Minimize Equipment and Costs - Worthington Industries
2
WORTHINGTON’S MULTIWELL BULK AND TEST CONFIGURATION TAKES EQUIPMENT DOWN TO A SIMPLE ONE-SKID/ONE-ENCLOSURE SET UP. THIS MINIMIZES FOOTPRINT, HELPS CUT FREIGHT COSTS AND KEEPS OPERATORS AT PEAK PRODUCTION. Worthington’s bulk and test separator is a three-phase, horizontal configuration with plug and play optimization, handling multiple inlet streams of oil, gas and BS&W. While conventional bulk and test separator setups demand as many as four pieces of equipment and placement of a test separator on each incoming well, our design gets the job done on one skid, with the bulk and test separators sharing one skid and one enclosure. Minimize Equipment and Costs BULK & TEST SEPARATOR UNITS
Transcript of Minimize Equipment and Costs - Worthington Industries
W O R T H I N G T O N ’ S M U LT I W E L L B U L K A N D T E S T
C O N F I G U R A T I O N T A K E S E Q U I P M E N T D O W N
T O A S I M P L E O N E - S K I D / O N E - E N C L O S U R E S E T
U P. T H I S M I N I M I Z E S F O O T P R I N T , H E L P S C U T
F R E I G H T C O S T S A N D K E E P S O P E R AT O R S AT
P E A K P R O D U C T I O N .
Worthington’s bulk and test separator is a three-phase, horizontal
configuration with plug and play optimization, handling multiple
inlet streams of oil, gas and BS&W. While conventional bulk and test
separator setups demand as many as four pieces of equipment and
placement of a test separator on each incoming well, our design gets
the job done on one skid, with the bulk and test separators sharing
one skid and one enclosure.
Minimize Equipment and Costs
B U L K & T E S T S E P A R A T O R U N I T S
R E A D Y F O R B U L K & T E S T S E P A R AT O R S T H AT A R E T R U LY W O R T H I T ? Reach out to Worthington Industries at 800.338.8265 or email [email protected]
B U L K & T E S T S E P A R A T O R U N I T S
B U L K S E P A R AT O R S P E C S
� 60” x 25’
T E S T S E P A R AT O R S P E C S
� 42” x 15’ (includes instrumentation per P&ID)This simplified configuration is designed with one enclosure
covering the end of both vessels and ships as a single legal
shipping load. All while maintaining increased throughput.
� Provides bulk and test on same skid for minimized equipment footprint and simple field installation
� Reduces costs with bulk and test separator set up on the same skid
� Removes unnecessary equipment, freight and labor costs
B U L K & T E S T O U R W A Y
O N E S K I D O N E E N C L O S U R E
INDIRECT HEATED SEPARATOR ADD-ON
Worthington Industries also offers bulk and test units with
an optional SureState™ indirect heated separator. Adding
SureState™ to your bulk and test setup eliminates post-treatment
VRT while still maintaining RVP specs, decreasing liquid
carryover and ensuring that your setup qualifies for state
variances relating to heat input (where applicable). Ask your
rep for details.
