Mini CNG Stations for Home Use
-
Upload
smithkelly52 -
Category
Documents
-
view
436 -
download
1
description
Transcript of Mini CNG Stations for Home Use
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
MINI CNG STATIONS FOR HOME USE:
CNG Compressor is used to compress family micro pressured natural gas to 20MPa, and
Refuel your Natural Gas Vehicle At Home, filling time take about 2-4 hours every time
to fill full 60liters CNG tank. It is small size, safe and simple operation, high reliability
natural gas home refueling appliance.
Model: GE-3/200: 1) Suction Volume Displacement: 3.0 Nm3 / hr ; 1.8 cfm
2) Intake Pressure: 0.0017-0.0035MPa / 0.25-0.5psi
3) Discharge Pressure: 20 MPa 200bar 3000psi / 25 MPa 250bar 3600psi (option)
4) Gas: Natural gas (Not containing sulfur, water and solid particles of more than 20um)
5) Stroke 14mm
6) Rotating Speed: 1200 rpm
7) Compress Stage: 4
8) Gas Feeding Temperature: Ambient temperature +10
9) 1st Stage Discharge Pressure: 0.38-0.48 MPa
10) 2nd Stage Discharge Pressure: 1.8-2.5 MPa
11) 3rd Stage Discharge Pressure: 7.0-8.2MPa
12) Cooling Mode: Air-cooled
13) Motor Power: 2.2 KW/ 3HP
14) Electrical: 220v/50hz, 230v/60hz , single phase
15) Noise Level: 55 dBA
16) Size/Weight: 650 x 810 x 660mm/ 80kg
17) Lubricate Oil: DMC/ HIRI 150, ESSO/ SLG150, BP/ GCS150
18) Filling Time: 4 hours for 60L cylinder at 200bar 3000psi
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
Model: GE-5/200: 1) Suction Volume Displacement: 5.0 Nm3 / hr, 3.0 cfm
2) Intake Pressure: 0.0017-0.0035MPa / 0.25-0.5psi
3) Discharge Pressure: 20 MPa 200bar 3000psi./ 25 MPa 250bar 3600psi(option)
4) Gas: Natural gas (Not containing sulfur, water and solid particles of more than 20um)
5) Stroke 14mm
6) Rotating Speed: 1600 rpm
7) Compress Stage: 4
8) Gas Feeding Temperature: Ambient temperature +10
9) 1st Stage Discharge Pressure: 0.38-0.48 MPa
10) 2nd Stage Discharge Pressure: 1.8-2.5 MPa
11) 3rd Stage Discharge Pressure: 7.0-8.2MPa
12) Cooling Mode: Air-cooled
13) Motor Power: 3 KW/ 4 HP,
14) Electrical: 380v/50Hz, 230v/60Hz, 3 phase
15) Noise Level: 58 dBA
16) Size/Weight: 650 x 810 x 660mm/ 90kg
17) Lubricate Oil: DMC/ HIRI 150, ESSO/ SLG150, BP/ GCS150
18) Filling Time: 2.5 hours for 60L cylinder at 200bar 3000psi
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
Warranty: • 1 year warranty on all components except piston ring, valve plate, built in
filtration element, lubricate oil.
• For routine or unscheduled maintenance note that DMC international technical
service is able to provide you with assistance and spare parts as and when
required
Replacement period: • 2000 hours running life of wearing parts before major re-built compressor.
• 300 hours for lubricate oil. •500 hours for filtration element.
Accessories: • CNG hose
• Spare parts kit (piston ring, fuse etc)
• Regulator, filter
• Filling nozzle 3000psi/ 3600psi
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
CNG COMPRESSOR FOR BUSINESS
Model: GE - 10/200 1) Suction Volume Displacement: 10.0 Nm3 / hr; 6.0 cfm
2) Intake Pressure: 0.0017-0.0035MPa, 0.5psi
3) Discharge Pressure: 20MPa 200bar 3000psi ; 25MPa 250bar 3600psi
4) Compression Medium: Natural gas (Not containing sulfur, water and solid particles of more than 20um)
5) Stroke 90mm
6) Rotating Speed: 680 rpm
7) Compress Stage: 4
8) Gas Feeding Temperature: Ambient temperature +10
9) 1st Stage Discharge Pressure: 0.38-0.48 MPa
10) 2nd Stage Discharge Pressure: 1.8-2.5 MPa
11) 3rd Stage Discharge Pressure: 7.0-8.2MPa
12) Cooling: Air-cooled
13) Motor Power: 5.5 KW/ 7.5HP
14) Electrical: 380v/50Hz, 230v/60Hz, 3 phases.
15) Noise Level: 65 dBA
16) Weight: 400kg
17) Lubricate Oil: DMC/ HIRI 150, ESSO/ SLG150, BP/ GCS150
18) Dimensions: 1300 x 1000 x 1500mm
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
Model: GE-30/200 1) Suction Volume Displacement: 30.0 Nm3 / hr ; 18 cfm
2) Intake Pressure: 0.0017-0.0035MPa, 0.5psi
3) Discharge Pressure: 20MPa 200bar 3000psi; 25MPa 250bar 3600psi
4) Compression Medium: Natural gas (Not containing sulfur, water and solid particles of more than 20um)
5) Stroke 116mm
6) Rotating Speed: 980 rpm
7) Compress Stage: 4
8) Gas Feeding Temperature: Ambient temperature +10
9) 1st Stage Discharge Pressure: 0.38-0.48 MPa
10) 2nd Stage Discharge Pressure: 1.8-2.5 MPa
11) 3rd Stage Discharge Pressure: 7.0-8.2MPa
12) Cooling: Air-cooled
13) Motor Power: 11 KW/ 15 HP
14) Electrical: 380v/50Hz, 230v/60Hz, 3 phase.
15) Noise Level: 70 dBA
16) Weight: 1200kg
17) Lubricate Oil: DMC/ HIRI 150, ESSO/ SLG150, BP/ GCS150
18) Dimensions: 1200 x 1000 x 1500mm
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
Model: GE-50/200
1) Suction Volume Displacement: 50 Nm3 / hr ; 30 cfm
2) Intake Pressure: 0.0017-0.0035MPa
3) Discharge Pressure: 20MPa 200bar 3000psi
4) Compression Medium: Natural gas
(No containing sulfur, water and solid particles of more than 20um)
5) Stroke 115mm
6) Rotating Speed: 1450 rpm
7) Compress Stage: 4
8) Gas Feeding Temperature: Ambient temperature +10
9) 1st Stage Discharge Pressure: 0.38-0.48 MPa
10) 2nd Stage Discharge Pressure: 1.8-2.5 MPa
11) 3rd Stage Discharge Pressure: 7.0-8.2MPa
12) Cooling Mode: Air-cooled
13) Motor Power: 18.5 kw/ 25 HP
14) Electrical: 380v/50Hz, 3 phase
15) Noise Level: 73 dBA
16) Weight: 1000kg
17) Lubricate Oil: DMC/ HIRI 150, ESSO/ SLG150, BP/ GCS150
18) Overall Dimensions: 1400 x 1600 x 1100mm
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
STRUCTURAL AND PRINCIPAL
Main Features: The pump unit is mainly composed of crankcase, crankshaft, cylinder, piston, gas intake
and discharge valves, etc. The crankcase is made of Al-alloy material, and the needle
bearings are installed on the front and rear end covers of the crankcase to support the
rotation of the crankshaft, meanwhile, the front and rear end covers of the crankcase
are sealed with the O-rings. The movement of the crankshaft and connecting rod
depend fully on the operation of the needle bearing with the protective support. All the
connecting rods are installed on the crankshaft with the special angles. The 1st stage
and 2nd stage pistons are all made of aluminum material and equipped with piston
rings. The 3rd stage piston is made of Al-alloy material and with the special piston rings.
The 4th stage piston is made of reliable neutral steel without elastic rings.
Maintenance: Oil level check and oil change
Filter element change
Drainage valve
Not to be Copied or Changed Copyright © Golden Eagle Imp/Exp (Shanghai) Co., Ltd. All rights reserved.
Circuit Diagram:
Installation: • require flat ground and good ventilation.
• Filling nozzle, inlet 1/8-inch male, and outlet ¼ inch female.