Flight Suit Coverall Fabric made with DuPont Nomex

INHERENTLYFR FABRICS

Military Flight Suit Fabric

Flight Suit Coverall Fabric, made with DuPont Nomex, provides inherent FR (flame resistant) protection and durability. Springfield uses jet spun yarns that reduce undesirable pilling caused by fabric abrasion.

Nomex Flight Suit Fabric is manufactured to military specification MIL-C-83429B using producer dyed fabric made from 92% Nomex fiber, 5% Kevlar fiber and 3% P-140 anti-static fiber.

Springfield fabrics are designed and manufactured to meet or exceed stringent military standards. Major military garment manufacturers trust Springfield to deliver fabric that is to spec, within budget and on time every time.

The fastest-growing American FR fabric manufacturer

P/D Tan 1654 MIL-C-83429B,TII, CL6

P/D Sage 1590 MIL-C-83429B,TII, CL6

COMPLIANCEFTMS, ASTM

Executive Office-Sales & Marketing100 Jericho Quadrangle, Suite 340Jericho, New York 11753(516) 861-6250www.springfieldllc.com

The fastest-growing American FR fabric manufacturer

Typical Physical Properties

Width (inches) Cuttable 66

Weight ( 5%)(oz/yd) FTMS 5041 4.3 - 5.0

Yarns/Inch (warp x fill) FTMS 5050 70 x 47 min

Flame Resistance (warp x fill) FTMS 5903.1 After Flame (seconds) 2.0 max Afterglow (seconds) 25.0 max Char length (inches) 3.5 max

Breaking Strength (lbs, warp x fill) FTMS 5100 180 x 100 min

Tear Strength (lbs, warp x fill) ASTM D 1424 12.0 x 8.0 min

Dimensional Stability (%, warp x fill) FTMS 5556.1 After 15 washes 140F 4.0 x 1.5 max

Air Permeability (cfm/ft2) FTMS 5450 25 - 160

Seam Efficiency (%) FTMS 5110 80 min

pH FTMS 2811 4.0 - 8.0

Electrostatic Decay (seconds) FTMS 5931 0.5 max

Colorfastness to Light AATCC 16-E, 3/25/93 Deviation Equal to or better than standard

Colorfastness to Laundering FTMS 5610 Equal to or better than standard

Fabric Break Open MIL-C-83429B Does not break open

Curling Test MIL-C-83429B Does not curl

Spectral Reflectance MIL-C-83429B Any color with less than 4 wavelengths that do not meet requirements

Military Flight Suit Fabrics

Producer Dyed Nomex Mil-C-83429B Type II, Class 6

Fiber Blend: 92% NOMEX, 5% KEVLAR, 3% P-140

2/2013 v1

Made in America by Springfield LLC

Prolonged sunlight and UV exposure can be damaging to the aramid fibers. Both natural and dyed aramid fibers will fade or change color with exposure to sunlight or other UV sources. The thermal performance is not affected, but long term or repeated exposures will cause the fiber to gradually weaken. Garments should be stored so that they are protected from sunlight to maximize wear life. Springfield LLC offers no warranties, implied or otherwise, for fabric damage or color change due to UV exposure.

Springfield LLC assumes no liability for the accuracy or completeness of the information contained herein. Users must satisfy themselves by independent investigation that the material can be used safely. We have described certain hazards, but cannot guarantee that these are the only hazards. NOMEX and KEVLAR are both registered trademarks of E.I. du Pont de Nemours and Company or its affiliates.