Milling 2
-
Upload
ramasubbu-p -
Category
Education
-
view
3.833 -
download
6
description
Transcript of Milling 2
![Page 1: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/1.jpg)
1
Milling Machines
Session 13
![Page 2: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/2.jpg)
2
Vertical Milling Machine
• Developed in 1860's• Combines vertical spindle of drill press
with longitudinal and traverse movements of milling machine
• Milling process may be vertical, horizontal, angular, or helical
• Can be used for milling, drilling, boring, and reaming
• Can machine in one, two, or three planes• X, Y, Z
![Page 3: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/3.jpg)
3
Vertical Milling Machines• Equipped with variable speed spindles
• Permits wide range of speeds
• Spindle head housing swiveled as much as 90 degrees right and left, and limited backward and forward for angular operations
• Longitudinal and crossfeed movements of table operated by hand or automatic feeds
![Page 4: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/4.jpg)
4
Variety of Operations
• Face milling
• End milling
• Keyway cutting
• Dovetail cutting
• T-slot and circular slot cutting
• Many facing operations done with fly tool
• Gear cutting
• Drilling
• Boring
• Jig boring
![Page 5: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/5.jpg)
5
Types of Vertical Milling Machines
• Ram-type• Most common • Features of horizontal milling machine• Cutter spindle mounted in vertical position• Spindle head may be swiveled allowing
machining of angular surfaces
![Page 6: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/6.jpg)
6
Types of Vertical Milling Machines
• Ram-type
![Page 7: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/7.jpg)
7
Parts of Ram-Type Mill
• Base • Made of cast iron
• May contain coolant reservoir
![Page 8: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/8.jpg)
8
Parts of Ram-Type Mill
• Column• Machined face
provides ways for vertical knee movement
• Upper part machined to produce turret for overarm mount
![Page 9: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/9.jpg)
9
Parts of Ram-Type Mill
• Overarm • Round base• May be adjusted
toward or away from column and rotated
• Locked into position
![Page 10: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/10.jpg)
10
Parts of Ram-Type Mill
• Head • Attached to end
of ram• Universal-type
machines allow swivel in 2 planes
![Page 11: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/11.jpg)
11
Parts of Ram-Type Mill
• Motor • Mounted on top
of head• Provides drive to
spindle through V-belt
![Page 12: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/12.jpg)
12
Parts of Ram-Type Mill
• Spindle speed• Speed changed
by variable-speed pulley/crank or by belt changes and reduction gear
![Page 13: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/13.jpg)
13
Parts of Ram-Type Mill
• Knee • Moves up and
down on face of column
• Supports saddle and table
• Does not contain gears for automatic feed
![Page 14: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/14.jpg)
14
Heavy-Duty Vertical Milling Machine
• Used for machining operations that require larger cutters and good rigidity
• Adapted to operations with both end mills and face mills• Profiling interior and exterior surfaces• Milling dies and molds• Locating and boring holes in vises and
fixtures
![Page 15: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/15.jpg)
15
Heavy-Duty Vertical Milling Machine
![Page 16: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/16.jpg)
16
Horizontal Boring Mill
• The Horizontal Boring Mill (HBM) is classically a large machine. Although small items can be machined on them, they are usually reserved for the large to very large workpieces.
![Page 17: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/17.jpg)
17
Typical Boring Mill Operation
![Page 18: Milling 2](https://reader033.fdocuments.us/reader033/viewer/2022042614/555534f2b4c905f7688b4ab2/html5/thumbnails/18.jpg)
18
Typical Boring Mill Operation