm internal irrigation
1
Dimensions: Length - 37.8mmDiameter - 4.0mm
Material: Stainless steel
MT-TD450Twist drill 4.50mm internal irrigation
2
Dimensions: Length - 38.2mm Diameter - 4.50mm
Material: Stainless steel
MT-TD500Twist drill 5.0mm internal irrigation
3
Dimensions: Length - 38.2mmDiameter - 5.0mm
Material: Stainless steel
2 MT-TD450
1:11:1
4 MT-TD550
1 MT-TD400
Twist Drills - Internal Irrigation SEVEN & M4 Procedure
3 MT-TD500
1:1
MT-TD550Twist drill 5.50mm internal irrigation
4
Dimensions: Length - 38.2mmDiameter - 5.5mm
Material: Stainless steel
1:1
42.
Marking Drills & Countersinks
1 MT-TDN19
1:1
2 MT-TD110
1:1
3 MT-SMD10
1:1
4 MT-CSN33
1:1
5 MT-GDN33
1:1
MT-TDN19Marking drill 1.90mm external irrigation
1
Dimensions: Length - 34mmDiameter - 1.90mm
Material: Stainless steel
MT-TD110Marking drill 1.90mm internal irrigation
2
Dimensions: Length - 34mmDiameter - 1.90mm
Material: Stainless steel
MT-SMD10Spade marking drill
3
Dimensions: Length - 27.5mmMaterial: Stainless steel
MT-CSN33Countersink for Narrow platform
4
Dimensions: Length - 31mmØ3.30mm
Material: Stainless steel
MT-GDN50Countersink for Wide platform
6 MT-GDN50
1:1
MT-GDN50Countersink for Wide platform
6
Dimensions: Length - 26.8mmØ5mm / Ø6mm
Material: Stainless steel
MT-GDN33Countersink for Standard platform
5
Dimensions: Length - 26mmØ3.75mm/ Ø4.20mm
Material: Stainless steel
Trephine Burs
1 MT-00400
1:1
2 MT-00500
1:1
3 MT-00600
1:1
MT-00600Trephine bur 6mm
4
Dimensions: Length - 37mmInner Ø6mm Outer Ø7mm
Material:
Ceramic Drills - External Irrigation
1 MT-CRD21
1:1
2 MT-CRD20
1:1
3 MT-CRD28
1:1
MT-CRD21Ceramic marking drill dia. 2.10mm
1
Dimensions: Length - 28.5mmDiameter - 2.10mm
Material: Ceramic
MT-CRD20Ceramic pilot drill dia. 2mm
2
Dimensions: Length - 33.5mmDiameter - 2mm
Material: Ceramic
MT-CRD28Ceramic twist drill dia. 2.80mm
3
Dimensions: Length - 35mmDiameter - 2.80mm
Material: Ceramic
Ceramic Drill features include: reduced vibration, smooth operation, and continuous substance removal. MIS Ceramic Drills are made of a high performance mix of Zirconia (Zirconium oxide) and Alumina (Aluminum oxide) ceramics. Advantages: Free of metal ,biocompatible, corrosion free, wear resistant (usage between 50 to 100 drills), above average bending strength compared with other ceramic drills, requires approx. half the torque of steel drills.
MT-00400Trephine bur 4mm
1
Dimensions: Length - 37mmInner Ø4mm Outer Ø5mm
Material: Stainless steel
MT-00500Trephine bur 5mm
2
Dimensions: Length - 37mmInner Ø5mm Outer Ø6mm
Material: Stainless steel
3
Stainless steel
MT-UML21UNO One Piece implant motor adapter, long
5
Dimensions: Length - 30mmMaterial: Stainless steel
MT-UMS21UNO One Piece implant motor adapter, short
4
Dimensions: Length - 22mmMaterial: Stainless steel
Surgical Tools - UNO
1 MT-HKS15
1:1
2 MT-HKL21
1:1
3 MT-HKO21
1:1
MT-HKS15UNO One Piece implant short key
1
Dimensions: Length - 12mmMaterial: Stainless steel
MT-HKL21UNO One Piece implant long key
2
Dimensions: Length - 17mmMaterial: Stainless steel
MT-HKO21UNO One Piece implant insertion tool
3
Dimensions: Length - 18.8mmMaterial: Stainless steel
MT-HKO21UNO One Piece implant
insertion tool
5 MT-UML21
1:1
4 MT-UMS21
1:1
44.
Surgical Tools
1 MT-PP001
1:1
2 MT-HW001
1.5:1
3 MT-HSI10
1:1
4 MT-HLI10
1:1
5 MT-DE001
1:1
6 MT-SRA10
1:1
MT-PP001Parallel pin
1
Dimensions: Length - 24mmØ2mm / Ø3.20mm
Material: Stainless steel
MT-HW001Hand wrench
2
Dimensions: Length - 13mmMaterial: Stainless steel
MT-DE001Drill extender
5
Dimensions: Length - 28.85mmMaterial: Stainless steel
MT-HSI10Short insertion tool, int. hex. connection
3
Dimensions: Length - 24.4mmMaterial: Stainless steel
MT-HLI10Long insertion tool, int. hex. connection
4
Dimensions: Length - 28.2mmMaterial: Stainless steel
MT-MRH10Hex. ratchet short adapter for int. hex. connection
9
Dimensions: Length - 19mmMaterial: Stainless steel
MT-MRH20Hex. ratchet long adapter for int. hex. connection
10
Dimensions: Length - 25mmMaterial: Stainless steel
MT-SRA10Square connection to ratchet adapter
6
Dimensions: Length - 15.50mm Material: Stainless steel
MT-SHA10Hand wrench square connection
8
Dimensions: Length - 15.6mmMaterial: Stainless steel
MT-NRH20Hex. ratchet long adapter for int. hex. connection, NP
7
Dimensions: Length - 25mmMaterial: Stainless steel
8
9
10
MT-SHA10
MT-MRH10
MT-MRH20
1:1
1:1
1:1
7 MT-NRH20
1:1
MT-SHA10Hand wrench, square
connection
Surgical Tools
1 MT-HDS30
1:1
2 MT-HDL30
1:1
MT-HDS30Short hex. drive 0.05"
1
Dimensions: Length - 16mmMaterial: Stainless steel
MT-HDL30Long hex. drive 0.05"
2
Dimensions: Length - 22mmMaterial: Stainless steel
MT-SM005Short motor adapter for 0.05" hex.
3
Dimensions: Length - 24mmMaterial: Stainless steel
MT-LM005Long motor adapter for 0.05" hex.
4
Dimensions: Length - 30mmMaterial: Stainless steel
46.
MT-DI001Implant direction indicator
6
Dimensions: Length - 17mmMaterial: Stainless steel
MT-HMR05Short direct hand and ratchet hex. key
7
Dimensions: Length - 20.5mmMaterial: Stainless steel
1:1
3 MT-SM005
4 MT-LM005
1:1
5 MT-TP500
1:2
MT-TP500Tissue punch
5
Dimensions: Length - 28mmInner - Ø4.5mm
Material: Stainless steel
6 MT-DI001
1:1
7 MT-HMR05
1:1
8 MT-HMR10
1:1
MT-HMR10Long direct hand and ratchet hex. key
8
Dimensions: Length - 25mmMaterial: Stainless steel
1
2
3
Prosthetic hex. driver for hand key adapter
Prosthetic hex. driver for ratchet adapter
Prosthetic hex. driver for motor
Prosthetic hex. driver
1
3
2
Surgical Instruments
1 MT-MSD20
1:4
2 MT-RI030
1:2
3 MT-RI040
1:2
MT-MSD20Surgical adapter driver
1
Dimensions: Length - 140mmMaterial:
MT-RI030Ratchet wrench
2
Dimensions: Length - 75mmMaterial: Stainless steel
MT-RI040Torque wrench
3
Dimensions: Length - 108mmMaterial: Stainless steel
Stainless steel + Aluminum
MT-BTI10Implant site depth probe 6/8/10/11.5/13/16mm
5
Dimensions: Length - 100mmØ1.80mm / Ø2.70mm
Material: Stainless steel
MT-MAL10Mallet with solid plastic insert
4
Material: Stainless steel
5 MT-BTI10
1:3
4 MT-MAL10
1:5
6 MT-TP420
1:1
MT-TP420Tissue punch dia. 4.20mm
6
Dimensions: Length - 29.50mmInner - Ø4.2mm
Material: Stainless steel
48.
MT-RI040Torque wrench
Lubricant tube
Wide torque range 15 - 70 Ncm
Adjustment key
Ratchet mode option
Torque Ratchet Kit
MT-RI050
The new premium Torque Wrench fits all MIS insertion tools and adapters. It is designed for convenient grip, accurate torque transfer and simple assembly and disassembly; to facilitate effortless cleaning and maintenance.
50.50.
MIS has dedicated years of collaboration with clinicians in order to develop
our state-of-the-art surgical kits. Engineered with the aim of streamlining
surgical procedures, MIS kits are designed to simplify standard procedures
and provide creative solutions for all your clinical needs.
Kits.
52.52.
SEVEN Advanced Surgical Kit
The innovative SEVEN Surgical Kit contains all the required tools for SEVEN implant placement procedures. The kit is designed to enhance simplicity and safety; featuring a novel ergonomic design that follows the surgical drilling sequence for a more efficient procedure. A set of length-based pilot drills include color coded visual indicators for both implant diameters and restorative platforms.
SEVEN Advanced Surgical Kit
Advanced Surgical Kit for the SEVEN implant system with external irrigation drills
MK-EI48
Kit Contents
Surgical kit for the SEVEN implant system with external irrigation drills MK-EI48
MT-SMD10Spade marking drill
1
MT-TDN19Marking drill 1.90mm external irrigation
1
Pcs:
Kit content:
Pcs:
MT-TDT28Twist drill 2.8mm external irrigation
1
MT-TDT32Twist drill 3.2mm external irrigation
1
MT-TDT40Twist drill 4mm external irrigation
1
MT-TDT45Twist drill 4.5mm external irrigation
1
MT-TDT50 Twist drill 5mm external irrigation
1
MT-BTT24Body try-in 2.4mm
1
MT-BTT28Body try-in 2.8mm
1
MT-BTT32Body try-in 3.20mm
1
MT-BTT40Body try-in 4mm
1
Pcs:
MT-BTT45Body try-in 4.50mm
1
MT-BTT50Body try-in 5mm
1
MT-GDN33Countersink for standard platform
1
MT-GDN50Countersink for wide platform
1
MT-NRH20Hex. ratchet long adapter for int. hex. connection, NP
1
MT-PP240Parallel pin dia. 2.40/3mm for tapered impl. procedure
1
MT-DI001Implant direction indicator
1
MT-SRA10Square connection to ratchet adapter
1
MT-SM005Short motor adapter for 0.05" hex.
1
MT-LM005Long motor adapter for 0.05" hex.
1
Pcs:
MT-HMR10Long direct hand and ratchet hex. key
1
MT-SHA10Hand wrench square connection
1
MT-DE001Drill extender
1
MT-RI030Ratchet wrench
1
MT-HLI10Long insertion tool, int. hex. connection
1
MT-HSI10Short insertion tool, int. hex. connection
1
MT-P2406Pilot drill with built-in stopper dia. 2.40 height 6mm
1
MT-P2408Pilot drill with built-in stopper dia. 2.40 height 8mm
1
1
MT-P2411Pilot drill with built-in stopper dia. 2.40 height 11.5mm
1
MT-P2413Pilot drill with built-in stopper dia. 2.40 height 13mm
1
MT-P2416Pilot drill with built-in stopper dia. 2.40 height 16mm
MT-P2410Pilot drill with built-in stopper dia. 2.40 height 10mm
1
Hex. ratchet long adapter for int. hex. connection
MT-MRH20
1
54.
MIS M4 implants combine the benefits of cylindrical and conical implant designs, with the aim of achieving excellent primary stability for every clinical scenario. Two main features of M4 implants include the self-tapping, V-shaped thread design with three spiral channels – allowing for smooth insertion even in type 1 bone conditions, and a flat, cutting, tapered apex – enabling instantaneous grip into bone for immediate placement procedures.
M4 Advanced Surgical Kit
M4 Advanced Surgical KitMK-0016
Kit Contents
M4 Advanced Surgical Kit MK-0016
MT-SMD10Spade marking drill
1
MT-TDN19Marking drill 1.90mm external irrigation
1
MT-P2416Pilot drill with built-in stopper dia. 2.40 height 16mm
1
Pcs: Pcs:
MT-MRH25Hex. ratchet long adapter for int. hex. connection
1
MT-SHA10Hand wrench square connection
1
MT-RI030Ratchet wrench
1
Kit Contents:
MT-SM005Short motor adapter for 0.05" hex.
1
MT-GDN50Countersink for wide platform
1
MT-LM005Long motor adapter for 0.05" hex.
1
MT-DE001Drill extender
1
MT-CSN33Countersink for narrow platform
1
MT-SRA10Square connection to ratchet adapter
1
MT-GDN33Countersink for standard platform
1
Pcs:
MT-TDN28Twist drill 2.8mm external irrigation
1
MT-TDN32Twist drill 3.2mm external irrigation
1
MT-TDN38Twist drill 3.8mm external irrigation
1
MT-TDN45Twist drill 4.5mm external irrigation
1
MT-TDN50Twist drill 5mm external irrigation
1
MT-TDN55Twist drill 5.5mm external irrigation
1
MT-HLI10Long insertion tool, int. hex. connection
1
MT-HSI10Short insertion tool, int. hex. connection
1
MT-PP240Parallel pin dia. 2.40/3mm for tapered impl. procedure
1
M4 Drilling Set
MK-0014
In order to Make It Simple, the innovative M4 implants Drilling Set was designed as an add-on to the SEVEN Surgical Kit. When the two sets are combined, the doctor has a full range of drills and tools necessary to complete both M4 and SEVEN implant placement procedures.
M4 Drilling SetMK-0014
MT-CSN33Countersink for narrow platform
MT-GDN33Countersink for standard platform
MT-GDN50Countersink for wide platform
Kit Contents:
56.
MT-TDN28Twist drill 2.8mm external irrigation
MT-TDN38Twist drill 3.8mm external irrigation
MT-TDN32Twist drill 3.2mm external irrigation
MT-TDN45Twist drill 4.5mm external irrigation
MT-TDN50Twist drill 5mm external irrigation
MT-TDN55Twist drill 5.5mm external irrigation
Yeung Bone Harvest Kit
MK-BH26
The Bone Harvest Kit enables, simple and easy bone harvesting during surgery. It provides a revolutionary dual-action bone harvesting system while drilling; the harvested bone can be used elsewhere as needed. the drills can also be used as final drills.
DrillColor-coded drill matches sleeve color.
Simple.The bone accumulates inside the drill slots during drilling.
Easy.The Bone Harvest drills can be used as final drills while harvesting bone.
Safe. The Bone Harvest Kit can be used with MIS drill stoppers, to assure a safe drilling procedure.
Kit ContentsThe Bone Harvest Kit includes:
Ø2.80mm
Ø3.20mm
Ø3.80mm
Ø4.50mm
MT-BC280
MT-BC320
MT-BC380
MT-BC450
Drill with a slight continuous pressure. While removing the drill, continue rotation to keep the bone inside the drill slots. Drills should not be used more than 30 times.
Recommended speed is between 20-50 RPM without irrigation.
58.
Following the use of MIS length-based pilot drills, the SEVEN Standard Platform Stoppers Kit ensures drilling to the exact desired depth. The kit includes the most commonly used lengths: 8, 10, 11.5 and 13mm.
Simple.Quick, easy assembly
Kit Contents Ø2.80 stoppers(for Ø3.75mm implants)
Ø3.20 stoppers(for Ø4.20mm implants)
SEVEN Standard Platform Stoppers Kit
58.
MK-BS001
StoppersFour sleeves for each diameter in 8, 10, 11.5 and 13mm lengths, color-coded according to drills
BoxTray can be removed from the box for ease of use
Scale
Teflon OUT Insert
Teflon IN Insert
Easy.Color-coding for quick identification of the sleeve diameter
Safe. Safe drilling to desired depth
Clear. Clearly arranged depth sleeves for 8 to13mm for two diameters: Ø2.8 and Ø3.2mm
Following the use of the MIS length-based pilot drills, the SEVEN Drill Stoppers Length Kits enable safe and easy drilling to the exact desired depth. 5 different Stoppers Kits are available in lengths: 6, 8, 10, 11.5 and 13mm.
Simple.Quick, easy assembly
For 6mm implantsMK-SDS06
For 8mm implantsMK-SDS08
For 10mm implantsMK-SDS10
For 11.5mm implantsMK-SDS11
For 13mm implantsMK-SDS13
Kit Contents
SEVEN Drill Stoppers Kits - Depth-Based
MK-SDS**
8mm
Scale
Box
Stoppers
Tray can be removed from the box for ease of use
Five sleeves 2.8, 3.2, 4, 4.5 and 5mm diameters, color-coded according to drills
Desired drilling depth
10mm11.5mm
13mm
Teflon OUT Insert
Teflon IN Insert
Easy.Color-coding for a quick identification of sleeve diameter
Safe. Safe drilling to desired depth
Clear. Clearly arranged depth sleeves for Ø2.8mm to Ø5mm diameter drills
The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to accurately locate and drill the osteotomies of two or more consecutive implants with optimal spacing, angulation and parallelism. In standard cases, the Abrahami Kit may be used as a simple alternative to a surgical guide. Although designed as a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool.
Abrahami Drill Guide Kit
MK-0011
60.
MK-0011Abrahami Drill Guide Kit
Simple and logical
Stabilization
Ideal distance measurement from adjacent teeth
Variable distance options
Screw
Spring
Ball
Location pin
Optimal parallelism
Before cleaning, the Location Pins must be separated as follows: screws, springs, balls and pins. Cleaning and drying the parts is essential in order to avoid erosion of the parts and to maintain efficient functioning of the system.
Location Pins Ø2mm
Location Pins Ø2.80mm
Extension Arms
Paralleling Pin 20mm
Short 10mm
Short 10mm
6, 7, 8mm
9, 10, 11mm
Long 16mm
Long 16mm
12, 13, 14mm
The MIS Bone Compression Kit is designed to enhance primary stability and increase immediate bone-to-implant contact in mainly type 3 and type 4 bone conditions.
kit is not designed for ridge widening.
Bone Compression Kit
MK-0020
MK-0020Bone Compression Kit
62.
Kit Contents
Bone Compression Kit MK-0020
MT-SMD10Spade marking drill
1
Pcs:Pcs: Pcs:
Kit Contents:
MT-HSI10Short insertion tool, int. hex. connection
1
MT-HLI10Long insertion tool, int. hex. connection
1
MT-SHA10Hand wrench square connection
1
MT-SRA10Square connection to ratchet adapter
1
MT-RI030Ratchet wrench
1
1
MO-CO160Convex compression screw Ø1.80-Ø2.90mm
MO-CO200Convex compression screw Ø2.30-Ø3.30mm
1
MO-CO240Convex compression screw Ø2.70-Ø3.70mm
1
MO-CO280Convex compression screw Ø3.1-Ø4.50mm
1
MO-SO300Convex compression screw Ø3mm
1
MO-SO350Convex compression screw Ø3.50mm
1
MO-SO400Convex compression screw Ø4mm
1
UNO One Piece implants are placed using specially designed tools that fit the implant prosthetic part. The kit includes surgical drills, placement keys and a ratchet wrench.
MK-0036UNO Implant Surgical Kit
UNO Implant Surgical Kit
64.
Kit Contents
UNO Implant Surgical Kit MK-0036
MT-SMD10Spade marking drill
1
Pcs:Pcs: Pcs:
Kit Contents:
MT-TDN20Pilot drill 2mm external irrigation
1
MT-P2416Pilot drill with built-in stopper dia. 2.40 height 16mm
1
MT-TDT30Twist drill 3mm external irrigation
1
MT-BTT24Body try-in 2.4mm
1
MT-BTT20Body try-in 2.0mm
1
MT-BTT30Body try-in 3.0mm
1
MT-UML21UNO One Piece implant motor adapter, long
1
MT-PP001Parallel pin
1
MT-HKL21UNO One Piece implant long key
1
MT-HKO21UNO One Piece implant insertion tool
1
MT-RI030Ratchet wrench
1
MK-0039Prosthetic Tools Kit
MK-0039
The MIS Prosthetic Tools Kit consists of tools required for standard restorative procedures. The kit includes a torque wrench, a locator placing tool and MIS hex. drivers and implant indicators. In addition, the kit includes an abutment holder system forimproved handling and easier abutment adjustments.
Prosthetic Tools Kit
66.
Kit Contents:
Kit Contents
Pcs:Pcs:
MM-LSD21Locator torque wrench driver long
1
MM-LSD15Locator torque wrench driver short
1
MM-LCT10Locator core tool
1
MT-BK235Ball attachment anchor key
1
MT-MUK02Multi-Unit key
1
MT-HHR07Short hand screwdriver for 0.05" hex.
1
MT-HHR13Long hand screwdriver for 0.05" hex.
1
MT-HDS30Short hex. drive 0.05"
1
MT-HDL30Long hex. drive 0.05"
1
MT-DI001implant direction Indicator
4
MT-SMK13Short motor key adapter 0.05"
1
MT-LMK13Long motor key adapter 0.05"
1
MT-MSD20Surgical adapter driver
1
MT-RI040Torque wrench
1
Pcs:
MT-US002Standard Int. hex. Implant analog for universal hand driver
1
MT-UW002Wide int. hex. Implant analog for universal hand driver
1
MT-IE172Internal connection abutment extractor
1
Pcs:
1
MT-IT100Closed tray impression coping key
MK-0023
The MIS Sinus Lift Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet concave tools. All tools are laser marked for depths of 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.
Sinus Lift Osteotomes Set
6mm
11mm
15mm
Concave
MK-0023Sinus Lift Osteotomes Set
68.
The MIS Convex Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet convex tools. All tools are laser marked for depths of 6, 11 and 15mm, and are equipped with stoppers for convenience and safety.
MK-0024
Convex Osteotomes Set
MK-0024Convex Osteotomes Set
6mm
11mm
15mm
Convex
Bone Compression Kit UNO Surgical Kit
M4 MGUIDE Surgical Kit
SEVEN 13
9
910
7
8
5
5
6
6
5 4
4
14 7
Zircon Diamond Burr Set TI-BASE Kits6CPK
Abrahami Drill Guide Kit Prosthetic Kit
MIS offers a comprehensive line of kits for every clinical scenario and matched to every MIS implant system and procedure. The kits are expertly designed to enhance convenience, safety and simplicity.
70.
SURGERYKITS
2
PROSTHETICKITS
PROSTHETICCOMPONENT
MIS Manual
Kits
Drills Keys Accessories
Yeung Bone Harvest Kit Stoppers Kit Osteotomes Set
MGUIDE Tools Kit
8
84
3
3
5
5
OT Equator Kits Zirconia Prosthetic Abutments
Prosthetic Planning Kit Abutment Holding System Kit
25 10
24
72.
Prosthetic Options.
MIS superstructures are designed to meet all prosthetic needs and fit all accepted working methods. Abutments
are available in a wide range of heights, gingival collar heights, angles and margin types. MIS offers solutions
for both screw retained and cement retained restorations. The MIS temporary plastic abutments are made of
PEEK (polyetheretherketone), a synthetic biocompatible polymer, characterized by high mechanical strength
and inert chemical properties. PEEK abutments allow for sustainable temporary restorations that last up
to 6 months. In an effort to continuously develop our range of superstructures, MIS offers new Titanium
Base abutments, compatible with most CAD/CAM systems software. The new abutments meet the specific
requirements of all MIS Internal hex. implant systems. Allowing for a large variety of prosthetic options,
the Titanium Base abutments are available for all platform sizes, ensuring superior strength, reliability and
aesthetic implant supported restorations.
72.
Analog and Impression Copings
1 MN-RSM10
1.5:1
2 MN-IT100
1.5:1
3 MN-GP100
1.5:1
5 MN-IT300
1.5:1
6 MN-I0330
1.5:1
7 MN-G0160
1.5:1
MN-RSM10Implant analog internal hex. NP
1
Dimensions: Length - 12mmMaterial: Stainless steel
MN-IT100Direct impression coping for closed tray NP
2
Dimensions: Height - 9mmMaterial: Stainless steel
MN-GP100Direct impression coping guide pin Internal hex. NP
3
Dimensions: Length - 16.5mmMaterial: Titanium
MN-PF330Direct press fit for closed tray NP
4
Dimensions: Length - 11mmMaterial: Titanium
MN-IT300Direct impression coping Set for closed tray NP
5
Dimensions: Height - 7.8mmMaterial: Titanium
MN-I0330Direct impression coping for open tray Internal hex. NP
6
Dimensions: Height - 11mmMaterial: Stainless steel
MN-G0160Direct impression coping guide pin internal hex.
7
Dimensions: Length - 21mmMaterial: Titanium
NARROW
MN-IT300Direct impression coping set
for closed tray, NP
4 MN-PF330
1.5:1
5
1 MN-CPK61
2 MN-RSM60
3 MN-CHC60
4 MN-IC600
5 MN-IC040
6 MN-ICH40
NPK - Narrow Prosthetic Kits
MK-NPK61
MK-NPK611mm Narrow prosthetic kit, crown height 6mm, NP
MN-CPK61Anatomic 1mm transgingival abutment, crown height 6mm, NP
1
MN-RSM60Abutment analog crown height 6mm, NP
2
MN-CHC60Plastic healing cap crown height 6mm, NP
3
MN-IC600Direct Impression coping plastic cap, NP
4
MN-IC040Burnout plastic cap, NP
5
MN-ICH40Burnout anti-rotation plastic cap, NP
6
74.
NARROW
NPK - Narrow Prosthetic Kits
NARROW
H
C
C=6mmH=1,2,3,4mm
C=4mmH=1,2,3,4mm
Transgingival Abutment, NP
MN-CPK41*MN-CPK42*MN-CPK43*MN-CPK44*MN-CPK61*MN-CPK62*MN-CPK63*MN-CPK64*
Kit Options:
MK-NPK411mm Narrow prosthetic kit, crown height 4mm, NP
1
MK-NPK422mm Narrow prosthetic kit, crown height 4mm, NP
6
MK-NPK433mm Narrow prosthetic kit, crown height 4mm, NP
6
MK-NPK444mm Narrow prosthetic kit crown height 4mm, NP
6
MK-NPK611mm Narrow prosthetic kit crown height 6mm, NP
6
MK-NPK622mm Narrow prosthetic kit, crown height 6mm, NP
6
MK-NPK633mm Narrow prosthetic kit, crown height 6mm, NP
6
MK-NPK644mm Narrow prosthetic kit, crown height 6mm, NP
6
C=4mm H=1,2,3,4mm
C=Crown Height
H=Gingival Height
C=6mmH=1,2,3,4mm
}}
All CPK abutments can be purchased separately. They are provided with with a burnout anti-rotation plastic cap (MN-ICH40).
76.
Direct, Screw Retained Restoration Options
1 MN-CP013
1.5:1
2 MN-CPH13
1.5:1
MN-CP013Direct plastic cylinder Internal hex. without hex. NP
1
Dimensions: Height - 11mmDiameter - 3.50mm
Material: Burnout plastic
MN-CPH13Direct plastic cylinder internal hex. with hex. NP
2
Dimensions: Height - 11mmDiameter - 3.50mm
Material: Burnout plastic
NARROW
3 MN-TPA12
1.5:1
MN-S0160Direct prosthetic screw internal hex. NP
4
Dimensions: Length - 7.6mm30 Ncm
Material: Titanium
The ”functional height“ of all abutments is measured from the platform connection and does not include the Internal hex. connection.
Please note: PEEK abutments are radiolucent!
4 MN-S0160
1.5:1
5 MN-GP010
1.5:1
6 MN-GPC10
1.5:1
MN-TPA12Narrow profile temporary plastic abutment, NP
3
Dimensions: Height - 11mmDiameter - 3.50mm
Material: Peek
MN-GP010Direct gold plastic cylinder without hex. internal hex. NP
5
Dimensions: Height - 15.5mmDiameter - 4.50mm
Material: Burnout Plastic + gold -a
MN-GPC10Direct gold plastic cylinder with hex. internal hex. SP
6
Dimensions: Height - 15.5mmDiameter - 4.50mm
Material:
Cemented Restoration Options
1 MN-MAC10
1.5:1
2 MN-AN020
1.5:1
3 MN-S0160
1.3:1
MN-MAC10Cementing post, NP
1
Dimensions: Height - 11mmMaterial: Titanium
MN-AN02020 degree angulated abutment Internal hex. NP
2
Dimensions: Height - 8mmMaterial: Titanium
MN-S0160Direct prosthetic screw internal hex. NP
3
Dimensions: Length - 7.6mm30 Ncm
Material: Titanium
NARROW
MN-TPA10Temporary plastic abutment, NP
4
Dimensions: Height - 11mmDiameter - 4mm
Material: Peek
4 MN-TPA10
1.5:1
MN-TPA10Temporary plastic
abutment, NP
Burnout Plastic + gold -a
CAD/CAMTi Base Kit - SingleTooth Restoration
MK-TBN4
For Laboratory Use Only!
5
1 MN-S0160
2 MN-TB001
3 MN-RSM10
MK-TBN4
78.
NARROW
Scanabutment MN-S0160
Direct prosthetic screw internal hex. Narrow platform
MN-SP001Scanning abutment internal hex. connection, Narrow platform
4 GI-SCH11
Ti Base kit h. 4mm for internal hex. connection, NP
Hexagon Connection(with anti-rotation mechanism)
MN-S0160Direct prosthetic screw internal hex. Narrow platform
1
MN-TB001Ti Base internal hex. connection for CAD/CAM, Narrow platform
2
GI-SCH11Burnout anti-rotation plastic cap for Ti Base, Standard platform
4
MN-RSM10Implant analog internal hex. Narrow platform
3
Hex.
Non-Hexagon Connection(without anti-rotational mechanism)
CAD/CAMTi Base Kit -Multi-Unit Restoration
MK-MUN4
For Laboratory Use Only!
Multi Unit Ti Base kit h. 4mm internal hex. connection, NP
NARROW1 MN-S0160
2 MN-TB002
Scanabutment MN-S0160
Direct prosthetic screw internal hex. Narrow platform
MN-SP001Scanning abutment internal hex. connection, Narrow platform
4 GI-SCH11
MK-MUN4
3 MN-RSM10
MN-S0160Direct prosthetic screw internal hex. Narrow platform
1
MN-TB002Multi Unit Ti-Base internal hex. connection, Narrow platform
2
GI-SCH11Burnout anti-rotation plastic cap for Ti-Base, Standard platform
4
MN-RSM10Implant analog internal hex. Narrow platform
3
Non-Hex.
OT Equator kit
80.
OT Equator Kits
80.
NARROW
Ball AttachmentEquator
1.7mm2.6mm
OT Equator laboratory cap (black)
Metal housing
Metal housing
OT Equator cap (0.6kg)
OE-RCY01
OE-RCP01
OE-RCW01
OE-RCV01
Extra soft retention (yellow)
OT Equator cap (1.2kg)Soft retention (pink)
OT Equator cap (1.8kg)Standard retention (white)
OT Equator cap (2.7kg)High retention (violet)
Laboratory Use:
Clinical Use: }MK-NOE1OT Equator internal hex. kit, gingival height 1mm, NP
MK-NOE2OT Equator internal hex. kit, gingival height 2mm, NP
MK-NOE3OT Equator Internal hex. kit, gingival height 3mm, NP
MK-NOE4OT Equator internal hex. kit, gingival height 4mm, NP
H=1,2,3,4,5mm
Kit Options:
MK-NOE5OT Equator internal hex. kit, gingival height 5mm, NP
OT Equator retention caps may be purchased separately.
OT Equator Tools
Ø2.5mm
4mm
1.7mm
Ø2.5mm
5mm
1.7mm
Ø2.5mm
1mm
1.7mm
Ø2.5mm
2mm
1.7mm
Ø2.5mm
3mm
1.7mm
OT Equator Abutments
MT-SRA10Square connection to ratchet adapter
MT-LM005Long motor adapter for 0.05" hex.
MT-SM005Short motor adapter for 0.05" hex.
MT-SHA10Hand wrench square connection
OE-RSM60OT Equator analog
OE-IC002OT Equator impression coping cap
OE-IC001OT Equator tear off impression transfer cap
ET-IT001OT Equator handling tools
82.
MN-S0160Direct prosthetic screw internal hex.
1
MN-IN060Incisor esthetic Ti abutment internal hex., NP
2
Non-Cemented Zircon Prosthetic Abutments
MK-NIZ65
1 MN-S0160
2 MN-IN060
3 MM-SIZW6
Zircon incisor 15º abutment set int. hex., NP
NARROW
MN-S0160Direct prosthetic screw internal hex.
1
MN-CIZ60Incisor TiZi abutment internal hex., NP
2
Pre-Cemented Zircon Prosthetic Abutments
MK-NIC65
1 MN-S0160
2 MN-CIZ60
Zircon cemented incisor 15º abutment set int. hex., NP
NARROW
MM-SIZW6Incisor white Zircon crown, SP / NP
3
Zircon Abutment Kits
NARROW
Zircon abutments cannot be purchased separately. They are provided with direct prosthetic screw internal hex. (MN-S0160).
Zircon cemented incisor 15º abutment set int. hex., NP
Zircon incisor 15º abutment set int. hex., NP
MK-NIC6Zircon cemented incisor 15º abutment set internal hex., NP
Kit Options:
MK-NIZ6Zircon incisor 15º abutment set internal hex., NP}
1mm
8.5mm
2mm
Ball Attachment System
1 MB-N2330
1.5:1
2 MB-N3330
1.5:1
3 MB-N4330
1.5:1
4 MT-NB225
1:1.5
5 MB-RS375
1:1
MB-N2330Ball attachment anchor internal hex. 2mm, NP
1
Dimensions: Height - 2mmMaterial: Titanium
MB-N3330Ball attachment anchor internal hex. 3mm, NP
2
Dimensions: Height - 3mmMaterial: Titanium
MB-N4330Ball attachment anchor Internal hex. 4mm, NP
3
Dimensions: Height - 4mmMaterial: Titanium
MT-NB225Ball attachment anchor key
4
Dimensions: Length - 22mmMaterial: Stainless steel
MB-RS375Ball attachment analog Internal hex.
5
Dimensions: Length - 15.1mmMaterial: Stainless steel
MB-SF200Plastic ball cap
6
Dimensions: Length - 3.5mmMaterial: Plastic
NARROW
16 MB-DB235
1:1
7 MB-GPS10
13 MB-DMH10
1:1
14 MB-PPC10
8 MB-TTP10
12 MT-TSD10
1:2
15 MB-PPR106 MB-SF200
MB-GPS10Gold ball cap
7
Dimensions: Length - 2.4mmMaterial: Gold-e
MB-TTP10Titanium ball cap
8
Dimensions: Length - 3.1mmMaterial: Titanium
MB-DB235Plastic disc for ball attachment
16
Dimensions: Diameter - 15mmMaterial: Plastic
MB-PR010Plastic mounting sleeve
9
Dimensions: Length - 2mmDiameter - 3.8mm
Material: Plastic
MB-DMH10Double metal housing
13
9 MB-PR010
10 MB-TBS10
11 MB-TBS20
MB-PPC10Standard plastic cap for metal housing
14
Dimensions: Length - 2.6mmRetention 1200-1300g
Material: Plastic
MT-TSD10Screw driver for titanium ball cap
12
Dimensions: Length - 60mmMaterial: Stainless steel
MB-TBS10Titanium ball cap spring standard
10
Dimensions: Diameter - 2.5mmMaterial: Steel
MB-TBS20Titanium ball cap spring soft
11
Dimensions: Diameter - 2.6mmMaterial: Steel
MB-PPR10Soft plastic cap for metal housing
15
Dimensions: Length - 2.6mmRetention 800-950g
Material: Plastic
3:1
3:1
3:1
2:1
2:11.5:1
1.5:1
1.5:1
MB-N2330Ball attachment anchor internal hex. 2mm, NP
Gingival leight 2,3,4mm
2.6mm
0.55mm
84.
Although the visual features a SEVEN implant, the abutment fits all MIS narrow internal hex. implants.
Ø2.25mm
Locator Attachment System
1 MB-NZL00
2 MB-NZL01
3 MB-NZL02
4 MB-NZL03
1:1
5 MB-NZL04
1:1
6 MB-NZL05
1:1
7 MB-NZL06
1:1
8 MM-LCT10
9 MM-LMP02
10 MM-LIC10
11 MM-LFA40
1:1.5
MB-NZL00Locator abutment 0mm hgt., NP
1
Dimensions: Height - 0mmMaterial:
MB-NZL01Locator abutment 1.0mm hgt, NP
2
Dimensions: Height - 1mmMaterial:
MB-NZL02Locator abutment 2.0mm hgt, NP
3
Dimensions: Height - 2mmMaterial:
MB-NZL03Locator abutment 3.0mm hgt, NP
4
Dimensions: Height - 3mmMaterial:
MB-NZL04Locator abutment 4.0mm hgt, NP
5
Dimensions: Height - 4 mmMaterial:
MB-NZL05Locator abutment 5.0mm hgt, NP
6
Dimensions: Height - 5mmMaterial:
MB-NZL06Locator abutment 6.0mm hgt, NP
7
Dimensions: Height - 6mmMaterial:
MM-LCT10Locator core tool
8
Material: Steel /
MM-LMP02Locator male processing package (2 Pack)
9
Dimensions: Length - 1.80mmMaterial: Steel/ Nylon
MM-LIC10Locator impression coping (4 Pack)
10
Dimensions: Length - 4.50mmDiameter - 4.70mm
Material:
MM-LFA40Locator female analog 4mm dia. (4 Pack)
11
Dimensions: Length - 10.40mmDiameter - 4mm
Material: Aluminum
Aluminum polyethylene
Titanium Nitride coated Ti Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
1:1.5
1:1.5
1:1.5
1:1
1:1
1:1
MB-NZL03Locator Narrow abutment 3.0mm
1.78mm
NARROW
Gingival height 0-6mm
Note: Locator selection should be based on
gingival height
Although the visual features a SEVEN implant, the abutment fits all Narrow internal hex. implants.
Locator Attachment System2 MM-LRM10
3 MM-LLR10
4 MM-LEL10
5 MM-LER10
6 MM-LELE1
6 MM-LPP10
7 MM-LBP10
8 MM-LSD15
1.5:1
9 MM-LSD21
1.5:1
MM-LFA40Locator female analog 4mm dia. (4 Pack)
1
Dimensions: Length - 10.40mmDiameter - 4mm
Material: Aluminum
MM-LPP10Locator parallel post (4 Pack)
6
Dimensions: Length - 15mmDiameter - 4.60mm
Material: Polyethylene Black
MM-LBP10Locator black processing replacement male (4 Pack)
7
Dimensions: Length - 1.80mmDiameter - 4.60mm
Material: Polyethylene Black
MM-LSD15Locator torque wrench driver short
8
Dimensions: Length - 15mmMaterial: Stainless steel
MM-LSD21Locator torque wrench driver long
9
Dimensions: Length - 21mmMaterial: Stainless steel
1:1
1:1
1:1
1:1
1:1
1:1
1:1
Locator light retention (4 Pack) 0°-10°*, 3 lbs**, 1.36 kg**
Locator extra-light retention (4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg**
Locator extended range (4 Pack) 10°-20°*, 3-4 lbs**, 1.36-1.82 kg**
Locator extra light-extended (4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg**
1 MM-LRM10
2 MM-LLR10
3 MM-LEL10
4 MM-LER10
5 MM-LELE1
1:1
1:1
1:1
1:1
1:1
MM-LRM101
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon
Locator replacement male clear (4 Pack) 0°-10°*, 5 lbs**, 2.27 kg**
MM-LLR102
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon Pink
MM-LEL103
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon Blue
MM-LER104
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon Green
MM-LELE15
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon Red
NARROW
86.
* For the correction of axes divergences for one implant ** Retention strength
Analog and Impression Copings
1 MD-IT100
1.5:1
2 MD-GP100
1.5:1
3 MD-I0375
1.5:1
4 MD-G0213
1.5:1
5 MD-IT300
1.5:1
6 MD-PF375
1.5:1
7 MD-RSM10
1.5:1
MD-IT100Direct impression coping for closed tray internal hex. SP
1
Dimensions: height - 9mmMaterial: Stainless steel
MD-GP100Direct impression coping guide pin Internal hex.
2
Dimensions: Length - 16.5mmMaterial: Titanium
MD-I0375Direct impression coping for open tray internal hex. SP
3
Dimensions: Height - 11mmMaterial: Stainless steel
MD-G0213Direct impression coping guide pin Internal hex.
4
Dimensions: Length - 21.3mmMaterial: Titanium
MD-IT300Direct impression coping for closed tray internal hex.
5
Dimensions: Height - 8mmMaterial: Titanium
MD-PF375Press fit impression coping for closed tray, SP
6
Dimensions: Height - 11mmMaterial: Titanium
MD-RSM10Implant analog internal hex. SP
7
Dimensions: Length - 12mmMaterial: Stainless steel
MD-IT100Direct impression coping for closed tray internal hex. SP
STANDARD
5
88.
MK-CPK611mm Complete Prosthetic kit, h. 6mm, SP
1 MD-CPK61
2 MD-RSM60
3 MM-CHC60
4 MD-IC800
5 MD-IC040
6 MD-ICH40
CPK - Complete Prosthetic Kit
MK-CPK61
MD-CPK61Anatomic 1mm transgingival abutment, crown height 6mm, SP
1
MD-RSM60Abutment analog crown height 6mm, SP
2
MM-CHC60Plastic healing cap crown h. 6mm, SP
3
MD-IC800Direct Impression coping, h. 8mm, SP
4
MD-IC040Burnout plastic cap, SP
5
MD-ICH40Burnout anti-rotation plastic cap, SP
6
STANDARD
CPK - Complete Prosthetic Kit
STANDARD
MK-CPK411mm complete prosthetic kit, crown height 4mm, SP
1
MK-CPK422mm complete prosthetic kit, crown height 4mm, SP
6
MK-CPK433mm complete prosthetic kit, crown height 4mm, SP
6
MK-CPK444mm complete prosthetic kit, crown height 4mm, SP
6
MK-CPK611mm complete prosthetic kit, crown height 6mm, SP
6
MK-CPK622mm complete prosthetic kit, crown height 6mm, SP
6
MK-CPK633mm complete prosthetic kit, crown height 6mm, SP
6
MK-CPK644mm complete prosthetic kit, crown height 6mm, SP
6
MK-CPK811mm complete prosthetic kit, crown height 8mm, SP
6
MK-CPK822mm complete prosthetic kit, crown height 8mm, SP
6
MK-CPK833mm complete prosthetic kit, crown height 8mm, SP
6
MK-CPK844mm complete prosthetic kit, crown height 8mm, SP
6
C=4mm H=1,2,3,4mm
C=Crown Height
H=Gingival Height
C=6mm H=1,2,3,4mm
C=8mm H=1,2,3,4mm
}}}
Options:
Anatomic transgingival abutment, SP
C=8mm, H=1,2,3,4mm
MD-CPK81*MD-CPK82*MD-CPK83*MD-CPK84*
C=6mm, H=1,2,3,4mm
MD-CPK61*MD-CPK62*MD-CPK63*MD-CPK64*
C=4mm, H=1,2,3,4mm
MD-CPK41*MD-CPK42*MD-CPK43*MD-CPK44*
C
H
All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MD-ICH40).
1 MD-TCH13
1.5:1
2 MD-TPH50
1.5:1
3 MD-CP013
1.5:1
4 MD-CP050
1.5:1
5 MD-CPH13
1.5:1
6 MD-CPH50
1.5:1
7 MD-GP010
1.5:1
8 MD-GPC10
1.5:1
10 MD-G0220
1.5:1
11 MD-S0200
1.5:1
12 MD-S0220
1.5:1
13 MD-S0222
14 MD-S0224
1.5:1
MD-TCH13Direct temporary cylinder with hex. internal hex. SP
1
Dimensions: Height - 11mmMaterial: Titanium
MD-TPH50Direct temporary plastic cylinder internal hex. SP
2
Dimensions: Height - 12mmDiameter - 5mm
Material: Peek
MD-CP013Direct plastic cylinder without hex. internal hex. SP
3
Dimensions: Height - 11mmDiameter - 3.75mm
Material: Burnout Plastic
MD-CP050Wide profile direct plastic cylinder without hex. SP
4
Dimensions: Height - 11mmDiameter - 5mm
Material: Burnout Plastic
MD-CPH13Direct plastic cylinder with hex. internal hex. SP
5
Dimensions: Height - 11mmDiameter - 3.75mm
Material: Burnout Plastic
MD-CPH50Wide profile direct plastic cylinder with hex. SP
6
Dimensions: Height - 11mmDiameter - 5mm
Material: Burnout Plastic
MD-GP010Direct gold plastic cylinder without hex. internal hex. SP
7
Dimensions: Height - 15mmDiameter - 5mm
Material:
STANDARD
Burnout Plastic + gold -a
9 MD-TPA12
1.5:1
MD-S0224Long prosthetic screw internal hex.
14
Dimensions: Length - 14mm 30 Ncm
Material: Titanium
MD-S0222Medium prosthetic screw internal hex.
13
Dimensions: Length - 12mm 30 Ncm
Material: Titanium
MD-S0220Direct prosthetic screw internal hex.
12
Dimensions: Length - 7.60mm 30 Ncm
Material: Titanium
MD-S0200Mini prosthetic screw internal hex.
11
Dimensions: Length - 6.90mm 30 Ncm
Material: Titanium
MD-G0220Direct gold prosthetic screw internal hex.
10
Dimensions: Length - 7.70mm20 Ncm
Material: Gold-s
MD-GPC10Direct gold plastic cylinder with hex. internal hex. SP
8
Dimensions: Height - 15mmDiameter - 5.0mm
Material: Burnout Plastic + gold -a
90.
The ”functional height“ of all abutments is measured from the platform connection and does not include the internal hex. connection.
Please note: PEEK abutments are radiolucent!
1.5:1
MD-TPA12Narrow profile temporary plastic abutment, SP
9
Dimensions: Height - 11mmDiameter - 3.75mm
Material: Peek
Direct, Screw Retained Restoration Options
1 MD-A0010
1.5:1
2 MD-P0030
1.5:1
1.5:1
4 MD-TPA10
1.5:1
MD-A0010Esthetic abutment internal hex. 1mm, SP
1
Dimensions: Height - 9mmMaterial: Titanium
MD-P0030Esthetic abutment internal hex. 3mm, SP
2
Dimensions: Height - 11mmMaterial: Titanium
MD-CTP10Narrow profile cementing post, SP
3
Dimensions: Height - 8.5mmDiameter - 3.75mm
Material: Titanium
STANDARD
8 MD-WMAC1
1.5:1
6 MD-MACF1
1.5:1
MD-WMAC1Wide profile cementing post, SP
8
Dimensions: Height - 11mmDiameter - 5.50mm
Material: Titanium
MD-MACF1Friction fit cementing post platform switching, SP
6
Dimensions: Height - 11mmDiameter - 4.80mm
Material: Titanium
7 MD-MAC10
1.5:1
MD-MAC10Standard cementing post, SP
7
Dimensions: Height - 11mmDiameter - 4.75mm
Material: Titanium
Cemented Restoration Options
3 MD-CTP10
MD-TPA10Temporary plastic abutment, SP
4
Dimensions: Height - 11mmDiameter - 4.75mm
Material: Peek
MD-TPA10Temporary plastic abutment, SP
Direct, Cemented Restoration Options
1 MD-A1510
1.5:1
2 MD-A2510
1.5:1
3 MD-AN151
1.5:1
4 MD-AN251
1.5:1
5 MD-P1530
1.5:1
6 MD-P2530
1.5:1
7 MD-G0220
1.5:1
8 MD-S0200
1.5:1
9 MD-S0220
1.5:1
10 MD-S0222
1.5:1
11 MD-S0224
1.5:1
MD-A1510Esthetic 15º angulated abutment internal hex. 1mm, SP
1
Dimensions: Height - 9mmMaterial: Titanium
MD-A2510Esthetic 25º angulated abutment internal hex. 1mm, SP
2
Dimensions: Height - 9mmMaterial: Titanium
MD-AN15115º angulated abutment internal hex. SP
3
Dimensions: Height - 9mmMaterial: Titanium
MD-AN25125º angulated abutment internal hex. SP
4
Dimensions: Height - 8.5mmMaterial: Titanium
MD-P1530Esthetic 15º angulated abutment internal hex. 3mm, SP
5
Dimensions: Height - 11mmMaterial: Titanium
MD-P2530Esthetic 25º angulated abutment internal hex. 3mm
6
Dimensions: Height - 11mmMaterial: Titanium
MD-G0220Direct gold prosthetic screw internal hex.
7
Dimensions: Length - 7.70mm 20 Ncm
Material: Gold-s
MD-S0200Mini prosthetic screw internal hex.
8
Dimensions: Length - 6.90mm 30 Ncm
Material: Titanium
MD-S0220Direct prosthetic screw internal hex.
9
Dimensions: Length - 7.60mm 30 Ncm
Material: Titanium
MD-S0222Medium prosthetic screw internal hex.
10
Dimensions: Length - 12mm 30 Ncm
Material: Titanium
MD-S0224Long prosthetic screw internal hex.
11
Dimensions: Length - 14mm 30 Ncm
Material: Titanium
STANDARD
The ” functional height “ of all abutments is measured from the platform connection and does not include the internal hex. connection.
92.
Esthetic abutments 0º Ø5.60mm
8mm
1mm
7mm
Ø3.40mm
MD-A0010
Esthetic angulated abutments 15º Angulated abutments 15º
MD-A1510
7mm
1mm
8mm
Ø5.20mm
3.50
2.40
Esthetic angulated abutments 25º Angulated abutments 25º
8mm
1mm
MD-A2510
7mm
Ø5.60mm
8mm7mm
MD-P2530
3mm
Ø5.60mm
3.50
2.40
3.30
3.30
Standard abutments
MD-CTP10
8.5mm
Ø3.75mm
MD-MAC10
11mm
Ø4.75mm
MD-WMAC1
11mm
Ø5.50mm
MD-MACF1
11mm
Ø4.75mm
8mm
3mm
7mm
MD-P1530
Ø5.20mm
8mm
3mm
7mm
MD-P0030
Ø5.60mm
Ø3.40mm
MD-AN151
1.5mm
7.5mm
Ø5.20mm
6.6mm
Ø2.80mm
Ø5.60mm
MD-AN251
1.6mm
6.9mm6.1mm
Ø3.30mm
2.40
2.80
MK-TBS4
STANDARD
For Laboratory Use Only!
94.
Scanabutment
MD-SP001Scanning abutment internal hex. connection, Standard platform
MD-S0220Direct prosthetic screw internal hex.
5
1 MD-S0220
2 MD-TB001
3 MD-RSM10
MK-TBS4
GI-SCH11Burnout anti-rotation plastic cap for Ti Base, Standard platform
4
MD-S0220Direct prosthetic screw internal hex.
1
MD-RSM10Implant analog Internal hex. Standard platform
3
MD-TB001Ti Base Internal hex. connection for CAD/CAM, Standard platform
2
4 GI-SCH11
Ti base Kit h. 4mm for internal hex. connection, SP
CAD/CAMTi Base Kit - SingleTooth Restoration
Hexagon Connection(with anti-rotational mechanism)
Hex.
MK-MUS4
STANDARD
For Laboratory Use Only!
Scanabutment
MD-SP001Scanning abutment internal hex. connection, Standard platform
MD-S0220Direct prosthetic screw internal hex.
MK-MUS4
5
1 MD-S0220
2 MD-TB002
3 MD-RSM10
4 GI-SCH11
Multi Unit Ti Base Kit h. 4mm internal hex. connection, SP
Non-Hexagon Connection(without anti-rotational mechanism)
CAD/CAMTi Base Kit -Multi Unit Restoration
MD-RSM10Implant analog Internal hex. Standard platform
3
MD-TB002Multi Unit Ti Base Internal hex. connection, Standard platform
2
MD-S0220Direct prosthetic screw internal hex.
1
GI-SCH11Burnout anti-rotation plastic cap for Ti Base, Standard platform
4
Non-Hex.
OT Equator kit
96.
OT Equator kit
96.
OT Equator Kits
96.96.
OT Equator Kits
96.
}MK-SOE1OT Equator internal hex. kit, gingival height 1mm, SP
MK-SOE2OT Equator internal hex. kit, gingival height 2mm, SP
MK-SOE3OT Equator internal hex. kit, gingival height 3mm, SP
MK-SOE4OT Equator internal hex. kit, gingival height 4mm, SP
H=1,2,3,4,5mm
Options:
MK-SOE5OT Equator internal hex. kit, gingival height 5mm, SP
STANDARD
Ball AttachmentEquator
1.7mm2.6mm
OT Equator laboratory cap (black)
Metal housing
Metal housing
OT Equator cap (0.6kg) Extra soft retention (yellow)
OT Equator cap (1.2kg)Soft retention (pink)
OT Equator cap (1.8kg)Standard retention (white)
OT Equator cap (2.7kg)High retention (violet)
Laboratory Use:
Clinical Use:
OE-RCY01
OE-RCP01
OE-RCW01
OE-RCV01
OT Equator retention caps may be purchased separately.
OT Equator Tools
Ø2.5mm
1mm
1.7mm
Ø2.5mm
2mm
1.7mm
Ø2.5mm
3mm
1.7mm
Ø2.5mm
4mm
1.7mm
Ø2.5mm
5mm
1.7mm
OT Equator Abutments
MT-SRA10Square connection to ratchet adapter
MT-LM005Long motor adapter for 0.05" hex.
MT-SHA10Hand wrench square connection
OE-RSM60OT Equator analog
OE-IC002OT Equator impression coping cap
OE-IC001OT Equator tear off impression transfer cap
ET-IT001OT Equator handling tools
MT-SM005Short motor adapter for 0.05" hex.
98.
MD-S0220Direct prosthetic screw internal hex.
1
MM-SIZW6Incisor white zircon crown, SP/NP
3
MD-IN060Incisor esthetic Ti abutment internal hex., SP
2
Non-Cemented Zircon Prosthetic Abutments
MK-SIZ6
STANDARD
5
1 MD-S0220
2 MD-IN060
3 MM-SIZW6
Zircon incisor 15º abutment set int. hex., SP
MD-S0220Direct prosthetic screw internal hex.
1
MD-CIZ60Incisor TiZi abutment int. hex., SP
2
Pre-Cemented Zirconia Prosthetic Abutments
MK-SIC6
STANDARD
5
1 MD-S0220
2 MD-CIZ60
Zircon cemented incisor 15º abutment set int. hex., SP
Zircon Abutment Kits
Zirconia abutments cannot be purchased separately. They are provided a direct prosthetic screw internal hex. (MN-S0160).
Zircon cemented incisor 15º abutment set int. hex., SP
Zircon incisor 15º abutment set int. hex., SP
MK-SIZ6Zircon incisor 15º abutment set int. hex., SP
Kit Options:
MK-SIC6Zircon cemented incisor 15º abutment set int. hex., SP}
STANDARD
1mm
8.5mm
2mm
Non-Cemented Zircon Prosthetic Abutments
MK-SPZ4
STANDARD
5
1 MD-S0220
2 MD-PM040
3 MM-SPZW4
Custom premolar abutment set int. hex. connection, SP
MD-S0220Direct prosthetic screw internal hex.
1
MM-SPZW4Premolar white zirconia crown, SP
3
MD-PM040Premolar esthetic Ti abutment internal hex. connection, SP
2
Pre-Cemented Zircon Prosthetic Abutments
MK-SPC4
STANDARD1 MD-S0220
2 MD-CPZ40
Zirconia cemented premolar abutment set int. hex., SP
MD-S0220Direct prosthetic screw internal hex.
1
MD-CPZ40Premolar TiZi abutment int. hex., SP
2
STANDARD
100.
Zircon Abutment Kits
Zirconia abutments cannot be purchased separately. They are provided with a direct prosthetic screw internal hex. (MD-S0220).
Zircon cemented premolar abutment set internal hex., SP
Custom premolar abutment set internal hex. connection, SP
MK-SPC4Zircon cemented premolar. abutment set internal hex., SP
Kit Options:
MK-SPZ4Custom premolar abutment set internal hex. connection, SP}
STANDARD
1.8mm
8.4mm
2.7mm
102.
STANDARDSTANDARD
Multi-Unit System
1 MM-IT450
1.5:1
2 MM-IO450
1.5:1
MM-IT450Multi-Unit impression coping for closed tray
1
Dimensions: Length - 8mmMaterial: Stainless steel
MM-IO450Multi-Unit impression coping for open tray
2
Dimensions: Length - 10mmMaterial: Stainless steel
MT-MUK02Multi-Unit key
3 MA-RSM10
1.5:1
MA-RSM10Multi-Unit abutment analog
3
Dimensions: Length - 12mmMaterial: Stainless steel
MT-MUK02Multi-Unit key
4
Dimensions: Length - 22mmMaterial: Stainless steel
4 MT-MUK02
1:1
MA-ANH30Multi-Unit 30deg. angulated abutment with hex.
Multi-Unit System
1 MA-S1375
1.5:1
2 MA-S2375
1.5:1
3 MA-S3375
1.5:1
4 MA-S4375
1.5:1
5 MA-ANH17
1.5:1
6 MA-ANH30
1.5:1
7 MH-00450
MA-S1375Multi-Unit abutment 1mm, SP
1
Dimensions: Height -1mm 30-35 Ncm
Material: Titanium
MA-S2375Multi-Unit abutment 2mm, SP
2
Dimensions: Height -2mm 30-35 Ncm
Material: Titanium
MA-S3375Multi-Unit abutment 3mm, SP
3
Dimensions: Height -3mm 30-35 Ncm
Material: Titanium
MA-S4375Multi-Unit abutment 4mm, SP
4
Dimensions: Height -4mm 30-35 Ncm
Material: Titanium
MA-ANH17Multi-Unit 17deg. angulated abutment with hex.
5
Material: Titanium
MA-ANH30Multi-Unit 30deg. angulated abutment with hex.
6
Material: Titanium
MH-00450Multi-Unit healing cap
7
Dimensions: Length - 3.3mmMaterial: Titanium
STANDARD8 MM-CP045
1.5:1
MM-CP045Multi-Unit plastic cylinder
8
Dimensions: Length - 10mmMaterial: Burnout plastic
9 MM-T0450
1.5:1
MM-T0450Multi-Unit Titanium temporary cylinder
9
Dimensions: Length - 10mmMaterial: Titanium
MM-MG450Multi-Unit direct gold
10
Dimensions: Length - 14.5mmMaterial: Burnout plastic+ gold -a
10 MM-MG450
1:1
11 MM-BGC45
12 MM-S0330
13 MM-G0330
MM-BGC45Multi-Unit bar gold coping
11
Dimensions: Length - 3.3 mmMaterial: Gold-e
MM-S0330Multi-Unit direct prosthetic screw
12
Dimensions: Length - 3.8mm 25 Ncm
Material: Titanium
MM-G0330Multi-Unit direct prosthetic gold screw
13
Dimensions: Length - 3.8mm 20 Ncm
Material: Gold
1.5:1
1.5:1
1.5:1
1.5:1
104.
Straight Multi-Unit abutments can be used with implants with divergence of up to 30º.
^
^
30°
17º Multi-Unit abutments can be used with implants with divergence of up to 64º.
^
^
64°
^
^
90°
30º multi unit abutments can be used with implants with divergence of up to 90º.
2.6mm
15°
1.3mm
1.2mm
17°
MA-ANH17
3.2mm
1.2mm 15°
30°
1mm
MA-ANH30
Solutions for extreme situations
Clinical summary
Multi-Unit Angulated
Place Multi Unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. To screw the abutment to the implant, position the Multi-Unit key (MT-MUK02) through the gripping bar’s opening. Recommended tightening moment is 30 Ncm.
104.
Ball Attachments
1 MB-N1375
1.5:1
2 MB-N2375
1.5:1
3 MB-N3375
1.5:1
4 MB-N4375
1.5:1
5 MB-N5375
1.5:1
6 MB-AN152
1.5:1
7 MB-AN252
1.5:1
8 MB-RS375
1:1
MB-N1375Ball attachment anchor internal hex. 1mm, SP
1
Dimensions: Height - 1mmMaterial: Titanium
MB-N2375Ball attachment anchor internal hex. 2mm, SP
2
Dimensions: Height - 2mmMaterial: Titanium
MB-N3375Ball attachment anchor internal hex. 3mm, SP
3
Dimensions: Height - 3mmMaterial: Titanium
MB-N4375Ball attachment anchor internal hex. 4mm, SP
4
Dimensions: Height - 4mmMaterial: Titanium
MB-N5375Ball attachment anchor internal hex. 5mm, SP
5
Dimensions: Height - 5mmMaterial: Titanium
STANDARD
MB-RS375Ball attachment analog internal hex.
8
Dimensions: Length - 15.1mmMaterial: Stainless steel
MB-AN252Ball anchor 25 deg. angulated abutment
7
Material: Titanium
MB-AN152Ball anchor 15 deg. angulated abutment
6
Material: Titanium
Gingival height 1,2,3,4,5mm
2.6mm
9 MT-NB225
1:1
MT-NB225Ball attachment anchor key
9
Dimensions: Length - 22mmMaterial: Stainless steel
Although the visual features a SEVEN implant, the abutment fits all Standard MIS internal hex. implants.
MB-N3375Ball attachment anchor internal hex. 3mm
Ø2.25mm
Angulated Ball Attachments
1 MB-PPR10
2 MB-DB235
1:1
3 MB-PPC10
4 MB-TTP10
5 MB-PR010
STANDARD
2:1
2:1
2:1
2:1
2:1
3:1
11 MB-DB235
1:1
8 MB-DMH10
1:1
9 MB-PPC10
7 MT-TSD10
1:2
10 MB-PPR10
5 MB-TBS10
6 MB-TBS20
MB-TTP10Titanium ball cap
3
Dimensions: Length - 3.1mmMaterial: Titanium
MB-DB235Plastic disc for ball attachment
11
Dimensions: Diameter - 15mmMaterial: Plastic
MB-PR010Plastic mounting sleeve
4
Dimensions: Length - 2mmDiameter - 3.8mm
Material: Plastic
MB-TBS10Titanium ball cap spring standard
5
Dimensions: Diameter - 2.50mmMaterial: Steel
MB-TBS20Titanium ball cap spring soft
6
Dimensions: Diameter - 2.60mmMaterial: Steel
MB-DMH10Double metal housing
8
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1 MB-SF200
2 MB-GPS10
MB-SF200Plastic ball cap
1
Dimensions: Length - 3.5mmMaterial: Plastic
MB-GPS10Gold ball cap
2
Dimensions: Length - 2.4mmMaterial: Gold-e
4 MB-PR010MT-TSD10Screw driver for titanium ball cap
7
Dimensions: Length - 60mmMaterial: Stainless steel
3 MB-TTP10
106.
MB-DB235Plastic disc for ball attachment
MB-PPC10Standard plastic cap for metal housing
9
Dimensions: Length - 2.6mmRetention 1200-1300g
Material: Plastic
MB-PPR10Soft plastic cap for metal housing
10
Dimensions: Length - 2.6mmRetention 800-950g
Material: Plastic
Angulated Ball Attachments
^
^
30°
15°^^ ^̂15°
^ ^
50°
25° 25°^^ ^̂
Solutions for extreme situations
MB-AN152
3mm
1.7mm
Ø4.6
15°
Ball Ø2.25
Clinical summary
Place the ball anchor angulated abutment (15°/25°) on the implant by the gripping bar. To screw the abutment to the implant, position the hand hex. driver (MT-HHR13) through the gripping bar opening. Recommended tightening moment is 30 Ncm.
1.7mm
Ø4.6
3.5mm25°
MB-AN252
Ball Ø2.25
15º ball attachments canbe used with implants withdivergence of up to 30º.
25º ball attachments canbe used with implants withdivergence of up to 50º.
Locator Attachment System
1 MB-SZL00
2 MB-SZL01
3 MB-SZL02
4 MB-SZL03
1:1
5 MB-SZL04
1:1
6 MB-SZL05
1:1
7 MB-SZL06
1:1
8 MM-LCT10
9 MM-LMP02
10 MM-LIC10
11 MM-LFA40
1:1.5
MB-SZL00Locator abutment 0mm hgt., standard platform
1
Dimensions: Height - 0mmMaterial:
MB-SZL01Locator abutment 1mm hgt., Standard platform
2
Dimensions: Height - 1mmMaterial:
MB-SZL02Locator abutment 2mm hgt., Standard platform
3
Dimensions: Height - 2mm Material:
MB-SZL03Locator abutment 3mm hgt., Standard platform
4
Dimensions: Height - 3mmMaterial:
MB-SZL04Locator abutment 4mm hgt., Standard platform
5
Dimensions: Height - 4mmMaterial:
MB-SZL05Locator abutment 5mm hgt., Standard platform
6
Dimensions: Height - 5mmMaterial:
MB-SZL06Locator abutment 6mm hgt., Standard platform
7
Dimensions: Height - 6mmMaterial:
MM-LCT10Locator core tool
8
Material: Steel
MM-LMP02Locator male processing package (2 Pack)
9
Dimensions: Length - 1.80mmMaterial: Steel/ Nylon
MM-LIC10Locator impression coping (4 Pack)
10
Dimensions: Length - 4.50mmDiameter - 4.70mm
Material:
MM-LFA40Locator female analog 4mm dia. (4 Pack)
11
Dimensions: Length - 10.40mmDiameter - 4mm
Material:
STANDARD
Aluminum polyethylene
Aluminum polyethylene
Titanium Nitride coated TiTitanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
1:1.5
1:1.5
1:1.5
1:1
1:1
1:1
MB-SZL033mm Locator Standard abutment
1.78mm
108.
Although the visual features a SEVEN implant, the abutment fits all Standard MIS internal hex. implants.
Gingival height 0-6mm
*Note: Locator selection should be based on
gingival height
Locator Attachment System2 MM-LRM10
3 MM-LLR10
4 MM-LEL10
5 MM-LER10
6 MM-LELE1
6 MM-LPP10
7 MM-LBP10
8 MM-LSD15
1.5:1
9 MM-LSD21
1.5:1
MM-LFA40Locator female analog 4mm dia. (4 Pack)
1
Dimensions: Length - 10.40mmDiameter - 4mm
Material: Aluminum
MM-LPP10Locator parallel post (4 Pack)
6
Dimensions: Length - 15mmDiameter - 4.60mm
Material: Polyethylene black
MM-LBP10Locator black processing replacement male (4 Pack)
7
Dimensions: Length - 1.80mmDiameter - 4.60mm
Material: Polyethylene black
MM-LSD15Locator torque wrench driver short
8
Dimensions: Length - 15mmMaterial: Stainless steel
MM-LSD21Locator torque wrench driver long
9
Dimensions: Length - 21mmMaterial: Stainless steel
1:1
1:1
1:1
1:1
1:1
1:1
1:1
Locator light retention (4 Pack) 0°-10°*, 3 lbs**, 1.36 kg
Locator extra light retention (4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg
Locator extended range (4 Pack) 10°-20°*, 3-4 lbs**, 1.36-1.82 kg
Locator extra-light extended (4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg
1 MM-LRM10
2 MM-LLR10
3 MM-LEL10
4 MM-LER10
5 MM-LELE1
1:1
1:1
1:1
1:1
1:1
MM-LRM101
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon
Locator replacement male clear (4 Pack) 0°-10°*, 5 lbs**, 2.27 kg
MM-LLR102
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon pink
MM-LEL103
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon blue
MM-LER104
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon green
MM-LELE15
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon red
STANDARD
* For the correction of the axes divergences for one implant ** Retention strength
Direct impression coping for closed tray internal hex., WP
MW-IT300
110.
Analog and Impression Copings
1 MW-I0470
1.5:1
2 MD-G0213
1.5:1
3 MW-IT100
1.5:1
4 MD-GP100
1.5:1
5 MW-IT300
1.5:1
6 MW-PF550
2:1
7 MW-RSM10
1.5:1
MW-I0470Impression coping for open tray internal hex. WP
1
Dimensions: Height - 11mmMaterial: Stainless steel
MD-G0213Direct impression coping guide pin internal hex.
2
Dimensions: Length - 21.3mmMaterial: Titanium
MW-IT100Impression coping for closed tray internal hex. WP
3
Dimensions: Height - 9mmMaterial: Stainless steel
MD-GP100Direct impression coping guide pin internal hex.
4
Dimensions: Length - 16.5mmMaterial: Titanium
MW-IT300Direct impression coping for closed tray internal hex. WP
5
Dimensions: Height - 8mmMaterial: Titanium
MW-PF550Direct press fit for closed tray WP
6
Dimensions: Height - 11mmMaterial: Titanium
MW-RSM10Wide. implant analog internal hex. WP
7
Dimensions: Length - 12mmMaterial: Stainless steel
WIDE
MW-I0470Impression coping for
open tray internal hex., WP
5
112.
MK-WPK611mm complete prosthetic kit, crown height 6mm, WP
1 MW-CPK61
2 MW-RSM60
3 MW-CHC60
4 MW-IC800
5 MW-IC040
6 MW-ICH40
CPK - Complete Prosthetic Kit
MK-WPK61
MW-CPK61Anatomic 1mm transgingival abutment, crown height 6mm, WP
1
MW-RSM60Wide abutment analog crown height 6mm, WP
2
MW-CHC60Wide plastic healing cap h. 6mm, WP
3
MW-IC800Direct impression coping h. 8mm, WP
4
MW-IC040Burnout plastic cap, WP
5
MW-ICH40Burnout anti-rotation plastic cap, WP
6
WIDE
CPK - Complete Prosthetic Kit
WIDE
MK-WPK411mm complete prosthetic kit, crown height 4mm, WP
1
MK-WPK422mm complete prosthetic kit, crown height 4mm, WP
6
MK-WPK433mm complete prosthetic kit, crown height 4mm, WP
6
MK-WPK444mm complete prosthetic kit, crown height 4mm, WP
6
MK-WPK611mm complete prosthetic kit, crown height 6mm, WP
6
MK-WPK622mm complete prosthetic kit, crown height 6mm, WP
6
MK-WPK633mm complete prosthetic kit, crown height 6mm, WP
6
MK-WPK644mm complete prosthetic kit, crown height 6mm, WP
6
MK-WPK811mm complete prosthetic kit, crown height 8mm, WP
6
MK-WPK822mm complete prosthetic kit, crown height 8mm, WP
6
MK-WPK833mm complete prosthetic kit, crown height 8mm, WP
6
MK-WPK844mm complete prosthetic kit, crown height 8mm, WP
6
Kit Options:
C=4mm, H=1,2,3,4mm
C=Crown Height
H=Gingival Height
C=6mm, H=1,2,3,4mm
C=8mm, H=1,2,3,4mm
}}}
C=4mm, H=1,2,3,4mm
MW-CPK41*MW-CPK42*MW-CPK43*MW-CPK44*
C=6mm, H=1,2,3,4mm
MW-CPK61*MW-CPK62*MW-CPK63*MW-CPK64*
C=8mm, H=1,2,3,4mm
MW-CPK81*MW-CPK82*MW-CPK83*MW-CPK84*
C
H
Anatomic transgingival abutment, WP
All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MW-ICH40).
1 MW-CPH13
1.5:1
2 MW-CP013
1.5:1
3 MW-CPH60
1.5:1
4 MW-CP060
1.5:1
5 MW-TPH50
1.5:1
6 MW-GPC10
1.5:1
7 MW-GP010
1.5:1
9 MD-G0220
1.5:1
10 MD-S0200
1.5:1
11 MD-S0220
1.5:1
12 MD-S0222
1.5:1
13 MD-S0224
1.5:1
MW-CPH13Wide dia. plastic cylinder with hex. internal hex.
1
Dimensions: Height - 11mmDiameter - 4.50mm
Material: Burnout plastic
MW-CP013Wide dia. plastic cylinder without hex. internal hex.
2
Dimensions: Height - 11mmDiameter - 4.50mm
Material: Burnout plastic
MW-CPH60Direct plastic cylinder with hex. dia.6mm WP
3
Dimensions: Height - 11mmDiameter - 6.50mm
Material: Burnout plastic
MW-CP060Direct plastic cylinder without hex. dia. 6mm, WP
4
Dimensions: Height - 11mmDiameter - 6.50mm
Material: Burnout plastic
MW-TPH50Wide direct temporary plastic cylinder internal hex.
5
Dimensions: Height - 12mmDiameter - 5.50mm
Material: Peek
MW-GPC10Wide gold plastic cylinder with hex. internal hex.
6
Dimensions: Height - 15mmDiameter - 5.50mm
Material:
MW-GP010Direct gold abutment without hex. WP
7
Dimensions: Height - 15mmDiameter - 5.50mm
Material:
WIDE
Burnout plastic + Gold-a
Burnout plastic + Gold-a
8 MW-TPA12
1.5:1
MW-TPA12Narrow profile temporary plastic abutment, WP
8
Dimensions: Height - 11mmDiameter - 4.50mm
Material: Peek
MD-S0224Long prosthetic screw internal hex.
13
Dimensions: Length - 13.8mm 30 Ncm
Material: Titanium
MD-S0222Medium prosthetic screw internal hex.
12
Dimensions: Length - 11.7mm 30 Ncm
Material: Titanium
MD-S0220Direct prosthetic screw internal hex.
11
Dimensions: Length - 7.6mm 30 Ncm
Material: Titanium
MD-S0200Mini prosthetic screw internal hex.
10
Dimensions: Length - 6.9mm 30 Ncm
Material: Titanium
MD-G0220Direct gold prosthetic screw internal hex.
9
Dimensions: Length - 7.7mm 20 Ncm
Material: Gold-s
114.
The ”functional height“ of all abutments is measured from the platform connection and does not include the Internal hex. connection.
Please note: PEEK abutments are radiolucent!
Direct, Screw Retained Restoration Options
1 MW-MAC10
1.5:1
2 MW-CTP10
1.5:1
3 MW-WMAC1
1.5:1
MW-MAC10Wide platform cementing post
1
Dimensions: Height - 11mmDiameter - 5.5mm
Material: Titanium
MW-CTP10Direct conical titanium post for WP
2
Dimensions: Height - 8.5mmDiameter - 5.5mm
Material: Titanium
MW-WMAC1Wide profile cementing post for WP
3
Dimensions: Height - 11mmDiameter - 6.5mm
Material: Titanium
WIDE
MW-TPA10Temporary plastic abutment, WP
4
Dimensions:Material: Peek
Height - 11mmDiameter - 5.5mm
4 MW-TPA10
1.5:1
Cemented Restoration Options
MW-MAC10Wide platform cementing post
116.
WIDE
Direct, Cemented Restoration Options
1 MW-AN151
1.5:1
2 MW-P0010
1.5:1
3 MW-P1510
1.5:1
MW-AN151Wide 15º angulated abutment internal hex.
1
Dimensions: Height - 9mmMaterial: Titanium
MW-P0010Wide esthetic abutment internal hex. 1mm
2
Dimensions: Height - 9mmMaterial: Titanium
MW-P1510Wide esthetic 15º angulated abutment internal hex. 1mm
3
Dimensions: Height - 9mmMaterial: Titanium
MW-P1510Wide esthetic 15 angulated abutment internal hex. 1mm
4 MD-G0220
1.5:1
5 MD-S0200
1.5:1
6 MD-S0220
1.5:1
7 MD-S0222
1.5:1
8 MD-S0224
1.5:1
MD-G0220Direct gold prosthetic screw internal hex.
4
Dimensions: Length - 7.70mm 20 Ncm
Material: Gold-s
MD-S0200Mini prosthetic screw internal hex.
5
Dimensions: Length - 6.90mm 30 Ncm
Material: Titanium
MD-S0220Direct prosthetic screw internal hex.
6
Dimensions: Length - 7.60mm 30 Ncm
Material: Titanium
MD-S0222Medium prosthetic screw internal hex.
7
Dimensions: Length - 11.7mm 30 Ncm
Material: Titanium
MD-S0224Long prosthetic screw internal hex.
8
Dimensions: Length - 13.8mm 30 Ncm
Material: Titanium
Esthetic angulated abutments 15º Angulated abutments 15º
4.50
2.90
4.50
2.90
Standard abutments
MW-AN151
Ø4.50mm
Ø4mm
9mm
MW-P1510
Ø4.50mm
1mm
9mm
MW-CTP10
Ø4.50mm
8.5mm
MW-MAC10
Ø4.50mmØ5.50mm
11mm
MW-WMAC1
Ø4.50mmØ6.50mm
11mm
Esthetic abutments 0º
MW-P0010
Ø6.30mm
Ø4.30mm
1mm
8mm
MK-TBW4
For Laboratory Use Only!
Scanabutment MD-S0220
Direct prosthetic screw internal hex.
MW-SP001Scanning abutment internal hex. connection, Wide platform
5
1 MD-S0220
2 MW-TB001
3 MW-RSM10
MK-TBW4
118.
WIDE
4 GI-WCH11
Ti Base Kit h. 4mm for internal hex. connection, WP
CAD/CAMTi Base Kit - SingleTooth Restoration
Hexagon Connection(with anti-rotational mechanism)
MD-S0220Direct prosthetic screw internal hex.
1
MW-RSM10Implant analog internal hex. Wide platform
3
MW-TB001Ti Base internal hex. connection for CAD/CAM, Wide platform
2
GI-WCH11Burnout anti-rotation plastic cap for Ti Base, Wide platform
4
Hex.
MK-MUW4
For Laboratory Use Only!
Scanabutment MD-S0220
Direct prosthetic screw internal hex.
MW-SP001Scanning abutment internal hex. connection, Wide platform
5
1 MD-S0220
2 MW-TB002
3 MW-RSM10
3
2
WIDE
4 GI-WCH11
MK-MUW4Multi-Unit Ti Base kit h. 4mm internal hex. connection, WP
Non Hexagon Connection(without anti-rotational mechanism)
CAD/CAMTi Base Kit -Multi-Unit Restoration
MD-S0220Direct prosthetic screw internal hex.
1
MW-RSM10Implant analog internal hex. Wide platform
MW-TB002Multi-Unit Ti Base internal hex. connection, Wide platform
GI-WCH11Burnout anti-rotation plastic cap for Ti Base, Wide platform
4
Non-Hex.
OT Equator kit
120.
OT Equator kit
120.
OT Equator Kits
120.120.
OT Equator Kits
120.
}MK-WOE1OT Equator internal hex. kit, gingival height 1mm, WP
MK-WOE3OT Equator internal hex. kit, gingival height 3mm, WP
MK-WOE5OT Equator internal hex. kit, gingival height 5mm, WP
H=1,3,5mm
Options:
WIDE
Ball AttachmentEquator
1.9mm2.6mm
OT Equator laboratory cap (black)
Metal housing
Metal housing
OT Equator cap (0.6kg) Extra soft retention (yellow)
OT Equator cap (1.2kg)Soft retention (pink)
OT Equator cap (1.8kg)Standard retention (white)
OT Equator cap (2.7kg)High retention (violet)
Laboratory Use:
Clinical Use:
OE-RCY01
OE-RCP01
OE-RCW01
OE-RCV01
OT Equator retention caps may be purchased separately.
OT Equator Tools
OT Equator Abutments
Ø2.5mm
5mm
1.9mm
3mm
Ø2.5mm
1.9mm
1mm
1.9mm
Ø2.5mm
MT-SRA10Square connection to ratchet adapter
MT-LM005Long motor adapter for 0.05" hex.
MT-SHA10Hand wrench square connection
OE-RSM60OT Equator analog
OE-IC002OT Equator impression coping cap
OE-IC001OT Equator tear off impression transfer cap
ET-IT001OT Equator handling tools
MT-SM005Short motor adapter for 0.05" hex.
122.
MD-S0220Direct prosthetic screw internal hex.
1
MW-CPZ40Premolar TiZi abutment int. hex., WP
2
Pre-Cemented Zircon Prosthetic Abutments
MK-WPC4
1 MD-S0220
2 MW-CPZ40
Zirconia cemented premolar abutment set int. hex., WP
MD-S0220Direct prosthetic screw internal hex.
1
MW-PM040Premolar esthetic Ti abutment internal hex. connection, WP
2
Pre-Cemented Zircon Prosthetic Abutments
MK-WPZ45
1 MD-S0220
2 MW-PM040
3 MM-WPZW4
Custom premolar abutment set internal hex. connection, WP
MM-WPZW4Premolar white zirconia crown, WP
3
WIDE
WIDE
Zirconia Abutment Kits
Zirconia abutments cannot be purchased separately. They are provided with a direct prosthetic screw internal hex. (MD-S0220).
Zirconia cemented incisor abutment set internal hex., WP
Custom premolar abutment set int. hex. connection, WP
MK-WPC4Zircon cemented premolar. abutment set internal hex., WP
Kit Options:
MK-WPZ4Custom premolar abutment set internal hex. connection, WP}
WIDE
8.4mm
2.7mm1.8mm
124.
Multi-Unit System
WIDE1 MM-IT450
1.5:1
2 MM-IO450
1.5:1
3 MA-RSM10
1.5:1
4 MA-W1500
1.5:1
5 MA-W2500
1.5:1
6 MA-W3500
1.5:1
7 MA-W4500
1.5:1
8 MM-T0450
1.5:1
MA-W1500Wide platform Multi-Unit abutment 1mm
4
Dimensions: Height- 1mm 30-35 Ncm
Material: Titanium
MA-W2500Wide platform Multi-Unit abutment 2mm
5
Dimensions: Height-2mm 30-35 Ncm
Material: Titanium
MA-W3500Wide platform Multi-Unit abutment 3mm
6
Dimensions: Height - 3mm 30-35 Ncm
Material: Titanium
MA-W4500Wide platform Multi-Unit abutment 4mm
7
Dimensions: Height - 4mm 30-35 Ncm
Material: Titanium
MM-IT450Multi-Unit impression coping for closed tray
1
Dimensions: Length - 8mmMaterial: Stainless steel
MA-RSM10Multi-Unit abutment analog
3
Dimensions: Length - 12mmMaterial: Stainless steel
MM-T0450Multi-Unit temporary cylinder
8
Dimensions: Length - 10mmMaterial: Titanium
MM-IO450Multi-Unit impression coping for open tray
2
Dimensions: Length - 10mmMaterial: Stainless steel
MM-T0450Multi-Unit temporary cylinder
Multi-Unit System
WIDE
7 MT-MUK02
1:1
1 MM-CP045
1.5:1
2 MM-MG450
1:1
3 MH-00450
4 MM-BGC45
5 MM-S0330
6 MM-G0330
1.5:1
1.5:1
1.5:1
1.5:1
MH-00450Multi-Unit healing cap
3
Dimensions: Height - 3.3mm 15 Ncm
Material: Titanium
MM-BGC45Multi-Unit bar gold coping
4
Dimensions: Length - 3.3mmMaterial: Gold
MM-S0330Multi-Unit direct prosthetic screw
5
Dimensions: Length - 3.8mm 25 Ncm
Material: Titanium
MM-G0330Multi-Unit direct prosthetic gold screw
6
Dimensions: Length - 3.8mm 20 Ncm
Material: Gold
MM-CP045Multi-Unit plastic cylinder
1
Dimensions: Length - 10mmMaterial: Burnout plastic
MM-MG450Multi-Unit direct gold
2
Dimensions: Length - 14.5mmMaterial:
MT-MUK02Multi-Unit key
7
Dimensions: Length - 22mmMaterial: Stainless steel
MM-MG450Multi-Unit direct gold
Burnout plastic+gold - a
1 MW-B1500
1.5:1
2 MW-B3500
1.5:1
3 MW-B5500
1.5:1
MW-B1500Wide ball attachment anchor internal hex. 1mm
1
Dimensions: Height - 1mmMaterial: Titanium
MW-B3500Wide ball attachment anchor internal hex. 3mm
2
Dimensions: Height - 3mmMaterial: Titanium
MW-B5500Wide ball attachment anchor internal hex. 5mm
3
Dimensions: Height - 5mmMaterial: Titanium
MT-NB225Ball attachment anchor key
4
Dimensions: Length - 22mmMaterial: Stainless steel
MB-RS375Ball attachment analog internal hex.
5
Dimensions: Length - 15.1mmMaterial: Stainless steel
Ball Attachment System
WIDE
126.
4 MT-NB225
1:1
5 MB-RS375
1:1
MW-B3500Wide ball attachment anchor internal hex. 3mm
2.6mm
Gingival height 1,3,5mm
Although the visual features a SEVEN implant, the abutment fits all Wide MIS internal hex. implants.
Ø2.25mm
Ball Attachment System
WIDE1 MB-SF200
11 MB-DB235
1:1
2 MB-GPS10
8 MB-DMH10
1:1
9 MB-PPC10
3 MB-TTP10
7 MT-TSD10
1:2
10 MB-PPR10
4 MB-PR010
MB-GPS10Gold ball cap
2
Dimensions: Length - 2.4mmMaterial: Gold-e
MB-TTP10Titanium ball cap
3
Dimensions: Length - 3.1mmMaterial: Titanium
MB-DB235Plastic disc for ball attachment
11
Dimensions: Diameter - 15mmMaterial: Plastic
MB-DMH10Double metal housing
8
MT-TSD10Screw driver for titanium ball cap
7
Dimensions: Length - 60mmMaterial: Stainless steel
MB-TBS10Titanium ball cap spring standard
5
Dimensions: Diameter - 2.5mmMaterial: Steel
MB-TBS20Titanium ball cap spring soft
6
Dimensions: Diameter - 2.6mmMaterial: Steel
MB-PR010Plastic mounting sleeve
4
Dimensions: Length - 2mmMaterial: Plastic
1.5:1
1.5:1
1.5:1
1.5:1
5 MB-TBS10
1.5:1
6 MB-TBS20
1.5:1
2:1
2:1
MB-SF200Plastic ball cap
1
Dimensions: Length - 3.5mmMaterial: Plastic
MB-SF200Plastic ball cap
MB-PPC10Standard plastic cap for metal housing
9
Dimensions: Length - 2.6mmRetention 1200-1300g
Material: Plastic
MB-PPR10Soft plastic cap for metal housing
10
Dimensions: Length - 2.6mmRetention 800-950g
Material: Plastic
128.
WIDE
Locator Attachment System
1 MB-WZL00
2 MB-WZL01
3 MB-WZL02
1:1
4 MB-WZL03
1:1
5 MB-WZL04
1:1
6 MB-WZL05
1:1
7 MB-WZL06
1:1
8 MM-LIC10
9 MM-LFA50
1.5:1
MB-WZL00Locator abutment 0mm height, Wide platform
1
Dimensions: Height- 0mmMaterial: Titanium Nitride coated Ti
MB-WZL01Locator abutment 1mm height, wide platform
2
Dimensions: Height - 1mmMaterial:
MB-WZL02Locator abutment 2mm height, wide platform
3
Dimensions: Height - 2mmMaterial:
MB-WZL03Locator abutment 3mm height, wide platform
4
Dimensions: Height - 3mmMaterial:
MB-WZL04Locator abutment 4mm height, Wide platform
5
Dimensions: Height - 4mmMaterial:
MB-WZL05Locator abutment 5mm height, wide platform
6
Dimensions: Height - 5mmMaterial:
MB-WZL06Locator abutment 6mm height, Wide platform
7
Dimensions: Height - 6mmMaterial:
MM-LIC10Locator impression coping (4 Pack)
8
Dimensions: Length - 4.50mmMaterial:
MM-LFA50Locator female analog 5mm dia. (4 Pack)
9
Dimensions: Height- 10.4mmDiameter - 5mm
Material: Aluminum
WIDE
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Aluminum Polyethylene
Titanium Nitride coated Ti
Titanium Nitride coated Ti
Titanium Nitride coated Ti
1:1
1:1
1.5:1
1.5:1
10 MM-LMP02
MM-LMP02Locator male processing package (2 Pack)
10
Dimensions: Length - 1.80mmMaterial: Steel/ Nylon
1.78mm
MB-WZL022.0mm Locator Wide abutment
Although the visual features a SEVEN implant, the abutment fits all MIS wide internal hex. implants.
Gingival height 0-6mm
Note: Locator selection should be based on
gingival height
Locator Attachment System
1 MM-LRM10
2 MM-LLR10
3 MM-LEL10
4 MM-LER10
5 MM-LELE1
6 MM-LPP10
7 MM-LBP10
8 MM-LSD15
1.5:1
1
MM-LLR10Locator light retention (4 Pack) 0°-10°*, 3 lbs**, 1.36 kg**
2
Dimensions: Length - 1.8mmDiameter - 4.70mm
Material: Nylon pink
MM-LEL10Locator extra light retention (4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg**
3
Dimensions: Length - 1.8mmDiameter - 4.70mm
Material: Nylon blue
MM-LER104
Dimensions: Length - 1.8mmDiameter - 4.70mm
Material: Nylon green
MM-LELE1Locator extra light extended (4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg
5
Dimensions: Length - 1.8mmDiameter - 4.70mm
Material: Nylon Red
MM-LPP10Locator parallel post (4 Pack)
6
Dimensions: Length - 15mmDiameter - 4.60mm
Material: Polyethylene black
MM-LBP10Locator black processing replacement male (4 Pack)
7
Dimensions: Length - 1.80mmDiameter - 4.60mm
Material: Polyethylene black
MM-LSD15Locator torque wrench driver short
8
Dimensions: Length - 15mmMaterial: Stainless steel
MM-LSD21Locator torque wrench driver long
9
Dimensions: Length - 21mmMaterial: Stainless steel
WIDE
Locator extended range (4 Pack) 10°-20°*, 3-4 lbs**, 1.36-1.82 kg**
MM-LSD21Locator torque wrench
long driver
1:1 1:1
1:1
1:1
1:1
1:1
1:1
MM-LELE1Locator extra light extended (4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg**
5
Dimensions: Length - 1.8mmDiameter - 4.70mm
Material: Nylon red
9 MM-LSD21
1.5:1
MM-LRM10Locator replacement male clear (4 Pack) 0°-10°*, 5 lbs**, 2.27 kg**
1
Dimensions: Length - 1.80mmDiameter - 4.70mm
Material: Nylon
* For the correction of the axes divergences for a single implant ** Retention strength
130.
Bar Attachments
1 MM-TRU10
1:2
2 MM-GRU10
1:2
3 MM-PBU10
1:3
4 MM-GBU10
1:2
5 MM-TC100
6 MM-PC100
1:3
7 MM-GB100
1:2
MM-TRU10Titanium rider-ovoid
1
Dimensions: Length - 50mmHeight - 2.9mm
Material: Titanium
MM-GRU10Gold rider-ovoid
2
Dimensions: Length - 50mmHeight - 2.8mm
Material: Gold-e
MM-PBU10Plastic bar-ovoid
3
Dimensions: Length - 80mmHeight - 2.3mm
Material: Plastic
MM-GBU10Gold bar-ovoid
4
Dimensions: Length - 50mmHeight - 2.3mm
Material: Gold-e
MM-TC100Gold rider-round
5
Dimensions: Length - 3.5mmHeight - 2.5mm
Material: Gold-e
MM-PC100Plastic bar-round
6
Dimensions: Length - 85mmDiameter - 2mm
Material: Burnout plastic
MM-GB100Gold bar-round
7
Dimensions: Length - 50mmDiameter - 1.90mm
Material: Gold-e
2:1
131.
MIS offers a wide range of innovative tools and instruments,
providing simple and easy solutions for clinicians and
lab technicians.
Accessories.
131.
132.
Prosthetic Instruments
1 MT-AL005
1:3
2 MT-TSD10
1:2
3 MT-IT100
1:1
MT-AL005Allen key 0.05"
1
Dimensions: Length - 72mmMaterial: Stainless steel
MT-TSD10Screw driver for Titanium ball cap
2
Dimensions: Length - 50mmMaterial: Stainless steel
MT-IT100Closed tray impression coping key
3
Dimensions: Length - 16.5mmMaterial: Stainless steel
5 MT-LM005
1:1
4
MT-NB225Ball attachment anchor key
6
Dimensions: Length - 22mmMaterial: Stainless steel
6 MT-NB225
1:1
MT-NB225Ball attachment anchor key
MT-SM005
1:1
MT-SM005Short motor adapter for 0.05" hex.
4
Dimensions: Length - 24mmMaterial: Stainless steel
MT-LM005Long motor adapter for 0.05" hex.
5
Dimensions: Length - 33mmMaterial: Stainless steel
Prosthetic Instruments
1 MT-HHR07
1:1
2 MT-HHR13
1:1
3 MT-HDS30
1:1
4 MT-HDL30
1:1
5 MT-IE172
1:1
6 MT-IE160
1:1
MT-HHR07Short hand screwdriver for 0.05" hex.
1
Dimensions: Length - 22mmMaterial: Stainless steel
MT-HHR13Long hand screwdriver for 0.05" hex.
2
Dimensions: Length - 29mmMaterial: Stainless steel
MT-HDS30Short hex. drive 0.05"
3
Dimensions: Length - 16mmMaterial: Stainless steel
MT-HDL30Long hex. drive 0.05"
4
Dimensions: Length - 22mmMaterial: Stainless steel
MT-IE172Int. connection abutment extractor
5
Dimensions: Length - 27mmMaterial: Titanium
MT-IE160Int. connection abutment extractor, NP
6
Dimensions: Length - 27mmMaterial: Titanium
Prosthetic Instruments
1 MT-MSD20
1:4
2 MT-UN002
1:1
MT-MSD20Surgical adapter driver
1
Dimensions: Length - 120mmMaterial:
MT-UN002Int. hex. implant analog NP for universal hand driver
2
Dimensions: Length - 24mmMaterial: Stainless steel
MT-US002Int. hex. implant analog SP for universal hand driver
3
Dimensions: Length - 24mmMaterial: Stainless steel
Stainless steel+Aluminum
Stainless steel + Plastic
Stainless steel
7 MT-GDM01
1:3
6 MT-HTS10
1:4
1:1
5 MT-CS450
4 MT-UW002
1:1
3 MT-US002
1:1MT-GDM01Gingival depth measuring 2/4/6/8 mm
7
Dimensions: Length - 100mmMaterial: Stainless steel
MT-HTS10Technical hex. screw driver
6
Dimensions: Length - 142.5mmMaterial:
MT-CS450Shoulders reamer
5
Material:
MT-UW002Wide int. hex. implant analog for universal hand driver
4
Dimensions: Length - 24mmMaterial: Stainless steel
134.
MT-MSD20Surgical adapter driver
5
Zircon Diamond Burr Set
MK-DB01
The Zircon Diamond Burr Set consists of commonly used smooth diamond burrs, required for proper preparation of zircon abutments.
MT-A4022Diamond burr 2.20mm
1
MT-B4018Diamond burr 1.80mm
2
MT-C3125Diamond burr 2.50mm
3
MT-F2121Diamond burr 2.10mm
4
MT-K2023Diamond burr 2.30mm
5
1 MT-A4022
2 MT-B4018
3 MT-C3125
4 MT-F2121
5 MT-K2023
MK-DB01Zircon Diamond Burr Set
The MIS Prosthetic Planning Kit consists of replicas of the most commonly used MIS cement retained abutments. The kit allows doctors and technicians to evaluate different abutments and to select the best fitting size, diameter and shape on a case-by-case basis. The replicas can be used either directly in the patient's mouth or on implant-level master models. The Titanium superstructures are color coded, in accordance with MIS platform colors: purple for Standard and green for Wide.
MK-0040Prosthetic Planning Kit
MK-0040
Prosthetic Planning Kit
136.
Pcs: Pcs: Pcs:Pcs:
Kit Contents
MK-0040Prosthetic Planning Kit
MD-CPK81-1Colored Anatomic 1mm transgingival abutment, h. 8mm, SP
1
MD-CPK82-2Colored Anatomic 2mm transgingival abutment, h. 8mm, SP
1
MD-CPK83-3Colored Anatomic 3mm transgingival abutment, h. 8mm, SP
1
MD-CPK84-4Colored Anatomic 4mm transgingival abutment, h. 8mm, SP
1
MD-CTP10-5Colored Narrow profile cementing post
1
MD-MAC10-6Colored Standard cementing post
1
MD-P0030-7Colored Esthetic abutment internal hex. 3mm
1
MD-P1530-13Colored Esthetic 15 angulated abutment internal hex. 3mm
1
MD-A0010-8Colored Esthetic abutment internal hex. 1mm
1
MD-A1510-11Colored Esthetic 15 angulated abutment internal hex. 1mm
1
MD-A2510-12Colored Esthetic 25 angulated abutment internal hex. 1mm
1
MD-AN151-9Colored 15 Anatomic angulated abutment
1
MD-AN251-10Colored 25 Anatomic angulated abutment
1
MW-AN151-21Colored Wide 15 anatomic angulated abutment
1
MD-GT190Guide pin for technician set
6
MD-P2530-14Colored Esthetic 25 angulated abutment internal hex. 3mm
1
MW-CPK81-15Colored Anatomic 1mm transgingival abutment, h. 8mm, WP
1
MW-CPK82-16Colored Anatomic 2mm transgingival abutment, h. 8mm ,WP
1
MW-CPK83-17Colored Anatomic 3mm transgingival abutment, h. 8mm, WP
1
MW-CPK84-18Colored Anatomic 4mm transgingival abutment, h. 8mm, WP
1
MW-CTP10-19Colored Direct conical titanium post for WP
1
MW-MAC10-20Colored cementing post, WP
1
MW-P1510-22Colored Wide esthetic 15 angulated abutment int. hex.1
1
Packaging.MCU Control Unit
MWH-M0131(230V), MWH-M0132(115V)
138.
The MCU Control Unit is an intelligent drive unit for dental surgical applications, facilitating clean and simple operation. Exclusively designed and made by W&H, the control unit is a highly practical, user-friendly and easily portable device. It offers a maintenance-free surgical micro-motor, advanced programming features, wide speed range, accurate torque control, user-friendly foot control, clearly visible display, integrated coolant pump and more. CE approved and FDA cleared for marketing, the MCU Control Unit is manufactured according to ISO: 9001 requirements and complies with the most stringent safety requirements for medical equipment.
MCU Accessories.
MWH-M7559Surgical contra-angle 20:1
MWH-CAL59Surgical contra-angle LED 20:1
MWH-2STUBIrrigation system 1/2 way
GreenPump ON / OFF
OrangeChange program
YellowChange motor direction
GrayStart motor
The surgical micromotor features advanced functions such as: programing, working steps and low speed with high torque.
Exclusive design, highly practical and easily portable.
. Control Unit
. Foot Pedal
. Irrigation Support Rod
. Rubber Motor Support
. 3 Sterile Irrigation Tubes
. Power Cord (2m)
. MCU-MIS Control Unit User Manual
. Micromotor and Cord Kit
The MIS MCU core kit comes with:
Peformance is in line with modern clinical developments.
Outstanding simplicity. Clearly visible display panel and function buttons
Complies with the most stringent safety requirements for medical equipment. The MIS-MCU is approved by the CE, FDA and manufactured under ISO 9001:2008 regulations.
The motor features torque limitation for dental implantations (5-50 Ncm); wide speed range of 300-40,000 rpm; integrated coolant pump; maintenance-free.
Crown SetMK-0022
The MIS Crown Set is a resin based cement which combines high retention properties with the ability to remove a restoration if needed. Supplied in an auto-mix, easy-to-use dispensing syringe, the cement sets within 90 seconds and allows easy removal of access material.
Crown Set
MK-0022
140.
Abutments should be sandblasted prior to cementation to achieve maximum retention.
The Abutment Holding System enables the convenient grip of prosthetic componentsto allow simple and easy preparation of ceramic and titanium abutments. The kitincludes inserts for all MIS implants connections and platforms.
Abutment Holding System Kit
MK-0001
MK-0001Abutment Holding System Kit
The MIS Prosthetic Introduction Case offers a wide variety of MIS prosthetic options. The kit includes stone models representative of common clinical cases, the MIS Prosthetic Planning Kit; with a wide variety of cement retained prosthetic options for use on the models, the MIS Abutment Holding System Kit, and an instructional CD to guide you through the step-by-step prosthetic procedures recommended by MIS.
MK-PIC01Prosthetic Inroduction Case
MK-PIC01
Prosthetic Introduction Case
142.
Pcs: Pcs:
Kit Contents
MA-ANH17Multi-Unit 17 deg. angulated abutment with hex.
4
MA-ANH30Multi-unit 30 deg. angulated abutment with hex.
4
Pcs: Pcs:
MK-0001Abutment Holding System Kit
1
MK-0040Prosthetic Planning Kit
1
MK-CPK422mm Complete Prosthetic Kit, h. 4mm, SP
1
MM-CP045Multi-Unit plastic cylinder
12
MM-PBU10Plastic bar-ovoid
12
MM-TRU10Titanium rider-ovoid
1
MT-BK235Ball attachment anchor key
10
MD-A0010 Esthetic abutment internal hex. 1mm
1
MA-S1375Multi-Unit abutment 1mm
1
MA-S2375Multi-Unit abutment 2mm
5
MA-S3375Multi-Unit abutment 3mm
1
MA-S4375Multi-Unit abutment 4mm
1
MB-AN152Ball anchor 15 deg. angulated abutment
2
MB-N2375Ball attachment anchor 2mm
2
MD-CPK42Anatomic 2mm transgingival abutment, h. 4mm, SP
1
MD-A1510Esthetic 15 angulated abutment internal hex. 1mm
1
MD-CP013Direct plastic cyl. without hex.
2
MD-CPH13Direct plastic cylinder with hex.
1
MW-AN151-21Colored Wide 15 anatomic angulated abutment
1
MD-MAC10Standard cementing post
1
ME-G001Max - Bridge & Crown screw retained + Angulated
1
ME-G003Max - Ball attachment - Angulated & strait abutment
1
ME-G004Mandible - Dolderbar over Multi-Unit abutment
1
ME-G005Full Maxilla
1
ME-G006Colored Wide esthetic 15 angulated abutment int. hex.1
1
ME-G007Full Mandible
6
MG-K001
MGUIDE Set for SEVEN Implant Procedure
144.
The MGUIDE Set for SEVEN implants is designed for use with the MGUIDE MORE surgical guides. The computer-based planning procedure enhances accuracy and safety for a smoother implant placement procedure. The drills are designed with built-in stoppers to allow correct preparation to the planned depth and position. The ergonomic drill layout provides an easy to follow preparatory guideline for either hard or soft bone conditions.
MGUIDE MORE Drill Set for SEVEN implant procedure
MGUIDE MORE Tool Kit for internal hex.
MGUIDE Drill Kit for SEVEN Implant Procedure
146.
1 3
2 4
6
7
8
9
10
15
20
25
21
22
23
24
16
17
18
19
11
12
13
14
5
26
27
28
29
30
Kit Contents
MGUIDE Drill Kit for SEVEN implant procedure
MG-D0624Guided pilot drill Ø2.40 L6mm
5
6
7
8
9
MG-TP047Guided tissue punch Ø4.7mm
1
2
3
4
MG-BM047Guided bone mill Ø4.7mm
MG-BM055Guided bone mill Ø5.5mm
MG-TP055Guided tissue punch Ø5.5mm
MG-D1033Guided conical drill for implant Ø3.30 L10mm
MG-D0633Guided conical drill for implant Ø3.30 L6mm
10
11
12
MG-D1337Guided conical drill for implant Ø3.75 L13mm
MG-D0642Guided conical drill for implant Ø4.20 L6mm
20
21
22
23
25
MG-D1133Guided conical drill for implant Ø3.30 L11.5mm
MG-D0833Guided conical drill for implant Ø3.30 L8mm
MG-D1333Guided conical drill for implant Ø3.30 L13mm
MG-D0637Guided conical drill for implant Ø3.75 L6mm
15
16
17
18
19
MG-D0837Guided conical drill for implant Ø3.75 L8mm
MG-D1037Guided conical drill for implant Ø3.75 L10mm
MG-D1137Guided conical drill for implant Ø3.75 L11.5mm
MG-D0824Guided pilot drill Ø2.40 L8mm
MG-D1024Guided pilot drill Ø2.40 L10mm
MG-D1124Guided pilot drill Ø2.40 L11.5mm
MG-D1324Guided pilot drill Ø2.40 L13mm
MG-D0842Guided conical drill for implant Ø4.20 L8mm
MG-D1042Guided conical drill for implant Ø4.20 L10mm
MG-D1142Guided conical drill for implant Ø4.20 L11.5mm
MG-D1342Guided conical drill for implant Ø4.20 L13mm
MG-D0650Guided conical drill for implant Ø5 L6mm
25
26
27
28
29
MG-D0850Guided conical drill for implant Ø5 L8mm
MG-D1050Guided conical drill for implant Ø5 L10mm
MG-D1150Guided conical drill for implant Ø5 L11.5mm
MG-D1350Guided conical drill for implant Ø5 L13mm
MG-DLG55Guided drill length gauge dia. 5.5mm
30
13
14
MGUIDE Tools Kit for Internal Hex.
148.
NP
NP
SPARE
MO
TOR INSERT. T
OO
L
DIR
ECT INSERT. T
OO
LS
EXTRACTORS
RATCHET INSERT. T
OO
L
HA
N
D SCREW DRIVE
R
34
FIXATION DRILL ø2
FIXATION & ANCHORING TOOLS
FIXATION PINS TEMPLATE ANCHORING SCREWS
INTERNAL HEXAGONTOOLS
9
1
5
6
4
{{
{10 11
2
3
87
Kit Contents
MGUIDE tools kit for int. hex.
MG-FP020MGUIDE fixation pin, Ø2mm
10
MT-TDN20Pilot drill 2mm external irrigation
9
MG-TAS55MGUIDE template anchoring screw, Ø5.5mm
11
MT-HHR13Long hand screwdriver for 0.05" hex.
5
MG-GRI10Guided ratchet insertion tool, int. hex.
4
MG-GRN01Guided direct ratchet insertion tool, int. hex., NP
2
MG-GRI01Guided direct ratchet insertion tool, int. hex.
1
MG-GMI10Guided motor insertion tool, int. hex.
3
MT-RI030Ratchet wrench
8
MG-IE172Guided insertion tool extractor, int. hex.
6
MG-IE160Guided insertion tool extractor, int. hex., NP
7
150.
Flexibility is a key feature of the MIS expanded 4BONE® product range.
The name 4BONE represents an entire family of quality regenerative
biomaterial solutions consisting of bovine, porcine and synthetic based
products that offer solutions for a wide range of bone regeneration
procedures.
Bone Augmentation Materials.
CE approval for marketing is pending
0.5cc - 2.5cc
4BONE BCH is a fully synthetic bioactive bone substitute composed of chemical synthesis of 60% HA and 40% ß-TCP. It is recommended for use as a bone augmentation material in dental implant procedures.
4BONE® BCH - Synthetic Bone Substitute
BS-4BS01 BCH syringe 0.5cc, granule size: 0.5-1mm
BS-4BS1S BCH tube 1cc, granule size: 0.5-1mm
BS-4BS25 BCH tube 2.5cc, granule size: 1-2mm
BCH
New packaging available in 2014
®
BONDBONE® is an innovative synthetic bone grafting material composed of biphasic calcium sulfate. Due to it novel engineering process, BONDBONE has excellent handling properties. The initial pliable paste is fast setting and is not affected by the presence of blood and saliva.
154.
BONDBONE® - Bonding Graft Material
BS-BB005 BONDBONE® 0.5cc, 3 drivers
BS-BB010 BONDBONE® 1cc, 3 drivers
New packaging available in 2014
0.5cc - 1cc0.5cc - 1cc
4BONE RCB Conforming Barrier Membrane is engineered from highly purified Type I bovine collagen. 4BONE RCB is a fully resorbable and adaptable cell occlusive barrier used in guided bone regeneration procedures in the area of dental implants, bone defects and ridge augmentations.
4BONE® RCB - Resorbable Conforming Barrier Membrane
4B-C1520 RCB - 15X20mm
4B-C2030 RCB - 20X30mm
4B-C3040 RCB - 30X40mm
B
RCB®
4BONE RSB is a bioresorbable, cell occlusive membrane engineered from highly purified bovine collagen. It is indicated for use as a barrier membrane in guided tissue regeneration and guided bone regeneration procedures in the area of dental implants, bone defects and ridge augmentations.
156.
4BONE® RSB - Resorbable Collagen Barrier Membrane
RSB
4B-S1520 RSB - 15X20mm
4B-S2030 RSB - 20X30mm
®
4B-S3040 RSB - 30X40mm
4BONE RCB Conforming Barrier Membrane is engineered from highly purified Type I bovine collagen. 4BONE RCB is a fully resorbable and adaptable cell occlusive barrier used in guided bone regeneration procedures in the area of dental implants, bone defects and ridge augmentations.
4BONE® RCM - Resorbable Collagen Membrane
BR-C1525 RCM - 15X25mm
BR-C2030 RCM - 20X30mm
BR-C3040 RCM - 30X40mm
Resorbable Collagen Membrane
FDA clearance for marketing pending
®
4BONE TAPE is used following oral surgical procedures to aid in wound healing. The Tape is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.
158.
4BONE® TAPE - Resorbable Collagen Wound Dressing
TAPE
4B-T0010 TAPE 10/box., Size: 2.5cm x 7.5cm, 1mm thick
®
4BONE PLUG is used following oral surgical procedures to aid in wound healing. The plug is engineered from highly purified cross-linked Type I bovine collagen with an optimal structure and thickness to allow the absorption of both fluid and blood at the defect site.
4B-P0010 PLUG 10/box.
Size: 1cm x 2cm
4BONE® PLUG - Resorbable Collagen Wound Dressing
PLUG ®
160.160.
Appendix.
162.
Legend: C–bonding K–resin L–soldering G–casting onto
Alloy Compositions
Application C, K L, G, K L, G, K L, K
Balance
Balance
0.08
0.013
Balance
Gold-eMaterialTitanium Alloy Ti 6Al 4V ELI Gold-a Gold-s
Composition
Hardness
162.
5.5-6.5
Restorative Components
*Recommendation only
Location
Abutment description
Esthetic angulated abutment
15° or 25°
Up to 4mm buccal Up to 6mm palatal
Standard post abutment
Adjustable, based on abutment preparation
Friction fit post platform switching
Adjustable, based on abutment preparation
Esthetic abutment
Up to 2mm buccal Up to 6mm lingual/palatal
Anatomic transgingival abutment
According to gingival height available in heights of 1,2,3,4mm
Esthetic angulated abutment
15° or 25°
Up to 2mm buccal Up to 4mm palatal
Crown/ Implant
Inclination Ratio
Gingival Height
Anterior Maxilla
Conical post abutment
Adjustable, based on abutment preparation
Anterior Mandible
Up to 2.5°
Angulated abutment
Up to 2mm buccalUp to 4mm lingual
Canine, Premolars and MolarsPremolars and Molars
MD-P1530MD-P2530
MD-MAC10MD-WMAC1
MD-MACF1MD-A0010MD-P0030
MD-CPK41MD-CPK42MD-CPK43MD-CPK44MD-CPK61MD-CPK62
MD-CPK63MD-CPK64MD-CPK81MD-CPK82MD-CPK83MD-CPK84
MD-A1510MD-A2510
Catalog Number
MD-CTP10 MD-AN151MD-AN251
MD-GPC10
MD-GP010
Screw-retained gold-plastic abutment
Up to 2mm
Up to 3.5° Up to 4° 15° or 25°
Guidelines for usage ofMIS Restorative Components
Implant platform(Standard/Wide/Narrow/
and One Piece)
Implant diameter (mm)
Implant length (mm)
Diameter and Platform Color Coding
Tube cap is marked with a distinctive colored label that indicates the diameter, length and platform of the implant.
164.
Implant diameter and platform indicationTube cap is marked with a distinctive colored label that indicates the diameter, length and platform of the implant.
Color codes:
Narrow platform
Standard platform
Wide platform
Naming and labeling explanations
Date of manufactureUse-by date
Lot no.Qty.
Catalog no.
Barcode
Type of implant & connection
Label Description
Three labels are included between the inner and outer tubes. Labels specify product catalog number, lot number and use-by date.
CE mark
Catalog no.
Type of implant & connection
Lot no.
Use-by date
Date of manufacture
Implant diameter & length
Manufacturer
Sterilized using gamma irradiation
European conformity mark
Catalog number
Batch code
Sale by or on the order of a licensed dentist
Do not use if package is damaged
non-sterile
Date of manufacture
Attention, see instructions for use
Do Not Resterilize
Use-by date
Upper limit of temp.
Temp. limitation
Single use
166.
Only
20%
90%
80%
50%
MIS ManualsSymbol Index
Index.
WP EXTERNAL
PERIOPATCH
UNO
MGUIDEEXTRAANTI ROTATION
BODY TRY
Guide
SQUARE
4BONE Guide
168.
Size
UNOANTI ROTATION
Size Cat. No. Page
INDEX.Alphabetic Order
Abrahami drill guide kit MK-0011 60Angulated abutment 20 degree internal hex. NP 6mm MN-AN020 77Angulated abutment 25 degree internal hex. 10.50mm MD-AN251 92Angulated abutment 15 degree, internal hex. 11mm MD-AN151 92Abutment analog crown height 6mm, NP MN-RSM60 74Abutment holding system kit MK-0001 141/143Allen key 0.05 72mm MT-AL005 132Anatomic 1mm transgingival abutment, h. 6mm NP 6mm MN-CPK61 74Anatomic 1mm transgingival abutment, h. 6mm SP MD-CPK61 88Anatomic 2mm transgingival abutment, h. 4mm SP MD-CPK42 143
Ball anchor 15deg. angulated abutment 10mm MB-AN152 105/143Ball anchor 25deg. angulated abutment 10mm MB-AN252 105Ball attachment analog internal hex. 15.1mm MB-RS375 84/105/126Ball attachment anchor internal hex. 1mm 1mm MB-N1375 105Ball attachment anchor internal hex. 2mm 2mm MB-N2375 105/143Ball attachment anchor internal hex. 2mm. NP 2mm MB-N2330 84Ball attachment anchor internal hex. 3mm 3mm MB-N3375 105Ball attachment anchor internal hex. 3mm. NP 3mm MB-N3330 84Ball attachment anchor internal hex. 4mm 4mm MB-N4375 105Ball attachment anchor internal hex. 4mm. NP 4mm MB-N4330 84Ball attachment anchor internal hex. 5mm 5mm MB-N5375 105Ball attachment anchor key 22mm MT-BK235 67/143Body try in 2.40mm for tapered impl. procedure MT-BTT24 53/65Body try in 2.80mm for tapered impl. procedure MT-BTT28 53Body try in 2mm for tapered impl. procedure MT-BTT20 65Body try in 3.20mm for tapered impl. procedure MT-BTT32 53Body try in 3mm for tapered impl. procedure MT-BTT30 65Body try in 4.50mm for tapered impl. procedure MT-BTT45 53Body try in 4mm for tapered impl. procedure MT-BTT40 53Body try in 5mm for tapered impl. procedure MT-BTT50 53Bone compression kit MK-0020 62/63Bone harvest drill dia. 2.80mm 2.80mm MT-BC280 57Bone harvest drill dia. 3.20mm 3.20mm MT-BC320 57Bone harvest drill dia. 3.80mm 3.80mm MT-BC380 57Bone harvest drill dia. 4.50mm 4.50mm MT-BC450 57Bridge only Ti base int. hex connection, NP MN-TB002 79Bridge only Ti base int. hex connection, SP MD-TB002 95Burn out plastic cap MD-IC040 88Burn out plastic cap MW-IC040 112Burn out plastic cap, NP 6mm MN-IC040 74Burn out anti rotation plastic cap MW-ICH40 112Burn out anti rotation plastic cap MD-ICH40 88
5A
B
170.
Size
INDEX.Alphabetic Order
Cat. No. Page
Burn out anti rotation plastic cap for Ti base, SP GI-SCH11 78/79/94/95Burn out anti rotation plastic cap for Ti base, WP GI-WCH11 118/119Burn out anti rotation plastic cap, NP 6mm MN-ICH40 74
BONE AUGMENTATION MATERIALS4BONE synthetic bone substitute 0.5cc BS-4BS01 1504BONE XBM Xenograft 0.25-1mm granules , 2.5cc 4B-X2525 1524BONE XBM Xenograft 0.25-1mm granules , 4cc 4B-X2540 1524BONE XBM Xenograft 0.25-1mm granules, 0.5cc 4B-X2505 1524BONE XBM Xenograft 0.25-1mm granules, 1cc 4B-X2510 1524BONE XBM Xenograft 1-2mm granules, 1cc 4B-X1010 1524BONE XBM Xenograft 1-2mm granules, 2.5cc 4B-X1025 152
Ceramic marking drill 28.50mm MT-CRD21 43Ceramic pilot drill 33.50mm MT-CRD20 43Ceramic twist drill 35mm MT-CRD28 43Closed tray impression coping key 16.5mm MT-IT100 67/132Colored cementing post WP MW-MAC10-20 137Colored Direct conical titanium post for WP MW-CTP10-19 137Colored Esthetic 15 angulated abutment internal hex. 1mm MD-A1510-11 137Colored Esthetic 15 angulated abutment internal hex. 3mm MD-P1530-13 137Colored Esthetic 25 angulated abutment internal hex. 1mm MD-A2510-12 137Colored Esthetic 25 angulated abutment internal hex. 3mm MD-P2530-14 137Colored Esthetic abutment internal hex. 1mm MD-A0010-8 137Colored Esthetic abutment internal hex. 3mm MD-P0030-7 137Colored Narrow cementing post MD-CTP10-5 137Colored Standard cementing post MD-MAC10-6 137Colored Wide 15 anatomic angulated abutment MW-AN151-21 137/143Colored Wide esthetic 15 angulated abutment int. hex.1 MW-P1510-22 137Colored 15 Anatomic angulated abutment MD-AN151-9 137Colored 25 Anatomic angulated abutment MD-AN251-10 137Colored Anatomic 1mm transgingival abutment, h. 8mm SP MD-CPK81-1 137Colored Anatomic 1mm transgingival abutment, h. 8mm WP MW-CPK81-15 137Colored Anatomic 2mm transgingival abutment, h. 8mm SP MD-CPK82-2 137Colored Anatomic 2mm transgingival abutment, h. 8mm WP MW-CPK82-16 137Colored Anatomic 3mm transgingival abutment, h. 8mm SP MD-CPK83-3 137Colored Anatomic 3mm transgingival abutment, h. 8mm WP MW-CPK83-17 137Colored Anatomic 4mm transgingival abutment, h. 8mm SP MD-CPK84-4 137Colored Anatomic 4mm transgingival abutment, h. 8mm WP MW-CPK84-18 137Complete prosthetic kit 4mm, crown height 4mm, SP MK-CPK44 89Complete prosthetic kit 4mm, crown height 4mm, WP MK-WPK44 113Complete prosthetic kit 4mm, crown height 6mm, SP MK-CPK64 89Complete prosthetic kit 4mm, crown height 6mm, WP MK-WPK64 113
C
170.
INDEX.Alphabetic Order
Size PageCat. No.
Burn out anti rotation plastic cap for Ti base, SP GI-SCH11 78/79/94/95Burn out anti rotation plastic cap for Ti base, WP GI-WCH11 118/119Burn out anti rotation plastic cap, NP 6mm MN-ICH40 74
BONE AUGMENTATION MATERIALS4BONE synthetic bone substitute 0.5cc BS-4BS01 1504BONE XBM Xenograft 0.25-1mm granules , 2.5cc 4B-X2525 1524BONE XBM Xenograft 0.25-1mm granules , 4cc 4B-X2540 1524BONE XBM Xenograft 0.25-1mm granules, 0.5cc 4B-X2505 1524BONE XBM Xenograft 0.25-1mm granules, 1cc 4B-X2510 1524BONE XBM Xenograft 1-2mm granules, 1cc 4B-X1010 1524BONE XBM Xenograft 1-2mm granules, 2.5cc 4B-X1025 152
Ceramic marking drill 28.50mm MT-CRD21 43Ceramic pilot drill 33.50mm MT-CRD20 43Ceramic twist drill 35mm MT-CRD28 43Closed tray impression coping key 16.5mm MT-IT100 67/132Colored cementing post WP MW-MAC10-20 137Colored Direct conical titanium post for WP MW-CTP10-19 137Colored Esthetic 15 angulated abutment internal hex. 1mm MD-A1510-11 137Colored Esthetic 15 angulated abutment internal hex. 3mm MD-P1530-13 137Colored Esthetic 25 angulated abutment internal hex. 1mm MD-A2510-12 137Colored Esthetic 25 angulated abutment internal hex. 3mm MD-P2530-14 137Colored Esthetic abutment internal hex. 1mm MD-A0010-8 137Colored Esthetic abutment internal hex. 3mm MD-P0030-7 137Colored Narrow cementing post MD-CTP10-5 137Colored Standard cementing post MD-MAC10-6 137Colored Wide 15 anatomic angulated abutment MW-AN151-21 137/143Colored Wide esthetic 15 angulated abutment int. hex.1 MW-P1510-22 137Colored 15 Anatomic angulated abutment MD-AN151-9 137Colored 25 Anatomic angulated abutment MD-AN251-10 137Colored Anatomic 1mm transgingival abutment, h. 8mm SP MD-CPK81-1 137Colored Anatomic 1mm transgingival abutment, h. 8mm WP MW-CPK81-15 137Colored Anatomic 2mm transgingival abutment, h. 8mm SP MD-CPK82-2 137Colored Anatomic 2mm transgingival abutment, h. 8mm WP MW-CPK82-16 137Colored Anatomic 3mm transgingival abutment, h. 8mm SP MD-CPK83-3 137Colored Anatomic 3mm transgingival abutment, h. 8mm WP MW-CPK83-17 137Colored Anatomic 4mm transgingival abutment, h. 8mm SP MD-CPK84-4 137Colored Anatomic 4mm transgingival abutment, h. 8mm WP MW-CPK84-18 137Complete prosthetic kit 4mm, crown height 4mm, SP MK-CPK44 89Complete prosthetic kit 4mm, crown height 4mm, WP MK-WPK44 113Complete prosthetic kit 4mm, crown height 6mm, SP MK-CPK64 89Complete prosthetic kit 4mm, crown height 6mm, WP MK-WPK64 113
C
Complete prosthetic kit 4mm, crown height 8mm, SP MK-CPK84 89Complete prosthetic kit 4mm, crown height 8mm, WP MK-WPK84 113Complete prosthetic kit 3mm, crown height 4mm, SP MK-CPK43 89Complete prosthetic kit 3mm, crown height 4mm, WP MK-WPK43 113Complete prosthetic kit 3mm, crown height 6mm, SP MK-CPK63 89Complete prosthetic kit 3mm, crown height 6mm, WP MK-WPK63 113Complete prosthetic kit 3mm, crown height 8mm, SP MK-CPK83 89Complete prosthetic kit 3mm, crown height 8mm, WP MK-WPK83 113Complete prosthetic kit, crown height 4mm, SP MK-CPK42 89/143Complete prosthetic kit 2mm, crown height 4mm, WP MK-WPK42 113Complete prosthetic kit 2mm, crown height 6mm, SP MK-CPK62 89Complete prosthetic kit 2mm, crown height 6mm, WP MK-WPK62 113Complete prosthetic kit 2mm, crown height 8mm, SP MK-CPK82 89Complete prosthetic kit 2mm, crown height 8mm, WP MK-WPK82 113Complete prosthetic kit 1mm, crown height 4mm, SP MK-CPK41 89Complete prosthetic kit 1mm, crown height 4mm, WP MK-WPK41 113Complete prosthetic kit 1mm, crown height 6mm, SP MK-CPK61 88/89Complete prosthetic kit 1mm, crown height 6mm, WP MK-WPK61 112/113Complete prosthetic kit 1mm, crown height 8mm, SP MK-CPK81 89Complete prosthetic kit 1mm, crown height 8mm, WP MK-WPK81 113Concave sinus screw 3.50mm MO-SO350 63Concave sinus screw 3mm MO-SO300 63Concave sinus screw 4mm MO-SO400 63Convex bajonet osteotome with stopper dia. 2mm MO-CBS20 50Convex bajonet osteotome with stopper dia. 3.25mm MO-CBS32 50Convex bajonet osteotome with stopper dia. 3mm MO-CBS30 50Convex bajonet osteotome with stopper dia. 4mm MO-CBS40 50Convex compress screw MO-CO160 50/63Convex compress screw MO-CO200 63Convex compress screw MO-CO240 63Convex compress screw MO-CO280 63Convex osteotome with stopper dia. 2mm MO-CS200 50Convex osteotome with stopper dia. 3.25mm MO-CS325 50Convex osteotome with stopper dia. 3mm MO-CS300 50Convex osteotome with stopper dia. 4mm MO-CS400 50Convex osteotomes set MK-0024 69Countersink for NP MT-CSN33 42/50/55/56Countersink for standard platform 26mm MT-GDN33 42/50/53/55/56Countersink for wide platform 26.80mm MT-GDN50 32/42/50/53/55/56Crown set MK-0022 140Custom premolar abutment set int. hex. connection, SP MK-SPZ4 100/101Custom premolar abutment set int. hex. connection, WP MK-WPZ4 122/123
Size
Diamond burr 1.80mm MT-B4018 135Diamond burr 2.10mm MT-F2121 135Diamond burr 2.20mm MT-A4022 135Diamond burr 2.30mm MT-K2023 135Diamond burr 2.50mm MT-C3125 135Direct conical titanium post for WP 10.50mm MW-CTP10 115Direct gold abutment without hex. WP 18.20mm MW-GP010 114Direct gold plastic cylinder with hex. int. hex., NP MN-GPC10 76Direct gold plastic cylinder with hex. internal hex. 16.20mm MD-GPC10 90Direct gold plastic cylinder without hex. int. hex., NP MN-GP010 76Direct gold plastic cylinder without hex. internal hex. 18.20mm MD-GP010 90Direct gold prosthetic screw internal hex. 7.70mm / 20 MD-G0220 90/92/114/116Direct impression coping for closed tray MN-IT100 73Direct impression coping for closed tray int. hex. WP MW-IT300 110/111Direct impression coping for closed tray internal hex. 11mm MD-IT100 87Direct impression coping for closed tray internal hex. MD-IT300 87Direct impression coping for open tray internal hex. 13mm MD-I0375 87Direct impression coping for open tray internal hex. NP 13mm MN-I0330 73Direct impression coping guide pin internal hex. MN-G0160 73Direct impression coping guide pin internal hex. 16.5mm MD-GP100 87/111Direct impression coping guide pin internal hex. 21.30mm MD-G0213 87/111Direct impression coping guide pin internal hex. NP MN-GP100 73Direct Impression coping h. 8mm, WP 8mm MW-IC800 112Direct Impression coping plastic cap, NP MN-IC600 74Direct impression coping Set for closed tray NP MN-IT300 73Direct Impression coping, h. 8mm, SP MD-IC800 88Direct plastic cylinder int. Hex. with hex. NP MN-CPH13 76Direct plastic cylinder int. Hex. without hex. NP MN-CP013 76Direct plastic cylinder internal hex. with hex. 11mm MD-CPH13 90/143Direct plastic cylinder with hex. Dia.6mm WP 13mm MW-CPH60 114Direct plastic cylinder without hex. Dia. 6mm, WP 13mm MW-CP060 114Direct plastic cylinder without hex. internal hex. 11mm MD-CP013 90/143Direct press fit for closed tray NP MN-PF330 73Direct press fit for closed tray WP 13mm MW-PF550 111Direct prosthetic screw Int. hex. NP 6mm MN-S0160 72/76/77/78/79/8Direct prosthetic screw internal hex. 7.60mm / 30 MD-S0220 50/72/90/92/94/95/98Direct temporary cylinder with hex. internal hex. 11mm MD-TCH13 90Direct temporary plastic cylinder internal hex. 12mm MD-TPH50 90Double metal housing 2.4mm MB-DMH10 84/106/127Drill extender 28.70mm MT-DE001 45/53/55Drill stopper kit for 10mm length Seven implant procedure MK-SDS10 59Drill stopper kit for 11.5mm length Seven implant procedure MK-SDS11 59Drill stopper kit for 13mm length Seven implant procedure MK-SDS13 59Drill stopper kit for 6mm length Seven implant procedure MK-SDS06 59Drill stopper kit for 8mm length Seven implant procedure MK-SDS08 59Drill stopper kit for Seven implant, SP MK-BS001 58
D
172.
INDEX.Alphabetic Order
Cat. No. Page
Size
Diamond burr 1.80mm MT-B4018 135Diamond burr 2.10mm MT-F2121 135Diamond burr 2.20mm MT-A4022 135Diamond burr 2.30mm MT-K2023 135Diamond burr 2.50mm MT-C3125 135Direct conical titanium post for WP 10.50mm MW-CTP10 115Direct gold abutment without hex. WP 18.20mm MW-GP010 114Direct gold plastic cylinder with hex. int. hex., NP MN-GPC10 76Direct gold plastic cylinder with hex. internal hex. 16.20mm MD-GPC10 90Direct gold plastic cylinder without hex. int. hex., NP MN-GP010 76Direct gold plastic cylinder without hex. internal hex. 18.20mm MD-GP010 90Direct gold prosthetic screw internal hex. 7.70mm / 20 MD-G0220 90/92/114/116Direct impression coping for closed tray MN-IT100 73Direct impression coping for closed tray int. hex. WP MW-IT300 110/111Direct impression coping for closed tray internal hex. 11mm MD-IT100 87Direct impression coping for closed tray internal hex. MD-IT300 87Direct impression coping for open tray internal hex. 13mm MD-I0375 87Direct impression coping for open tray internal hex. NP 13mm MN-I0330 73Direct impression coping guide pin internal hex. MN-G0160 73Direct impression coping guide pin internal hex. 16.5mm MD-GP100 87/111Direct impression coping guide pin internal hex. 21.30mm MD-G0213 87/111Direct impression coping guide pin internal hex. NP MN-GP100 73Direct Impression coping h. 8mm, WP 8mm MW-IC800 112Direct Impression coping plastic cap, NP MN-IC600 74Direct impression coping Set for closed tray NP MN-IT300 73Direct Impression coping, h. 8mm, SP MD-IC800 88Direct plastic cylinder int. Hex. with hex. NP MN-CPH13 76Direct plastic cylinder int. Hex. without hex. NP MN-CP013 76Direct plastic cylinder internal hex. with hex. 11mm MD-CPH13 90/143Direct plastic cylinder with hex. Dia.6mm WP 13mm MW-CPH60 114Direct plastic cylinder without hex. Dia. 6mm, WP 13mm MW-CP060 114Direct plastic cylinder without hex. internal hex. 11mm MD-CP013 90/143Direct press fit for closed tray NP MN-PF330 73Direct press fit for closed tray WP 13mm MW-PF550 111Direct prosthetic screw Int. hex. NP 6mm MN-S0160 72/76/77/78/79/8Direct prosthetic screw internal hex. 7.60mm / 30 MD-S0220 50/72/90/92/94/95/98Direct temporary cylinder with hex. internal hex. 11mm MD-TCH13 90Direct temporary plastic cylinder internal hex. 12mm MD-TPH50 90Double metal housing 2.4mm MB-DMH10 84/106/127Drill extender 28.70mm MT-DE001 45/53/55Drill stopper kit for 10mm length Seven implant procedure MK-SDS10 59Drill stopper kit for 11.5mm length Seven implant procedure MK-SDS11 59Drill stopper kit for 13mm length Seven implant procedure MK-SDS13 59Drill stopper kit for 6mm length Seven implant procedure MK-SDS06 59Drill stopper kit for 8mm length Seven implant procedure MK-SDS08 59Drill stopper kit for Seven implant, SP MK-BS001 58
DEsthetic 15 angulated abutment internal hex. 1mm 11.10mm MD-A1510 92/143Esthetic 15 angulated abutment internal hex. 3mm 13.10mm MD-P1530 92Esthetic 25 angulated abutment internal hex. 1mm 11.10mm MD-A2510 92Esthetic 25 angulated abutment internal hex. 3mm 13.10mm MD-P2530 92Esthetic abutment internal hex. 1mm 11mm MD-A0010 91/143Esthetic abutment internal hex. 3mm 13mm MD-P0030 91
Friction fit cementing post platform switching, SP 13mm MD-MACF1 91
Gingival depth measuring 2/4/6/8 mm MT-GDM01 131/134Gold ball cap 2.4mm MB-GPS10 84/106/127Gold bar-ovoid 50mm MM-GBU10 130Gold bar-round 50mm MM-GB100 130Gold rider-ovoid 50mm MM-GRU10 130Gold rider-round 2.5mm MM-TC100 130Guide pin for technician set MD-GT190 137Guided bone mill dia. 5.5mm MG-BM055 147Guided bone mill dia.4.7mm MG-BM047 147Guided conical drill for imp. dia.3.30 L 10mm MG-D1033 147Guided conical drill for imp. dia.3.30 L 11.50mm MG-D1133 147Guided conical drill for imp. dia.3.30 L 13mm MG-D1333 147Guided conical drill for imp. dia.3.30 L 6mm MG-D0633 147Guided conical drill for imp. dia.3.30 L 8mm MG-D0833 147Guided conical drill for imp. dia.3.75 L 10mm MG-D1037 147Guided conical drill for imp. dia.3.75 L 6mm MG-D0637 147Guided conical drill for imp. dia.3.75 L 8mm MG-D0837 147Guided conical drill for imp. dia.4.20 L 10mm MG-D1042 147Guided conical drill for imp. dia.4.20 L 11.50mm MG-D1142 147Guided conical drill for imp. dia.4.20 L 13mm MG-D1342 147Guided conical drill for imp. dia.4.20 L 6mm MG-D0642 147Guided conical drill for imp. dia.4.20 L 8mm MG-D0842 147Guided conical drill for imp. dia.5 L 10mm MG-D1050 147Guided conical drill for imp. dia.5 L 11.50mm MG-D1150 147Guided conical drill for imp. dia.5 L 13mm MG-D1350 147Guided conical drill for imp. dia.5 L 6mm MG-D0650 147Guided conical drill for imp. dia.5 L 8mm MG-D0850 147
EFG
Cat. No. Page
Guided direct ratchet insertion tool, int. hex. MG-GRI01 149Guided direct ratchet insertion tool, int. hex., NP MG-GRN01 149Guided Drill Length Gauge dia. 5.5mm MG-DLG55 147Guided insertion tool extractor, int. hex MG-IE172 149Guided insertion tool extractor, int. hex, NP MG-IE160 149Guided motor insertion tool, int. hex. connection MG-GMI10 149Guided pilot drill dia.2.40 L 10mm MG-D1024 147Guided pilot drill dia.2.40 L 11.50mm MG-D1124 147Guided pilot drill dia.2.40 L 13mm MG-D1324 147Guided pilot drill dia.2.40 L 6mm MG-D0624 147Guided pilot drill dia.2.40 L 8mm MG-D0824 147Guided ratchet insertion tool, int. hex. connection MG-GRI10 149Guided tissue punch dia. 4.7mm MG-TP047 147Guided tissue punch dia. 5.5mm MG-TP055 147
Hand wrench 10mm MT-HW001 45Hand wrench square connection MT-SHA10 8/10/13/16/18/45/46Hex. ratchet long adapter for int. hex. connection 22mm MT-MRH20 45Hex. ratchet long adapter for int. hex. connection MT-MRH25 55Hex. ratchet long adapter for int. hex. connection, NP MT-NRH20 8/16/45/53Hex. ratchet short adapter for int. hex. connection 16mm MT-MRH10 45
Implant analog internal hex. 12mm MD-RSM10 72/87/94/95Implant analog internal hex. NP MN-RSM10 72/73/78/79Implant Direction Indicator 15mm MT-DI001 46/53/67Implant site depth probe 8/10/11.5/13/16mm 100mm MT-BTI10 48Impression coping for closed tray internal hex. WP 11mm MW-IT100 111Impression coping for open tray internal hex. WP 13mm MW-I0470 111Int. connection abutment extractor 27mm MT-IE172 67/133Int. connection abutment extractor, NP MT-IE160 133Int. hex. implant analog for universal hand driver MT-US002 67/134Int. hex. implant analog NP for universal hand driver MT-UN002 134
Locator standard abutment, 5mm 5mm MB-SZL05 108Locator wide abutment, 5mm 5nm MB-WZL05 128Locator standard abutment, 6mm 6mm MB-SZL06 108Locator wide abutment, 6mm 6nm MB-WZL06 128Locator standard abutment, 4mm 4mm MB-SZL04 108Locator wide abutment, 4mm 4nm MB-WZL04 128
HI
L
174.
INDEX.Alphabetic Order
Cat. No. Page
Size
Guided direct ratchet insertion tool, int. hex. MG-GRI01 149Guided direct ratchet insertion tool, int. hex., NP MG-GRN01 149Guided Drill Length Gauge dia. 5.5mm MG-DLG55 147Guided insertion tool extractor, int. hex MG-IE172 149Guided insertion tool extractor, int. hex, NP MG-IE160 149Guided motor insertion tool, int. hex. connection MG-GMI10 149Guided pilot drill dia.2.40 L 10mm MG-D1024 147Guided pilot drill dia.2.40 L 11.50mm MG-D1124 147Guided pilot drill dia.2.40 L 13mm MG-D1324 147Guided pilot drill dia.2.40 L 6mm MG-D0624 147Guided pilot drill dia.2.40 L 8mm MG-D0824 147Guided ratchet insertion tool, int. hex. connection MG-GRI10 149Guided tissue punch dia. 4.7mm MG-TP047 147Guided tissue punch dia. 5.5mm MG-TP055 147
Hand wrench 10mm MT-HW001 45Hand wrench square connection MT-SHA10 8/10/13/16/18/45/46Hex. ratchet long adapter for int. hex. connection 22mm MT-MRH20 45Hex. ratchet long adapter for int. hex. connection MT-MRH25 55Hex. ratchet long adapter for int. hex. connection, NP MT-NRH20 8/16/45/53Hex. ratchet short adapter for int. hex. connection 16mm MT-MRH10 45
Implant analog internal hex. 12mm MD-RSM10 72/87/94/95Implant analog internal hex. NP MN-RSM10 72/73/78/79Implant Direction Indicator 15mm MT-DI001 46/53/67Implant site depth probe 8/10/11.5/13/16mm 100mm MT-BTI10 48Impression coping for closed tray internal hex. WP 11mm MW-IT100 111Impression coping for open tray internal hex. WP 13mm MW-I0470 111Int. connection abutment extractor 27mm MT-IE172 67/133Int. connection abutment extractor, NP MT-IE160 133Int. hex. implant analog for universal hand driver MT-US002 67/134Int. hex. implant analog NP for universal hand driver MT-UN002 134
Locator standard abutment, 5mm 5mm MB-SZL05 108Locator wide abutment, 5mm 5nm MB-WZL05 128Locator standard abutment, 6mm 6mm MB-SZL06 108Locator wide abutment, 6mm 6nm MB-WZL06 128Locator standard abutment, 4mm 4mm MB-SZL04 108Locator wide abutment, 4mm 4nm MB-WZL04 128
HI
Locator standard abutment, 3mm 3mm MB-SZL03 108Locator wide abutment, 3mm 3nm MB-WZL03 128Locator standard abutment, 2mm 2mm MB-SZL02 108Locator wide abutment, 2mm 2nm MB-WZL02 128Locator standard abutment, 0mm 0mm MB-SZL00 108Locator wide abutment, 0mm 0nm MB-WZL00 128Locator standard abutment, 1mm 1mm MB-SZL01 108Locator wide abutment, 1mm 1nm MB-WZL01 128Locator abutment 0mm hgt, NP abutment MB-NZL00 85Locator abutment 1.0mm hgt, NP MB-NZL01 85Locator abutment 2.0mm hgt, NP MB-NZL02 85Locator abutment 3.0mm hgt, NP MB-NZL03 85Locator abutment 4.0mm hgt, NP MB-NZL04 85Locator abutment 5.0mm hgt, NP MB-NZL05 85Locator abutment 6.0mm hgt, NP MB-NZL06 85Locator black processing replacement male (4 Pack) 1.80mm MM-LBP10 86/109/129Locator core tool MM-LCT10 67/85/108Locator extended range replacement male green (4 Pack) 1.80mm MM-LER10 86/109/129Locator extra light extended range male red (4 Pack) 1.80mm MM-LELE1 86/109/129Locator extra light retention (4 Pack) 1.80mm MM-LEL10 86/109/129Locator female analog 4mm dia. (4 Pack) 10.40mm MM-LFA40 85/86/108/109Locator female analog 5mm dia. (4 Pack) 10.40mm MM-LFA50 128Locator impression coping (4 Pack) 4.50mm MM-LIC10 85/108/128Locator light retention replacement male pink (4 Pack) 1.80mm MM-LLR10 86/109/129Locator male processing package (2 Pack) 1.80mm MM-LMP02 85/108/128Locator parallel post (4 Pack) 15mm MM-LPP10 86/109/129Locator replacement male clear (4 Pack) 1.80mm MM-LRM10 86/109/129Locator torque wrench driver long 21mm MM-LSD21 67/86/109/129Locator torque wrench driver short 15mm MM-LSD15 67/86/109/129Long cross driver for orthodontic screws MT-LCD20 29Long direct hand and ratchet hex. key MT-HMR10 46/53Long hand screwdriver for 0.05 hex. 29mm MT-HHR13 67/133/149Long hex. drive 0.05 22mm MT-HDL30 46/67/133Long insertion tool, int. hex. Connection MT-HLI10 8/10/13/16/45/53/55/63Long motor key adapter 0.05 30mm MT-LMK13 67/131Long prosthetic screw internal hex. 14mm / 30 MD-S0224 90/92/114/116
Cat. No. Page
M4 Advanced Surgical Kit MK-0016 54M4 Drilling Set MK-0014 56M4 internal hex. Implant 6mm MF4-06420 18/20M4 internal hex. Implant 6mm MF4-06500 21/22M4 internal hex. Implant 6mm MF4-06600 21/23M4 internal hex. Implant 8mm MF4-08375 18/19M4 internal hex. Implant 8mm MF4-08420 18/20M4 internal hex. Implant 8mm MF4-08500 21/22M4 internal hex. Implant 8mm MF4-08600 21/23M4 internal hex. Implant 10mm MF4-10330 16/17M4 internal hex. Implant 10mm MF4-10375 18/19M4 internal hex. Implant 10mm MF4-10420 18/20M4 internal hex. Implant 10mm MF4-10500 21/22M4 internal hex. Implant 10mm MF4-10600 21/23M4 internal hex. Implant 11.50mm MF4-11330 16/17M4 internal hex. Implant 11.50mm MF4-11375 18/19M4 internal hex. Implant 11.50mm MF4-11420 18/20M4 internal hex. Implant 11.50mm MF4-11500 21/22M4 internal hex. Implant 11.50mm MF4-11600 21/23M4 internal hex. Implant 13mm MF4-13330 16/17M4 internal hex. Implant 13mm MF4-13375 18/19M4 internal hex. Implant 13mm MF4-13420 18/20M4 internal hex. Implant 13mm MF4-13500 21/22M4 internal hex. Implant 13mm MF4-13600 21/23M4 internal hex. Implant 16mm MF4-16330 16/17M4 internal hex. Implant 16mm MF4-16375 18/19M4 internal hex. Implant 16mm MF4-16420 18/20M4 internal hex. Implant 16mm MF4-16500 21/22Mallet with solid-plastic insert 28.50mm MT-MAL10 48Marking drill 1.90mm 34mm MT-TD110 42Marking drill 1.90mm external irrigation 34mm MT-TDN19 42/53/55Medium prosthetic screw internal hex. 12mm / 30 MD-S0222 90/92/114/116MGUIDE fixation pin dia. 2.0mm MG-FP020 149MGUIDE set for Seven implant procedure MG-K001 144Mini prosthetic screw internal hex. 6.90mm / 30 MD-S0200 90/92/114/116MIS Physiuo 230 V MWH-M0131/2 138Mountless Basic Surgical Kit MK-0016 54Multi-unit 17deg. angulated abutment with hex. MA-ANH17 103/143Multi-unit 30deg. angulated abutment with hex. MA-ANH30 103/143Multi-unit abutment 1mm 1mm / 30-35 MA-S1375 103/143Multi-unit abutment 2mm 2mm / 30-35 MA-S2375 103/143Multi-unit abutment 3mm 3mm / 30-35 MA-S3375 103/143Multi-unit abutment 4mm 4mm / 30-35 MA-S4375 103/143Multi-unit abutment analog 12mm MA-RSM10 102/124Multi-unit bar gold coping 3.20mm MM-BGC45 103/125
M
176.
INDEX.Alphabetic Order
Cat. No. Page
Size
M4 Advanced Surgical Kit MK-0016 54M4 Drilling Set MK-0014 56M4 internal hex. Implant 6mm MF4-06420 18/20M4 internal hex. Implant 6mm MF4-06500 21/22M4 internal hex. Implant 6mm MF4-06600 21/23M4 internal hex. Implant 8mm MF4-08375 18/19M4 internal hex. Implant 8mm MF4-08420 18/20M4 internal hex. Implant 8mm MF4-08500 21/22M4 internal hex. Implant 8mm MF4-08600 21/23M4 internal hex. Implant 10mm MF4-10330 16/17M4 internal hex. Implant 10mm MF4-10375 18/19M4 internal hex. Implant 10mm MF4-10420 18/20M4 internal hex. Implant 10mm MF4-10500 21/22M4 internal hex. Implant 10mm MF4-10600 21/23M4 internal hex. Implant 11.50mm MF4-11330 16/17M4 internal hex. Implant 11.50mm MF4-11375 18/19M4 internal hex. Implant 11.50mm MF4-11420 18/20M4 internal hex. Implant 11.50mm MF4-11500 21/22M4 internal hex. Implant 11.50mm MF4-11600 21/23M4 internal hex. Implant 13mm MF4-13330 16/17M4 internal hex. Implant 13mm MF4-13375 18/19M4 internal hex. Implant 13mm MF4-13420 18/20M4 internal hex. Implant 13mm MF4-13500 21/22M4 internal hex. Implant 13mm MF4-13600 21/23M4 internal hex. Implant 16mm MF4-16330 16/17M4 internal hex. Implant 16mm MF4-16375 18/19M4 internal hex. Implant 16mm MF4-16420 18/20M4 internal hex. Implant 16mm MF4-16500 21/22Mallet with solid-plastic insert 28.50mm MT-MAL10 48Marking drill 1.90mm 34mm MT-TD110 42Marking drill 1.90mm external irrigation 34mm MT-TDN19 42/53/55Medium prosthetic screw internal hex. 12mm / 30 MD-S0222 90/92/114/116MGUIDE fixation pin dia. 2.0mm MG-FP020 149MGUIDE set for Seven implant procedure MG-K001 144Mini prosthetic screw internal hex. 6.90mm / 30 MD-S0200 90/92/114/116MIS Physiuo 230 V MWH-M0131/2 138Mountless Basic Surgical Kit MK-0016 54Multi-unit 17deg. angulated abutment with hex. MA-ANH17 103/143Multi-unit 30deg. angulated abutment with hex. MA-ANH30 103/143Multi-unit abutment 1mm 1mm / 30-35 MA-S1375 103/143Multi-unit abutment 2mm 2mm / 30-35 MA-S2375 103/143Multi-unit abutment 3mm 3mm / 30-35 MA-S3375 103/143Multi-unit abutment 4mm 4mm / 30-35 MA-S4375 103/143Multi-unit abutment analog 12mm MA-RSM10 102/124Multi-unit bar gold coping 3.20mm MM-BGC45 103/125
Multi-unit direct gold 15mm MM-MG450 103/125Multi-unit direct prosthetic gold screw 3.70mm /20 MM-G0330 103/125Multi-unit direct prosthetic screw 3.70mm /25 MM-S0330 103/125Multi-unit healing cap 3mm MH-00450 103/125Multi-unit impression coping for closed tray 11.70mm MM-IT450 102/124Multi-unit impression coping for open tray MM-IO450 102/124Multi-unit key 22mm MT-MUK02 67/102/125Multi-unit plastic cylinder 10mm MM-CP045 103/125/143Multi-Unit temporary cylinder 10mm MM-T0450 103/1244
Narrow ball attachment key 5mm MT-NB225 72/84/105/126/132Narrow cementing post 10.50mm MD-CTP10 91Narrow prosthetic kit 4mm, crown height 4mm, NP MK-NPK44 75Narrow prosthetic kit 4mm, crown height 6mm, NP MK-NPK64 75Narrow prosthetic kit 3mm, crown height 4mm, NP MK-NPK43 75Narrow prosthetic kit 3mm, crown height 6mm, NP MK-NPK63 75Narrow prosthetic kit 2mm, crown height 4mm, NP MK-NPK42 75Narrow prosthetic kit 2mm, crown height 6mm, NP MK-NPK62 75Narrow prosthetic kit 1mm, crown height 6mm, NP MK-NPK61 74/75Narrow prosthetic kit 1mm, crown height 4mm, NP 1mm MK-NPK41 75Narrow platform cementing post, NP 6mm MN-MAC10 77Narrow profile temporary plastic abutment, SP MD-TPA12 90Narrow profile temporary plastic abutment, WP MW-TPA12 114Narrow profle temporary plastic abutment, NP MN-TPA12 76
Ortho anchor pilot drill 1mm 1mm MT-TDO01 29Orthodontic Anchor Screw 1.6mm MG2-06160 29Orthodontic Anchor Screw 1.6mm MG2-08160 29Orthodontic Anchor Screw 1.6mm MG2-10160 29Orthodontic Anchor Screw 1.6mm MG2-12160 29OT Equator analog OE-RSM60 81/97/121OT Equator impression transfer cap OE-IC001 81/97/121OT Equator impression transfer cap OE-IC002 81/97/121OT Equator insertion tool ET-IT001 81/97/121OT Equator int. hex. kit, gingiva height 1mm, NP MK-NOE1 80OT Equator int. hex. kit, gingiva height 1mm, SP MK-SOE1 96OT Equator int. hex. kit, gingiva height 1mm, WP MK-WOE1 120OT Equator int. hex. kit, gingiva height 2mm, NP MK-NOE2 80OT Equator int. hex. kit, gingiva height 2mm, SP MK-SOE2 96OT Equator int. hex. kit, gingiva height 3mm, NP MK-NOE3 80OT Equator int. hex. kit, gingiva height 3mm, SP MK-SOE3 96
N
O
Cat. No. Page
OT Equator int. hex. kit, gingiva height 3mm, WP MK-WOE3 120OT Equator int. hex. kit, gingiva height 4mm, NP MK-NOE4 80OT Equator int. hex. kit, gingiva height 4mm, SP MK-SOE4 96OT Equator int. hex. kit, gingiva height 5mm, NP MK-NOE5 80OT Equator int. hex. kit, gingiva height 5mm, SP MK-SOE5 96OT Equator int. hex. kit, gingiva height 5mm, WP MK-WOE5 120
Parallel pin 24mm MT-PP001 45/65Parallel pin dia.2.40/3mm for tapered impl. procedure MT-PP240 53/55Pilot drill 2mm external irrigation 37.30mm MT-TDN20 34/65/149Pilot drill with built in stopper dia.2.40 height 10mm MT-P2410 34/53Pilot drill with built in stopper dia.2.40 height 11.5mm MT-P2411 34/53Pilot drill with built in stopper dia.2.40 height 13mm MT-P2413 34/53Pilot drill with built in stopper dia.2.40 height 16mm MT-P2416 34/53/55/65Pilot drill with built in stopper dia.2.40 height 6mm MT-P2406 34/53Pilot drill with built in stopper dia.2.40 height 8mm MT-P2408 34/53Plastic ball cap 3.5mm MB-SF200 84/106/127Plastic bar-ovoid 80mm MM-PBU10 130/143Plastic bar-round 85mm MM-PC100 130Plastic disc for ball attachment MB-DB235 84/106/127Plastic healing cap crown h. 6mm, NP MN-CHC60 74Plastic healing cap crown h. 6mm, SP MM-CHC60 88Plastic mounting sleeve 2mm MB-PR010 84/106/127Premolar esthetic Ti abutment int. hex. connection, SP MD-PM040 100Premolar esthetic Ti abutment int. hex. connection, WP MW-PM040 72/122Premolar zirconia crown, SP MM-SPZ40 72Press fit impression coping for closed tray 13mm MD-PF375 87Prosthetic introduction case MK-PIC01 142Prosthetic planning kit MK-0040 131/136/137/143Prosthetic tools kit MK-0039 66
Ratchet wrench 75mm MT-RI030 48/53/55/63/65/149Reamer Shoulders MT-CS450 134
P
R
178.
INDEX.Alphabetic Order
Cat. No. Page
OT Equator int. hex. kit, gingiva height 3mm, WP MK-WOE3 120OT Equator int. hex. kit, gingiva height 4mm, NP MK-NOE4 80OT Equator int. hex. kit, gingiva height 4mm, SP MK-SOE4 96OT Equator int. hex. kit, gingiva height 5mm, NP MK-NOE5 80OT Equator int. hex. kit, gingiva height 5mm, SP MK-SOE5 96OT Equator int. hex. kit, gingiva height 5mm, WP MK-WOE5 120
Parallel pin 24mm MT-PP001 45/65Parallel pin dia.2.40/3mm for tapered impl. procedure MT-PP240 53/55Pilot drill 2mm external irrigation 37.30mm MT-TDN20 34/65/149Pilot drill with built in stopper dia.2.40 height 10mm MT-P2410 34/53Pilot drill with built in stopper dia.2.40 height 11.5mm MT-P2411 34/53Pilot drill with built in stopper dia.2.40 height 13mm MT-P2413 34/53Pilot drill with built in stopper dia.2.40 height 16mm MT-P2416 34/53/55/65Pilot drill with built in stopper dia.2.40 height 6mm MT-P2406 34/53Pilot drill with built in stopper dia.2.40 height 8mm MT-P2408 34/53Plastic ball cap 3.5mm MB-SF200 84/106/127Plastic bar-ovoid 80mm MM-PBU10 130/143Plastic bar-round 85mm MM-PC100 130Plastic disc for ball attachment MB-DB235 84/106/127Plastic healing cap crown h. 6mm, NP MN-CHC60 74Plastic healing cap crown h. 6mm, SP MM-CHC60 88Plastic mounting sleeve 2mm MB-PR010 84/106/127Premolar esthetic Ti abutment int. hex. connection, SP MD-PM040 100Premolar esthetic Ti abutment int. hex. connection, WP MW-PM040 72/122Premolar zirconia crown, SP MM-SPZ40 72Press fit impression coping for closed tray 13mm MD-PF375 87Prosthetic introduction case MK-PIC01 142Prosthetic planning kit MK-0040 131/136/137/143Prosthetic tools kit MK-0039 66
Ratchet wrench 75mm MT-RI030 48/53/55/63/65/149Reamer Shoulders MT-CS450 134
P
R
Scanning abutment int. hex. connection, NP MN-SP001 72/78/79Scanning abutment int. hex. connection, SP MD-SP001 94/95Scanning abutment int. hex. connection, WP MW-SP001 72/118/119Screw driver for titanium ball cap 60mm MT-TSD10 84/106/127/132Seven internal hex. Implant 6mm MF7-06420 10/12Seven internal hex. Implant 6mm MF7-06500 13/14Seven internal hex. Implant 6mm MF7-06600 13/15Seven internal hex. Implant 8mm MF7-08375 10/11Seven internal hex. Implant 8mm MF7-08420 10/12Seven internal hex. Implant 8mm MF7-08500 13/14Seven internal hex. Implant 8mm MF7-08600 13/15Seven internal hex. Implant 10mm MF7-10330 8/9Seven internal hex. Implant 10mm MF7-10375 10/11Seven internal hex. Implant 10mm MF7-10420 10/12Seven internal hex. Implant 10mm MF7-10500 13/14Seven internal hex. Implant 10mm MF7-10600 13/15Seven internal hex. Implant 11.50mm MF7-11330 8/9Seven internal hex. Implant 11.50mm MF7-11375 10/11Seven internal hex. Implant 11.50mm MF7-11420 10/12Seven internal hex. Implant 11.50mm MF7-11500 13/14Seven internal hex. Implant 11.50mm MF7-11600 13/15Seven internal hex. Implant 13mm MF7-13330 8/9Seven internal hex. Implant 13mm MF7-13375 10/11Seven internal hex. Implant 13mm MF7-13420 10/12Seven internal hex. Implant 13mm MF7-13500 13/14Seven internal hex. Implant 13mm MF7-13600 13/15Seven internal hex. Implant 16mm MF7-16330 8/9Seven internal hex. Implant 16mm MF7-16375 10/11Seven internal hex. Implant 16mm MF7-16420 10/12Seven internal hex. Implant 16mm MF7-16500 13/14Short cross driver for orthodontic screws MT-SCD20 29Short direct hand and ratchet hex. key MT-HMR05 46Short hex. drive 0.05 16mm MT-HDS30 46/67/133Short insertion tool, int. hex. connection MT-HSI10 8/10/13/16/18/45/53/55/63Short motor adapter for 0.05" hex. MT-LM005 46/53/55/81/97/121/132Short motor adapter for 0.05" hex. MT-SM005 46/53/55/81/97/121/132Short motor key adapter 0.05 22mm MT-SMK13 67/131Short screwdriver for 0.05 hex. 22mm MT-HHR07 67/133Sinus concave bajonet osteotome with stopper dia. 2mm MO-SLA20 50Sinus concave bajonet osteotome with stopper dia. 3.25mm MO-SLA32 50Sinus concave bajonet osteotome with stopper dia. 3mm MO-SLA30 50Sinus concave bajonet osteotome with stopper dia. 4mm MO-SLA40 50Sinus concave osteotome with stopper dia. 2mm MO-SLS20 50Sinus concave osteotome with stopper dia. 3.25mm MO-SLS32 50Sinus concave osteotome with stopper dia. 3mm MO-SLS30 50
SCat. No. Page
Sinus concave osteotome with stopper dia. 4mm MO-SLS40 50Sinus lift osteotomes set MK-0023 68Soft plastic cap for metal housing 2.60mm MB-PPR10 84/106/127Spade marking drill 27.50mm MT-SMD10 42/53/55/63/65Square connection to ratchet adapter MT-SRA10 8/10/13/16/18/45/63Standard abutment analog crown height 6mm, SP MD-RSM60 88Standard cementing post 11.50mm MD-MAC10 91/143Standard plastic cap for metal housing 2.6mm MB-PPC10 84/106/127Surgical adapter driver 120mm MT-MSD20 29/48/67/134Surgical kit for Seven impl. system with ext. irr. drill MK-EI48 52/131
Technical hex. screw driver 142.5mm MT-HTS10 134Temporary plastic abutment, NP MN-TPA10 77Temporary plastic abutment, SP MD-TPA10 91Temporary plastic abutment, WP MW-TPA10 115The Organizer Kit MK-0012 50Ti Base h. 4mm with hex int . hex. SP MD-TB001 94Ti Base h. 4mm without hex, int. hex., WP MW-TB002 119Ti base int. hex. connection for CAD/CAM, Narrow platform MN-TB001 78Ti base int. hex. connection for CAD/CAM, WP MW-TB001 118TI base kit h.4mm for int. hex. connection, NP MK-TBN4 78TI base kit h.4mm for int. hex. connection, SP MK-TBS4 72/94TI base kit h.4mm for int. hex. connection, WP MK-TBW4 72/118Tissue punch 28mm MT-TP500 46Tissue punch dia. 4.20mm 29.50mm MT-TP420 48Titanium ball cap 3.1mm MB-TTP10 84/106/127Titanium ball cap spring soft MB-TBS20 84/106/127Titanium ball cap spring standard MB-TBS10 84/106/127Titanium rider-ovoid 50mm MM-TRU10 130/143Torque Ratchet kit MT-RI050 49Torque wrench 80mm MT-RI040 48/67Trephine bur 4mm 37mm MT-00400 43Trephine bur 5mm 37mm MT-00500 43Trephine bur 6mm 37mm MT-00600 43Twist drill 2.80mm 37.50mm MT-TD280 40Twist drill 2.80mm external irrigation 37.50mm MT-TDN28 36/50/55/56Twist drill 2.80mm external irrigation (red) MT-TDT28 35/53Twist drill 3.20mm 37.60mm MT-TD320 40Twist drill 3.20mm external irrigation 37.60mm MT-TDN32 36/50/55/56Twist drill 3.20mm external irrigation (blue) MT-TDT32 35/53Twist drill 3.80mm 37.80mm MT-TD380 40Twist drill 3.80mm external irrigation 37.80mm MT-TDN38 36/50/55/56Twist drill 3mm external irrigation (red) MT-TDT30 65
T
180.
INDEX.Alphabetic Order
Cat. No. Page
Sinus concave osteotome with stopper dia. 4mm MO-SLS40 50Sinus lift osteotomes set MK-0023 68Soft plastic cap for metal housing 2.60mm MB-PPR10 84/106/127Spade marking drill 27.50mm MT-SMD10 42/53/55/63/65Square connection to ratchet adapter MT-SRA10 8/10/13/16/18/45/63Standard abutment analog crown height 6mm, SP MD-RSM60 88Standard cementing post 11.50mm MD-MAC10 91/143Standard plastic cap for metal housing 2.6mm MB-PPC10 84/106/127Surgical adapter driver 120mm MT-MSD20 29/48/67/134Surgical kit for Seven impl. system with ext. irr. drill MK-EI48 52/131
Technical hex. screw driver 142.5mm MT-HTS10 134Temporary plastic abutment, NP MN-TPA10 77Temporary plastic abutment, SP MD-TPA10 91Temporary plastic abutment, WP MW-TPA10 115The Organizer Kit MK-0012 50Ti Base h. 4mm with hex int . hex. SP MD-TB001 94Ti Base h. 4mm without hex, int. hex., WP MW-TB002 119Ti base int. hex. connection for CAD/CAM, Narrow platform MN-TB001 78Ti base int. hex. connection for CAD/CAM, WP MW-TB001 118TI base kit h.4mm for int. hex. connection, NP MK-TBN4 78TI base kit h.4mm for int. hex. connection, SP MK-TBS4 72/94TI base kit h.4mm for int. hex. connection, WP MK-TBW4 72/118Tissue punch 28mm MT-TP500 46Tissue punch dia. 4.20mm 29.50mm MT-TP420 48Titanium ball cap 3.1mm MB-TTP10 84/106/127Titanium ball cap spring soft MB-TBS20 84/106/127Titanium ball cap spring standard MB-TBS10 84/106/127Titanium rider-ovoid 50mm MM-TRU10 130/143Torque Ratchet kit MT-RI050 49Torque wrench 80mm MT-RI040 48/67Trephine bur 4mm 37mm MT-00400 43Trephine bur 5mm 37mm MT-00500 43Trephine bur 6mm 37mm MT-00600 43Twist drill 2.80mm 37.50mm MT-TD280 40Twist drill 2.80mm external irrigation 37.50mm MT-TDN28 36/50/55/56Twist drill 2.80mm external irrigation (red) MT-TDT28 35/53Twist drill 3.20mm 37.60mm MT-TD320 40Twist drill 3.20mm external irrigation 37.60mm MT-TDN32 36/50/55/56Twist drill 3.20mm external irrigation (blue) MT-TDT32 35/53Twist drill 3.80mm 37.80mm MT-TD380 40Twist drill 3.80mm external irrigation 37.80mm MT-TDN38 36/50/55/56Twist drill 3mm external irrigation (red) MT-TDT30 65
T
Twist drill 4.50mm 38.20mm MT-TD450 41Twist drill 4.50mm external irrigation (white) MT-TDT45 35/53Twist drill 4mm external irrigation (green) MT-TDT40 35/53Twist drill 5.50mm 38.20mm MT-TD550 41Twist drill 5.50mm external irrigation 38.20mm MT-TDN55 37/50/55/56Twist drill 5mm 38.20mm MT-TD500 41Twist drill 5mm external irrigation 38.20mm MT-TDN45 37/50/55/56Twist drill 5mm external irrigation 38.20mm MT-TDN50 37/50/55/56Twist drill 5mm external irrigation (white) MT-TDT50 35/53Twist short drill 2.80mm MT-TDI28 38Twist short drill 3.20mm MT-TDI32 38Twist short drill 3.80mm MT-TDI38 38Twist short drill 4.50mm MT-TDI45 39Twist short drill 4mm MT-TDI40 39Twist short drill 5.50mm MT-TDI55 39Twist short drill 5mm MT-TDI50 39
UNO implant surgical kit MK-0036 64/65UNO One Piece implant 10mm MO1-10350 25/27UNO One Piece implant 11.50mm MO1-11300 25/26UNO One Piece implant 11.50mm MO1-11350 25/27UNO One Piece implant 13mm MO1-13300 25/26UNO One Piece implant 13mm MO1-13350 25/27UNO One Piece implant 16mm MO1-16300 25/26UNO One Piece implant 16mm MO1-16350 25/27UNO One Piece implant analog 18mm MO1-RSA10 28UNO One Piece implant comfort plastic cap 12.40mm MM-OUP01 28UNO One Piece implant dia. 3 L 10mm MO1-10300 25/26UNO One Piece implant insertion tool 20mm MT-HKO21 25/44/65UNO One Piece implant long key 17mm MT-HKL21 25/44/65UNO One Piece implant motor adapter, long 30mm MT-UML21 44/65UNO One Piece implant motor adapter, short 22mm MT-UMS21 44UNO One Piece implant short key 12mm MT-HKS15 25/44
Wide abutment analog crown height 6mm, WP MW-RSM60 112Wide anatomic 1mm transgingival abutment, h. 6mm MW-CPK61 112Wide ball attachment anchor internal hex. 1mm 1mm MW-B1500 126Wide ball attachment anchor internal hex. 3mm 3mm MW-B3500 126Wide ball attachment anchor internal hex. 5mm 5mm MW-B5500 126Wide cementing post for WP 13mm MW-WMAC1 115Wide cementing post, SP 11.50mm MD-WMAC1 91
U
W
Cat. No. Page
Size Cat. No. Page
Wide dia. 15 degree angulated abutment internal hex. 11mm MW-AN151 116Wide dia. implant analog internal hex. 12mm MW-RSM10 72/111/118/119Wide dia. plastic cylinder with hex. internal hex. 13mm MW-CPH13 114Wide dia. plastic cylinder without hex. internal hex. 13mm MW-CP013 114Wide direct temporary plastic cylinder internal hex. 14mm MW-TPH50 114Wide esthetic 15 angulated abutment internal hex. 1mm 11mm MW-P1510 116Wide esthetic abutment internal hex. 1mm 11mm MW-P0010 116Wide gold plastic cylinder with hex. internal hex. 18.20mm MW-GPC10 114Wide int. hex. Implant analog for universal hand driver MT-UW002 67/134Wide plastic healing cap h. 6mm, WP MW-CHC60 112Wide platform cementing post 11.50mm MW-MAC10 115Wide platform multi-unit abutment 1mm 1mm / 30-35 MA-W1500 124Wide platform multi-unit abutment 2mm 2mm / 30-35 MA-W2500 124Wide platform multi-unit abutment 3mm 3mm / 30-35 MA-W3500 124Wide platform multi-unit abutment 4mm 4mm / 30-35 MA-W4500 124Wide profile direct plastic cylinder with hex. 12mm MD-CPH50 90Wide profile direct plastic cylinder without hex. 11mm MD-CP050 90
Yeung Bone Harvest kit MK-BH26 57
Zircon Diamond Burr Set MK-DB01 135Zirconia cemented incisor 15deg. abutment set int. hex., NP MK-NIC6 82/83Zirconia cemented incisor 15deg. abutment set int. hex., SP MK-SIC6 98/99Zirconia cemented premolar. abutment set int. hex., SP MK-SPC4 100/101Zirconia cemented premolar. abutment set int. hex., WP MK-WPC4 122/123Zirconia incisor 15deg. abutment set int. hex., NP MK-NIZ6 82/83Zirconia incisor 15deg. abutment set int. hex., SP MK-SIZ6 98/99
YZ
182.
INDEX.Alphabetic Order
Cat. No. Cat. No. Cat. No.Page Page Page
4B-X1010 152
4B-X1025 152
4B-X2505 152
4B-X2510 152
4B-X2525 152
4B-X2540 152
BS-4BS01 150
ET-IT001 81/97/121
GI-SCH11 78/79/94/95
GI-WCH11 118/119
MA-ANH17 103/143
MA-ANH30 103/143
MA-RSM10 102/124
MA-S1375 103/143
MA-S2375 103/143
MA-S3375 103/143
MA-S4375 103/143
MA-W1500 124
MA-W2500 124
MA-W3500 124
MA-W4500 124
MB-AN152 105/143
MB-AN252 105
MB-DB235 84/106/106/127
MB-DMH10 84/106/127
MB-GPS10 84/106/127
MB-N1375 105
MB-N2330 84
MB-N2375 105/143
MB-N3330 84
MB-N3375 105
MB-N4330 84
MB-N4375 105
MB-N5375 105
MB-NZL00 85
MB-NZL01 85
MB-NZL02 85
MB-NZL03 85
MB-NZL04 85
MB-NZL05 85
MB-NZL06 85
MB-PPC10 84/106/127
MB-PPR10 84/106/127
MB-PR010 84/106/127
MB-RS375 84/105/126
MB-SF200 84/106/127
MB-SZL00 108
MB-SZL01 108
MB-SZL02 108
MB-SZL03 108
MB-SZL04 108
MB-SZL05 108
MB-SZL06 108
MB-TBS10 84/106/127
MB-TBS20 84/106/127
MB-TTP10 84/106/127
MB-WZL00 128
MB-WZL01 128
MB-WZL02 128
MB-WZL03 128
MB-WZL04 128
MB-WZL05 128
MB-WZL06 128
MD-A0010 91/143
MD-A0010-8 137
MD-A1510 92/143
MD-A1510-11 137
MD-A2510 92
MD-A2510-12 137
MD-AN151 92
MD-AN151-9 137
MD-AN251 92
MD-AN251-10 137
MD-CP013 90/143
MD-CP050 90
MD-CPH13 90/143
MD-CPH50 90
MD-CPK42 143
MD-CPK61 88
MD-CPK81-1 137
MD-CPK82-2 137
MD-CPK83-3 137
MD-CPK84-4 137
MD-CTP10 91
MD-CTP10-5 137
MD-G0213 87/111
MD-G0220 90/92/114/116
MD-GP010 90
MD-GP100 87/111
MD-GPC10 90
MD-GT190 137
MD-I0375 87
MD-IC040 88
MD-IC800 88
MD-ICH40 88
MD-IT100 87
MD-IT300 87
MD-MAC10 91/143
MD-MAC10-6 137
MD-MACF1 91
MD-P0030 91
MD-P0030-7 137
MD-P1530 92
MD-P1530-13 137
MD-P2530 92
MD-P2530-14 137
MD-PF375 87
MD-PM040 100
MD-RSM10 72/87/94/95
MD-RSM60 88
MD-S0200 90/92/114/116
INDEX.Numeric Order
Cat. No. Cat. No. Cat. No.Page Page Page
MD-MAC10-6 137
MD-MACF1 91
MD-P0030 91
MD-P0030-7 137
MD-P1530 92
MD-P1530-13 137
MD-P2530 92
MD-P2530-14 137
MD-PF375 87
MD-PM040 100
MD-RSM10 72/87/94/95
MD-RSM60 88
MD-S0200 90/92/114/116
MD-S0220 50/72/90/92
MD-S0222 90/92/114/116
MD-S0224 90/92/114/116
MD-SP001 94/95
MD-TB001 94
MD-TB002 95
MD-TCH13 90
MD-TPA10 91
MD-TPA12 90
MD-TPH50 90
MD-WMAC1 91
MF4-06420 18/20
MF4-06500 21/22
MF4-06600 21/23
MF4-08375 18/19
MF4-08420 18/20
MF4-08500 21/22
MF4-08600 21/23
MF4-10330 16/17
MF4-10375 18/19
MF4-10420 18/20
MF4-10500 21/22
MF4-10600 21/23
MF4-11330 16/17
MF4-11375 18/19
MF4-11420 18/20
MF4-11500 21/22
MF4-11600 21/23
MF4-13330 16/17
MF4-13375 18/19
MF4-13420 18/20
MF4-13500 21/22
MF4-13600 21/23
MF4-16330 16/17
MF4-16375 18/19
MF4-16420 18/20
MF4-16500 21/22
MF7-06420 10/12
MF7-06500 13/14
MF7-06600 13/15
MF7-08375 10/11
MF7-08420 10/12
MF7-08500 13/14
MF7-08600 13/15
MF7-10330 8/9
MF7-10375 10/11
MF7-10420 10/12
MF7-10500 13/14
MF7-10600 13/15
MF7-11330 8/9
MF7-11375 10/11
MF7-11420 10/12
MF7-11500 13/14
MF7-11600 13/15
MF7-13330 8/9
MF7-13375 10/11
MF7-13420 10/12
MF7-13500 13/14
MF7-13600 13/15
MF7-16330 8/9
MF7-16375 10/11
MF7-16420 10/12
MF7-16500 13/14
MG2-06160 29
MG2-08160 29
MG2-10160 29
MG2-12160 29
MG-BM047 147
MG-BM055 147
MG-D0624 147
MG-D0633 147
MG-D0637 147
MG-D0642 147
MG-D0650 147
MG-D0824 147
MG-D0833 147
MG-D0837 147
MG-D0842 147
MG-D0850 147
MG-D1024 147
MG-D1033 147
MG-D1037 147
MG-D1042 147
MG-D1050 147
MG-D1124 147
MG-D1133 147
MG-D1142 147
MG-D1150 147
MG-D1324 147
MG-D1333 147
MG-D1342 147
MG-D1350 147
MG-DLG55 147
MD-S0220 90/92/114/116
MD-S0222 90/92/114/116
MD-S0224 90/92/114/116
MD-SP001 94/95
MD-TB001 94
184.
INDEX.Alphabetic Order
Cat. No. Cat. No. Cat. No.Page Page Page
MD-TB002 95
MD-TCH13 90
MD-TPA10 91
MD-TPA12 90
MD-TPH50 90
MD-WMAC1 91
MF4-06420 18/20
MF4-06500 21/22
MF4-06600 21/23
MF4-08375 18/19
MF4-08420 18/20
MF4-08500 21/22
MF4-08600 21/23
MF4-10330 16/17
MF4-10375 18/19
MF4-10420 18/20
MF4-10500 21/22
MF4-10600 21/23
MF4-11330 16/17
MF4-11375 18/19
MF4-11420 18/20
MF4-11500 21/22
MF4-11600 21/23
MF4-13330 16/17
MF4-13375 18/19
MF4-13420 18/20
MF4-13500 21/22
MF4-13600 21/23
MF4-16330 16/17
MF4-16375 18/19
MF4-16420 18/20
MF4-16500 21/22
MF7-06420 10/12
MF7-06500 13/14
MF7-06600 13/15
MF7-08375 10/11
MF7-08420 10/12
MF7-08500 13/14
MF7-08600 13/15
MF7-10330 8/9
MF7-10375 10/11
MF7-10420 10/12
MF7-10500 13/14
MF7-10600 13/15
MF7-11330 8/9
MF7-11375 10/11
MF7-11420 10/12
MF7-11500 13/14
MF7-11600 13/15
MF7-13330 8/9
MF7-13375 10/11
MF7-13420 10/12
MF7-13500 13/14
MF7-13600 13/15
MF7-16330 8/9
MF7-16375 10/11
MF7-16420 10/12
MF7-16500 13/14
MG2-06160 29
MG2-08160 29
MG2-10160 29
MG2-12160 29
MG-BM047 147
MG-BM055 147
MG-D0624 147
MG-D0633 147
MG-D0637 147
MG-D0642 147
MG-D0650 147
MG-D0824 147
MG-D0833 147
MG-D0837 147
MG-D0842 147
MG-D0850 147
MG-D1024 147
MG-D1033 147
MG-D1037 147
MG-D1042 147
MG-D1050 147
MG-D1124 147
MG-D1133 147
MG-D1142 147
MG-D1150 147
MG-D1324 147
MG-D1333 147
MG-D1342 147
MG-D1350 147
MG-DLG55 147
MG-FP020 149
MG-GMI10 149
MG-GRI01 149
MG-GRI10 149
MG-GRN01 149
MG-IE160 149
MG-IE172 149
MG-K001 144
MG-TP047 147
MG-TP055 147
MH-00450 103/125
MK-0001 141/143
MK-0011 60
MK-0012 50
MK-0014 56
MK-0016 54
MK-0020 62/63
MK-0022 140
MK-BH26 57
MK-BS001 58
MK-CPK41 89
MK-CPK42 89/143
MK-CPK43 89
Cat. No. Cat. No. Cat. No.Page Page Page
MG-FP020 149
MG-GMI10 149
MG-GRI01 149
MG-GRI10 149
MG-GRN01 149
MG-IE160 149
MG-IE172 149
MG-K001 144
MG-TP047 147
MG-TP055 147
MH-00450 103/125
MK-0001 141/143
MK-0011 60
MK-0012 50
MK-0014 56
MK-0016 54
MK-0020 62/63
MK-0022 140
MK-0023 68
MK-0024 69
MK-0036 64/65
MK-0039 66
MK-0040 131/136/137/143
MK-BH26 57
MK-BS001 58
MK-CPK41 89
MK-CPK42 89/143
MK-CPK43 89
MK-CPK44 89
MK-CPK61 88/89
MK-CPK62 89
MK-CPK63 89
MK-CPK64 89
MK-CPK81 89
MK-CPK82 89
MK-CPK83 89
MK-CPK84 89
MK-DB01 135
MK-EI48 52/131
MK-MUS4 95
MK-MUW4 119
MK-NIC6 82/83
MK-NIZ6 82/83
MK-NOE1 80
MK-NOE2 80
MK-NOE3 80
MK-NOE4 80
MK-NOE5 80
MK-NPK41 75
MK-NPK42 75
MK-NPK43 75
MK-NPK44 75
MK-NPK61 74/75
MK-NPK62 75
MK-NPK63 75
MK-NPK64 75
MK-PIC01 142
MK-SDS06 59
MK-SDS08 59
MK-SDS10 59
MK-SDS11 59
MK-SDS13 59
MK-SIC6 98/99
MK-SIZ6 98/99
MK-SOE1 96
MK-SOE2 96
MK-SOE3 96
MK-SOE4 96
MK-SOE5 96
MK-SPC4 100/101
MK-SPZ4 100/101
MK-TBN4 78
MK-TBS4 72/94
MK-TBW4 72/118
MK-WOE1 120
MK-WOE3 120
MK-WOE5 120
MK-WPC4 122/123
MK-WPK41 113
MK-WPK42 113
MK-WPK43 113
MK-WPK44 113
MK-WPK61 112/113
MK-WPK62 113
MK-WPK63 113
MK-WPK64 113
MK-WPK81 113
MK-WPK82 113
MK-WPK83 113
MK-WPK84 113
MK-WPZ4 122/123
MM-BGC45 103/125
MM-CHC60 88
MM-CP045 103/125/143
MM-G0330 103/125
MM-GB100 130
MM-GBU10 130
MM-GRU10 130
MM-IO450 102/124
MM-IT450 102/124
MM-LBP10 86/109/129
MM-LCT10 67/85/108
MM-LEL10 86/109/129
MM-LELE1 86/109
MM-LER10 86/109/129
MM-LFA40 85/86/108/109
MK-0023 68
MK-0024 69
MK-0036 64/65
MK-0039 66
MK-0040 131/136/137/143
186.
INDEX.Alphabetic Order
Cat. No. Cat. No. Cat. No.Page Page Page
MK-CPK44 89
MK-CPK61 88/89
MK-CPK62 89
MK-CPK63 89
MK-CPK64 89
MK-CPK81 89
MK-CPK82 89
MK-CPK83 89
MK-CPK84 89
MK-DB01 135
MK-EI48 52/131
MK-MUS4 95
MK-MUW4 119
MK-NIC6 82/83
MK-NIZ6 82/83
MK-NOE1 80
MK-NOE2 80
MK-NOE3 80
MK-NOE4 80
MK-NOE5 80
MK-NPK41 75
MK-NPK42 75
MK-NPK43 75
MK-NPK44 75
MK-NPK61 74/75
MK-NPK62 75
MK-NPK63 75
MK-NPK64 75
MK-PIC01 142
MK-SDS06 59
MK-SDS08 59
MK-SDS10 59
MK-SDS11 59
MK-SDS13 59
MK-SIC6 98/99
MK-SIZ6 98/99
MK-SOE1 96
MK-SOE2 96
MK-SOE3 96
MK-SOE4 96
MK-SOE5 96
MK-SPC4 100/101
MK-SPZ4 100/101
MK-TBN4 78
MK-TBS4 72/94
MK-TBW4 72/118
MK-WOE1 120
MK-WOE3 120
MK-WOE5 120
MK-WPC4 122/123
MK-WPK41 113
MK-WPK42 113
MK-WPK43 113
MK-WPK44 113
MK-WPK61 112/113
MK-WPK62 113
MK-WPK63 113
MK-WPK64 113
MK-WPK81 113
MK-WPK82 113
MK-WPK83 113
MK-WPK84 113
MK-WPZ4 122/123
MM-BGC45 103/125
MM-CHC60 88
MM-CP045 103/125/143
MM-G0330 103/125
MM-GB100 130
MM-GBU10 130
MM-GRU10 130
MM-IO450 102/124
MM-IT450 102/124
MM-LBP10 86/109/129
MM-LCT10 67/85/108
MM-LEL10 86/109/129
MM-LELE1 86/109/129
MM-LER10 86/109/129
MM-LFA40 85/86/108/109
MM-LFA50 128
MM-LIC10 85/108/128
MM-LLR10 86/109/129
MM-LMP02 85/108/128
MM-LPP10 86/109/129
MM-LRM10 86/109/129
MM-LSD15 67/86/109/129
MM-LSD21 67/86/109/129
MM-MG450 103/125
MM-OUP01 28
MM-PBU10 130/143
MM-PC100 130
MM-S0330 103/125
MM-SPZ40 72
MM-T0450 103/124
MM-TC100 130
MM-TRU10 130/143
MN-AN020 77
MN-CHC60 74
MN-CP013 76
MN-CPH13 76
MN-CPK61 74
MN-G0160 73
MN-GP010 76
MN-GP100 73
MN-GPC10 76
MN-I0330 73
MN-IC040 74
MN-IC600 74
MN-ICH40 74
MN-IT100 73
MN-IT300 73
MN-MAC10 77
188.
Cat. No. Cat. No. Cat. No.Page Page Page
MN-PF330 73
MN-RSM10 72/73/78/79
MN-RSM60 74
MN-S0160 72/76/77/78
MN-SP001 72/78/79
MN-TB001 78
MN-TB002 79
MN-TPA10 77
MN-TPA12 76
MO1-10300 25/26
MO1-10350 25/27
MO1-11300 25/26
MO1-11350 25/27
MO1-13300 25/26
MO1-13350 25/27
MO1-16300 25/26
MO1-16350 25/27
MO1-RSA10 28
MO-CBS20 50
MO-CBS30 50
MO-CBS32 50
MO-CBS40 50
MO-CO160 50/63
MO-CO200 63
MO-CO240 63
MO-CO280 63
MO-CS200 50
MO-CS300 50
MO-CS325 50
MO-CS400 50
MO-SLA20 50
MO-SLA30 50
MO-SLA32 50
MO-SLA40 50
MO-SLS20 50
MO-SLS30 50
MO-SLS32 50
MO-SLS40 50
MO-SO300 63
MO-SO350 63
MO-SO400 63
MT-00400 43
MT-00500 43
MT-00600 43
MT-A4022 135
MT-AL005 132
MT-B4018 135
MT-BC280 57
MT-BC320 57
MT-BC380 57
MT-BC450 57
MT-BK235 67/143
MT-BTI10 48
MT-BTT20 65
MT-BTT24 53/65
MT-BTT28 53
MT-BTT30 65
MT-BTT32 53
MT-BTT40 53
MT-BTT45 53
MT-BTT50 53
MT-C3125 135
MT-CRD20 43
MT-CRD21 43
MT-CRD28 43
MT-CS450 134
MT-CSN33 42/50/55/56
MT-DE001 45/53/55
MT-DI001 46/53/67
MT-F2121 135
MT-GDM01 131/134
MT-GDN33 42/50/53/55/56
MT-GDN50 32/42/50/53/55/56
MT-HDL30 46/67/133
MT-HDS30 46/67/133
MT-HHR07 67/133
MT-HHR13 67/133/149
MT-HKL21 25/44/44/65
MT-HKO21 25/44/65
MT-HKS15 25/44
MT-HLI10 8/10/13/16/18/45
MT-HMR05 46
MT-HMR10 46/53
MT-HSI10 8/10/13/16/18/45
MT-HTS10 134
MT-HW001 45
MT-IE160 133
MT-IE172 67/133
MT-IT100 67/132
MT-K2023 135
MT-LCD20 29
MT-LM005 46/53/132
MT-LMK13 67/131
MT-MAL10 48
MT-MRH10 45
MT-MRH20 45
MT-MRH25 55
MT-MSD20 29/48/48/67/134
MT-MUK02 67/102/125
MT-NB225 72/84/105/126/132
MT-NRH20 8/16/45/53
MT-P2406 34/53
MT-P2408 34/53
MT-P2410 34/53
MT-P2411 34/53
MT-P2413 34/53
MT-P2416 34/53/55/65
MT-PP001 45/65
MT-PP240 53/55
MT-RI030 48/53/55/63
MT-RI040 48/67
188.
INDEX.Alphabetic Order
Cat. No. Cat. No.Page Page Cat. No. Page
MT-RI050 49
MT-SCD20 29
MT-SHA10 8/10/13/16/18/45
MT-SM005 46/53/55/132
MT-SMD10 42/53/55/63/65
MT-SMK13 67/131
MT-SRA10 8/10/13/16/32/45
MT-TD110 42
MT-TD280 40
MT-TD320 40
MT-TD380 40
MT-TD450 41
MT-TD500 41
MT-TD550 41
MT-TDI28 38
MT-TDI32 38
MT-TDI38 38
MT-TDI40 39
MT-TDI45 39
MT-TDI50 39
MT-TDI55 39
MT-TDN19 42/53/55
MT-TDN20 34/65/149
MT-TDN28 36/50/55/56
MT-TDN32 36/50/55/56
MT-TDN38 36/50/55/56
MT-TDN45 37/50/55/56
MT-TDN50 37/50/55/56
MT-TDN55 37/50/55/56
MT-TDO01 29
MT-TDT28 35/53
MT-TDT30 65
MT-TDT32 35/53
MT-TDT40 35/53
MT-TDT45 35/53
MT-TDT50 35/53
MT-TP420 48
MT-TP500 46
MT-TSD10 84/106/127/132
MT-UML21 44/65
MT-UMS21 44
MT-UN002 134
MT-US002 67/134
MT-UW002 67/134
MW-AN151 116
MW-AN151-21 137/143
MW-B1500 126
MW-B3500 126
MW-B5500 126
MW-CHC60 112
MW-CP013 114
MW-CP060 114
MW-CPH13 114
MW-CPH60 114
MW-CPK61 112
MW-CPK81-15 137
MW-CPK82-16 137
MW-CPK83-17 137
MW-CPK84-18 137
MW-CTP10 115
MW-CTP10-19 137
MW-GP010 114
MW-GPC10 114
MWH-M013/2 138
MW-I0470 111
MW-IC040 112
MW-IC800 112
MW-ICH40 112
MW-IT100 111
MW-IT300 110/111
MW-MAC10 115
MW-MAC10-20 137
MW-P0010 116
MW-P1510 116
MW-P1510-22 137
MW-PF550 111
MW-PM040 72/122
MW-RSM10 72/111/118/119
MW-RSM60 112
MW-SP001 72/118/119
MW-TB001 118
MW-TB002 119
MW-TPA10 115
MW-TPA12 114
MW-TPH50 114
MW-WMAC1 115
OE-IC001 81/97/121
OE-IC002 81/97/121
OE-RSM60 81/97/121
All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.
MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Qua l i t y Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
Internal HexagonProduct Catalog, 2014
Internal Hexagon Product C
atalog, 2014
MC-CIH06 REV.11
To learn more about M ISvisi t our website :
www.mis-implants.comor scan the QR Code