MiniTec Conveyors[1]

8/8/2019 MiniTec Conveyors[1]

1/22

00.0028/

0

BELT CONVEYORS

TURN-KEY SOLUTIONS BELT CONVEYORS AN D ROLLER CON VEYORS

MINITEC PROFIL SYSTEM28 6


2/22

00.0104/

0

BELT CONVEYOR

The belt conveyor module in our MiniTec CADmenue construction software designs your belt conveyor auto-matically according to your requirements. Furthermore it calculates the deflection, suggests the number ofsupports and generates the respective part list - within a few minutes. Assembly can be carried out quicklyand easily as a result of our proven components.

Motor arrangement

Subconstuctions

Plug-on motor Flanged motor

Height-adjustable Standard

TURN-KEY SOLUTIONS BELT CON VEYORS AN D ROLLER CON VEYORS

MINITEC PROFIL SYSTEM 28 7


3/22

00.0105/

0

REQUEST FOR OFFER: BELT CONVEYORS AND ROLLER TRACKS

Standard dimension

Axial distance A mm

Belt width L mm

Conditions of usage

Goods to be conveyed

Weight/piece kg

Total belt load kg

Temperature C

Subconstuction

Charging side height He mmDischarging side height Ha mm

Number of supports Pcs.

Height adjustable sup. from mm to mm

No. of lateral guide support Pcs. (max. distance: 1000 mm)

Lateral guide one side both sides

Floor anchor Yes No

Rollers Yes No

Feet Yes No

Options

Belt PVC PU

Supporting sheet Aluminium Inox

Drive

Motor arrangement Flanged Plug-on motor

Motor Type Part no.Speed m/min.

Adjustable speed from m/min. up to n m/min.

Company Please call me back

Name Please send me an offer

Phone no.

Fax no.




4/22



Part N29.5030/ 0M OTOR ATTACHM ENT KIT 16

TECHN. D ATA/ I TEM S SUPPLI ED APPLI CATI ONS ASSEM BLY

- Motor plate and cover, steel, powdercoated, grey

- Housing with self aligning

- Chain wheel bored for motor-shaft 16

- 2 chain wheels with driving chain

- Fixing kit

Weight 3,060 kg

- Belt-conveyors made of MiniTecaluminium profiles

- Suit able for att achment of spur wheelback-geared m otors; flange 120 m m

- Belt driving cylinder Part N 29.5022/ 0and belt tensioning cylinder Part N21.0994/ 0

- Screw flange plate on basic frame;mount housing w ith b earing

- Insert belt driving cylinder; on theopposite side use conveyor bearingPart N 21.0993/ 0

- Mount motor and chain wheels andtension chain

- M ount cover

Part N29.5031/ 0M OTOR ATTACHM ENT KIT 20


- Motor plate and cover, steel, powdercoated, grey

- Housing with self aligning

- Chain wheel bored for motor-shaft 16

- 2 chain wheels with driving chain

- Fixing kit

Weight 3,060 kg

- Belt-conveyors made of MiniTecaluminium profiles

- Suit able for att achment of spur wheelback-geared m otors; flange 120 m m

- Belt driving cylinder Part N 29.5022/ 0and belt tensioning cylinder Part N21.0994/ 0

- Screw flange plate on basic frame;mount housing w ith b earing

- Insert belt driving cylinder; on theopposite side use conveyor bearingPart N 21.0993/ 0

- Mount motor and chain wheels andtension chain

- M ount cover


5/22



Part N29.5001/0SW IVEL PLATE

TECH N. DATA/ I TEM S SUPPLI ED APPLI CATI ONS ASSEM BLY

- Steel, powder coated, grey

- Fixing kit

Weight 0,377 kg

- Attachment of the subconstruction onMiniTec belt conveyor

- Also suitable for inclined belt conveyors

- The swivel plate is also used as acounterbearing t o t ighten t he belt

- Range: 35

- Fasten at the conveyor profiles at thesubconstruction w ith fixing kit fromsupply schedule

Part N29.5002/0SUPPORT ROLLER KIT


- Support roller kit, PVC

- Ball bearings on both sides

- Two profile supports

- 2 mount ing angles

- Fixing kit

Weight 0,487 kg

Please specify dimension L (belt width)

- MiniTec belt conveyor systems

- As a support for t he lower side of longbelt conveyors

- We recommend to install one supportroller for each intermediate support onthe belt conveyor

- Use this support roller kit only with beltwidth > 115 mm

- Preassemble the profile roller supporton t he conveyor suppor ts; use theangles

- Clip the support roller in fixing kit

- Slide the roller in appropriate positionand tighten the screws


6/22



Part N21.0994/ 0BELT TENSIONING CYLINDER 45


- Aluminium

- Turned spherically

- Journal 17

Weight 4,800 kg/ m



- Use suitable conveyor bearing Part N21.0993/ 0

- Insert t he axle in the conveyor bearingassembly bore

- The cylinder is fixed axially by the self-aligning ball bearings

- The self-alignin g b all bearingscompensate light misalignments

Part N21.0995/ 0BELT DRIVING CYLINDER 45


- Steel, zinc-plated


- Journal max. 17

Weight 15,300 kg/ m

Please indicate belt width L anddimensions A, B, C, D and E (if < 17 mm)


- Use suitable conveyor bearing Part N21.0993/ 0

- Insert belt driving cylinder in conveyorbearing wit h bore Part N 21.0993/ 1

- Mount on opposite conveyor bearingPart N 21.0993/ 0



7/22


8/22



Part N21.0982/ 0BELT TENSIONING CYLINDER 90


- Aluminium with shaft made of steel


- Axle 25

Weight 15,800 kg/ m



- Use suitable conveyor bearing Part N21.0985/ 0 0

- Insert axes in the bore of the self-aligning bearings of t he conveyorbearing

- The cylinder is fixed axially by the self-aligning ball bearings


Part N21.0981/ 0BELT DRIVING CYLINDER 90


- Aluminium with shaft made of steel


- Axle max. 25

Weight 16,200 kg/ m

Please indicate belt width L anddimensions A, B, C, D and E (if < 25 mm)


- Use suitable conveyor bearing Part N21.0985/ 0 and Part N 21.0985/ 1

- Insert belt driving cylinder in conveyorbearing wit h bore Part N 21.0985/ 1 0

- Mount on opposite conveyor bearingPart N 21.0985/ 0 0



9/22



Part N21.0993/0CONVEYOR BEARING 45


- Aluminium GD, powder coated, grey

- Self-aligning ball bearing with 17mm, both sides sealed

Weight 0,275 kg


- Bearing for belt-tensioning cylinders - Pretighten at the profile groove

- If swivel plates Part N 29.5001/ 0 forsupport fastening are used, they serveas counter bearing for tighteningpurpose; if not, use multi block orangles

- Tighten the conveyor belt byunscrewing the set screw, if necessaryreset the tool as often as needed

- Firmly tighten the conveyor bearing

- Recommended locking torque: 25 Nm

Part N21.0993/1CONVEYOR BEARING 45 W ITH BORE



- With bore for shaft end (add on motor)

- Self-aligning ball bearing with bore 17 mm, both sides sealed

Weight 0,268 kg

- Bearing for belt-tensioning cylinders

- Attachmant of plug-on motors or chainwheels on shafts; max. 17 mm

- Pretighten at the profile groove

- If swivel plates Part N 29.5001/ 0 forsupport fastening are used, they serveas counter bearing for tighteningpurpose; if not , use mult iblocks orangles



- Recommended locking torque: 25 mm


10/22



Part N29.5029/ 0CONVEYOR BEARING 4 5 FOR PLUG ON M OTOR



- Self-aligning ball bearing 17 mm,both sides sealed

- With thread M8 for torque support

- Fixing kit

Weight 0,269 kg

- MiniTec belt-conveyors with plug onmotor (hollow shaft)

- Fasten the torque support on thread M8- Preassemble conveyor bearing at profile

end- If swivel plates Part N 29.5001/ 0 for

floor fastening are used, they serve ascounter bearing for tightening purpose;if not. use multiblock or angles

- Tighten the conveyor belt byunscrewing the set screw , if necessaryreset the tool as often as needed

- Firmly tighten the conveyor bearing- Recommended locking torque: 25 Nm

Part N21.0985/ 0CONVEYOR BEARING 90



- Self -aligning ball bearing with bore 25 mm, both sides sealed

Weight 0,900 kg

- Bearing of belt-tensioning cylinders 90in M iniTec belt-conveyors

- Preassemble conveyor bearing at profileend

- As counter bearing for tightening ofconnection plate 32 x 90 or 45 x 90

- Tighten the conveyor belt byunscrewing th e set screw, if necessaryreset the tool as often as needed




11/22



Part N21.0985/1CONVEYOR BEARING 90 W ITH BORE



- With bore for shaft end (add on motor)

- Self-aligning ball bearing with bore 25 mm, both sides sealed

Weight 0,900 kg

- Bearing of b elt driving cylinders inMiniTec belt-conveyors

- Attachment of motors, chain wheels orbelt pulleys on shaft, max 25 mm

- Preassemble conveyor bearing onprofile end

- As counter bearing for tightening useconnecting plate 32 x 90 or 45 x 90




Part N29.5010/0SUPPORTING SHEET


- Aluminium, anodized

- Thickness: 2 mm

- bored, ready for use

Weight 5,400 kg/ m 2

- Support for conveyor belts

- For MiniTec conveyor systems

- Screw with counter sunk screws M6 x16 and square nut M6 on profile


12/22


13/22



Part N29.5024/0LATERAL GUIDE


- Aluminium , E6/ EV1

- Sliding profile PE

Weight 0,414 kg

- Adjustable lateral guide for M iniTec beltconveyors

- Recommended lengt h: axial di stance A+ 40 mm

- Other designs on request

- Slide the M8 square nuts with springsteel sheet into the groove

- Screw th e lateral guid e on the distancebolt

- Secure plastic rail with square nut andset screw, bore requested

Part N29.5025/0LATERAL GUIDE SUPPORT 70

TECH N. DATA/ I TEM S SUPPLI ED APPLI CATI ONS

- PA 6 GF, grey

- Distance bolt , stainless Steel

- Securing against torsion AL GD

- Fixing kit

Weight 0,137 kg

- Adjustable lateral guides for MiniTecbelt conveyors


- We recommend: approx. 500 mmdistance between the supports

- Fasten support on lateral profiles

- Set the height H and tighten the screws

- M ount t he lateral guide Part N29.5024/ 0

- Adjust lateral distance bolt


14/22



Part N29.5028/ 0LATERAL GUIDE SUPPORT 140

TECHN. D ATA/ I TEM S SUPPLI ED APPLI CATI ONS

- PA 6 GF, grey

- Distance bolt, stainless steel

- Securing against torsion AL GD

- Fixing kit

Weight 0,142 kg

- Adjustable lateral guides for MiniTecbelt conveyors


- We recommend: approx. 500 mmdistance between t he supports

- Fasten support on lateral profiles

- Set the height H and tighten the screws

- M ount t he lateral guide Part N29.5024/ 0

- Adjust lateral distance bolt

Part N21.1056/ 0BEARING ASSEM BLY FOR TRANSPORT ROLLERS


- Housing PA with slide-bearing

- Axle bolt, steel

- Roller support, PA 6

- Fixing kit

- For transport rollers of 60 - 1000 mm

Weight 0,420 kgLoad max. (roller) 20 kg

- Roller conveyors at any length

- Drive via round belt 5 mm possible

- The rollers can be replaced individually

- Attachment of the roller support on allprofiles possible

- M ount roller support

- Press bearing assembly into the tube

- Insert axle bolt

- Clip in transport roller


15/22



Part N21.1722/0BEARING ASSEM BLY S


- Housing steel wi th ball bearing

- Securing clip, steel

- Roller support, PA 6

- Fixing kit

- For transport rollers of 60 - 1000 mm

Weight 0,420 kgLoad max. (roller) 33 kg

- Roller conveyors at any length


- Attachment of the roller support on allprofiles possible

- Mount roller carrier

- Press bearing assembly into the tube

- Insert shaft 8 and secure withsecuring clip

- Clip in transport roller

Part N21.1050/7DRIVING BELT PU


- PU, green

- = 5 mm

- Length = 550 mm

- Drive of t ransport rollers via groove inbearing assembly

- Usuable with bearing-assembly onlyPart N 21.1056/ 0

- Strip driving belt over driving shaft

- Lay driving belt in groove of transportroller

- Bind rollers at insufficient p laces withdriving belt NBR Part N 21.1050/ 1 toPart N 21.1050/ 6 ; see page 301

- Clip roller in roller support


16/22



Part N21.1050/ 1DRIVING BELT NBR


- NBR, black

- = 5 mm

- A = 80 mm

For other length see selection table onthe right

- Att achment of t ransport rollers atinsufficient places via groove in bearingassembly f rom roller to roller

- Insert belt in g roove of the first ro llerand clip roller in the bearing

- Strip belt over second roller and clip inroller support

Part N50.0128/ 0SUPPORT BEARING 20


- Pillow block, steel, zinc-plated

-Fixing kit

- Bore 20 m m

Load:dyn. C 975 N

Weight 0,190 kg

- Driving of roller-conveyors with drivingbelts

- With fixing kit from supply schedule

- Lead shaft trough bearing and securewith set screw


17/22



Part N21.1717/0TRANSPORT ROLLER PVC


- Completely mounted transport roller,PVC-tube

Please indicate dimension L

- Producing of roller conveyors with orwithout drive

- Drive possible via driving b elt 5mm


- Clip in roller support

- As roller support we recommend doorcatch Part N 21.1756/ 1

Part N21.1716/0TRANSPORT ROLLER AL


- Transport roller completely assembled,Alu-tube


- Producing of roller conveyors with orwithout drive

- Drive possible via driving b elt 5mm



- As roller support we recommend doorcatch Part N 21.1756/ 1


18/22



Part N21.1719/ 0TRANSPORT ROLLER S PVC


- Transport roller completely assembled,PVC-tube

- With ball bearings and shaft


- Producing of roller conveyors wit houtdrive


- As roller support w e recommend doorcatch Part N 21.1756/ 1

Part N21.1718/ 0TRANSPORT ROLLER S AL


- Transport roller completely assembled,Alu-tube

- With ball bearings and shaft


- Producing of roller conveyors wit houtdrive


- As roller support w e recommend doorcatch Part N 21.1756/ 1


19/22


20/22

00.0029/

0

LONGITUDINAL STOPS

TURN-KEY SOLUTIONS LONGITUDINAL STOPS



21/22

00.0106/

0

LONGITUDINAL STOPS

MiniTec longitudial stops are proven turn-key solutions based on MiniTec standard elements of the MiniTecprofile system. Its modular structure enables optimum solutions for any kind of application. All stops areequipped with a height-adjustable foot including bores for floor mounting. Connection to the machine viaadaptor plate with fixing bores. Digit al LCD display attached d irectly to the machine at operators height.Simple dimension modifications, e.g. for saw blade thickness or distance between stop and tool can be car-ried out via display

Standard lengths up to 6000 mm(measuring length:5500 mm), other

dimensions on request

Width carrying rollers: 200-600 mm

Distance between carryingrollers: 200 mm

Height adjustment: 100mm

Standard height: 850 mm

Standard connection: right

Length measuring: magnetic tape

Measuring accuracy: 0.15 mm

Measuring display: LCD

Slide guide:Linear guide LR wit h 4 precision bea-

rings, clearance adjusted, shafts 12mm , hardened special steel Cf 53,Mat. no. 1.1213

Slide clamping:Motor drive: automatically at stopposition,manual drive: via switch (pneumatic)or via clamping lever.

Motor drive:AC-motor with positioning controlsystem, integrated in housing. Displa-cement speed: 0.6 m/ s

Input for motor drive:Input terminal with foil keyboard and

LCD-display, fixed in switch-box plateat operator height next to the machi-ne.




22/22

00.0107/

0

Dimensions

Measuring length Lm mm

Roller distance A mm

Roller width B mm

Height H mm

Load dN

Control

Drive motoric handwheel manual

Stop right left

First cuts can easily be carried out:The top of the stop can be swungout of t he conveyor by 180.Adjustable measuring length com-pensation including scale,L = 400 mm, fixed onto slide.

Motorized drive with stationarydisplay, integrated in the switch-box

Manual handwheel drive with sta-tionary 230 V - display

Manual slide displacement withbattery-driven digit al display onslide

LONGITUDINAL STOPS

DATA REQUIRED LONGITUDINAL STOPS


MiniTec Conveyors[1]

Documents

Transcript of MiniTec Conveyors[1]