MINNESOTA PENNSYLVANIA TEXAS · horizontal drilling. Slim Bar - Light-weight rail-mounted block...
Transcript of MINNESOTA PENNSYLVANIA TEXAS · horizontal drilling. Slim Bar - Light-weight rail-mounted block...
MINNESOTARockville, MN800.789.0815
TEXASDallas, TX
214.470.3355
VERMONTBarre, VT
800.396.8049
PENNSYLVANIAMontrose, PA888.278.8383
milessupply.com
GEORGIA Elberton, GA888.283.5863
MACHINE Catalog
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.08152
Quarry Machines Pellegrini Wire Saws 3 Drills 3
Slabbing Pellegrini Single Wire Machines 4, 5 DF America 4 DF1200 5 DF2000/2500 4 Pellegrini Multi-wire Machines 6-8 Double Top 6 Pentawire 6 Polywire 5S 8 Decawire 7 Polywire 16/34 7 Polywire 54 8
Shape Cutting Pellegrini Robotwire 9 Pellegrini Jolly Machines 4, 5
Polishing / Surfacing Pellegrini Marmomachine 10 Donatoni Zenit Polisher 12 Lupato texture plates 10, 11 PadHead™ polishing & grinding heads 11
Cutting / Shaping 14-19 Donatoni family of saws 12 Jet/Echo/Sprinter/Rapid 15, 24 Kronos 16 Quadrix DV & DG 17 SX-3 18 Donatoni Options 18, 19 Intermac WorkCenter 13
Intermac WaterJet 13
Tile Production Donatoni SX-3 Multi-spindle CNC 18
Water Treatment Plants Fraccaroli & Balzan Compact Plant 20 Large Plant 20
Dust Collection 20
Sandblasting SandHandler 21
Material Handling 22Air Compressors 23
milessupply.com
Machine Catalog ©2016
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 3
Drilling Machines
Quarry Diamond Wire Saws
Quarry Chain Saw
TD 25Diamond wire saw for block dressing and small cuts in the quarry.TD 45-55-65 Diamond wire saw for cuts of all sizes. TD 80 (-100) Diamond wire saw for cutting large benches. TDD 100-120 Super Diamond wire saw with a Diesel engine and a hydraulic converter to cut benches of any size in marble and/or granite.
Ask about the new radio remote; controls Pellegrini Telediam Quarry Diamond Wire Saws (45-100HP) up to 100 meters away.
TBC 90 - Rail-mounted block cutter with one or two drills with thrust adjustment and air motor for travel along the rails. Kit for horizontal drilling.
Slim Bar - Light-weight rail-mounted block cutter, one drill, with thrust adjustment and air motor for travel along the rails. With a spherical coupling, can drill at any angle.
Slim Driller - Pneumatic drill fitted with a down-the-hole ham-mer for vertical and horizontal holes to pass diamond wire through massive rock.
Horizontal drill for rows of holes on the quarry-floor level.
QUARRY MACHINES: all the equipment needed to quarry dimensional blocks of marble, granite and other stone types. Machine range includes a number of models of cutting machines using diamond wire, drilling machines and equipment for tipping and splitting
STATIONARY MACHINES USING DIAMOND WIRE: can square blocks upstream of primary saws and/or cut slabs and profiles for monumental and ornamental use. In versions for both marble and granite. Electric motor or Diesel engine.
Pneumatic & hydraulic drilling machinesDrilling machines and block cutters for all types of vertical and horizontal line drilling operations.
Heavy duty chain saws for sedimentary stones;
for both vertical and horizontal cuts.
QUARRY Saws & Drills
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.08154
DF AmericaEconomical version requested by customers in America who want the same quality with availability...
DF 2000DF 2000-2500-3000-3500Single wire saw for dressing blocks and cutting slabs...
PELLEGRINI Single-WireSl
abbi
ng
Single wire saws Used mainly for dressing and squaring blocks and for cutting slabs of any thickness.
Pellegrini’s features such as large diameter flywheels and the patented hydraulic tensioning system (which provides a more consistent wire tension) are still there. Keeping a consistent tension results in precision cutting and increases the life of the diamond wire. Reducing the cost of replacing wire adds significant overall value.
• Robust metal structure with extremely rigid box section beam• Tubular columns with 2 V-guides each• Big flywheels allow a useful cutting height of 2200-2350mm• Control board PLC and touch screen • Inverters control speed (0-40m/s), up/down movement, and block carriage.
DF America Roller/Gantry Version also available.
• Top Inverter or Fixed Wire Speed
• Two main large diameter flywheels (250 or 200cm, depend-ing on maximum cutting height needed) to maximize the cutting speed and the life of the diamond wire. The wire tensioning system is hydraulic.
• Fitted with a fully electronic control and tensioning system and with a PLC for automatic slabbing.
DF JOLLYSingle wire saw for dressing blocks, but fitted with a 2-axis CNC system that enables cutting of two-dimension profiles as well as slabbing.
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 5
SINGLE-WIRE MACHINESProudly sold here exclusively in North America.
Slabbing/Shaping
Diamantfil DF 1200 Jolly“Jolly” version adds profiling capability• Splitting, Horizontal, Vertical cuttings• 2 Dimensional shaping• One machine solves all your needs• Fixed & Gantry versions available
Pictures courtesy of Idaho Granite Works
Diamantfil DF 1200 SHVMultifunction stationary diamond wire saw• Stone panels• Slab Splitting• Horizontal & Vertical cutting• block dressing squaring• production of slabs from one dimension stone block.
Heavy rigid structure, equipped with 20 ton block trolley.Gantry version also available.
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.08156
PELLEGRINI Multi-WireSl
abbi
ng
Multiple wire saws To cut multiple slabs of thickness of usually 2 (¾˝) or 3 cm. Various machine versions available for 2 to up to 72 wires.
Double TopStationary diamond wire machine performs two parallel cuts at the same time. For slabbing, block squaring, and dressing. Thickness range from 21mm-601mm (231/2).
Four wheels 2350mm diameter. Wire speed can be adjusted from 0-40m/s.; tensioned by an electro-mechanic actuator, useful stroke is 0.6m. PLC control system. Also available in Gantry version.
• AT version has quick
thickness change!
Pentawire 5/5
Patented “Multipull” bearings for independent tensioning of each wire.
Pentawire 5/5• Multiwire system combines
production and flexibility• Equipped for up to 5 diamond wires• Up to 5 diamond wires• PLC control system• Cuts either “cm” and “inch” sizes• Available in fixed and Gantry version
• Multiple slabs in one cut
• Multiple thicknesses
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 7
MULTI-WIRE MACHINES
Polywire 5/16Polywire 5/34• Multiple wire gang-saw to cut slab thick-
nesses from 2cm (¾˝). • Double series of 2.35 meter diameter
flywheels with independent tensioning • computerized control system for cutting
and block-carriage shift operations.• PLC & CNC system.
Slabbing
Polywire DECAWIRE• Pellegrini’s DECAWIRE: 10 wires for thin and thick slabs!• Easy & fast thickness adjustment• 10 slabs from 2-10cm (3/4˝ to 4˝)• Big wheels offer lower stress for longer life of diamond wire• Low energy & low water consumption
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.08158
Polywire 5 SThis 5 diamond wire system combines
production, flexibility and accuracy. Thicknesses ranges between 2.1-14.5 cm.
Cuts either “cm” and “inch” sizes. Computer controlled.
Uses guide wheel or guide drum.
Polywire 54This multiwire adds to the range while keeping the same features – large diameter motor drum and tensioning flywheels to run the diamond wires at peak performance; in results and longevity – also other innovations you’d expect from Pellegrini experience and ingenuity.Process blocks up to 1.5m deep in one shot, while slab thicknesses can be mixed.
PELLEGRINI Multi-WireSl
abbi
ng
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 9
ShapingSHAPING MACHINES
Robot Wire Profiling
Single and multiple wire profiling machinesSystems for cutting two and three dimensional profiles using diamond wire, entirely CNC controlled on 2, 4 , 6 or 7 axes. Available in vari-ous versions as to the useful cutting dimensions needed and the number of profiling wires required.
Robot WireMachines for cutting two and three dimensional profiles, using Diamond Wire. Entirely controlled by 4 or 6 axes CNC systems.
Robot Wire EVOWith CNC system, seven axes controlled for wire inclination up 22.5° allows a wider variety of shapes. Cuts 2D & 3D profiles out from blocks of marble,
granite and ornamental stones (up to 2.6 meters width and 1.7 meters high.)The distance of the guide-wheels from the block, the angles of inclination,
and the controlled tension of the diamond wire grants the maximum cutting precision and optimized performance.
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081510
Surf
acin
gSURFACING
FB 80 - FB 220Can be supplied in versions for single or multiple functions, with any combination of the various surface processing operations (bush-hammering, flaming, sand-blasting).
Surface Treatments Marmomacchine
• Bush Hammer • Flaming • Water Storm • Sand Blasting
‘WATERSTORM-MASTER’ is the range of equipment needed for a type of rough-surfacing process for granite, some types of marbles and nat-ural stones, and other construction materials. A high pressure water jet directed at the surface produces cavities of variable depth. Detaches the weaker parts of the stone surface; making the roughness obtained
dependent on the structure and composition of the material itself. The treated surface has a natural rough appearance and both the color and the structure of the stone are highlighted by this operation. The system is supplied complete with all you need to connect and start the entire plant. On request, the entire plant can be connected to a PC-PLC control system: all functions are monitored and both data and diagnostics are visualized on the PC screen.
MARMOMACCHINE PELLEGRINI has always been a world leader in machines, plants and equipment for rough surface finishing of Marble, Granite, natural/artificial stones, and pre-cast concrete products. - Plants for bush-hammering, flaming, sandblast-
ing and scarification (Waterstorming) with high pressure water
- Plants for special rough-finishing operations (grooving, chiseling, grinding, aging)
- Plants for curb-stone processing- Plants for washing drying and brushing strips
and/or slabs
Automatic and semi-automatic systems for handling slabs and strips: roller con-veyors, carriages, robots, turntables; slab tippers, rotating platforms - Dust absorbers with water abatement - Sound-proof cabins- Safety systems for processing plants, to protect the working area of automatic
machines.
FBS 220
FBS 80
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 11
Surfacing PadHead™ | LUPATO heads & plates
Surface Treatments Marmomacchine
• Bush Hammer • Flaming • Water Storm • Sand Blasting
PadHead™ Polishing & Grinding HeadsMiles Supply’s PadHead™ polishing & grinding head is the most unique tool on the market for surface treatments. The PATENTED multiple free rotating heads work off of the resistance of friction to accomplish its superior surface cutting action. Up to 50% faster using diamond pads than traditional abrasives or plates! Hone, polish, or texture surfaces on your CNC or other applications..
Low-Profile Model II
Model I
Model C
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081512
DONATONI Zenit Po
lishi
ng
Zenit can polish, grind, brush and also drill and cut rectangles or curves along with reliefs and engraving!
The 3 interpolated axis electro spindle mono-head has an automatic tool changer.
Max number of interpolated axes N° 3
Carriage stroke axis X mm 3500
Bridge stroke axis Y mm 2000
Vertical stroke of the head axis Z mm 370
Working table dimensions mm 3500 x 2000
Motor power Kw 17 S6
TOOLS rotation with inverter rpm 0/6000
Max speed axis X mt. / min. 0 – 35
Max speed axis Y mt. / min. 0 – 25
Standard voltage volt/hz 400/50
Approx total weight of the machine kg 3700
• Polish• Hone• Calibrate• Brush for antique finishes!
Zenit is supplied with a 10 position tool storage for ISO 40 cones that can hold 300mm abrasives plates for polishing and calibrating. Ingenius internal and external cooling allows for various tooling.Surface treatment of marble, granite, engineered stone with 10 postion automatic tool changer.
perimeter longitudinalmeander
oblique meanderwithin rectangular perimeter
circular movementwithin variable radius
cross meander
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 13
INTERMAC - Work Centers & WaterJet
Intermac Master 850-1200Master 850 and Master 1200 are the new Intermac work centers for the machining of stone blocks.Expanding beyond stone slabs toward higher thicknesses which requires reliable and high quality work tools. Master 850-1200 answers this need with a sturdy hi-tech 5 axes head that can execute from the most complex machining (fountains, monuments, bath tubs, handrails and column capitals) to kitchen tops. Optional lathe widens the range of possible machining up to include columns and statues with a high degree of complexity.Solid software easily guides the machine operator with the most complex shapes.
• Basic Programming (geometry, milling, drilling, cutting) • Parametric programming (tying objects together through formulas and conditions) • Programming of 3D models (Engraving, carvings, curved surfaces, 5-axis interpolation) • Imports from other software
Intermac Primus Waterjet for Stone• Simple to use, offering reduced maintenance and high
productivity.• Waterjet machine for cutting stone, glass applications,
non-metallic alloys, titanium, aluminum, and ceramic materials.
• Cutting with about 60,000 psi • Hydraulic intensifier pump.
Intermac
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081514
Since 1959, Donatoni Macchine of Italy has been involved in the production of granite and marble. With years of experience behind Donatoni’s reputation and expertise, Donatoni offers innovative, practical ideas and solutions in the design of marble and granite processing machines.
Donatoni Machine Jet Echo Sprinter ST/TOP Kronos Rapid Quadrix*
Quadrix Chart pg 15
Max # of Interpolated axes 5 5 5 5 5 5
Carriage Stroke X-axis 3800mm 3600 3600 3600 3800 3800-4100
Carriage Stroke X-axis 3800mm 3600 3600 3600 3800 3800-4100
Up-down head stroke Z-axis 400mm 370 470 420 650 800-1600
Disc head rotation C-axis 0° / 370° 0°/370° 0° / 370° 0° / 370° 0°/540° 0°/540-+/- 540°
Disc head tilting movement A-axis 0° / 90° 0°/90° 0° / 90° 0° / 90° 0° / 90° 0° / 90° – -20°/200°
Platform dimensions 3800x2400 2000x3500 2000x3500 1900x3500 3500x2000 3500x2000
Min. disc diameter 400mm 400 400 400 400 500
Max disc diameter 625mm 625 725 625 900 900-1200
Max cutting thickness 200mm 200 250 200 300 330-450
Electro-spindle motor power 17 / S6 Kw 17.6/24-S6 17.6 /S6 13/S6 25/S6 25/S6 – 31/ S6
Tools rotation with inverter 0/2400 or 0/6000Rpm
0/2400 (ST) or 0/6000(Top) 0/9000 0/7000 0/7000
Tool connection cone ST-none Top – 40 40 40 50 ISO
Max speed carriage X-axis 0 -35 mt / min 0-30 0-30 0-35 0-40 0-40
Bridge movement max speed Y-axis
0–35 mt / min 0-30 0-30 0-35 0-40 0-40
Head movement max speed Z – axis
0–6 mt / min 0-6 0-6 0-7 0-13 0-13
X Y axes positioning at max speed 0–35 mt / min 0-30 0-30 0-35 0-40 0-40 – 0-13
Water Consumption 40 Lt / min 40 40 50 50 50-70
Air consumption 6 Lt / min 2 2 50 10 10-20
Standard voltage 400 / 50 Volt / Hz 400/80 400/50 400/50 400/50 400/50
Total weigh standard machine 4500Kg 4000 4400 4500 7000 7000-13000
- Jet - Echo - Sprinter - Kronos - Rapid - Quadrix
Donatoni sets the gold standard for manufacturing numeric control machines and has a modern and fully equipped workshop and a large spare parts warehouse.
Donatoni’s diverse lineup of 5 interpolated axis machines can solve any of your sawing and profiling needs. Blade sizes range from 400mm up to 2000mm.
From Interior and Exterior Coverings, Kitchen and Bath Tops, Stairs, Flooring, to Low and 3D* Reliefs. (*Quadrix can do statues)
Specialty Productions: Shaping and excavating with mill-ing tools, shaping blocks with disks to create products with complex shapes and large sizes, turning columns, sculpting statues.
Slab cutting, circular, oval, rectangular, and square internal cuts with end mills. Polished recesses, inclined surfaces using the proper tools. Drilling and excavating blocks with cub wheels or breaking wheels. Low reliefs and engravings.
Cutt
ing/
Shap
ing
DONATONI Family of Saws
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 15
Jet / Echo / Sprinter / Rapid
ECHO options:ECHOMOVE– suction unit moves workpieces during the cutting phasesECHOBELT– table & conveying belt moves slab loading to unloading ECHOTWIN– 2 motorized tables enter/exit cutting area automatically
Numerical control cutting centers with 5 interpolated axes for cutting slabs of natural and artificial stone. Machines with swiveling disk head. Movements interpolated with the other 3 machine axes (bridge, carriage, disk lift/lowering).
Sprinter options:Diamond-studded disk“TOP” version optional ISO40 motorDiamond-studded tools such as: end mill, digging wheel, horizontal disk to perform a variety of work processes. Fixed no-rotation slab bench with rocking slab support table to make it easy to load the slab.
Cutting/Shaping
RAPID 900 CNC cutting center with 5 interpolated axes for cutting slabs of natural and artificial stone.
- Optional fixed no-rotation slab bench with rock-ing slab support table for easier loading;
- “TOP” version has optional ISO40 motor.
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081516
DONATONI Kronos
KRONOS CNC Cutting Center with 5 axes• 5 interpolated axes with automatic tools change.• Electrospindle ISO40, KW13/rpm9000, can be equipped
with a diamond-studded disks/tools. • Can be mounted on an enbloc or concrete wall.• Fixed/tilting table with aluminum top, removable table
cover with slab support top in wood, vacuum pump and suckers to clamp the workpieces on the aluminum top
• 20 position tool magazine.
Cutt
ing/
Shap
ing
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 17
Quadrix DV & DG
Quadrix Machine Measure Quadrix DV
Quadrix DG 1000
Quadrix DG 1200
Quadrix DG 1400
Quadrix DG 1600
Quadrix 2000
Max # of Interpolated axes # 5 5 5 5 5 5
Carriage Stroke X-axis mm 3800 3950 4100 4100 4100 4100
Bridge stroke Y-axis mm 2700 2900 3600 4500 3600 4500
Up-down head stroke Z-axis mm 800 1000 1200 1400 1600 2000
Disc head rotation C-axis Degrees 0°/540° 0°/540° 0°/540° 0°/540° 0°/540° 0°/540°
Disc head tilting movement A-axis Degrees 0° / 90° -20°/200° -20°/200° -10°/190° -20°/200° -20°/200°
Platform dimensions mm 3500x2000 3500x2000 3500x2000 2000x3500 3500x2000 3500x2000
Min. disc diameter mm 500 500 500 625 625 625
Max disc diameter mm 900 1000 1200 1200 1200 1200
Max cutting thickness mm 330 350 450 450 450 450
Electro-spindle motor power Kw 25/S6 31/S6 31/S6 31 / S6 31/S6 31/S6
Tools rotation with inverter Rpm 0/7000 0/7000 0/7000 0/7000 0/7000 0/7000
Tool connection cone ISO 50 50 50 50 50 50
Max speed carriage X-axis mt / min 0-40 0-40 0-40 0–40 0-40 0-40
Bridge movement max speed Y-axis mt / min 0-40 0-40 0-40 0–40 0-40 0-40
Head movement max speed Z-axis mt / min 0-13 0-13 0-13 0-13 0-13 0-17
X Y axes positioning at max speed mt / min 0-40 0-40 0-40 0-40 0-40 0-40
Water Consumption Lt / min 50 70 70 70 70 70
Air consumption Lt / min 10 20 20 20 20 20
Standard voltage Volt / Hz 400/50 400/50 400/50 400 / 50 400/50 400/50
Total weight standard machine Kg 7000 13000 13000 12000 13000 13500
QUADRIX for processing marble or granite blocks to make: shaping, excavations, spiral columns, sculptures, engravings and cuts.
Equipped with an electric spindle, can use diamond-studded disks/tools/bits such as: end mill, digging wheel, horizontal disk. Can be equipped with a lathe and a swivel thrust bearing, both with numerical controlled rotation axes.
Use QUADRIX for restoration work and for work processes such as:- Shaping and excavating with milling tools.- Shaping blocks with disks to make
complex shapes and large sizes.- Disk cutting of slabs and blocks.- Turning columns with profiled shapes and
shallow processing of columns along the generatrix.
- Sculpting of statues.
Cutting /Shaping
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081518
DONATONI SX-3 CNCD
onat
oni
SoftwareISOSAG: creates shaping files, to be installed on the machine’s computer and visualized on the touch screen. Technical design program to perform shaped profiles on marble and granite work pieces; linear or arc shaping. (pictured right)
PARAMETRICS: For planning of parametrical drawings of kitchen tops, stairs or any kind of linear shape (no curves). The program is able to import DXF file for cutting linear shapes. Included software for the acquisition of the cutting area of the slab by the optional laser supplied with the machine. (pictures on page 9)
DDX EASYSTONE: Software for up to 5-axis machining. Technical drawing program specialized for marble, granite and natural stone processing by means of numeric control machines and developed for the application on cutting centers Donatoni Macchine. The soft-ware is the solution to process cut to size of complex form in CAD Development ambience. The software allows import of IGES, PNT, STL, DXF files and elaboration and transformation in ISO files.
Remote Assistance: enables our technicians to test possible generated errors and to check if the inserts parameters in programs are correct.
ISOSAG
EASYSTONE
Multi-spindle CNC cutting center with rotating spindles
Donatoni’s new technology makes the SX-3 incredibly productive, flexible, and fully optimizes slabs with ease!
Highly advanced software uses scans to optimize each slab, resulting in reduced processing time and mate-rial waste. Automatically calculates for defects and also manages the autoloader, cutting, and unloading belt.
Huge production in little space!
Donatoni OPTIONS
SX-3 Machine# of NC controlled / interpolated axes 11 / 7
Carriage Stroke X-axis 4000 mm
Bridge Stroke Y-axis 2800 mm
Vertical stroke of the head Z-axis 200 mm
Rotation spindles bridge -182°/+182°
Spindle tilting movement A-axis 0°/+47°
Minimum/maximum distance between the blades 80/1400 mm
Maximum suction cups lift capacity 600 kg
Belt cutting dimensions 2400 × 6600 mm
Unloading belt dimensions 2400 × 4100 mm
Maximum/Minimum blade diameter 400/300 mm
Max cutting depth 110 mm
Electrospindle motor power 13/56 kw
Disc rotation with inverter 0 giri / 3000 min
Shaft diameter of the spindle motor 40 mm
Max speed X-axis 40 mt/min
Max speed Y-axis 40 mt/min
Max speed vertical stroke of the head Z-axis 8 mt/min
Max speed of axes X Y 40 mt/min
Max conveyor belt speed 15 mt/min
Water Consumption 100 lt/min
Air consumption 2 lt/min
Standard voltage 400v / 50hz
Total power installed 55/56 kw
Approx total weight of machine 18,500 kg
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 19
Belt Options
Move System
Lathe: Metal structure, axis rotation by means of numeric control for the execution of columns at circular section and with complex forms. Rotation movement is generated by a brushless motor and precision reduction gear.
DONATONI Options
Table Options Wood Over Bench
Tilting Table
Slotted Aluminum Table
Tool Presetting: System allows for detection of the tool size, updating the library in the machine control unit.
Slab Thickness Detector: System for automatic detection of slab thickness.
Disk Changer/Tool Racks: A variety of sizes and configurations of blade and tool racks.
Belt Table
Dual Table
Options
SX-3 Machine# of NC controlled / interpolated axes 11 / 7
Carriage Stroke X-axis 4000 mm
Bridge Stroke Y-axis 2800 mm
Vertical stroke of the head Z-axis 200 mm
Rotation spindles bridge -182°/+182°
Spindle tilting movement A-axis 0°/+47°
Minimum/maximum distance between the blades 80/1400 mm
Maximum suction cups lift capacity 600 kg
Belt cutting dimensions 2400 × 6600 mm
Unloading belt dimensions 2400 × 4100 mm
Maximum/Minimum blade diameter 400/300 mm
Max cutting depth 110 mm
Electrospindle motor power 13/56 kw
Disc rotation with inverter 0 giri / 3000 min
Shaft diameter of the spindle motor 40 mm
Max speed X-axis 40 mt/min
Max speed Y-axis 40 mt/min
Max speed vertical stroke of the head Z-axis 8 mt/min
Max speed of axes X Y 40 mt/min
Max conveyor belt speed 15 mt/min
Water Consumption 100 lt/min
Air consumption 2 lt/min
Standard voltage 400v / 50hz
Total power installed 55/56 kw
Approx total weight of machine 18,500 kg
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081520
ENVIRONMENTAL - Water & DustEn
viro
nmen
tal
Torit® Dust Collectors
Various Dust CollectorsCabinet dust suppression systems which are low energy, compact and adaptable.
Water Treatment Plants by F&BSeparates the waste product & water; recycled water returns for use. Systems eliminate sludge pits/monthly cleaning.
Fraccaroli Balzan Water Treatment Plants
The compact treatment plant at right comes ready to work, with all of the necessary components all in one unit. Measuring 17’ x 7’.5” x 7’.5”, the compact plant is a simple solution to your hard-to-clean sludge pits. We also sell and advise on complete systems (at left).
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 21
9’ Standard Modelautomatic49” horizontal travel43” vertical travel*9’x6’x8’
15’ Modelautomatic
10‘ 2” horizontal travel43” vertical travel*
15’x6’x8’
12’ Modelautomatic
7‘ horizontal travel43” vertical travel*
12’x6’x8’
SandHandlerSandHandler
see demo on
SANDBLASTINGSandblasting
Fully Automatic Sandblast & Recovery System• Stone to Stone feature included• Customize your vertical travel up to 60"• No Pits Needed• No Shoveling• Easy to Use; Easy to Install
* can be customized up to 60"
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081522
MATERIAL HANDLING
BLOCK-TILTING MACHINE to rotate blocks up to 30/50 t. Easily operated by one person.
OVERHEAD CRANES with one or two beams. Pellegrini’s high tech design and construction. Loads from 2 to 50 t.Derrick CraneWith load to 50 ton and jib to 80 mt. Gantry CraneWith load to 70 ton; span and jibs can be on request. Overhead traveling CraneWith capacity to 50 ton and span on request. Special CranesOn request, we build cranes with capacities and structures off size. Top Loader CraneLoading arm device for loading slabs in 20’ box containers
Rotofix
Gantry Cranes
Power options: DC, AC, Air
We’ll help assess the optimal lifter for you. A complete range of self-powered FLT mounted or crane mounted vacuum lifters for handling concrete, stone, marble, granite, slabs, panels. Capacities from 100kgs up to 50000kgs. Single pads, multi-pads, radio control, 90º or 180º tilting. No installation required.
Top Loader
Han
dlin
g
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.0815 23
SHORTAGESAfter receiving your order from Miles Supply, please confirm immediately that all items (excluding back ordered items) were received. Miles Supply will not accept claims for missing merchandise filed over 2 business days after receipt.
COMPRESSORS
Portable & Stationary
Compressors
Rotofix
LIABILITYMiles Supply, Inc. (hereinafter collectively referred to as Miles Supply) hereby state that all products, merchandise and equipment sold and delivered are sold with NO warranties, express or implied, including any warranties of fitness or suitability for a particular purpose. Except Miles Supply shall honor all manufacturer’s warranties, if any, for the replacement of defective products, merchandise or equipment. Such replacement shall be made according to the manufacturer’s terms, conditions and specifications. Miles Supply shall not be liable for any loss, damage, or injury, whether direct, consequential or incidental arising out of the use or inability to use such a product, merchandise or equipment. Buyer bears sole responsibility for determining the suitability of the product, equipment or merchandise for its intended use and hereby assumes all risk and liability for its selection and use and agrees to hold Miles Supply harmless therefrom. No modification of this limited warranty shall be effective unless made in writing and signed by a duly authorized officer of Miles Supply.
CREDITStandard* orders shipped C.O.D. unless credit has been approved or the order has been prepaid by either a credit card+, money order or wire transfer. All first time orders over $200 must be paid by bank check or money order. +Credit cards cannot be used for extraordinarily large purchases.
TERMS*For machines: 30% down, 60% upon readiness to ship, 10% at install is typical. Terms vary depending on Vendor. Non-Machine supplies are net 30 days with approved credit. A service charge of 1½% (18% per year) will be added to accounts over 30 days. Any and all collection fees will be in addition to amounts owed to Miles Supply. Special terms or conditions must be approved by an officer of Miles Supply prior to your order being processed.
PRICESAll orders are shipped F.O.B. from either Miles Supply’s Barre Vermont or Elberton Georgia location. Some orders may be shipped directly from the manufacturer to the customer if requested from the customer.
RETURNSA return merchandise authorization (RMA) number must be issued by Miles Supply before an item is to be returned. Miles Supply will not accept collect shipments on returns unless they have been pre-authorized. A 15% restocking fee may be applied to all returns. Authorization for returns must be made within 45 days of receipt of the order. No returns on special orders. All defective merchandise is subject to Vendor’s inspection.
DAMAGESClaims for damaged goods must be filled with the carrier immediately. In addition, Miles Supply must be notified of the claim within 2 business days. Miles Supply is not responsible for damages by carriers. Please check your shipment thoroughly upon arrival.
RETURN FOR REPAIR OR REPLACEMENTMiles Supply is limited to a manufacturer’s warranty specifications. In certain cases, we may not be able to either issue an immediate credit or warranty repair until the manufacturer gives approval. Misuse is beyond our control and may ultimately void the manufacturer’s warranty.
STOCKINGMiles Supply can not guarantee that all items listed in this catalog are always in stock or available. Miles Supply will make every effort, though, to fill your order in a timely manner.
TERMSCom
pressors
VT: 800.396.8049 GA: 888.283.5863 www.milessupply.com PA: 888.278.8383 MN: 800.789.081524
Miles Supply, Inc.143 Boynton Street
Barre, VT 05641
800.396.8049
Miles Supply, Inc.1599 Hartwell Highway
Elberton, GA 30635
888.283.5863
Miles Supply, Inc.96 Ellsworth Drive
Montrose, PA 18801
888.278.8383
Miles Supply, Inc.1660 West Broadway St.
Rockville, MN 56369
800.789.0815
©2016
milessupply.com
TX: 214.470.3355