Midwest 22 2014
-
Upload
construction-equipment-guide -
Category
Documents
-
view
332 -
download
0
description
Transcript of Midwest 22 2014
By Irwin RapoportCEG CORRESPONDENT
The demolition of the 5,078 ft. (157.8m) long eight-lane Innerbelt Bridge (builtin 1959, traffic both directions) inCleveland, Ohio, began in early Januaryand is expected to be completed soon.A three-year construction project will
then be set in motion to build the east-bound (five-lane) side of the George V.Voinovich Bridge (GVV) that is beingundertaken by Trumbull-Great Lakes-Ruhlin (TGR) — a Joint-Venture — forthe Ohio Department of Transportation(ODOT).Construction on the viaduct began on
July 21 and work on the west approachstarted last spring.The new westbound bridge, which is
currently handling traffic in both direc-tions, was renamed at its opening in 2013to honor George V. Voinovich, a formermayor of Cleveland, governor of Ohioand a United States Senator from 1999-2011.The $273 million eastbound bridge,
under design by URS Corporation, isintended to be a sister bridge to the west-bound bridge, a $293 million project thatwas built by Walsh Construction. Both
projects were let as design-build projects.“When both are completed they will
look the same, but ODOT allowed somechanges to the structural system providedthe basic shape of the delta girder super-structure and the piers was maintained,”said Steve Stroh, URS’s chief bridge
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
The demolition of the 5,078 ft. (157.8 m) long eight-lane Innerbelt Bridge (built in 1959, trafficboth directions) in Cleveland, Ohio, began in early January and is expected to be completedsoon.
Demo Work Leads to Eastbound Voinovich Span
Grimmer Leads Franciscan
Hospital Project…8
Topcon Reaches Out in Ever
Changing Job Market…20
MRWA Holds Operator
Equipment Expo…12
Inside
Construction employ-ers added 16,000 jobsand the sector’s unem-ployment rate fell to 7percent, the lowest ratefor September in years,according to an analysisreleased Oct. 3 by theAssociated GeneralContractors of America.Association officials saidthe construction employ-
ment gains come asmore firms report havinga hard time findingenough qualified work-ers to fill available posi-tions, citing the lack oflocal vocational trainingprograms, especially atthe secondary level.“While we are eager
to see even more con-struction employment
gains, there is no deny-ing the fact that theindustry has been inrecovery mode for muchof the past three years,”said Stephen E.Sandherr, the associa-tion’s chief executiveofficer. “But the industrywon’t be able to keepfilling positions if there
Construction Employers Add16,000 Jobs in September
October 25, 2014 • Vol. IXX • No.22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.com
Published Nationally
With Oct. 1 marking the beginning of fiscal year 2015, the31-member organization Transportation ConstructionCoalition (TCC) urged Congress to find a way to pay for, andpass, a new long-term surface transportation measure as soonas possible. They cautioned that failure to act would lead toanother self-imposed funding crisis that would underminevital road, highway and transit repairs.“We worked hard to build broad consensus within a
deeply-divided Congress for investing in the nation’s agingroads, bridges and transit systems,” said Stephen E.Sandherr, the chief executive officer of the AssociatedGeneral Contractors of America and the Coalition’s co-chair.“Members of Congress can either take advantage of thatmomentum or add transportation funding back to analready-long list of self-created crises threatening oureconomic vitality.”
Clock Ticks TowardAnother HighwayTrust Fund Crisis
see FUND page 98
see BRIDGE page 50
see JOBS page 30
Table of Contents ................4
Crawler Loaders, Dozers,Undercarriages & PartsSection ..........................39-47
Snow & Ice Section ......55-63
Paving Section..............79-89
Business Calendar ............90
Auction Section..........94-103
Advertisers Index ............102
Page 2 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hundred of machines. Listings updated daily.
Contact: Jeff Speer FABCO Equipment Inc. 11200 W. Silver Spring Rd., Milwaukee, WI 53225
PROVIDING THE BEST IN
USED EQUIPMENT
800.353.1944 ... For Used Equipment
877.754.4477 .... For Used Work Tools & Attachments
414.461.9100 ...In WI and Upper Michigan
www.FABCO.com
2002 Cat D5M........................................$37,500S/N 3CR01772, 10,457 Hrs, EROPS, Appears Good,
PAT Blade, UC Fair Run Out
1999 Volvo L70C....................................$39,500S/N V15854, Hrs Unknown, Meter Reads 7517,
EROPS, Bucket, Tires Good, Hyd Coupler
2001 Komatsu HD325-6 ....................$137,500s/n 5907, 13,525 hours, EROPS, tires,
body and sheet metal all good
2004 Volvo L60E....................................$59,500S/N V60363, hours unknown, EROPS, bucket,
lug tires fair, hyd coupler
2006 Kobelco SK480 ............................$65,000S/N YS06U0571, 9187 Hrs, EROPS, LongStick,
Bucket, Undercarriage Fair
2006 Cat 966H ....................................$179,500S/N A6G00225, 8535 Hrs, EROPS, A/C, GP-bkt,
tires good, engine rebuilt at 7422 hours
2011 Cat 262C........................................$33,000S/N MST03900, 2520 Hrs, EROPS, A/C,
Hyd Quick Coupler, 2-Speed, Bkt, Tires Fair
2003 Hitachi ZX600LC........................$110,000S/N 004015, 10,484 Hrs, EROPS, Undercarriage
Fair, Coupler, Bkt
2011 Cat 966K4....................................$225,000S/N TFS00170, 11,515 Hrs, Bucket, Tires Good,
EROPS, A/C, Auto Lube
1991 CAT 772B ....................................$85,000S/N 64W00186, 34,542 Hrs, EROPS, body good,
tires good, good for age
1999 Cat D6M LGP ..............................$69,000S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good
2012 New Holland L218 ......................$16,500S/N NCM447523, 3637 Hrs, New Engine at 3000Hrs, Bucket, Heat, Tires Good, EROPS No Door
1993 Ingersoll Rand ST105 ..................$6,500S/N 5137, 5169 hours, no ROPS,
runs good, drums good
2008 Cat 297C XPS ..............................$32,500S/N GCP00782, 5370 Hrs, EROPS, A/C, High Flow, Bkt, 2-Speed, Self-Leveling, Tracks
Good, New Drive Motor at 5365 Hrs
2004 Cat D6RLGP DSII ........................$81,000S/N ADE00479, 11,090 Hrs, EROPS, A/C, S Blade,
Drawbar, Undercarriage On Run Out
2004 Cat D6R..........................................$81,000S/N ADE00479, 11,088 Hrs, EROPS, S Blade,
Undercarriage on Run Out, Drawbar
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 3
Largest Independent RentalFleet in the Midwest!
Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.comToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Over 1000 unitsavailable for rent!
Including: 150 Hydraulic Excavators
Long Reach Excavators
75 Bulldozers
50 Wheel Loaders
Mantis Cranes 30-100 Ton
35 Articulated Dump Trucks
On/Off Road Water Trucks
• Angle Blades & Winches Available
75
Long Reach Excavators
150
B lld755
Long Reach Excavators
Hydraulic Excavators150Including:
leet in the MidFge Larrgest Independent
Long Reach Excavators
ator ors
leet in the Mid1000er Ovver
est Indep
eswwest!leet in the Mid uni10000
R pendent
est! units
entalR
35
Mantis Cranes 30-100 T
50
75•
Articulated Dump T35
Mantis Cranes 30-100 T
Wheel Loaders500
Bulldozers755 vailableAinches Angle Blades & W Winches
rucksArticulated Dump T
on T Ton
vailable
ble fvailaa
eor r rent!ble f for r
ent!
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 wwwIllinois T
O O
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
ruater T rOn/Off Road W
ruck & Equipment
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
cksuckss
320 Briscoe Drive
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Page 4 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings,letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are sub-ject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not nec-essarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsi-ble for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
SPECIAL SECTION39 CRAWLER LOADERS, DOZERS, UNDERCARRIAGES & PARTSBe sure to check out this special section! Keep up to date with the latest information on crawler loaders, dozers, undercarriages and parts.
FEATURES8 GRIMMER CONSTRUCTION LEADS FRANCISCANHOSPITAL JOBThe contractor, a northwest Indiana site-work and civil contractor for undergroundutility installation, is known to tackle some of the most challenging undergroundprojects in the area.
12 MRWA HOLDS 6TH ANNUAL OPERATOR EQUIPMENT EXPOMore than 230 people participated in the Minnesota Rural Water Association 6thAnnual MRWA Operator Equipment Expo on Sept. 24, in Waconia, Minn.
18 CRUMMY ROADS AN ISSUE IN MICHIGANGOVERNOR’S RACEWhen Democratic gubernatorial candidate Mark Schauer took questions during arecent visit to a union hall in suburban Detroit, meat cutter Jim Mesich brought upa long source of frustration for Michigan drivers.
18 WACKER NEUSON HONORS TOP DEALERS ATANNUAL MEETINGMore than 100 Wacker Neuson contracted dealers from the United States andCanada represented by over 150 representatives attended the two-day event.
20 FIRM SEEKS SKILLED EMPLOYEES IN EVERCHANGING JOB MARKETUnfortunately, American youth are not told about the various possibilities in theconstruction market — and in most cases are actively dissuaded from consideringanything that has to do with construction.
26 ZIEGLER CAT POISED FOR FUTURE GROWTH WITHEXECUTIVE TEAM PROMOTIONSZiegler CAT has promoted Mark Allen to senior executive vice president, AndreasHoeft to executive vice president of sales, and William M. Hoeft to executive vicepresident of product support.
26 JCB OPENS PARTS DISTRIBUTION CENTER INCHICAGO AREAThis Chicago-area facility will serve as JCB’s main parts distribution center in NorthAmerica, joining the company’s three other parts warehouses in Savannah, Ga.;Fontana, Calif.; and Ontario, Canada.
28 SOUTHEASTERN EQUIPMENT COMPANY ADDSKYLE, THOMA TO ITS SALES TEAMSoutheastern Equipment Company recently announced two new hires.
30 AGC PRESENTS INDEPENDENCE EXCAVATING WITHSAFETY AWARDIndependence Excavating’s Safety Director Tom Steblinski cited the firm’s personalized safety approach as the basis for this award, as well as the absence ofreportable injuries on major projects including the Cleveland Convention Centerdemolition and site package and the Ford Brook Park engine plant demolition.
34 ALTORFER WELCOMES SHADDEN AS AG SALESREPRESENTATIVEChris Shadden will represent the RoGator and TerraGator product lines for 10counties in Altorfer’s eastern Iowa territory, including Delaware, Dubuque, Jones,Jackson, Cedar, Clinton, Scott, Muscatine, Louisa and Des Moines.
54 BOBCAT COMPANY NAMES WINNERS OF MILLIONLOADERS CONTESTA second-generation Bobcat compact equipment owner received the surprise of hislife by being honored with a special edition one-millionth Bobcat T650 compacttrack loader during Bobcat Company’s “Unstoppable” campaign and MillionLoaders Celebration contest.
64 NORTRAX PROMOTES NETH TO DIRECTOR OFHUMAN RESOURCES, NORTH AMERICACurt Neth joined Nortrax in March of 2005 as a regional human resource manager of Ohio and Tennessee.
98 LIUGONG MAKES ADDITIONSLiuGong North America has appointed Jake Huang as vice president of LiuGongNorth America.
EQUIPMENT79 HAMM Oscillatory Rollers80 ROADTEC RX-100e Milling Machines84 WIRTGEN W 250i Cold Milling Machine
DEPARTMENTS90 BUSINESS CALENDAR90 CLASSIFIEDS94 COMING AUCTIONS
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900
Toll Free 800/523-2200 Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail [email protected]
Advertising e-mail [email protected]
For advertising rates Contact Joseph S. McKeon• Illinois • Wisconsin • Northwest Indiana• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Kent HogeboomNational Sales Manager
315/866-1423Toll Free 800/988-1203
Fax 315/866-1379e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio • Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
Mobile LinkedIn Facebook Twitter YouTube
To read these stories and many more, visit www.constructionequipmentguide.com
IN THIS ISSUE128 20
®
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 5
Komatsu D51PX-22, ’08, 4,013 hrs ......$124,500
Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000
Komatsu D65EX-15, ’06, 2,301 hrs........$144,500
Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500
Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500
Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500
Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500
Komatsu GD655-3EO, ’09, 1,474 hrs ....$169,500
Norco Puma 220, ’11, 78 hrs ....................$CALL
Ponsse Cobra HS10, ’98, 20,013 hrs ......$75,000
Valmet 415EX/Rolly II, ’05, 10,092 hrs $135,000
Valmet 840.2, ’05, 6,600 hrs ................$169,000
Valmet 860.4, ’12, 1,640 hrs......................$CALL
Valmet 911.3, ‘08, 8,655 hrs ................$235,000
Cat 365CL-MH, ‘08, 10,428 hrs ............$154,500
Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500
Roadtec RX700, ’08, 4,630 hrs..............$170,000Wirtgen W60, ’08, 628 hrs ....................$144,900Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000Wirtgen W600, ’03, 2,403 hrs..................$77,500Wirtgen W2100, ’04, 8,373 hrs ..................$CALL
Blaw-Knox PF115, ’08, 1,921 hrs ............$14,500LeeBoy 8500LD, ’08, 910 hrs ..................$74,500Vogele 1110WB, ’03, 1,004 hrs ..............$85,000Vogele 5103-2, ’11, 1,273 hrs ..............$250,000Vogele 5203-2, ’09, 2,727 hrs ..............$195,000Vogele Super 700, ’07, 566 hrs ..............$79,500
Bomag BC61RB, ’00, 15,862 hrs ............$54,900Bomag BC1172RB, ’05, 15,531 hrs ........$94,900Bomag BW120, ’00, 2,801 hrs ..................$9,500Bomag BW205AD, ’02, 3,520 hrs ............$26,500Cat CB24, ’10, 1,239 hrs ..........................$24,500Hamm HD14VV, ’09, 2,460 hrs ................$29,500Hamm HD90 Ozzy, ’04, 4,300 hrs ............$36,500Volvo DD90HF, ’09, 638 hrs ....................$59,500
Komatsu HM300-2, ’06, 6,500 gal ........$275,000Komatsu HM400-2, ’07, 8,000 gal ........$395,000
Komatsu WA65-3, ’04, 745 hrs................$56,500Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500Komatsu WA250-6 High Lift, ’11, 2,086 hrs ..........................................................................$124,500Komatsu WA320-7, ’13, 462 hrs............$174,500Komatsu WA320-7, ’14, 81 hrs..............$165,000Komatsu WA380-6, ’11, 2,094 hrs ........$179,500Komatsu WA380-7, ’13, 1,385 hrs ........$185,000Komatsu WA430-6, ’07, 4,404 hrs ........$129,900Komatsu WA450-6, ’07, 8,069 hrs ........$149,500Komatsu WA500-3, ’98, 11,556 hrs ........$79,500New Holland LW190B, ’04, 5,908 hrs......$33,500Terex TL300-2, ’08, 2,441 hrs..................$79,500
Kleemann MSD190D Screen, ’13, 688 hrs ............................................................................$255,000Kleemann MC110Z Crusher, ’13, 714 hrs..............................................................................$475,000
Cat 330CL, ’02, 12,032 hrs ......................$69,500Cat 345BL, ’03, 10,750 hrs ......................$72,500Deere 350DL, ’07, 6,752 hrs..................$124,500Deere 350DLC, ’07, 5,837 hrs ..............$124,500Deere 350DLC, ’07, 6,832 hrs ..............$115,000Deere 590D, ’93 ......................................$24,500Gradall XL4100 III, ’09, 5,191 hrs ........$130,000Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500Komatsu PC200LC-6, ’01, 5,824 hrs........$59,500Komatsu PC200LC-7, ’02, 6,850 hrs........$84,500Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500Komatsu PC200LC-7, ’03, 5,975 hrs........$89,500Komatsu PC200LC-7, ’03, 6,128 hrs........$64,900Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500Komatsu PC200LC-8, ’06, 4,621 hrs........$97,500Komatsu PC220LC-6, ’96, 6,510 hrs........$64,500Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500Komatsu PC220LC-8, ’06, 2,606 hrs......$139,500Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500Komatsu PC300LC-7EO, ’06, 6,320 hrs ..$99,500Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000Komatsu PC360LC-10, ’14, 655 hrs ......$269,500Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500Komatsu PC400LC-7, ’05 8,163 hrs ......$124,500Komatsu PC400LC-7, ’05 11,134 hrs ......$92,500Komatsu PC400LC-7EO, ’07, 3,991 hrs $204,500Komatsu PC400LC-8, ’08, 3,815 hrs......$209,500Komatsu PC450LC-8, ’11, 2,389 hrs......$309,500Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500Komatsu PC600LC-7, ’05, 4,910 hrs......$369,500Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500Volvo EC210BLC, ’04, 13,274 hrs ............$57,500Volvo EC240CLR, ’11, 454 hrs ..............$195,500
DOZERS
PAVING
WHEEL LOADERS
EXCAVATORS
CRUSHING/SCREENING
COMPACTION
WATER EQUIPMENTMILLING
GRADERS
FORESTRY
MATERIAL HANDLERS
15 Roland Branch Locations in IL, IN, MI, MO, and WI
V
I
S
I
T
R
O
L
A
N
D
M
A
C
H
I
N
E
R
Y.
C
O
MCall Jay Germann (217) 789-7711 • Email: [email protected]
Cat CB24, ’10, 1,238 hrs ..........................$24,500 Valmet 840.2, ’05, 6,600 hrs ................$169,000
Financing Available for Qualified Buyers
Quality Used Equipment...with support to back it up
Komatsu PC400LC-8MH, ’08, 6,095 hrs..$219,500Kleeman MSD190D Screen, ’13, 688 hrs........$255,000
Page 6 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
Mark Kruepke • (630) 739-7770Bolingbrook, IL
Contact us at [email protected]
View our complete Used & “Like New” inventoryat McCannOnline.com
McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.
2012 Case 850L, s/n NCD80092, 700 Hrs,Cab w/Heat & AC, 124” Blade, 24” Grousers......................................................$120,000
2011 Case 580SN, s/n JJGN58SNKAC536021,2480 Hrs, Cab w/Heat & AC, Extenda-Hoe,Ride Control, Two Lever, 4 in 1 Bkt, Aux Hyds,12”, 18” & 24” Bkts ........................$59,900
2013 Case SR250, s/nJAFSR250JCM443037, 310 Hrs, Cab w/Heat,Two Speed, Hyd Coupler, 78” Bkt, 14 x 17.5Tires ................................................$43,500
2003 Takeuchi TL130, s/n 21301340, 2650 Hrs, Cab w/Heat & AC, NEW TRACKS,67” Smooth Bkt ..............................$19,200
2012 Case Cx250CLR, s/nDAC250K6NCSAM1210, 500 Hrs, 60’ LongReach, Control Pattern, 60” Ditch Bkt ................................................................$230,000
2012 Case SV250, s/nJAFSV250JBM435496, 100 Hrs, Cab w/Heat& AC, Two Speed, Hyd Coupler, 78” Bkt, 33 x 15.5 Tires ................................$43,500
2012 Case SR250, s/n JAFSR50VBM434310,750 Hrs, Cab w/Heat & AC, Blc High-Flow, 12 x 16.5 Tires, 72” Bkt ..................$39,500
2013 Case SV250, s/n JAFSV250PCM460705,950 Hrs, Cab w/Heat & AC, Bic High-Flow, 12 x 16.5 Tires, 74” Bkt ..................$40,500
STARE Q U I P M E N T
LT D .
Star EquipmentConstruction Equipment & Supplies
Sales • Service • Rentals
www.starequip.com 877-267-7203Des Moines • Ames • Cedar Rapids • Waterloo
New 2014 IMT DOM2 11-FT BodyMounting at IMT Factory now7500# 30’ Hydraulic Crane with Radio Remote
Controller, Hydraulic Compressor & Other Extras,HD 8 Drawer Tool Chest & Basic Shelf Package,Mounted on 2004 International 4300 26K GVW
w/225hp DT-466, 6 Speed Manual, Air Conditioning,Approx. 180,000 Miles, Very Clean Unit!!
Sale Price … $88,950
Check this Price!
Lots of Extras!
IMT SERVICE TRUCKS
New 2014 IMT 11’ Body10K, 30’ Crane & Hydraulic Outriggers,
and the ALL New VanAir I300 to fight the Def problems. Has Battery Booster, 300 Amp
Welder, and Hydraulic Pump mounted on the Bodywith all Raised Compartments, and LOTS of Extras.Mounted on a 2014 F-750 Ford Air-Ride Truck with
a 250 HP Cummins Engine and Auto 5 Speed. Call for Pricing
No DEF
Since 1985!
CALL JENNIFER TODAY!(888) [email protected]
www.RBusedParts.com
NEW, USED & REMAN PARTS• Undercarriage
• Arms & Booms
• Cylinders
• Valves
• Transmissions
• Pumps
• Engines
• and More!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 7
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
YOUR AUTHORIZED DEALER
For information on our in-stock equipment, contact Lanny Peterson at:
[email protected] ormobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTALLIS 500-SD PORTABLE CONE CRUSHER, 300 HP electric motor, rear feed conveyor, side discharge conveyor,motor control panel, tri-axle, hydraulic leveling ................................................................................................$130,000JCI/FABTEC 6’X20’ TD DUAL SCREEN PLANT, (2) 30” reversing conveyors under primary screen, 60” conveyorunder secondary screen, (3) 42” cross conveyors (6) hydraulic leveling jacks, motor control panel ............$182,500JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feedconveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8”Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight,5800 Frame Hours and Recent Engine Rebuild........................................................................................$95,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads andRemovable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALL
CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway,Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with aCummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $299,000GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$159,500AMERICAN 5300, 1988, 70 Ton Crawler Crane, Cummins w/3 Stage Converter, CLL on One Drum, Third Drum,Independent Travel, 130’ Boom, 30’ Jib ................................................................................................$155,000
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
AMERICAN 5300 70 TON CRAWLER CRANEGROVE TM9120 TRUCK CRANE
Large Selection of New & Used Equipment in Stock.
View us at:www.amstate.com
in WISCONSIN and UPPER MICHIGAN for:
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view:
www.finkbinerequipment.com
CEDAR RAPIDS CR662RM - ‘10, 1611 Hrs, MTV w/Hopper Insert, THRU SHOP CURRENTUPDATES ADDED, #61981A, S/N JO798 ..........................................................................$239,878MAULDIN 1500 - ‘03, 844 Hrs, Track Conveyor Feed, 8’-13’ Screed, #61999A, S/N 1134 ......................................................................................................................................................$27,950MAULDIN 1550C - ‘09, 1533 Hrs, Track, Conveyor Feed, #C000620, S/N 2138 ..............$54,600MAULDIN 1750C - ‘13, 175 Hours, 8’-16’, #C000225 ....................................................$119,950NEAL CART PATH PAVER - ‘08, 638 Hrs, 5’-8’ Screed Conveyor Feed, #61886A, S/N 03-0608 ..............................................................................................................................................$32,500
CALL items may be on rent causing pricing and hours to vary.
WIRTGEN W50DC - ‘13 • 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill, 236 Hrs $214,950
INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available ..............$26,500 Ea.SAKAI R2H-2 - ‘12, 388 Hrs, 3 Wheel Static, 83”, #61950A, 1R5-60251 ........................$83,795SAKAI R2H-2 - ‘13, 90 Hrs, 3 Wheel Static, #C000223, 1R5-60309 ................................$89,795SAKAI R2H-2 - ‘13, 30 Hrs, 3 Wheel Static, #C000252, 1R5-60313 ................................$93,412SAKAI R2H-2 - ‘13, 291 Hrs, 3 Wheel Static, #C000312, 1R5-60312 ..............................$87,750SAKAI SW850-2 - ‘11, 224 Hrs, 79” Double Drum Vibratory Roller, #61870A, S/N 50152......................................................................................................................................................$92,578SAKAI SW880 - ‘12, 295 Hrs, 79” Double Drum Vibratory Roller, #61938A, S/N 10142$117,980SAKAI SW300 - ‘13, 55 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156..$33,950SAKAI SW502 - ‘13, 233 Hours, 51 inch drum 9000 lb remaining std and or eptw warranty,#C000212..........................................................................................................................$41,974
*Comes with any remaining standard and 3 year extended power train warranty.
GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218......................$19,500GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000GRADALL XL4100 - ‘02, 7745 Hrs, Good Machine, #C000402, S/N 411552 ....................$42,500GRADALL XL4100 - ‘02, 7068 Hrs, Call on this One, S/N 415548 ....................................$53,950LIEBHERR A904C - ‘11, 1435 Hrs, No Buckets w/Machine, Many Buckets in Stock for This ................................................................................................................................................$156,950
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Page 8 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Grimmer Construction Leads Franciscan Hospital JobGrimmer Construction Inc., a
northwest Indiana site-work andcivil contractor for undergroundutility installation, is known totackle some of the most challeng-ing underground projects in thearea, the INDOT 169th StreetReconstruction and Gary SouthLevee projects just to name a few.Founded in 1983 by Greg G.
Grimmer Sr., currently chairmanof the corporation, GrimmerConstruction “started primarily asa small underground contractordoing subdivision work. We havesince grown into doing civil, publicworks projects for the local munic-ipalities in Lake and Porter Countyin northwest Ind. state of Indianawork,” said Mark Grimmer, presi-dent, manages the company as partof the second generation including;John Grimmer, equipment manag-er; Dan Grimmer, project superin-tendent; and Margie Hofmann,project coordinator.To ensure the job runs smoothly,
the company relies on its fleet ofheavy equipment and those thatprovide it for them. “We do a mix of our equipment
fleet,” said Mark. “Primarily JohnDeere, Hitachi, Case, Kobelco andCaterpillar. We are currently aver-aging about 40 pieces of equip-ment including excavators, load-ers, dozers, scrapers, and articulat-ed dumps.”Recently, Grimmer Construction
was in the market for a new dozerto work on the Franciscan Hospitalproject in Munster, Ind.The project consists of a new
building addition and related sitework for General Contractor, Tonn& Blank of Michigan City. Grimmer turned to West Side
Tractor Sales Company, which hasa combined 10 stores to servicenorthern Illinois, southernMichigan and Indiana. West Side Tractor Sales
Representative Jeff Pratt recom-mended the John Deere 700Kdozer, which Grimmer purchasedand since then has been verypleased with. John Grimmer said, “The size of
the dozer was the right fit for cut-ting the roads, parking lots, and fin-ishing the earthwork. We were ableto hook up and utilize our GPSequipment for a smoother applica-tion and better efficiency.” Johncontinued, “the machine is very
versatile for small projects and italso has enough horsepower to dothe larger projects and move somedirt. One of the main reasons whywe chose the John Deere 700 sizeseries is that it’s not only a good fitfor this project, it can also work forthe local municipal street projectsand get it done quickly.”In addition to the dozer, Gimmer
Construction also purchased aTopcon MC2 from PositioningSolutions Company.Concerning the quality of serv-
ice given to them by the West SideTractor team, “We have been deal-ing with Jeff for roughly 15 years.Jeff takes care of the needs wehave and is very knowledgeable.When we have any questions, he isquick to answer. He knows thefield real well,” said Mark.
About West Side TractorWest Side was started in 1962
by Rich and Mary Benck of
The Grimmer Construction Inc. managementteam (L-R) are Mark Grimmer, president;Margie Hofmann, project coordinator; GregGrimmer Sr. CEO and chairman; and JohnGrimmer, equipment manager.
Grimmer Construction Inc. Operator Andy Seegers pushes dirt with the new John Deere 700K dozerwith the Topcon MC2 from Positioning Solutions Co.see GRIMMER page 98
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200
Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500
John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000
(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple
Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000
Others Available CallPrices Are Negotiable - At Your Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPING
CRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
Page 10 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Your VOLVO dealer in:
North DakotaBismarckFargoMinotWilliston
North CarolinaCharlotteRaleighAshevilleGreenville
South CarolinaColumbiaNorth CharlestonPiedmont
GeorgiaBufordForest ParkSavannah
East TennesseeKnoxvilleChattanooga
Asphalt/Pavers/Concrete Equipment1987 BLAW-KNOX PF120H, 5952 Hrs ..........................................................$7,2222007 INGERSOLL RAND PF6110, 2809 Hrs ........................................$167,0002004 VOLVO PF5510, 148 Hrs ........................................................................$25,0002006 VOLVO PF6110, 2866 Hrs....................................................................$166,700(2) 2007 VOLVO PF6110, 2809-2994 Hrs ......................................$166,700 Ea.(2) 2008 VOLVO PF6110, 3258 Hrs ......................................$166,700-$167,0002011 VOLVO PF6110, 2288 Hrs....................................................................$206,000
Compactors-Smooth Drum2010 VOLVO DD112HF, 1771 Hrs..................................................................$88,9002008 VOLVO DD118HF, 2030 Hrs..................................................................$83,5002007 VOLVO DD90HF, 1753 Hrs ....................................................................$58,5002012 VOLVO SD116DX, 62 Hrs ....................................................................$116,700
Excavators-Crawler2006 HITACHI ZX240 LC-3, 8410 Hrs ........................................................$67,0002013 KOMATSU PC350 LC-8, 2437 Hrs ..................................................$222,3002013 KOMATSU PC360 LC-10, 740 Hrs ..................................................$278,0002008 VOLVO EC210C LC, 3063 Hrs ..........................................................$122,5002011 VOLVO EC210CL, 3505 Hrs................................................................$138,9002013 VOLVO EC220D, 2345 Hrs ..................................................................$144,500(4) 2013 VOLVO EC220DL, 6-2715 Hrs..............................$139,000-$150,0002008 VOLVO EC240CL, 6909 Hrs ..................................................................$93,5002011 VOLVO EC240CL, 2796 Hrs................................................................$150,0002012 VOLVO EC250D LR, 1341 Hrs ..........................................................$189,0002011 VOLVO EC250DL, 2778 Hrs................................................................$161,2502013 VOLVO EC250DL, 2000 Hrs................................................................$170,5002004 VOLVO EC330B, 5800 Hrs ....................................................................$52,777(2) 2011 VOLVO EC340DL, 3293-4400 Hrs......................$177,800-$184,000(6) 2012 VOLVO EC340DL, 1419-3728 Hrs......................$181,000-$214,500(3) 2013 VOLVO EC340DL, 1391-2428 Hrs......................$211,250-$220,0002013 VOLVO EC380DL, 2610 Hrs................................................................$222,0002011 VOLVO EC460C LC, 5735 Hrs ..........................................................$250,000(2) 2012 VOLVO EC480DL, 2637-2661 Hrs......................$291,500-$328,0002013 VOLVO EC480DL, 2599 Hrs................................................................$324,500
Excavators-Mini (up to 12,000 lbs)2004 VOLVO EC55, 6035 Hrs ..........................................................................$27,7772008 VOLVO EC55B, 4263 Hrs........................................................................$40,555
Excavators-Wheel(2) 2011 VOLVO EW180C, 2576-2933 Hrs........................$161,200-$166,7002012 VOLVO EW180D, 1785 Hrs..................................................................$194,500
Motor Graders2013 BLAW-KNOX G700, 321 Hrs ..............................................................$158,5002002 VOLVO G720 VHP, 2221 Hrs ................................................................$72,2252011 VOLVO G946, 1970 Hrs ........................................................................$211,2002011 VOLVO G946B, 1981 Hrs ....................................................................$211,200
Off-Highway Trucks2007 CATERPILLAR 725, 9247 Hrs ............................................................$123,3332004 VOLVO A25D, 6467 Hrs ........................................................................$206,0002011 VOLVO A25F, 4220 Hrs ........................................................................$242,000(3) 2012 VOLVO A25F, 2642-2952 Hrs ..................................$283,500-305,750(4) 2013 VOLVO A25F, 1249-1949 Hrs ..............................$286,000-$305,0002005 VOLVO A30D................................................................................SOLD $165,0002008 VOLVO A30E, 7445 Hrs ........................................................................$170,5002011 VOLVO A30E, 3185 Hrs ........................................................................$283,500(10) 2012 VOLVO A30F, 2344-3818 Hrs ............................$300,000-$328,0002012 VOLVO A30F ................................................................................SOLD $324,5002012 VOLVO A30F ................................................................................SOLD $328,000(3) 2013 VOLVO A30F, 1940-2896 Hrs ..............................$324,500-$330,0002014 VOLVO A30F, 1453 Hrs ........................................................................$328,600(2) 2012 VOLVO A35F, 2462-3300 Hrs ..............................$388,300-$415,0002010 VOLVO A40E, 3873 Hrs ........................................................................$339,200(11) 2011 VOLVO A40F, 2456-6571 Hrs ............................$319,000-$410,000(23) 2012 VOLVO A40F, 1577-6565 Hrs ............................$324,500-$447,0002012 VOLVO A40F ................................................................................SOLD $346,000(4) 2013 VOLVO A40F, 2429-4155 Hrs ..............................$388,300-$402,800(3) 2013 VOLVO A40F FS, 1631-2564 Hrs ......................$455,800-$494,750
Sweepers/Boom Equipment2012 BLAW-KNOX CB90, 145 Hrs ................................................................$51,7502012 BLAW-KNOX FB90, 242 Hrs ................................................................$58,500
Water Equipment - Truck2006 VOLVO A30D, 6864 Hrs ........................................................................$255,750
Wheel Loaders2006 VOLVO L110E ................................................................................SOLD $49,5002010 VOLVO L110F, 5170 Hrs ......................................................................$155,6002011 VOLVO L110F, 6865 Hrs ......................................................................$143,000(2) 2012 VOLVO L110G, 1535-3266 Hrs............................$200,000-$242,000(6) 2013 VOLVO L110G, 1066-2817 Hrs............................$209,000-$234,0002009 VOLVO L150F, 6938 Hrs ......................................................................$183,400(3) 2010 VOLVO L150F, 9601-11462 Hrs ..........................$133,400-$133,500(3) 2012 VOLVO L150G, 2676-3057 Hrs............................$267,000-$305,7502011 VOLVO L180G, 4842 Hrs......................................................................$278,0002013 VOLVO L180G, 2879 Hrs......................................................................$334,0002013 VOLVO L220G, 859 Hrs ........................................................................$413,400(2) 2012 VOLVO L250G, 2100-2699 Hrs............................$355,000-$399,0002003 VOLVO L50D, 7897 Hrs............................................................................$44,4442010 VOLVO L50F, 8049 Hrs ............................................................................$55,5552005 VOLVO L60E, 17059 Hrs ........................................................................$33,3332013 VOLVO L60G, 1468 Hrs ........................................................................$144,000(2) 2012 VOLVO L70G, 1850-3019 Hrs ..............................$144,500-$151,250(2) 2013 VOLVO L70G, 2692-2938 Hrs ............................................$147,000 Ea.2005 VOLVO L90E, 6801 Hrs ........................................................................$100,000(4) 2012 VOLVO L90G, 1625-2618 Hrs ..............................$183,000-$194,500(11) 2013 VOLVO L90G, 788-4261 Hrs ..............................$156,000-$192,500
2009 VOLVO L120F, 6911 Hrs ..................$155,600 2012 VOLVO L150G, 2674 Hrs ................$305,7502012 VOLVO L150G, 2765 Hrs ................$267,000
A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.
Full inventory at: www.ascvolvo.com
Doug Wilson 704-562-2032 Email: [email protected]
Billy Brice 678-318-9500Email: [email protected]
USED EQUIPMENT
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 11
ascvolvo.com
NORTH DAKOTABismarck701.250.4882Fargo701.271.2360Minot701.839.4020Williston701.570.5309
GEORGIABuford678.318.9500Forest Park770.319.0074Savannah912.964.8079
NORTH CAROLINAAsheville828.687.0620Charlotte704.596.8283Greenville252.754.5280Raleigh919.661.8710
SOUTH CAROLINACharleston843.414.1120Columbia803.791.0740Piedmont864.704.1060
TENNESSEEChattanooga423.308.7940Knoxville865.525.1845
Look to ASC Construction Equipment for industry-leading Volvo motor graders. Every graderin our fleet is built with the power, precision, pull and force you need to get the most out ofeach and every pass.
The power to carve your own path.
Smart Works.
Page 12 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MRWA Holds 6th Annual Operator Equipment Expo
RDO Vermeer, Burnsville, Minn., had sales professionalsPat Arnold (L) and Tim Williams with a VacTron LP 833SDT.
Donald Block (R) gives this Kubota U35-4 excavator atry at the ball challenge with pointers from SpencerKolles, light construction specialty sales of ArnoldsEquipment, Mankato, Minn.
Attendees test their skills by plac-ing rings on cones during therodeo skills contest.
(L-R): Josh Jensen, city of Apple Valley, Minn., sewer and water spe-cialist; Kent Zimmerman, tech specialist, city of Apple Valley, Minn.;and Bernie Bourasa, Truck Utilities utility sales check out an IMT10,000 lb. (4,536 kg) crane on a Truck Utilities outfitted service truck.
Joe Pick of Rock County, Minn., likesthe hands-on aspect of this event ashe tries out the John Deere 410 TLBprovided by RDO Equipment.
Joe Miller (L), Gary CarlsonEquipment, and Josh Opheim, city ofRobbinsdale maintenance specialist,go over a steel trench shield.
Reese Meacham (L), utilities operator ofthe city of Red Wing, Minn., prepares to takea shot at the trials course in this KubotaSVL 90 provided by Arnolds Equipment asMike Strodtman, source water protectionspecialist of the Rural Water Association,shows him the course.
More than 230 people participated in theMinnesota Rural Water Association(MRWA) 6th Annual MRWA Operator
Equipment Expo on Sept. 24, in Waconia, Minn.,at the Carver County Fairgrounds. The Expo is not an exhibit hall; it is a live,
hands-on demonstration show with demos gearedtowards water and wastewater operators, man-agers and personnel using heavy equipment.Attendees were able to try out the products andheavy equipment and see for themselves howthese products work. They also could choose toparticipate in the heavy equipment contests. Heavy equipment for attendees to test drive
was provided by Arnolds Inc. from Kimball,Minn., and RDO Equipment Company fromBurnsville, Minn.Attendees also had a chance to learn about the
newest products and technology in the industry.Attendees received up to six certification hours(water and/or wastewater) for full-day attendance. There was lots of training opportunities to take
advantage of such as valve exercising, flowmeters, tapping pvc pipe, emergency hydraulicpumping equipment, groundwater well demo,water main flushing, chemical feed, fire hydrantrebuild, GIS tools, poly pigging, a chance to par-ticipate in a skid loader rodeo skills contest, abackhoe skills contest, mini-excavator contest andother all-day events such as line tracing demo,water tower inspection services demo and a sewernozzle demo. Next year’s Expo is set for Sept. 23, 2015 at the
Carver County Fairgrounds. For more information, visit www.mrwa.com. (This story also can be found on Construction
Equipment Guide’s Web site at www.construc-tionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 13
JD 2112C Scraper Pan,#U12244 ..........$79,000
JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$468,000
NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18
JD 744K, Cab, Air, 5.25Yd Bkt, #U12207 ................................$294,000
JD 200CLC, 50’ LongFront, #U11828 ..................................$109,000
Case STX550 ScraperTractor, #U12066................................$254,000
JD 350DLC, 13’1" Arm,32" Pads, #U11703 ............................$179,000
Low Hour JD 844K’sAvailable, 0% for 36Months on Select Units
JD 350GLC MaterialHandler, #N5539 ................................$495,000
JD 850K LGP, 36"Pads, 168" PAT Blade,919 hours, #U11976............................$325,000
JD 850K, 24" Pads,128" Blade, 1646 hours,#U11857 ........$268,000
Fiat HD21, Side Boom,Excellent Condition, 3 Available $83,500 Ea.
JD 400D, New KLEIN8000 gallon water truck,7102 hrs, #U11425..............................$258,000
JD 310SJ, Cab, Air,4x4, Aux Hyd, #U12433........................$62,000
JD 700K, LGP, 30”Pads,132” PAT Blade,Warranty, #U12196 ............................$163,000
Page 14 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Used Equipment From a Name You Can Trust2003 Bobcat Toolcat 5600
Stk#77638-(A) C/H/A, Headache Rack, Radio, 62”Bucket, 356 Hrs..........................................$38,000
2011 Bobcat S150
Stk#92500, H51 Pkg, C/H, Pwr Bobtach, 2 Spd,Bkt, 258 Hrs ..............................................$28,750
2011 Bobcat T770
Stk#14655-(S) A71, C/H/A, SJC, Roller Susp., PwrBobtach, Air Ride, 2 Spd, Radio, 1251 Hrs $56,900
2013 Bobcat T750
Stk#90452-(A) A71, C/H/A, Pwr Bobtach, Air Ride,2 Spd, 18” Trks..............................................$CALL
1998 Bobcat 863
Stk#90169-(L) C/H, Bkt, NO door, Steel Trks, 3930Hrs..............................................................$13,700
2009 Bobcat S250
Stk#41345-(S) A71, C/H/A, Pwr Bobtach, Susp.Seat, 2 Spd, NEW Paint, Bkt, 1171 Hrs ......$32,900
2014 Doosan DX235LC-3
Stk#66545-(S) C/H/A, Long Arm, Wide Trks, PE3C,Rearview Camera ..........................................$CALL
2014 Doosan DX350LC-3
Stk#77510-(A) US30, C/H/A, PE3C, Long Arm,Wide Trks, Rearview Camera ........................$CALL
2014 Kubota SVL75-2
C/H/A, Hyd Quick Attach, 2 Spd, 15” Tracks ......................................................................................$CALL
2012 Kubota RTV400
Stk#10820, ATV Tires, Orange Paint, 45 Hrs......................................................................................$6,950
2012 Kubota SVL90
Stk#13799-(S) C/H/A, Hyd Quick Attach, 2 Spd,17.7” Trks, 1655 Hrs ....................................$43,900
2011 Kubota KX121R3TA
Stk#8474-(S) C/H/A, Hyd Thumb, Ang Blade, RubberTrks, Bkt, 606 Hrs ........................................$45,900
2011 Kubota KX71
Stk#27202-(A) ROPS, Quick Attach, Hyd Thumb, Bkt,486 Hrs ........................................................$30,000
2004 Kubota KX91
Stk#27217-(A) ROPS, Quick Attach, Hyd Thumb,Bkts, 1711 Hrs ..............................................$23,000
2012 John Deere 332D
Stk#90569-(A) C/H/A, 2 Spd, High Flow Hyd, No FlatTires, 366 Hrs ................................................$45,000
1979 Komatsu 31A-16
Stk#90612-(S) ROPS, 6 Way Blade, RebuiltTransmission, 1352 Hrs................................$21,900
Anoka (A), MN888-448-5266 • 763-323-1720
Loretto (L), MN888-479-4342 • 763-479-8200
Shakopee (S), MN877-753-6100 • 952-445-6310
www.lanoeq.com www.lanoequip.com www.lanogardengear.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 15
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: [email protected]
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.
2002 Volvo L120E, Cab, A/C, Contronics, Heated SuspensionSeat, Work Lights, Boom Suspension, 3rd Function, HydraulicAttachment Bracket, Right Hand Footsteps, Full Rear Fenders,118” 4.4cy Bucket 3/BOE, 23.5R25 Tires ....................$85,000
2011 Volvo L45F, Cab, A/C, Radio w/CD, Air Suspension Seat,Single Lever Control, Sliding Window Operator’s Door, Front/Rear Work Lights, 3rd Function, Torque Parallel Linkage, Hyd.Attachment Bracket, Reversible Cooling Fan, Reverse Alarm,88” 1.8cy Bucket w/BOE, 15.5R25 Michelin Tires ......$99,500
2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC,Pilot Controls, Counterweight ......................................$65,000
2013 Volvo L90G, Camera w/Color LCD Monitor, SlidingWindow Operator's Door, Halogen Work Lights Front/Rear,Boom Suspension, Hydraulic Attachment Bracket, ReversibleCooling Fan, Reverse Alarm, Rotating Warning Beacon, RearFrame Cover Plates, Front Frame Footsteps, Full Rear Fenders,CareTrack System, 104" 3.5cy Bucket w/BOE, 20.5R25 MIXHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine..............$182,500
2013 Volvo BL70B, Municipal trade, 92.5" loader bucket,mech. att. bracket, 1.3 CY GP bucket w/ spill guard, EXT dip-per arm, pilot controls,4WD, A/C, radio w/CD, MP3 connection,double battery, boom suspension, additional 1080lb counter-weight ..........................................................................$89,500
2012 Dressta TD25M, 26" Severe Service Pads, 90% UC,Hydraulic Controls (3 Spool Valve / 2 Lever), Severe ServiceCrankcase & Transmission Guards, Final Drive Rock Guard,Full Length Track Roller Guard, Engine Block Heater,Start/Charging Receptacle Plug Assembly w/15' Cable, Semi-U Blade (12.5cy) w/Reinforced Center Push Plate & HydraulicTllt, Fixed Drawbar ....................................................$270,000
2008 Volvo A40E - A/C, Radio w/CD, Air Suspension Seatw/Armrest, Front Work Lights, Elec Hood Opener, DelayedEngine Shutdown, 29.5R25 Tires ..............................$285,000
2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat,Rear Camera, Electro-Hydraulic Servo Controls, OptiShift,Comfort Drive Control, Boom Suspension, Work Lights,Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater,Full Rear Fenders, Re-Handling Counterweight, CareTrackHardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4Tires, Volvo D13H-F (Tier 4i) ..........................................CALL
2011 Volvo DD138HF - Back up alarm, infrared temp sensor,work lights, 328 gal water tank cap, operating weight 30,325lbs, vibrating frequency: 3200 vpm, vibration centrifugal force:21,840-42,260 lbs, 84" drum width ................................CALL
2012 Volvo L150G, 26.R25 L3 VJT Bridgestone Tires, VolvoD13H-E Engine, Radiator, Reversible Cooling Fan, Rear ViewCamera, Engine Block Heater, Boom Suspension, RehandlingCounterweight, 126” 5.5cy GP STE Bucket w/BOE ..$265,000
2011 Volvo SD116DX, Work lights, flow divider, bolt on pad footshell, inside scrapper, universal scrapper, grill support installa-tion, operating weight 23,930 lbs, vib frequency 1,870-2,018vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drumwidth ..........................................................................$117,000
2012 Volvo BL70B, Municipal Trade, 92.5” Loader Bkt, Mech.Att. Bracket, 1.3 CY GP Bkt w/Spill Guard, EXT Dipper Arm, PilotControls, 4WD, A/C, Radio w/CD, MP3 Connection, DoubleBattery, Boom Suspension, Additional 1080lb Counterweight ........................................................................................$83,500
2012 Volvo L70G, MUNICIPAL TRADE, A/C, Radio w/CD,Heated Air Susp Operator's Seat, Rear Camera, BoomSuspension, Hydraulic 4 Functions, , Reversible Cooling Fan,CareTrack Satellite System w/3yr Subscription, 100" 3.1cyBucket w/BOE, 20.5R25 BR VJT L3 tires, Volvo D6H (Tier 4i)Engine ........................................................................$165,000
2013 Volvo EC250DL, Municipal trade, 19'9" boom, 11'10" arm,36" track pads, engine block heater, air susp seat w/heat, joy-stick 3 switch & 1 prop, climate control with a/c, radio w/cd, rearview camera, 2 pump double act. piping, quick fit piping, pilotpattern controls, straight travel pedal, caretrack ........$217,500
2011 Volvo DD70HF, Backup Alarm, Operating Weight 14,895lbs, 205 Gallon Water Tank Capacity, Vibration Frequency:4000 VPM, Vibration Centrifugal Force: 7,820-21,080 lbs, 57”Drum Width ....................................................................CALL
2002 Hitachi ZX330 LC, A/C, Radio, Lubecore Auto GreaseSystem, 36" Pads, 39'8" Boom, 30'9" Stick, 60" DitchingBucket ..........................................................................$92,500
Page 16 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
#1Chrysler Corp. Commercial
Dealer in Minnesota
We Deliver!
The fast lane for small business.
18 Cabs and Chassis in Stock
More Coming!RAM H.D. HEADQUARTERSFURY MOTORS South St. Paul, Minnesota
Truck Master Dick Reineck • 651.251.8214 direct • [email protected] * Pricing represents all Denver business center rebates deducted!
32 Promasters Ready to Go!
2014 Ram 3500Cab & Chassis, Knapheide 9.6’ Box, Tool Box,Hitch, HD Hemi, Plow Package, Auto, T/C
MSRP $45,750
Fall Special $37,999*
2015 Ram 2500Std. Cab PW/PL/T/C, Auto, HD Package, 6.4 V8, 8’ Blizzard Plow, Back Up Camera
MSRP $47,576
Fall Special $38,599*
Ram 3500plus Plow
MSRP $48,965
Fall Special $39,999*
2013 Ram 3500Crew 4x4 Dually AIS A/T 850 Cummins P/W,
P/L, T/C, A/C, BedlinerMSRP $53,930
Fall Special $44,113*
2014 Ram Caravan CargoP/W, P/L, T/C, A/C
MSRP $23,310
Fall Special $18,499*
Promaster 1500FWD V/6 Auto, P/W, P/L, T/C, A/C
MSRP $31,025
Fall Special $28,579*
Only 1 Left!
Tows 20,800#’s
Choose from 7
Choose from 32
PromasterMSRP $34,965
Fall Special $29,999*
Ram 3500Cab & Chassis CrewMSRP $51,300
Fall Special $42,999*
Fall$pecial$
Diesels Shipping
Diesels Shipping
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 17
We make one of the broadest lines of construction, mining, road
building and material handling equipment in the world. All
backed by top-notch warranty, training, parts and service
support. Contact your local dealer today for more information...
T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com
D
EVERY JOB.EVERYWHERE.
MidWest Ready Mix & Equipment1405 East Highway 50 • Vermillion, SD 57069
605-638-0897www.buyaloader.com
Page 18 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Wacker Neuson Honors Top Dealers at Annual MeetingWacker Neuson held its third
annual fall dealer summit, Oct. 2 to3. The light and compact equip-ment manufacturer invited its con-tracted dealers to the Milwaukeearea to discuss new opportunitiesfor 2015 and to honor those dealersthat have done an outstanding jobat representing the brand.More than 100 Wacker Neuson
contracted dealers from the UnitedStates and Canadarepresented by over150 representativesattended the twoday event.Company updateswere provided at alocal hotel venue,but the highlight ofthe event was anequipment displayand awards cere-mony at the Harley-Davidson Museumlocated in down-town Milwaukee.“Building and
maintaining a strong brand is animportant element of the WackerNeuson dealer summit,” saidJohannes Schulze Vohren, vicepresident and managing director,Wacker Neuson Corporation. “It isour goal to be a valued businesspartner to our dealers and make itour priority to understand whatthey need to build a sustainablebusiness and provide the support
they need to be success-ful.”Every year, Wacker
Neuson acknowledgesdealers who are highlycommitted to represent-ing the Wacker Neuson
brand. “With close to 400 models in a
variety of equipment categoriesand a prestigious group of dealersin our network, selection of theannual award winners is strictly bythe numbers.” said Schulze
Vohren. The top sales for 2013 innine different categories are the cri-teria for the 2014 honorees.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
Wacker Neuson staged its equipment display at the Harley Davidson Museum in downtownMilwaukee.
Recipients of Wacker Neuson Sales Awards for theUnited States and Canada were presented at theWacker Neuson Dealer Summit Oct. 2 to 3. Top salesawards in a variety of equipment categories weredetermined based on 2013 sales.
Crummy Roads an Issue in Michigan Governor’s RaceBy David EggertASSOCIATED PRESS
STERLING HEIGHTS, Mich. (AP)When Democratic gubernatorial candidateMark Schauer took questions during a recentvisit to a union hall in suburban Detroit, meatcutter Jim Mesich brought up a long sourceof frustration for Michigan drivers: crummyroads. Why not, he asked Schauer, repeal a busi-
ness tax cut and put all the money towardimproving roads? Better that, he said, thanasking “common guys’’ to pay more at thepump. Schauer criticized Republican Gov. Rick
Snyder for being unable to persuade theGOP-led Legislature to pass a road-fundingfix and said Snyder’s “trying to raise taxeson you’’ through proposed higher gasolineand vehicle registration taxes. But Schauerwas less specific in detailing how he as gov-ernor would raise the minimum $1.2 billionmore a year that Snyder said is needed toavoid drastic deterioration of roads andbridges. Schauer favors keeping in place the cor-
porate income tax that Snyder enacted, sothat’s off the table as a potential pot of
money. He said he would look for savings instate departments to redirect to the trans-portation budget, lobby Congress to sendmore federal gasoline tax revenue back toMichigan and ask companies to pay their“fair share’’ in increased fees on overweightand oversized trucks. It’s unlikely those moves alone would
generate enough money, however, or be seenas a permanent road-funding solution. AHouse-approved bill that’s pending in theSenate, for instance, would generate just$8.6 million more than the current $4 milliona year in special fees assessed on heavytrucks — a fraction of the $3.7 billion trans-portation budget. Schauer, who voted for Michigan’s last
state gas tax hike as a freshman lawmaker in1997, may be leaving the door open toanother one. He criticized the idea whenunveiling his jobs plan in July, but whenasked in September by The Associated Pressif he was ruling out gas tax or license platefee increases, he said: “I’m just saying wehave to do this fairly.’’ Snyder and Republican legislators, he
said, “have proposed tax increases on thesame people they’ve already raised taxeson’’ — a reference to the 2011 tax overhaul
that slashed business taxes but eliminated orreduced tax exemptions on retirementincome and credits for homeowners, renters,children and low-income earners. Beforetalks on road funding stalled in June,Democratic legislators pushed for bills thatwould make more homeowners and renterseligible for an income tax break, a demandthey wanted in exchange for helpingincrease the gas tax. Both gubernatorial candidates agree
something must be done. Michigan spends less per driver on roads
than any other state. It ranks 33rd in spend-ing per lane mile and 47th per vehicle miletraveled, according to a state TransportationDepartment review of 2012 FederalHighway Administration Data. Yet Michigan also has some of the coun-
try’s highest taxes at the pump, about 10cents a gallon above the national average.That’s because the 6 percent sales tax also isapplied to motor fuel but mostly goes toschools and local governments under thestate constitution. Flat per-gallon fuel taxes — 19 cents for
gasoline, 15 cents for diesel — are faultedfor declining state transportation revenue aspeople drive less and with more fuel-effi-
cient vehicles. Though vehicle registrationand title revenue is up, it hasn’t offset thedrop in fuel tax revenue, a problem giveninflationary construction cost increases. Snyder, who blames election-year politics
for the most recent legislative opposition tohis call for more tax revenue for roads, saidresidents pay hundreds of dollars annuallyon unnecessary vehicle repairs due to poorroads. Repairing deteriorating highwaysnow would help boost economic develop-ment and save taxpayers a much larger billdown the line, he said. Schauer said if he was governor, he could
strike a bipartisan deal, referring to his timein Lansing when then-Republican Gov. JohnEngler signed a 4-cent gas tax increase. Both Schauer and the incumbent, though,
know the major political obstacles to dedi-cating $1.2 to $2 billion more a year to roadsand bridges. Mesich said pothole-ridden streets are
damaging his vehicles. “We pay enough taxes. I’m not opposed
to paying taxes because nothing is free. Justbe fair,’’ he said.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 19
Page 20 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Firm Seeks Skilled Employees in Ever Changing Job MarketBy Jeff WinkeSPECIAL TO CEG
“I wouldn’t wish any specific thing forany specific person — it’s none of my busi-ness. But the idea that a four-year degree isthe only path to worthwhile knowledge isinsane. It’s insane.”
— Mike Rowe, Host of “Dirty Jobs” andtrade careers activistThe need is there. Visit construction con-
tractors anywhere in North America and it’llbe mentioned: the pressing need for goodemployees. The best and brightest could do well in the
field. The opportunities are challenging. Theincome can be immense. And growth withinthe profession is clearly there for the moti-vated. Unfortunately, American youth are not
told about the various possibilities in theconstruction market — and in most cases areactively dissuaded from considering any-thing that has to do with construction. Theoutdated stereotypes held by parents andschool guidance counselorsprevail. For many students whoare exploring career options,construction is presented as theoption of last resort or even athreat. They may be presentedwith the image of a scrubbed-clean youth in business attireversus a dirty, sweaty workerdigging ditches and are told:“Study hard, get a universitydegree or you’ll end up swing-ing a pickaxe all day.”The young in America are
still fed the promise that a col-lege degree is the only path tohigher earnings and success.Reality is not so certain intoday’s post-Great-Recessionnew world. The average tuitiondebt load for the class of 2012was $29,400, according to areport from the Institute forCollege Access & Success’Project on Student Debt. At thesame time that personal debthas been going up, collegesacross the country have beenhiking tuition and fees.Meanwhile, families’ incomeshave been shrinking and stu-dent loan debt has risen at anaverage rate of six percent per year from2008 to 2012, the report found.Recent college grads are finding that their
college diplomas no longer function likemagic wands that can open doors of oppor-tunity. Instead, they are settling for lower-paying jobs outside their field, while carry-ing a tuition debt load that easily exceeds
their income. In today’s world, it’s best to benice to the waiter and coffee-shop baristasince they are likely to be recent collegegrads carrying enormous debts, and still liv-ing at home with their dreams on hold. The unfortunate reality is that the intelli-
gence, creative problem solving, communi-cation skills and appreciation for technology
attributes that employersallegedly seek in universitygraduates is exactly what con-struction companies want. The diversity of disciplines
and evolution of technology inthe construction fields do notin any way reflect the stereo-type of someone who is notsmart enough to do anythingbut work in construction. Theconstruction field includesthose who create 3D digitalmodels of a construction site,operators of technologicallyadvanced million-dollarmachines that use GPS controlto achieve graded surfaces thatare measured in millimetersand workers responsible foraccurately mapping theuneven features of a raw con-struction site using satellitenavigation systems, inertial
measurement and laser scanning. Today, the best and brightest are what are
needed in construction and contractors areseeking just that.Understanding the demand for qualified
workers in the construction fields, TopconPositioning Systems Inc., a developer andprovider of technologies and products for the
survey and construction markets, has devel-oped outreach and partnership programs tohelp schools and colleges attract more stu-dents and to equip them with the latest tech-nology so their students graduate with expe-rience using state-of-the-art products.The Topcon Educational Partnership
Program (EPP) is missioned with helpingeducational institutions by providing dis-counted Topcon products for instruction, aswell as learning tools to aid in educating thefuture generations of surveyors, engineers,precision agriculture and construction pro-fessionals.EPP partner schools and colleges are
offered:• Access to the EPP instructor portal on
Topcon TotalCare — an online training andcustomer support site• Hands-on instructor and classroom train-
ing provided by a Topcon product specialist• Special product discounts for education-
al institutions• Direct access to Topcon Technical
Support• Free access to otherwise paid online
training services• Educational rental program that bundles
both product and one-on-one training from aTopcon product specialist
The Topcon Technology Roadshow is currently on a 24-city tour ofNorth America, spanning a 23,000-mi. circuit. The intent is to bringproducts and training close to those who can benefit from it.
Students from various trade colleges and university-level techni-cal programs have been invited to participate in two-day visits atRoadshow locations.
see TOPCON page 100
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 21
Rudd Used Equipment. Only the price gives it away.
USED DEPARTMENT:
Albert MedcalfOffice (502) 456-4050Cell (502) [email protected]
Marcela NewmanOffice (502) 456-0256Cell (502) [email protected] Español
Rudd gives you options. We have a department dedicated to used equipment. Rudd specializes in
making the equipment reliable and your project more reasonable. Wherever your work takes you, you can
get your hands on this affordable equipment worldwide. For more information, call us today.
ruddequipment.com.
Page 22 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Chicagolands’s COMPLETE Factory-Direct Rental Resource
TE
ACTORY-DIRECT FFACTORY-DIRECT Sales & Rental - CHICAGO BRANChicagolands’s COMPLEDirect Rental Resource
y-
ACTORY-DIRECT Sales & Rental - CHICAGO BRAN FactorTE
CHACTORY-DIRECT Sales & Rental - CHICAGO BRAN
Special Operations Shoring Division.Special Operations Shoring Division.
815-893-6700
--
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 23
BURNSVILLE, MN 800.552.1189
DULUTH, MN 800.835.6225
MANKATO, MN800.862.6225
ROCHESTER, MN 800.562.1505
ROSEVILLE, MN800.704.0935
ST. CLOUD, MN888.310.6225
TOOLS THAT MAKE YOUR BUSINESS WORK™ Volvo Construction Equipment
You do it with a machine you can depend on – Volvo Excavators. You work with a dealer you can rely on – Nuss Truck & Equipment. Smart Works – every day.
You excavate more work – and more profit.
Smart Works.
Page 24 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 25
2008 Komatsu D51EX-22: #82113, Cab/AC, PATBlade, Sweeps, KOMTRAX, 2,650 hrs ..$112,500
2007 Komatsu WA250-5: #82117, Cab/AC, JRBQC, 3rd Valve, 4,500 hrs ..........................$93,500
2004 Komatsu D65EX-15: #80803, Cab/AC, 20”Tracks, Drawbar, 3,550 hrs ....................$117,500
2001 Komatsu PC220LC-6LF: #80381, Cab/AC,60’ Long Front, 5,700 hrs ......................$139,500
1983 Dresser TD20E: #92025, Cab, 24” Tracks,Drawbar, Sweeps ......................................$34,500
2004 Caterpillar 321C LCR: #92063, Cab/AC, QC,Aux Hyd, 9,100 hrs ....................................$64,500
2002 Caterpillar 325CL: #92079, Cab/AC, 31.5”Tracks, 10’ 6” Arm, QC, 12,100 hrs ........$69,500
2006 Komatsu WA450-5: #81696, Cab/AC, GPBucket, High Lift, 8,100 hrs....................$134,500
2004 Deere 120C: #92046, Cab/AC, 27.5”Tracks, Mech Thumb, 4,200 hrs ..............$53,500
1998 Caterpillar D6M XL: #81916, Cab/AC, 24”Tracks, Winch, 13,500 hrs........................$99,500
2002 Komatsu WA250-3: #92018, Cab/AC, JRBQC, 8,200 hrs............................................$47,500
2006 Komatsu WA80-5: #81981, Cab/AC,QC/Bucket, 1,700 hrs................................$59,500
Call Doug / Sam:
(866) 485-7180
Page 26 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JCB has officially opened its newest North American partsdistribution center in Aurora, Ill. This Chicago-area facilitywill serve as JCB’s main parts distribution center in NorthAmerica, joining the company’s three other parts warehous-es in Savannah, Ga.; Fontana, Calif.; and Ontario, Canada.“This new facility more than doubles our previous North
American warehouse capacity, making it possible for us tostock more parts inventory in North America than everbefore,” said Chris Giorgianni, vice president of parts andservices of JCB North America. “Furthermore, by establish-ing our main parts distribution center in Chicago’s central-ized location, we’ve been able to reduce transit times to ourdealers. That means our North American customers will beable to more quickly get the parts they need to stay up andrunning.”
The Chicago facility will serve as the main parts distribu-tion hub and provide the breadth and depth of inventoryneeded to service our customers. This new facility will serv-ice a large portion of the midwestern United States, the north-east and south central United States. JCB’s North American Headquarters in Savannah and its
parts distribution center in Fontana, Calif., will continue toprovide primary parts support to the southeastern, westernU.S. and Mexico respectively, with the Chicago warehouseproviding backorder support as needed and the Ontario,Canada, facility continuing to serve its Canadian dealers andcustomers.“The opening of this new parts distribution center is a sig-
nificant investment in servicing our North American cus-tomer base.” said Arjun Mirdha, president and CEO of JCBNorth America.“JCB has now expanded from one parts distribution cen-
ter to four locations. With the opening of the Chicago facili-ty, and the recent doubling of our Canadian facility, we’vedoubled our total parts warehouse capacity and continue toexpand our reach throughout the U.S., Canada and Mexico.This new main parts distribution center, and likewise, ourrecent investment in several new field-based service supportpersonnel, will allow us to better support our growing dealernetwork, national account partners and customers through-out North America.”For more information call 912/447-2000 or visit
www.jcbamericas.com. (This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
JCB Opens PartsDistribution Centerin Chicago Area
“The opening of this new parts distribution center is a significantinvestment in servicing our NorthAmerican customer base.”
Arjun MirdhaJCB North America
Ziegler CAT Poised for Future GrowthWith Executive Team PromotionsZiegler CAT has promoted Mark Allen to senior executive
vice president, Andreas Hoeft to executive vice president ofsales, and William M. Hoeft to executive vice president ofproduct support.Allen previously served as Ziegler’s chief financial offi-
cer, executive vice president, vice president of administra-tion, corporate controller and accounting manager.Andreas Hoeft was previously vice president of construc-
tion sales, business development manager for the introduc-tion of the new Cat vocational truck, industrial CSR salesmanager, customer support representative (CSR) and salesterritory manager, and he holds a Six Sigma Black Belt.William M. Hoeft was vice president of product support
sales and marketing, product-support product manager,CSR, mining business specialist, marketing coordinator andproduct-support specialist, and he holds a Six Sigma BlackBelt.“This new executive structure will enable our leadership
to better support the company and position us for futuregrowth,” said William L. Hoeft, president, CEO and chair-man of the board. Founded in 1914, Ziegler is a family-owned company
employing more than 1,700 people in 26 communities inMinnesota, Iowa, Wisconsin and Missouri.
(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.) Mark Allen
William M. HoeftAndreas Hoeft
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 27
2005 CAT TH580B, ID# 0CR4563, S/N SLH00411, 2910HOURS, STABILIZERS ..................................................$54,300
2011 CATERPILLAR 247B3, ID# MUC0332, S/NTSL00465, 1943 HOURS, CAB, A/C ........................$35,200
2008 CATERPILLAR 272C, ID# NUC0126, S/N#RED01432, 3130 HOURS, CAB, AIR ........................$34,800
2002 CATERPILLAR 304CCR, ID# NUC0156, S/NWAK00357, 3005 HOURS, CANOPY......................$19,500
2012 CATERPILLAR 289C ID# NUC0122, S/N JMP02797,1068 HOURS, CAB, A/C ..............................................$55,400
2010 CAT 299C, ID# NUC0128, S/N JSP00798, 2045HOURS, CAB, AC ..........................................................$51,100
2008 CATERPILLAR 287C, ID# NUC0080, S/NMAS01333, 4300 HOURS, CAB, AIR ........................$31,500
2008 CAT 247B2, ID# NUC0184, S/N MTL05450, 2940HOURS ..............................................................................$23,900
2008 CAT D6TXL, ID# MUC0312, S/N LAY00759, 8075HRS, CAB, AIR ..............................................................$157,100
2010 CATERPILLAR D7E, ID# NBU0033, S/N MDB00198,3600 HOURS, CAB......................................................$350,000
2012 CATERPILLAR 14M, ID# NUC0061, R9J00536, 4045HOURS............................................................................$332,500
2009 CATERPILLAR 12M, ID# MUC0321, S/N B9F00371,4870 HOURS, CAB, AIR ............................................$144,700
2009 CATERPILLAR 140M, ID# MUC0313, S/NB9D01851, 6280 HOURS, NICE UNIT ..................$144,700
2009 CATERPILLAR 938H, ID# NUC0023, S/NMJC00642, 4570 HOURS ..........................................$116,200
2005 CATERPILLAR 963C, ID# NUC0078, BBD01460,8665 HOURS....................................................................$93,400
2011 CATERPILLAR 336E, ID# NUC0031, S/NBZY00778, 3115 HRS, CAB, HEAT, AIR................$230,100
Kansas City (844) 845-8814 • Wichita (866) 773-5581 • [email protected]
Page 28 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WE VULCANIZE
Southeastern Equipment Company recently announced two newhires.
Doug Kyle has joined the company as sales representative at theIndianapolis, Ind. location. Kyle is selling Kobelco, Bomag andKubota equipment throughout Bartholomew, Boone, Brown, Clark,Clay, Clinton, Decatur, Floyd, Fountain, Hendricks, Jackson,Jefferson, Jennings, Johnson, Lawrence, Marion, Monroe,Montgomery, Morgan, Owen, Parke, Putnam, Scott, Tippecanoe,Vermillion, Vigo, Warren, and Washington counties.
“We’re excited to have Doug join our sales team,” said CharliePatterson, president of Southeastern Equipment. “We look forwardto his contributions across Indiana.”
Before joining Southeastern Equipment, Kyle was a self-employed trader.
In addition, Michael Thoma has joined the company as sales rep-resentative at the Mansfield, Ohio, location. Thoma is selling Case,Kobelco and Bomag equipment throughout Richland, Ashland,Knox, Crawford, Marion, Wyandot and Morrow counties.
“We’re glad to welcome Michael to our sales team,” said CharliePatterson, president of Southeastern Equipment. “He brings excel-lent experience in sales to our group.”
Before joining Southeastern Equipment, Thoma was a sales asso-ciate for Superior Beverage Corporation. He also has managed themaintenance needs for 1,500 Big Lots retail stores.
(This story also can be found on Construction Equipment Guide’sWeb site at www.constructionequipmentguide.com.)
Southeastern Equipment CompanyAdds Kyle, Thoma to Its Sales Team
Michael Thoma
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 29
Page 30 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction UnemploymentFalls to 7 Percent; Lowest in Yearsaren’t enough qualified workers available tofill them.”Construction employment totaled 6 mil-
lion in September, the highest total sinceMay 2009, with a 12-month gain of 230,000jobs or 3.9 percent, Sandherr noted.Residential building and specialty trade con-tractors added a combined 11,800 employ-ees since August and 129,400 (5.9 percent)over 12 months.Nonresidential building and specialty
trade contractors hired a net of 3,700 work-ers for the month and 100,300 (2.7 percent)since September 2013. However, heavy andcivil engineering contractors, which performthe majority of public-sector construction,increased their headcount by only 500 inSeptember and 29,000 (3.3 percent) over theyear amid tight government budget condi-tions.The number of workers who said they
looked for work in the past month and hadlast worked in construction fell to 604,000 inSeptember. The last time the number ofunemployed construction workers dropped
that low was August 2007, a time when theconstruction industry was struggling withwidespread construction worker shortagesthat prompted project delays and increasedcosts, Sandherr cautioned.Association officials said many firms cite
the lack of local, secondary-level vocationalprograms as one of the causes for the work-er shortages. As a result, association officialscontinued to urge federal, state and localofficials to enact the series of measures theassociation identified in its WorkforceDevelopment Plan that will make it easierfor school districts, local associations andprivate firms to establish career and technicaleducation and training programs.“Labor shortages happen when a growing
industry meets a stagnant pool of qualifiedworkers,” said Sandherr. “It is time to alignour education and training systems with cur-rent economic conditions so more youngpeople can benefit from the rebound in con-struction demand.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
JOBS from page 1
Caterpillar Sponsors 2014High Horsepower SummitCaterpillar Inc. has sponsored the 2014
High Horsepower Summit (HHP), Oct. 6 to9 in New Orleans, La. The event is NorthAmerica’s leading conference on the use ofnatural gas to fuel high horsepower opera-tions. As an industry leader in the design andmanufacture of dual-fuel and natural gasengines, Caterpillar plans to highlight itscommitment to delivering the highest cus-tomer value for energy and power systemsoperations, as well as rail, marine and min-ing applications.“We’re proud of where our natural gas
heritage has brought us today and excited tolead the next wave of natural gas productsand services taking shape in the industry,”said Caterpillar Vice President with respon-sibility for the Large Power SystemsDivision Tana Utley, who presented thekeynote address at the Summit. “Cat natural gas products integrate the lat-
est innovative technology solutions with theperformance customers expect and deserve,and are bringing cost savings to our cus-tomers’ operations across the globe — fromour engines driving the world’s first naturalgas powered barge in Hamburg, to our gen-
erator sets operating in North America’slargest natural gas power plant in Kansas.”At the show, attendees saw examples of
how Caterpillar customers are using thecompany’s Dynamic Gas Blending (DGB)dual fuel solution in oil and gas, rail andmarine applications. Caterpillar product dis-plays included the 3512 DGB engine for oiland gas applications, the Electro-MotiveDiesel (EMD) 710 engine for locomotiveand marine applications, MaK dual-fuel,medium speed engines for marine applica-tion and gas powered electric power prod-ucts that feature the lowest owning and oper-ating costs in the industry. HHP attendeesalso heard about the company’s positiveresults with its products currently being test-ed in the field. EMD’s liquefied natural gaslocomotive test units have incurred morethan 5,000 test miles and achieved success-ful performance results while operating inNorth America this year.For more information visit www.caterpil-
lar.com/naturalgas.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
AGC Presents Independence Excavating With Safety AwardFor a second time, Associated General
Contractors (AGC) awarded IndependenceExcavating its National AGC SafetyExcellence Award — First Place in theFederal and Heavy Division for 700,000 to 1million hours worked. IndependenceExcavating received this award based uponits exceptional safety performance, well-implemented safety program and an incidentrate at least 25 percent below that of its AGCmember peers.Independence Excavating’s Safety
Director Tom Steblinski cited the firm’s per-sonalized safety approach as the basis forthis award, as well as the absence ofreportable injuries on major projects includ-ing the Cleveland Convention Center demo-lition and site package and the Ford BrookPark engine plant demolition. “In my experience outside the firm,
[Independence Excavating’s] safety pro-gram is unlike most construction companieswhere safety personnel are office-based, pro-cessing workers’ compensation and paper-work. Our safety specialists and coordina-tors spend 80 percent of their time in thefield developing relationships with the guysdoing the work. We’re not the safety police,trying to catch them doing somethingwrong. We develop trusting relationships
with the workers and get their buy-in onsafety. Our safety personnel come from fieldpositions; we’ve been in their shoes. Theguys understand that we’re here to help themgo home safely to their families by abidingby safety regulations, all while helping themdo their jobs,” said Steblinski.The firm also finds its safety commitment
creates cost savings for its clients “Accidents — especially severe accidents
— will impact the day of the event and, tosome extent, the schedule going forward. Wemaintain utmost safety measures because weunderstand that accidents affect morale, thespeed of work, and our team’s comfort. Ourcommitment to safety and preventing
accidents delivers cost savings on each proj-ect,” said Steblinski.In fact, Independence Excavating remains
one of the few Ohio construction firms of itssize that is approved by the state of Ohio toself-insure workers’ compensation. The firmwas awarded self-insured status in 2005because of its strong financial standing andexcellent safety record. “We pass the cost savings gained from not
having to pay premiums on to our clients,giving them an even better price on eachjob.”With offices in Cleveland, Pittsburgh and
Chantilly, Va., Independence Excavating isan industry leader in challenging site devel-opment, heavy industrial applications, dem-olition, environmental solutions, concreteconstruction, aggregate crushing and one ofthe Midwest’s premier and diversified con-struction companies. Founded in 1956 bythe DiGeronimo family, IndependenceExcavating has earned a solid reputation forhonesty, integrity and outstanding perform-ance.For more information, visit
www.indexc.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
PRNewsFoto/Independence Excavating Inc. photo(L-R) are Willis Construction Practice Chairman, Paul Becker; IndependenceExcavating Safety Director Thomas Steblinski; Captain Richard Phillips;Independence Excavating President Victor DiGeronimo Jr.; and Associated GeneralContractors President Paul Diederich.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 31
SUPER 2-BOLT - ON WHEEL KIT
HYDRAULIC TRACK INSTALLATION KIT
TOLL FREE 855-575-LUGS(5847)or 913-947-3934
www.bairproducts.comEmail: [email protected]
Got Lugs?
ALLOY CENTER BOGIE WHEELS
AVAILABLE SEPTEMBER 2014
REPLACEMENT DRIVE CARRIER PARTS
AVAILABLE SEPTEMBER 2014
V / TST / AAAT / AC
STRAX P PAEREV / T
TOLL FREE
N WT - OLL OB-R 2PEUS
Factor
855-575-LUGS(5847)or 913-947-3934
oducts.com.bairprwwwoducts.comEmail: info@bairpr
855-575-LUGS(5847)
TIL KEEHN W
Bai ’ Axlery
913-947-3934oducts.com
oducts.com
• 25% Thicker Steel Backing Plates
AVAILABLE SEPTEMBER 2014
TNEMECALPRERA PREIRRA CVEIRD
G G
25% Thicker Steel Backing Plates
AVAILABLE SEPTEMBER 2014STR
Bolt-On ReplacementTrack Drive Lugs
Go ot ot Go Luo ug gs L s? Lug ? gsGot Lug ? s?
• Bolt-On Wheel Replaces Older Hub Style Wheels
• 100% Larger Axle Shaft• Greaseable/
Preload Adjustable•
30/50/60 ModelsCAT 247/257, ASV/TEREX
•& Sprocket Base
• Greaseable Carrier Unit
25% Thicker Steel Backing Plate
ASV / Terex 50/60/85/100AT 247/257/
RDYH
CAT 247/257/267/277/287ASV / Terex 50/60/85/100
es
• Install rubber tracks fast with Hydraulic Tools
• Fits most CAT/ASV/TEREX Compact Loaders
IN KOITAALLATSNK ICARC TILUAR
Install rubber tracks fast with Hydraulic ToolsFits most CAT/ASV/TEREX Compact Loaders
T
•
Y COLLAIEGOB
Bair Part #BW9F Flange Wheel
• CAT 277 / 287 D SERIES
• TEREX / ASV SR& PT 75/80/100G/110 MACHINES
SEE SLBALIAVVAA
Bair Part #BW9F
R ETNEY CSLEEH WIE
CAT 277 / 287 D
TEREX / ASV SR
410 2BERR 2METEP
G/110
Custom Made Products Co.Humboldt, IA
(800) 760-7871 Call Anytime70-80 Scrapers on Hand at 15 Locations
FOR SALE OR FOR RENTLocations: Humboldt, Bayard, DeSoto, Iowa Falls, Union, Manchester, Britt, Decatur City, Sac City,
Woodbine, Readlyn, Chariton, Fremont, Newton & Wayne, NEwww.gncmp.com
GRADERSArt’s-Way Graders, (New & Used) ................................................CallJohnson Graders (New & Used)....................................................CallAll sizes available for either ManufacturerLeon Grader GZ400 ......................................................................Call
ASHLAND18yd Ashland I-180 TS2s, (New & Used) ....................................Call17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call13yd Ashland I-130 TS2s, (New & Used) ....................................Call13yd Ashland I-130 XL2s, (New & Used) ....................................Call11yd Ashland I-110 TS2s, (New & Used) ....................................Call11yd Ashland I-110 XL2s, (New & Used) ....................................Call9yd Ashland I-900’s & I-950’s, (New & Used)..............................CallAshland Groundhog GH2500, (New & Used) ................................Call
GARFIELD12yd Garfield Model 1150s, (New & Used)..................................CallGarfield Model 1350s, (New & Used) ..........................................Call8yd Garfield Model 850s, (New & Used)......................................Call5yd Garfield Model 550s, (New & Used)......................................Call
BIG DOG8 yd Big Dogs, (New & Used) ......................................................Call6 1/2 yd Big Dogs, (New & Used) ................................................Call5 yd Big Dogs, (New & Used) ......................................................Call12’ Feedlot Box Scrapers..............................................................Call10’ Feedlot Box Scrapers..............................................................Call12’ Box Scrapers ..........................................................................Call10’ Box Scrapers ..........................................................................Call8’ Box Scrapers ............................................................................Call
IRONWOLF8-12 yd ..........................................................................................Call
LEON10-13 1/2 yd ..................................................................................Call
NEW & USED ROWSE7 yd Rowse Model 7002 & 7004 ..................................................Call5 yd Rowse Model 7002 & 7004 ..................................................Call3 yd Rowse Model 3002................................................................Call
MISCELLANEOUS1 1/2 yd & 3 yd Durabilts Model DP60 & DP84, (New & Used) ..Call3/4 yd G&A Mini Scraper, (New & Used)......................................Call
18 yd AshlandI-180 TS2s(New & Used)Call
13 yd Ashland I-130 XL2s(New & Used)Call
We Will Not Be Undersold!
FreeDelivery!
Page 32 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Bobcat Company Launches ‘Show Us Your Tracks’ ContestBobcat Company wants to hear from customers
who think they have the toughest and dirtiesttracks on their Bobcat compact track loader, mini-track loader or compact excavator. Whoever hasthe most compelling story and photo will win anew set of genuine Bobcat rubber tracks.
The Bobcat “Show Us Your Tracks” contestruns through Nov. 12. Individuals can enter onlineat www.bobcat.com/TracksContest.
Entrants simply need to describe how they usetheir machine and why they deserve a new set oftracks. The grand-prize winner will receive newtracks installed free of charge by a local authorizedBobcat dealer. Six weekly winners will choosefrom a selection of Bobcat merchandise, includinghooded sweatshirts, hats and scale models.
“Hard work deserves to be rewarded,” saidKristen Hintermeyer, social media manager ofBobcat Company. “We are always eager to getstories and photos from customers working in theconditions that Bobcat compact track loaders,mini-track loaders and compact excavators arebuilt for — the dirtier, muddier and tougher, thebetter.”
A completed entry form with a photo must besubmitted by Nov. 12, 2014, at 5 p.m. CST. Thecontest entry should specify the entrant’s Bobcatmachine and model number for the entry to beconsidered complete.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.) The grand-prize winner will receive new tracks installed free of charge by a local authorized Bobcat dealer.
For all your equipment needs Clean, well maintained rental fleetExtensive inventory of new and used equipment
Contact the Southeastern Equipment location nearest you today!
Kentucky
Michigan
Ohio
TION EQUIPMCCONSTRU
NTETION EQUIPM
Extensive inventor Clean, well maintained rental fleet
For all your equ
y of new and used equipmentExtensive inventor Clean, well maintained rental fleet
For all your equ
y of new and used equipment Clean, well maintained rental fleet
ipment needsFor all your equ
E
ipment needs
ORMAND
Hydro excavators Sewer trucks
ood chippers W Pavers Stabilizers Recyclers Chipspreaders Asphalt distributors Street sweepers
EORMAND
Loader backhoes
Excavators
Wheel loaders
Compact excavators
Compact track loaders
Hydro excavators
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 33
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale....$85
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale ..............$85
Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale .......... $85
Bobcat E35 Compact Excavator, 1:25 Scale ................................$50
Bobcat E55 Compact Excavator, 1:25 Scale ................................$60
Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......................$25
Bobcat S175 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S510 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S550 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$65
Bobcat T550 Track Loader, 1:25 Scale............................................$70
Bobcat T770 Compact Track Loader, 1:25 Scale..........................$45
Bobcat 225 Compact Excavator, 1:25 Scale..................................$50
Case CX250C Excavator, 1:50 Scale ............................................$195
Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ....................$60
Case 580 ST Backhoe/Loader, 1:50 Scale ....................................$95
Case 1102 Vibromax Roller, 1:35 Scale ........................................$100
Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,
1:50 Scale ..........................................................................................$100
Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$110
Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale..................$65
Caterpillar D6K Track-Type Tractor, 1:50 Scale ............................$65
Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$90
Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale..........$75
Caterpillar D8T Track-Type Tractor, 1:50 Scale............................$110
Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ........$75
Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50
Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185
Caterpillar D10T Track-Type Tractor, 1:50 Scale ........................$100
Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100
Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150
Caterpillar 323D L Excavator, 1:50 Scale........................................$90
Caterpillar 336D L Excavator, 1:50 Scale........................................$95
Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..............$50
Caterpillar 365B L Series II Excavator, 1:50 Scale........................$75
Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale............$70
Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale ............$70
Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body, 1:50
Scale......................................................................................................$70
Caterpillar 963D Track Loader, 1:50 Scale ....................................$60
Caterpillar 966K Wheel Loader, 1:50 Scale....................................$95
Caterpillar 977 Traxcavator, 1:50 Scale ..........................................$60
Caterpillar 988K w/ Grapple, 1:50 Scale ......................................$160
Demag Tracked Paver (NZG), 1:50 Scale ......................................$75
Doosan Moxy MT31 Articulated Truck ........................................$100
Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150
Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ............$160
Hamm 3307 Compact Roller, 1:34 Scale ........................................$45
Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90
International 175 Crawler Loader, 4in1, 1:50 Scale ......................$65
International 433 Dual Engine Pay Scraper, 1:25 Scale ............$225
International 560 Pay Loader, 1:25 Scale ....................................$145
International TD-15 Dozer w/Umbrella, 1:50 Scale ......................$60
International TD-20E Dozer, 1:64 Scale ..........................................$24
International TD-25 Dozer w/Ripper, 1:25 Scale..........................$180
JCB 3CX Backhoe/Loader, 1:50 Scale............................................$75
John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..........$70
John Deere 200C LC Excavator, 1:50 Scale ..................................$45
John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$45
John Deere 624J Military Wheel Loader, 1:50 Scale....................$40
John Deere 772CH Motor Grader, 1:50 Scale................................$45
John Deere 959K Track Feller Buncher, 1:50 Scale ....................$90
Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45
Komatsu D51 EX Dozer, 1:50 Scale ................................................$85
Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ..........................$80
Komatsu D65PX-17 Dozer, 1:50 Scale ............................................$80
Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95
Komatsu D375A Dozer, 1:50 Scale................................................$125
Komatsu D475A Dozer w/ripper, 1:50 Scale................................$160
Komatsu GD655 Motor Grader, 1:50 Scale....................................$90
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........................$80
Komatsu HM250 Articulated Dump Truck, 1:50 Scale ................$75
Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100
Komatsu PC200 Excavator, 1:50 Scale ..........................$160
Komatsu PC490LC-10 Excavator, 1:50 Scale ................ $175
Komatsu WA470-7 Wheel Loader, 1:50 Scale ..............................$75
Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$80
Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75
Komatsu WH613 Telehandler, 1:50 Scale ......................................$65
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..........$90
Leeboy 785 Motor Grader, 1:64 Scale ............................................$90
Leeboy 8816 Asphalt Paver, 1:50 Scale..........................................$90
Liebherr R916 Litronic Excavator, 1:50 Scale ............................$150
Link Belt 800 X2 Excavator, 1:50 Scale ........................................$200
Poclain TC45 Excavator, 1:50 Scale..............................................$140
Vogele 1900-2 Tracked Paver, 1:50 Scale........................$140
Vogele MT3000 Powerfeeder, 1:50 Scale ....................................$140
Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........................$115
Volvo EC220D Excavator, 1:50 Scale............................................$115
Volvo L220G Wheel Loader, 1:50 Scale........................................$120
Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............................$90
Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$145
Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Caterpillar D7E Track-Type Tractor, 1:50 Scale - $90 International TD-14 Crawler Dozer, 1:16 Scale - $150
Page 34 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
855-44TITANtitanmachinery.com
PARTS • SERVICE • RENTALS • SALES
PUT THE POWER OF TITAN to work for you
2005 CAT D8T, Stk# 541, 9302 hrs, e/rops,a/c, heat, u/c 50% ............................$245,000
2006 CAT 330DL, 7056 hrs, a/c, u/c 65%, NewHyd Pump..........................................$119,000
2005 KOMATSU PC400 LC-7, Stk #518,7211 hrs, a/c, heat, plumbed ............$145,000
2007 DEERE 400D, Stk #646, 7655 Hrs,6WD, A/C, Tailgate ............................$165,000
EQUIPMENT SPECIALS2006 Komatsu PC300LC-7, 5973 hrs, a/c, heat, e/rops, u/c40%, Stk #428 ............................................................$119,0002005 Komatsu PC400LC-7, 8145 hrs, a/c, heat, aux hyd, u/c80%, Stk#357 ............................................................$112,0002009 Liugong CLG922, 2731 hrs, heat, a/c, u/c 60%, thumb,Stk #568 ......................................................................$69,0002009 Liugong CLG936, 1830 hrs, A/C, heat, plumbed, u/c80%, Stk #660 ............................................................$127,0002006 Cat D8T, 9820 hrs, heat a/c, e/rops, u/c 90%, Stk#647 ......................................................................................$269,0002005 Rosco RB48, 1946 hrs, e/rops, Stk #675............$20,000 2008 Liugong 842llTC, 2312 hrs, a/c, heat, 80% rubber, 2avail ........................................................................$70,000 EA.2005 Terex TA27-G7, 6695 hrs, e/rops, heat, a/c, 6x6 truck, 2avail ........................................................................$69,000 EA.2005 Deere 300D, a/c, heat, 6596 hrs, tailgate, rubber 65%,Stk#418 ......................................................................$119,0002010 LaBounty 2000R, 500 hrs, 3rd member hydraulic pro-cessing shear ................................................................$79,000
PHONE
(812) 282-2800 KENNY ACTON
(502) 639-4168
Ask about our GPS Machine Control Equipped Dozers,Graders & Excavators www.JobRentals.com
(812) 282-2882 FAX
6104 Sable Mill Court, Jeffersonville, IN 47130
Altorfer Welcomes Shaddenas Ag Sales Representative
Altorfer Inc. recently welcome ChrisShadden to the ag division as applicationsales representative. Shadden will repre-sent the RoGator and TerraGator productlines for 10 counties in Altorfer’s easternIowa territory, including Delaware,Dubuque, Jones, Jackson, Cedar, Clinton,Scott, Muscatine, Louisa and DesMoines.
Shadden joins Altorfer with more than15 years of experience in the ag industry.Most recently, he worked for a full-serv-ice farm cooperative, starting as a sprayeroperator and eventually becoming region-al manager for a location in NorthernIowa.
“We continue to diversify our salesteam,” said Jason Lenhardt, northernregional sales manager of Altorfer’s agdivision. “Chris brings many years ofcoop experience to round out the agexpertise we have amongst our salesforce.”
(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.) Chris Shadden
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 35
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
Page 36 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Indiana Department ofTransportation officials met with con-tractors, subcontractors, design engi-neers, utility company representativesand local government personnel atSeymour District offices Oct. 6 tolaunch the $16 million “diverging dia-mond” interchange project onInterstate 65 at C.R. 750North/Worthsville Road in JohnsonCounty.E & B Paving and Gradex are the
state’s prime contractors acting as ajoint venture to build this new-designinterchange to be located in PleasantTownship between C.R. 600N/TracyRoad and Greenwood’s East MainStreet. The contract calls for contrac-tors to have the interchange open totraffic by the end of next constructionseason. Earlier plans to construct the project
“under traffic” over a 2-year periodwere set aside in favor of an expeditedschedule. The city of Greenwood,Johnson County, Clark Pleasantschools and local emergency servicesagreed with INDOT officials that con-
venience to the motoring public wouldbe better served by detouring motoristsfrom Worthsville Road to the TracyRoad bridge at I-65 in order to cut theconstruction timeline in half.
Work Begins SoonPhase I realigns C.R. 200E/Graham
Road located on the west side of I-65.C.R. 200E’s intersection withWorthsville Road is to be movedapproximately 800 ft. (243 m) to thewest. INDOT’s contractor plans towork from south to north. Once relo-cated C.R. 200E reaches its junctionwith Worthsville Road, the road willclose for up to 10 days. This closureshould take place in mid-November.Phase II relocates C.R.
200E/Graham Road on the east side ofI-65 to approximately 800 ft. (243 m)north of its current position.INDOT anticipates demolition of
the existing Worthsville Road bridge atI-65 to occur during winter months —along with activities to begin buildingthe new 246-ft. (75 m) 2-span concretebeam structure over the interstate.
Initial bridge-building activitiesrequire significant excavation, gradingand dirt hauling at the construction site. Next spring, contractors and sub-
contractors will fully mobilized tocomplete the interchange and bridgereplacement project on or before thecontract’s intermediate completiondate of Nov. 20, 2015. At that time,motorists will experience a new, butproven, interchange design for betteraccess and improved safety — thefirst-of-its-kind to be built start-to-fin-ish in Indiana. This project responds to growing
safety and traffic congestion concerns.By adding I-65 access in JohnsonCounty, traffic should moderate at theMain Street and Whiteland Road inter-changes — and crash rates on I-65 andnearby access routes should decrease. For more information, visit
www.Facebook.com/INDOTSoutheast and Twitter @INDOTSoutheast.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Diverging Diamond Interchange…
Contractors Mobilize for I-65 Project
Nick Ivanoff, president and CEO of Ammann &Whitney, has been elected 2014-2015 chairman by themembers of the American Road & Transportation BuildersAssociation (ARTBA). The announcement came duringthe association’s annual national convention, held Sept. 7 to9 in Rancho Palos Verdes, Calif.Ivanoff’s career in the transportation design and con-
struction industry spans nearly 40 years. He drives strategyand development for the venerable New York City-basedengineering and architectural design firm, which hasdesigned some of the city’s most iconic superstructures.Ivanoff’s decade-long ARTBA volunteer leadership
positions include serving as senior vice chairman, first vicechairman, Northeastern Region vice chairman, two-termpresident of the International Affairs Advisory Councilchairman, Trans2020 Task Force co-chair, and two-termpresident of the Planning & Design (P&D) Division. Hisservice to ARTBA was recognized in 2005 with the “GuyKelcey Award,” which honors outstanding leadership to theP&D Division.During his acceptance speech, Ivanoff outlined several
key goals for the year ahead as chairman. First, ARTBA will continue driving the transportation
funding policy debate in the Nation’s Capitol to help ensurepost-election congressional action on a long-term and sus-tainable revenue stream for the Highway Trust Fund (HTF).Once an HTF solution is identified, the association willcontinue to lead the industry charge in advocating for a sig-
nificant boost in federal transportation investment as part ofthe reauthorization of MAP-21. “Grassroots mobilization is the key to legislative suc-
cess,” Ivanoff said. “Our members are going to have to getout there, attack Capitol Hill, and let their elected officialsknow that robust transportation investment is crucial tothe economic vitality of the country.” Ivanoff plans to leverage the 20th Anniversary of the
ARTBA Foundation’s Young Executive DevelopmentProgram to expand its leadership programs and outreach tothe next generation of industry leaders. Membership development also is key to the association’s
future growth, and Ivanoff, as a past president of theARTBA International Affairs Advisory Council, said hisfocus will be not just on companies at home, but also oninternational firms doing business in the United States.Finally, Ivanoff said ARTBA will be announcing new ini-
tiatives in the safety and risk management arenas in comingmonths. His portfolio of professional affiliations also includes
working closely with the Society of Military EngineersNYC Post, and serving as a long-standing member in sev-eral other industry organizations such as the Institute ofTransportation Engineers, American Society of CivilEngineers, and the Women’s Transportation Seminar.
(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)
Ammann & Whitney Chief Nick IvanoffElected 2014-15 ARTBA Chairman
Followed by the announcement of Peter Mayr as presidentof Liebherr Construction Equipment Co. in July 2013, thecompany’s new direction has focused on expanding its dis-tribution network and on growing its presence in the UnitedStates. Within the last year, Liebherr Construction Equipment Co.
has implemented strategic organization measures to achieveits new distribution goals. It has streamlined and reorganizedits sales and product support units to continue to strengthenits current partnerships and deliver solid support to its grow-ing distribution network.
The company also has broadened its product range offer-ings after reaching an agreement with Republic Crane &Equipment Co. earlier this year. Under this agreement,Republic Crane will cease being the national distributor ofLiebherr material-handling equipment. The new arrange-ment will create opportunities for expanded distribution byconsolidating the Liebherr product lines (earthmoving andmaterial handling equipment) into a single channel. “Along with our internal reorganization and the widening
of our product portfolio, we have been optimizing our distri-bution network and developing new partnerships… We wantto create value for our dealers and customers and ensure thatthe best available channels are in place to efficiently moveour products and services and to properly compete in newmarkets,” Mayr said. The restructuring initiatives that Liebherr Construction
Equipment Co. began in early 2013 have been pursued andintensified in 2014. Liebherr has renewed long-term part-nerships and has now extended its geographical footprintbeyond its predominantly eastern U.S. territory. TheNewport News, Va., based company has signed four newdealer agreements recently and continues to evaluate newpartnerships; ones that align with Liebherr’s core values andmeet the company’s long-term goals. For more information, visit www.liebherr.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Expansion RemainsLiebherr’s LeadingBusiness Objective
“Along with our internal reorganization and the widening
of our product portfolio, wehave been optimizing our distribution network and
developing new partnerships…”
Peter MayrLiebherr Construction Equipment Co.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 37
Annual Meeting, Convention…
NAWIC Installs National President, Board MembersThe National Association of Women in
Construction (NAWIC) installed Sandy K.Field as its 60th national president duringNAWIC’s annual meeting and conventionin Indianapolis, Ind., on Sept. 5, 2014. Field,office/HR manager of Horizon GroupInternational, has been a member ofNAWIC’s Houston, Texas, chapter since2005.“I am looking forward to next year as
NAWIC navigates through some excitingchanges, one being the redistricting of ourregions,” said Field. “The redistrictingbrings with it unlimited possibilities forNAWIC and its members. However, as withany change, it must be properly managed toenjoy a smooth, productive and effectivetransition. As president, it will be myresponsibility to see that the transition is car-ried out smoothly and in a manner that ismost beneficial to the association as awhole.”Field plans to spend her year in office
working to increase the value of a NAWICmembership.
“It has been my mantra for the past fewyears that we need to get back to the basicsof why NAWIC was founded. To ‘enhancethe success of women in the constructionindustry’ we must offer value to member-ship with programs that are relevant to theindustry and provide opportunities for pro-fessional development. One of my prioritieswill be to work with the chapters to evaluatehow we can increase the value of member-ship on the chapter level to not only bring innew members, but also retain our existingmembers.”Also during her tenure, Field plans to pro-
mote NAWIC’s mentoring programs. “Another priority of mine is mentoring
future leaders for the association. Our mem-bership is made up of very dynamic womenand we need to make sure we are buildingfuture leaders on all levels.”NAWIC also installed officers President-
Elect Riki F. Lovejoy, Greater Orlando, Fla.,Chapter; Vice President Connie M. Leipard,Central Missouri Chapter; Treasurer,Stephanie K. Crane, Greater Birmingham,
Ala., Chapter; Secretary Amy Berg, Fargo-Moorhead, N.D., Chapter; and ImmediatePast President Yasmine A. Branden,Portland, Ore., Chapter.In addition to the officers, the NAWIC
board is comprised of a national directorfrom the association’s 13 regions. Eachdirector serves a two-year term and is elect-ed by her peers to bring the wishes andneeds of the chapters to the attention of theassociation. New directors installed include:• Midwest Region (6) Director Debbie
Speake, Southwest Missouri Chapter; • North Central Region (4) Director Anne
Pfleger, Lima, Ohio, Area Chapter; • Northeast Region (14) Director
Catherine D. Schoenenberger, Granite StateChapter (New Hampshire); • Pacific Northwest Region (10) Director
Rachel Stroup, Santa Clara, Calif. Chapter; • Pacific Southwest Region Director
Lorelee Langworthy, San Diego, Calif.Chapter; and• Southeast Region (2) Director Anne
Welch, Montgomery, Ala., Chapter.NAWIC region directors serving the sec-
ond year of their term include: • Midwest Region (13) Diane I. Mike,
Greater Madison, Wis., Chapter;• Northeast Region (1) Director Sharon
B. Adkins, Hartford, Conn., Chapter; • Pacific Northwest Region (9) Director
Sarah L. Webb, South Sound, Wash.,Chapter; • South Atlantic Region (11) Director
Samantha Jane Hedgepath, Asheville, N.C.,Chapter; • South Central Region (5) Director Miki
Haas, Northshore, La., Chapter; • South Central Region (7) Director
Jennifer M. Swinney, San Antonio, Texas,Chapter; and• Southeast Region (3) Director Jill
Hanson, Tampa, Fla., Chapter.For more information, call 817/877-5551
or visit www.nawic.org.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
2012 Cat 305DCR, S/N XER01613, 142U066, 825 Hrs ..............................................................................................$50,875
2003 CAT 232, S/N CAB00656, 146U084, 3069 Hrs ..................................................................................................$17,500
2011 Cat 279C, S/N MBT01783, 146U038, 3244 Hrs ................................................................................................$37,000
2011 Case 580SN, S/N NVBC542875, 145U012, 2212 Hrs......................................................................................$67,000
2004 CAT 318CL, S/N MDY00287, 142U029....$75,350 2004 CAT 140H, S/N APM01442, 148U008, 8035 Hrs ............................................................................................$132,000
2005 Cat 950G II, S/N AXX01690, 144U020, 6452 Hrs............................................................................................$110,000
1995 Cat D5HXL, S/N 8RJ04672, 131U128, 5941 Hrs ..............................................................................................$44,550
1998 CAT D6M XL, S/N 3WN01363, 141U045 ......$49,500
Locations in Iowa, Illinois & MissouriBUY • SELL • CONSIGN • RENT
800-333-5993Bill Musgrave Ext. [email protected]
Corporate Office Cedar Rapids, IA.
Complete inventory & photos at:
www.altorfer.com
2006 Cat 324DL, S/N JJG00216, 142U105, 7596 Hrs ................................................................................$101,000
Page 38 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Page 40 • October 25, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
TD7R74 (55) 19,032 (8,633)
N/A
TD8R85 (63) 19,572 (8,878)
N/A
TD9R93 (69) 21,372 (9,694)
N/A
TD10R101 (75) 21,813 (9,894)
N/A
TD14M LGP 160 (119) 40,849 (18,529) N/A
TD14M LT 160 (119) 38,699 (17,554)N/A
TD15M LT 190 (141) 51,065 (23,163)N/A
TD15M LGP 6-WAY 190 (141) 48,874 (22,169)N/A
TD20M240 (179) 63,681 (28,886)
N/A
TD25M330 (246) 94,494 (42,862)
N/A
TD40E515 (384) 154,351 (70,014)
N/A
TD15M LANDFILL 190 (141) 53,461 (24,250)N/A
TD20M LANDFILL 240 (179) 67,197 (30,481)N/A
TD25M LANDFILL 330 (246) 95,418 (43,282)N/A
Loaders605K 110 (83) 26,940 (12,220) J. Deere PowerTech PWX 4.5 L 655K 145 (110) 40,614 (18,422) J. Deere PowerTech PVX 6068755K 190 (141.7) 45,178 (20,492) J. Deere PowerTech PVX 6068 Dozers450J 70 (52) 16,283-17,525 (7,386-7,949) J. Deere PowerTech M 4045550K 85 (63) 19,290-20,272 (8,750-9,195) J. Deere PowerTech PWX 4045650K 101 (75) 19,599-20,624 (8,890-9,355) J. Deere PowerTech PWX 4045700K 125 (93) 30,225-31,240 (13,710-14,170) J. Deere PowerTech PVX 6068750K 155-165 (116-123) 34,377-37,595 (15,593-17,053) J. Deere PowerTech PVX 6068850K 187-205 (139.5-152) 42,499-47,705 (19,295-21,684) J. Deere PowerTech PVX 6068 850K WH 200 (151) 48,906 (22,183) J. Deere PowerTech PVX 6068950J 247 (184) 56,361-59,255 (25,565-26,877) Liebherr D936-L A6 950J WH 247 (184) 58,462 (26,518) Liebherr D936-L A6 1050J 335 (250) 77,843 (35,309) Liebherr D946-L A6 1050J WH 335 (250) 80,967 (36,726) Liebherr D946-L A6 764 HSD200-210 (149-157) 34,000 (15,422) J. Deere PowerTech Plus 6068H
DRESSTA
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
Model Engine Power Weight Engine Typehp (kw) lbs. (kg)
D39EX-23 20,749 (9,410) 105 (78) Komatsu SAA4D95LE-6
D39EXi-23 20,922 (9,510) 105 (78) Komatsu SAA4D95LE-6
D39PX-23 21,675 (9,830) 105 (78) Komatsu SAA4D95LE-6
D39PXi-23 21,848 (9,931) 105 (78) Komatsu SAA4D95LE-6
D51EXi-22 27,381(12,446) 130 (97) Komatsu SA6D107E-1
D51PXi-22 29,057 (13,208) 130 (97) Komatsu SA6D107E-1
D61EX-23 39,099 (17,735) 168 (125) Komatsu SAA6D107E-2
D61EXi-23 39,441 (17,890) 168 (125) Komatsu SAA6D107E-2
D61PX-23 41,138 (18,660) 168 (125) Komatsu SAA6D107E-2
D61PXi-23 41,381 (18,770) 168 (125) Komatsu SAA6D107E-2
D65EX-17 44,355 (20,120) 205 (153) Komatsu SAA6D114E-5
D65WX-17 45,945 (20,840) 205 (153) Komatsu SAA6D114E-5
D65PX-17 47,335 (21,470) 205 (153) Komatsu SAA6D114E-5
D65EX-17 WH 48,865 (22165) 205 (153) Komatsu SAA6D114E-5
D65WX-17 WH 54,835 (24,873) 205 (153) Komatsu SAA6D114E-5
D65PX-17 WH 51,268 (23,225) 205 (153) Komatsu SAA6D114E-5
D85EX-15E0 61,950 (28,100) 264 (197) Komatsu SAA6D125E-5
D85PX-15E0 60,960 (27,650) 264 (197) Komatsu SAA6D125E-5
D85EX-15E0 SL 62,245 (28,234) 264 (197) Komatsu SAA6D125E-5
D155AX-7 87,100 (39,500) 354 (264) Komatsu SAA6D140E-6
D155AX-7 WH 91,515 (41,510) 354 (264) Komatsu SAA6D140E-6
D155AX-8 89,300 (40,500) 354 (264) Komatsu SAA6D140E-7
D275AX-5E0 113,600 (51,530) 449 (335) Komatsu SAA6D140E-5
D275AX-5E0 SL 116,528 (52,856) 449 (335) Komatsu SAA6D140E-5
D375A-6 157,940 (71,640) 610 (455 ) Komatsu SA6D170E-5
D475A-5E0 238,960 (108,390) 890 (664 ) Komatsu SDA12V140E-3
D475ASD-5E0 249,560 (113,200) 890 (664 ) Komatsu SDA12V140E-3
KOMATSU
JOHN DEEREModel Engine Power Weight Engine Typehp (kw) lbs. (kg)650L LGP 74 (55) 17,550 (7,959) CASE 445TA/EG7a Tier III650L LT 74 (55) 16,250 (7,370) CASE 445TA/EG7a Tier III650L WT 74 (55) 16,800 (7,619) CASE 445TA/EG7a Tier III750M LGP 92 (66) 21,180 (9,607) CASE F5HFL413J Tier IV Interim750M WT 92 (66) 20,679 (9,379) CASE F5HFL413J Tier IV Interim750M LT 92 (66) 20,040 (9,089) CASE F5HFL413J Tier IV Interim850M LGP 112 (84) 22,830 (10,355) CASE F4HFE413P Tier IV Interim850M WT 112 (84) 22,330 (10,129) CASE F4HFE413P Tier IV Interim850M LT 112 (84) 21,560 (9,779) CASE F4HFE413P Tier IV Interim1150M LGP 127 (95) 32,637 (14,804) CASE F4HFE613F Tier IV Interim1150M WT 127 (95) 32,174 (14,594) CASE F4HFE613F Tier IV Interim1150M LT 127 (95) 31,134 (14,122) CASE F4HFE613F Tier IV Interim1650M LGP 150 (112) 39,550 (17,939) CASE F4HFE6132 Tier IV Interim1650M WT 150 (112) 38,650 (17,531) CASE F4HFE6132 Tier IV Interim1650M XLT 150 (112) 37,750 (17,123) CASE F4HFE6132 Tier IV Interim2050M LGP 214 (160) 48,773 (22,123) CASE F4HFE613W Tier IV Interim2050M WT 214 (160) 46,891 (21,269) CASE F4HFE613W Tier IV Interim2050M XLT 214 (160) 45,414 (20,599) CASE F4HFE613W Tier IV Interim2050M LT 214 (160) 44,563 (20,213) CASE F4HFE613W Tier IV Interim
CASE
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)LIEBHERR
Crawler Loaders
LR 624141 (105) 37,245-40,893 (16,894-18,549) D 934 S A6
LR 634173 (129) 45,737-50,032 (20,746-22,694) D 934 L A6
DozersPR 724
161 (120) 36,729-39,738 (16,659-18,024) D 934 L A6
PR 736201 (150) 44,530-54,230 (20,200-24,600) D 934 A7
PR 746248 (185) 63,710-67,900 (28,900-30,800) D 936 A7
PR 756336 (250) 84,430-90,720 (38,300-41,150) D 946 A7
PR 764416 (310) 97,490-116,150 (44,220-52,685) D 9508 A7A7
see CHART page 47
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2014 • Page 41
IT’S GOT YOUR FINGERPRINTS ALL OVER IT.
Like all of our equipment, the850K was designed with exten-sive input by owners and oper-ators like you. We listened andresponded with numerous K-Series enhancements, includ-ing additional power and weightfor increased productivity. AnEPA Interim Tier 4 diesel enginefor work in nonattainmentareas. Spacious redesigned cabthat’s noticeably quieter andmore comfortable. And best-in-class serviceability features,such as an innovative easy-to-clean “V-Cool” package. Add tothose, the unsurpassed operat-ing ease and maneuverabilityoperators have come to expectfrom our crawlers, and the850K is an obvious choice. To get your hands on one, see your John Deere dealer.
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Grand Rapids600 44th Street S.W.Grand Rapids, MI
49548616/538-2400
Fax: 616/538-0449
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
West Detroit56555 Pontiac Trail
New Hudson, MI 48165 248/437-8121
1-800/457-8121
Traverse City8300 M-72 EastWilliamsburg, MI
49690231/267-5060
Fax: 231/267-5257
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
Rockdale, IL 60436815/730-9011
1-800/937-3355Fax: 815/730-9036
Rockford, IL 61102815/961-3160
Fax: 815/965-1810
South Holland, IL60473
708/331-6362Fax: 708/331-7334
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
Fort Wayne, IN 46808260/482-8576
Fax: 260/483-4057
Indianapolis, IN 46219317/544-3411
Fax: 317/544-3420
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Waterloo, IA800/772-2019
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Park City, KS800/262-0139
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
North Platte, NE800/894-7060
Omaha, NE800/416-5095
Brunswick, OH800/716-9796
Cambridge, OH 740/439-2747
Canton, OH866/235-0438
Chillicothe, OH 740/663-5300
Cincinnati, OH800/844-3734
Columbus, OH800/222-2010
Lima, OH800/423-7445
Painesville, OH866/800-1398
Poland(Youngstown), OH
866/503-7259
Vandalia (Dayton),OH
800/233-4228
Cranberry Twp, PA724/776-3636
Greensburg, PA724/837-4500
Ashland, WI715/682-5522
Chippewa Falls, WI715/834-2924
Monico, WI715/487-5583
Mosinee, WI715/693-3820
Duluth, MN218/722-7456
Bemidji, MN218/759-1996
Grand Rapids, MN218/326-9427
Escanaba, MI906/789-9054
Louisville, KY502/253-3721
Richmond, KY859/623-2030
Bowling Green, KY270/842-3400
London, KY606/862-8447
www.westsidetractorsales.com www.murphytractor.com
,
,
,
D
B
2
2
a
E
www.nortrax.com www.brookstractor.comSun Prairie
1900 W. Main St.P.O. Box 9
Sun Prairie, WI 53590608-837-5141
Milwaukee12101 W. Silver Spring Dr.
Milwaukee, WI 53225414-462-9790
De Pere1031 Lawrence Dr.De Pere, WI 54115
920-336-5711
West Salem451 W. Avenue N.
West Salem, WI 54669608-786-2644
Plover5429 Prairie Dr.Plover, WI 54467
715-254-2777
Page 42 • October 25, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Liebherr’s Newly Designed Generation6 Offers Reduced Fuel Consumption
Liebherr’s Generation 6 PR 736dozer has an operating weight between44,000 and 55,000 lb. (20,000 and25,000 kg) and has been newlydesigned for increased efficiency andfor reduced fuel consumption and CO2emissions.
This model features an electronical-ly-regulated travel drive with an inte-gral eco-function. When the operatorchooses between high-performancepotential and maximum economy, thesystem automatically selects the opti-mal setting for economical operation ofall travel-drive components.
Proactive power control is anotherGeneration 6 innovation. Travel drivesettings adjust automatically when theoperator selects a different level ofspeed by the joystick, which preparesthe power train for higher performancedemands. In addition to fast response,this new dozer offers increased per-formance potential.
To simplify the use of automaticmachine control systems, Liebherr sup-plies pre-installation kits for leadingmanufacturers’ systems. The automaticmachine control system provides theoperator with accurate guidance inorder to maintain consistent gradingquality.
Like all Liebherr dozers and loaders,the PR 736 features a hydrostatic trans-mission. This efficient driveline keepsthe engine speed at a constant level ofperformance. Power train componentsand Liebherr’s intuitive engine man-agement system match perfectly inorder to achieve high efficiency andlower fuel consumption, according tothe manufacturer.
The new PR 736 is equipped withseveral features that expedite and sim-plify service procedures. These includecentrally located maintenance points,access flaps and engine compartmentdoors that open to a wide angle. Themachine’s tilting cab is standard, andan optional radiator that can be swungout for cleaning is available.
The new PR 736 has long mainte-nance intervals for operating fluids.Depending on the nature of the work,and provided that regular qualitychecks are being performed, thehydraulic fluid interval can be as longas 8,000 hours of operation.
The standard Liebherr fleet manage-ment system LiDAT provides an accu-rate, efficient overview of essentialservicing work, warning messages, the
machine’s position and actual con-sumption data and filling levels.Depending on the customer needs, thedata is updated several times a day andcan be retrieved when needed bymeans of a web browser. An automaticalarm function also can be selected inthe event of a machine leaving its pre-determined zone or if a critical operat-ing situation arises.
Extended Track Life, HighComfort in Operation
The track assemblies for Generation6 dozers also have been redesigned. Inorder to extend the operating life of thetrack and the sprocket, the drivesprockets are now of larger diameterwith more teeth in mesh. When operat-ing in abrasive surfaces, optional trackassemblies with rotary bushings areavailable. In addition to being 100 per-cent exchangeable, they prolong thereplacement intervals for this specifictype of work.
With its downward-angled bodypanel edges and panoramic windowsthat include the door area, the PR 736provides the operator with a completeview of the machine’s working attach-ments and the surrounding terrain. Theexhaust system is entirely concealed bythe A-post so that the operator’s view isunobstructed. Increased visibilityallows for more efficient machine oper-ation and promotes safety.
The PR 736’s operator cab has been
newly designed. The operator canmove the ergonomically-shaped travelcontrols to the most convenient posi-tion. An integral contact switch in thecomfortable seat identifies the opera-tor’s presence automatically withoutthe need for a safety lever to beengaged. The desired travel speed canbe preselected with without shiftinggears. The speed can be saved in thememory when direct selection is need-ed.
The PR 736 is equipped standardwith a touch-controlled display. Thetouch screen is the interface for the newcontrol structure for modular construc-tion. Additional options such as revers-ing cameras can be incorporated on thisscreen, as well as functions designedfor further comfort such as air condi-tioning control. The PR 736 can beequipped with alternative operatorinterfaces, with an inching brake pedalor different control levers.
High-performance LEDs illuminatethe work area effectively, even in unfa-vorable conditions. The modular light-ing concept is integrated into the PR736’s redesigned bodywork and can bechosen specifically to suit the applica-tions that the machine will perform.
For more information, visitwww.Liebherr.us.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Liebherr’s Generation 6 PR 736 dozer has an operating weight between44,000 and 55,000 lb. (20,000 and 25,000 kg).
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax
CONTINENTAL EQUIPMENT CORP.A division of AISwww.ceceq.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8611800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA515/282-0404800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2014 • Page 43
DOZERSFrom Komatsu – The Dozer Experts
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville, WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 Main AveFargo, ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND, 58701800/825-04793500 Apple Creek RoadBismarck, ND 58504800/852-04794082 2nd Ave. WWilliston, ND 58801701/572-0570
Page 44 • October 25, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
To provide ongoing support for its familyof intelligent Machine Control (iMC) doz-ers, Komatsu America distributors have spe-cially-trained technology solutions experts(TSE) on staff. Every customer who pur-chases a Komatsu iMC dozer has the supportof a TSE, based at the distributor. The TSEsare supported by the dedicated intelligentMachine Control team at Komatsu AmericaCorp.
“Introducing and providing a dedicatedsupport position for our iMC machinesexemplifies the kind of service that our cus-tomers have come to expect from Komatsu,”said Jason Anetsberger, iMC product man-ager, Komatsu America Corp. Each technol-ogy solutions expert must undergo an exten-sive training program and is directly certifiedby Komatsu America before working as theTSE for a Komatsu distributor. The primaryrole of the TSE is intelligent MachineControl product training and support.
Bill Hankins, a TSE of The LyleMachinery Company in Columbus, Miss.,said, “As the TSE for my company, I’m the
one contact for our iMC customers. I’vereceived extensive training from theKomatsu factory, and I’m the expert whogoes out in the field to work with customers.I also serve as the primary contact for anyquestions our iMC customers might have.
“When you purchase this machine fromKomatsu and your local dealer, you’re notjust buying a machine. You’re buying a sup-port package that has very well-trained peo-ple lined up from coast-to-coast and border-to-border who are there whenever our cus-tomers need us.”
In the past — without integrated iMCtechnology — if a customer encountered aproblem or issue related to the machine or itsgrading performance, they had multiple con-tacts for support and input. Customers whopurchase a Komatsu machine with intelli-gent Machine Control technology now havethe ease of a single primary contact (theirTSE) for any questions and support.
With fully automatic blade control,Komatsu iMC dozers perform rough dozingas well as finish grading in automatic mode.When rough dozing, the automatic blade
control monitors blade load and adjustsblade elevation to minimize track slip andperform high-efficiency dozing. As workprogresses to the target finish grade, theautomatic blade control adjusts accordinglyto provide finish grade performance.
Following its successful launch of theD61i-23 in 2013, Komatsu recently intro-duced three additional iMC dozers into theNorth American market including the D51i-22, D39i-23 and D37i-23. The companynow offers four different size iMC dozers.
Jason Anetsberger of Komatsu Americasaid, “The included value of a technologysolutions expert, in addition to the addedintelligence, innovation and integrationavailable in these dozers significantlyincreases the value proposition, for bothexisting machine control users and newmachine control users.”
For more information, visit www.komat-suamerica.com.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
“Introducing and providing a dedicated supportposition for our iMC machines exemplifies the kindof service that our customers have come to expectfrom Komatsu.”
Jason AnetsbergerKomatsu America Corp.
Dedicated Support…
Komatsu Provides Specially Trained Experts for iMC Dozers
» The #1 Selling Rubber Track Brand In America! »
Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland, OR » Sacramento, CA » Schenectady, NY
Order online anytime » depparts.com »800-365-7260
WE ACCEPT
We Keep Equipment Moving!Call me today, I’ll be glad to help you!
~ Shannon
Bobcat®, Gehl®,Mustang®, Takeuchi®,CAT®279, 289 & 299
REPLACEMENT UNDERCARRIAGE
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2014 • Page 45
Page 46 • October 25, 2014 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide
Critical Decisions Make All the Difference in Dozer LifespansBy Giles LambertsonCEG CORRESPONDENT
Bulldozers are tough machines, and own-ers and operators can extend their machines’working lives by making critical decisionsabout their undercarriage. The decisionsbegin before a new machine is ordered fromthe dealership.“One type of undercarriage does not fit all
applications,” warned Tim Nenne, aCaterpillar undercarriage market profession-al. Nenne began working with drivetrain andundercarriage issues at the Caterpillar TechCenter almost 25 years ago. “Now, we’reoffering more undercarriage than everbefore.”
Same, But DifferentWhy offer undercarriage variations? It’s
true that in the rumbling world of trackedequipment, the machines have some thingsin common. The continuous steel or rubbertracks that move dozers, excavators, mobilecranes, track loaders of all sizes, and othermachinery all have sprockets that drivelinked plates with raised grousers for trac-tion. The chained shoes cycle across idlersand rollers and under road wheels … aroundand around and around. But there are differences in the machines,
too. How a piece of equipment is used varieswidely and undercarriage reflects that.Consider dozers and excavators, two of themainstay pieces of equipment in any earth-moving contractor’s yard: They have greatlydifferent undercarriage requirements. Adozer and excavator can be operated side byside in a pit or a site preparation project andtheir undercarriage experiences much differ-ent stresses.Dozers have to be moving across a job
site to be productive. Sitting still, a dozer isjust a lump of iron. Until its blade startspushing or its ripper ripping, it might as wellbe a big boulder. However, an excavator canrumble up to a dig site, the tracks on themachine stop moving and subsequently notexperience a full revolution for an extendedtime. Yet while the tracks are mostly still, themachine is busy digging a hole with itsscoop, or swinging over and dropping a con-crete box into a hole using its boom, or load-ing trucks from a replenishing pile of mate-rial.“An excavator undercarriage is mostly
just a platform,” Nenne explained, so the liferollers and link assemblies on excavators candiffer greatly from those on dozers. On theother hand, undercarriage on track loadersmore or less replicates the technology on,say, a D6, because the two machines’ func-tion is more-or-less the same.
How Is It Used?So the first critical undercarriage decision
for a contractor buying a piece of trackedequipment is to know how it will be used. “The big thing is this: Choose the under-
carriage that best meets all of your needs,”Nenne said. “Consider the machine type, themachine’s application, the material it will beworking in, even your financial situation.Choose the undercarriage that will providethe best performance. “It always comes back to choosing the
right undercarriage,” he said. “You savemajor dollars in the end if you choose cor-rectly. It eventually will come back and costyou more if you don’t.” Nenne added that the most common error
a contractor makes is not fully specifying theweight of the machine to be carried on anundercarriage. It might be a 25-ton dozer asa base model, but one blade or another canalter the weight, as can the addition of a rip-per or a winch. The total machine weight isthe operative number in choosing the rightundercarriage set-up.The next most important consideration for
selecting an undercarriage is the conditionsin which it will be operated. “It is so important to understand the appli-
cation of a machine,” Nenne said. “Whattype of material will it be running in? Whatlevel of abrasion will there be? What areyour hours of use for the machine? Howlong do you plan to keep it? All of that deter-mines which undercarriage to choose.”That’s why Caterpillar developed a new
General Duty line of undercarriage, which
Nenne described as the “Volkswagen” line,an allusion to the economical but well-engi-neered VW “Bug” the German manufactur-er introduced to the United States in the1960s. General Duty is the lowest-costundercarriage option and will meet the needsof contractors in general purpose, moderate-use dozer situations.Cat Heavy Duty Undercarriage targets
most Cat customers and is for machines thatare operated many hours a day, every day —the high-production machines found onmany work sites. Cat SystemOneUndercarriage is the third option and also isaimed at high-use machines. However,SystemOne incorporates rotating bushingsand extended-life sprockets, idlers and
rollers. The system reduces maintenancecosts and lengthens the operating life of var-ious components.So from day one a buyer makes numerous
set-up decisions that will affect the bottomline. Example: A dozer to be operated inforestry work, crawling over stumps andsuch, needs a heftier undercarriage than oneloading some gravel now and then in anequipment yard. Another example: The typeof soil underneath the operating machineand the degree of slope at a work site candetermine whether to use standard track,wide track, or low ground compaction shoes.And so on.In the end, there are consequences from
having the wrong undercarriage on amachine. Nenne said the consequences canbecome evident in pretty short order. “If it’s a matter of a shoe width error, you
might notice that in the first hour whenthere’s a buildup of packed material in theundercarriage.” Other misjudgments may not show up for
a month or more as parts begin to break orbecome dysfunctional under stress.
Operator, Maintenance ErrorsYet even when a tracked machine has an
appropriate undercarriage, problems still candevelop if an operator fails to follow best-practices in the driver’s seat. Nenne said themost frequent failing of this type is habitualuse of a big tracked machine for nonessentialtravel.“Don’t use a tractor as a pickup truck,” he
said. “They are very expensive to move. Forexample, don’t drive the machine across ajob site to get it fueled. Drive the fuel truckto it. It is not the number of hours that wearsout an undercarriage, it is the number ofmiles or kilometers. Limit the miles, limitthe amount of movement.”The kind of movement also can exact a
toll on an undercarriage. Nenne recommend-ed that operators limit high-speed reversemovement, or limit traveling in reverse ingeneral. While SystemOne handles high-speed reverse better than other systems,additional bushing wear always occurs whena machine is traveling backward on itstracks. Another tip: Turning a dozer in thesame direction all the time causes unevenwear on undercarriage components, so oper-ators should try to alternate their turns.“An operator has the ability to make or
break an undercarriage,” Nenne said. Hesaid most operator abuse or misuse of atracked machine occurs on rubber-trackedmini-loaders, which are apt to be run by less-trained operators. But owners of huge dozers
Tim Nenne is a Caterpillar undercarriage market professional. Nenne beganworking with drivetrain and undercarriage issues at the Caterpillar Tech Centeralmost 25 years ago.
see CATERPILLAR page 47
“It always comesback to choosing theright undercarriage.You save major dollars in the end if you choose correctly…”
Tim NenneCaterpillar
Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2014 • Page 47
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
CATERPILLAR
Crawler Dozers LGP
D3K2 LGP 80 (60) 18,525 (8,403) Cat C4.4 ACERT
D4K2 LGP 92 (68) 18,761 (8,510) Cat C4.4 ACERT
D5K2 LGP 104 (78) 21,266 (9,646) Cat C4.4 ACERT
D6K LGP 125 (93) 29,690 (13,467) Cat C6.6 ACERT
D6K2 LGP 130 (97) 30,574 (13,868) Cat C6.6 ACERT
D6N DS-LGP 150 (112) 39,112 (17,741) C6.6 ACERT
D6N DS-LGP (Tier IVi) 150 (112) 39,646 (17,983) Cat C6.6 ACERT
D6N DS-LGP waste handler 150 (112) 42,454 (19,257) Cat C6.6 ACERT
D6N DS-LGP waste handler (Tier IVi)150 (112) 19,499 (8,845) Cat C6.6 ACERT
Medium Crawler Dozers LGP
D6T LGP 205 (152.9) 49,489 (22,447) Cat C9.3 ACERT
D6T LGP waste handler 205 (152.9) 54,791 (24,852) Cat C9.3 ACERT
D7E LGP 235 (175.2) 62,886 (28,524) Cat C9.3 ACERT
D7E LGP waste handler 235 (175.2) 68,123 (30,900) Cat C9.3 ACERT
D8T LGP 310 (231.2) 87,733 (39,795) Cat C15 ACERT
D8T LGP waste handler 310 (231.2) 91,270 (41,399) Cat C15 ACERT
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
CATERPILLAR CONTD.
Crawler Dozers Non LGP
D3K2 XL 80 (60) 17,544 (7,958) Cat C4.4 ACERT
D4K2 XL 92 (69) 18,080 (8,201) Cat C4.4 ACERT
D5K2 XL 104 (78) 20,534 (9,314) Cat C4.4 ACERT
D6K XL 125 (93) 28,409 (12,886) Cat C6.6 ACERT
D6K2 XL 130 (97) 29,346 (13,311) Cat C6.6 ACERT
D6N DS-XL 150 (112) 36,392 (16,507) Cat C6.6 ACERT
D6N XL Tier IVi 150 (112) 36.392 (16,507) Cat C6.6 ACERT
D6N XL Waste Handler 150 (112) 38,224 (17,338) Cat C6.6 ACERT
D6N XL Waste Handler Tier IVi 150 (112) 38,224 (17,338) Cat C6.6 ACERT
D6T XL (Tier IVF) 207 (154) 46,263 (20,985) Cat C9.3 ACERT
D6T XL Waste Handler (Tier IVF) 207 (154) 51,563 (23,389) Cat C9.3 ACERT
D6T XW (Tier IVF) 207 (154) 48,034 (21,788) Cat C9.3 ACERT
D7E235 (175) 57,441 (26,055) Cat C9.3 ACERT
D7E Waste Handler 235 (175) 63,537 (28,820) Cat C9.3 ACERT
D8T310 (231) 87,733 (39,795) Cat C15 ACERT
D8T Waste Handler 310 (231) 85,650 (38,850) Cat C15 ACERT
D9T410 (306) 94,265 (42,758) Cat C18 ACERT
D9T Waste Handler 410 (306) 109,705 (49,761) Cat C18 ACERT
D10T580 (433) 146,499 (66,451) Cat C27 ACERT
D10T Waste Handler 580 (433) 144,986 (65,765) Cat C27 ACERT
D11T850 (634) 208,589 (94,614) Cat C32 ACERT
D11T CD 850 (634) 220,385 (99,965) Cat C32 ACERT
D10T2600 (447) 139,010 (63,054) Cat C27 ACERT
D9T (Tier IV Final) 436 (325) 95,917 (43,507) Cat C18 ACERT
D9T Waste Handler (Tier IVF) 436 (325) 110,471 (50,109) Cat C18 ACERT
CHART from page 40
Simply Cleaning Debris From Undercarriage Lowers Costsalso can incur extra operation and mainte-nance costs when jockeys operate themachines inefficiently.Field service personnel or shop mechan-
ics have a checklist of inspections for anundercarriage, and Nenne believes track ten-sion is checkpoint number one. If the linksare too tight, the system wears more quicklyand more fuel is expended. Proper tensiondepends on the application and working con-ditions.“Checking the track tension is the single
biggest thing you can do,” Nenne said. “Youcan’t control an application of a machine oroperating conditions, but you can controltrack tension.”He said operators have the first responsi-
bility to keep the track properly tensed. Ifworking in dust in the morning turns toworking in sticky conditions after a rainshower, an adjustment in the tension may berequired to optimize performance. “When conditions change, you have to
think about doing an adjustment. It’s proba-bly a half-hour job, but the cost of not doingit over the period of operation can be quitehigh.”
Components of the undercarriage weardifferently under different conditions. In ahigh-impact environment of hard rock,grousers will wear out quicker. If lots of sand— particularly wet sand — is runningthrough the undercarriage, bushing wear isaccelerated. In working in especially pack-able soils or refuse, material can get wedgedinto undercarriage areas and cause compo-nents to engage improperly and increasewear.Nenne said the simple act of cleaning out
debris from the undercarriage at the end of awork day will help keep down operatingcosts. He adds that engineering attempts toseal off critical undercarriage componentsfrom such debris haven’t worked. “A lot ofpeople have tried to keep material awayfrom parts, but if you do too much of that, itkeeps debris in instead of keeping it out. Youcan overprotect.”
Bottom LineThe rule of thumb is that an undercarriage
will absorb half of the cost of operating atracked machine. Nenne was asked if per-haps that ratio of expense didn’t shift some-what after the Tier IV regime increased thecost of engines and emission controls.
“I would say that it hasn’t changed,” hesaid. “Tier IV is an upfront cost for a buyer,but when you look at operating costs, theundercarriage is still going to come in at 50percent.”When a contractor opts to purchase a used
dozer or other tracked machine, the condi-tion of its undercarriage becomes a criticalissue. Nenne said it is possible to correctly
determine the working condition of anundercarriage by inspecting for dry jointsand other indicators of wearing and aging.Knowing the conditions in which themachine operated — sand or rock versusloamy soil — also can signal how much lifethe undercarriage still has in it.Nenne has no predictions about a future
mechanical system that will replace the tracksystem, which dates back more than a centu-ry in its modern form. But the Cat undercar-riage specialist said the manufacturer is pro-ducing undercarriages for some foreign mar-kets that have rubber-coated and sound-deadening components, which suggests thefamiliar clanking of a passing dozer mightbecome a thing of the past. “That undercarriage is more expensive
and harder to produce, but sound reductionin some parts of the world is important tocustomers so it has become a big part of ourthinking at this time.”For contractors focused on keeping down
costs, holding down noise might be a lesserconcern.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG
CATERPILLAR from page 46
“Checking the tracktension is the singlebiggest thing youcan do.”
Tim NenneCaterpillar
Page 48 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 49
Page 50 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Work on Eastbound George V. Voinovich Bridge Beginsengineer. “The joint-venture team tookadvantage of this opportunity to propose adesign that simplifies fabrication and erec-tion. Rather than providing an integrateddelta girder shape, the TGR design separatesthe delta girder from the plate girder portionof the superstructure, and places bearingsbetween these two elements.“This results in an independent delta gird-
er that is post-tensioned to the pier, and has aseparate tension tie across the top,” headded. “Bearings are placed atop this deltagirder to support a ‘conventional’ plate gird-er superstructure.”Nick Graczyk, project engineer of
Trumbull Corp., said that the new designeliminates the need for complex temporaryworks to support and position the legs of thedelta frame during steel erection.“This will prove to be a more economical
design with cost savings from the design,fabrication and erection of the temporaryworks, as well as expediting the structuralsteel erection schedule,” he said. “The newdesign also simplifies the interface betweenthe delta leg and the plate girder superstruc-ture. It eliminates the complex fixed connec-tion of the westbound bridge which will sim-plify steel erection and fabrication.“It will also eliminate the ‘oversized’ field
sections that were required for the west-bound bridge,” he added. “Each section ofthe eastbound bridge will be able to be trans-
ported in an upright position, which is amore ‘conventional’ delivery method. Thiswill simplify the handling of the sections inthe shop and on site, as well as save in deliv-ery cost.”Asked about the challenges that are antic-
ipated, Stroh points out that the viaduct ofthe GVV Bridge is a continuous superstruc-ture over its nearly 3,000 ft. (914 m) length,with no intermediate expansion joints. “Its superstructure is comprised of a gird-
er and sub stringer floor system, and thedelta girder supporting elements,” he said.“The analysis must be a fully integrated 3Dmodel that accommodates the entire 3,000foot bridge length. This places special chal-lenges on the computer modeling and analy-sis of the structure. URS is utilizing LARSAsoftware for this analysis and has developeda detailed computer model that accounts forthe complex bridge geometry and integratesloading, and design/code checking capabili-ties into a single model.”The crews from the joint-venture also
have determined some of the challenges theywill have to overcome, including the soil sta-
bility of the west slope during demolition ofthe existing bridge and construction of thenew bridge.“Detailed analyses and monitoring will be
performed to check each of the loading con-ditions (earth and equipment loads) that theslope will encounter during demolition andconstruction,” said Graczyk. “The pile driv-ing operation for the new foundations of thebridge piers also will present challenges dur-ing construction. The design specifies thelargest H-pile section rolled in the industry[HP18x204] at a total length of 180 feet.TGR will use a 300T crawler crane[Manitowoc 2250 Series III] to suspend theleads and hydraulic hammer for the initial
The new bridge will require a vast amount of mate-rial, including: 11 million lbs. (5 million kg) of Hpile, 37 million lbs. (16.8 million kg) of structuralsteel, 11 million lbs. of rebar and 7,400 trucks fullof concrete.
see BRIDGE page 74
BRIDGE from page 1
In addition to the span being impacted by the geographic constraints of the Cuyahoga Riverand west slope, the project will have to deal with issues posed by the operations of the CSXrailroad, Norfolk Southern elevated train trestle, Greater Cleveland Regional Transit Authorityrail and others which present significant challenges for steel erection.
“The joint-ventureteam took advantage of thisopportunity to propose a designthat simplifies fabrication anderection.
Steve StrohURS
The crews from the joint-venture also have determined some of the chal-lenges they will have to overcome, including the soil stability of the westslope during demolition of the existing bridge and construction of thenew bridge.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 51
CALL FOR DEMO AND PRICING
Looking for power?
Hyundai machines come standard with the industry’s best warranty. That’s the power of reliability, the key to your long-term success.
Learn more at hceamericas.com.
ILLINOISDiamond Equipment
17035 N. Illinois Hwy. 37Mt. Vernon, IL 62864
618-242-2273800-388-6396
Fax: 618-242-9161
KENTUCKYDiamond Equipment
1046 Lovers LaneBowling Green, KY 42103
270-781-1061800-489-1061
Fax: 270-781-0907
Diamond Equipment1060 Diamond Ave.Evansville, IN 47711
812-425-4428dmfortune
@diamondequipment.comwww.diamondequipment.com
2000 Harlan DriveTerry Haute, IN 47802
812-299-4747888-343-4747
Fax: 812-299-3687
Hardings Heavy Equipment109 W. Commercial Ave.
Lowell, IN 46356219-696-8911
Southeastern Equipment Co.,Inc.
3333 W. Coliseum Blvd.Fort Wayne, IN 46808
260-483-8868
4951 West 96th StreetIndianapolis, IN 46268
317-872-4877www.southeasternequip.com
Rueter’swww.rueterco.com
1132 31st Ave.Council Bluffs, IA 51401
712-366-5221Fax: 712-366-5228
5815 Lincoln WayAmes, IA 50014
515-268-0939Fax: 515-268-0943
Hwy 30 WestGrand Junction, IA 50107
515-738-2571Fax: 515-738-2343
Hwy 30 EastCarroll, IA 51401
712-792-9294Fax: 712-792-6808
2425 NE 126th Ave.Elkhart, IA 50073
515-367-3054
KANSASThe Victor L. Phillips Co.
www.vlpco.com3250 N. Hydraulic St.Witchita, KS 67219
316-838-3347
1305 SW 42nd St.Topeka, KS 66609
785-267-4345
2203 Jones Ave.Garden City, KS 67846
620-275-1996
NEBRASKARueter’s
www.rueterco.comE. Hwy 275
Neligh, NE 68756402- 887-5638
Fax: 402-887-5638
MICHIGANMidland Engine
622 Jefferson Ave.Midland, MI 48640
989-631-4608www.midlandengine.com
MISSOURIThe Victor L. Phillips Co.
www.vlpco.com4100 Gardner Ave.
Kansas City, MO 64120816-241-9290
5430 Missouri 43Joplin, MO 64804
417-781-8222
6330 W. Highway 60Brookline Station, MO 65802
417-887-2729
IOWAINDIANA
Page 52 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ILLINOISBobcat of St. Louis
Fairview Heights618-397-1847
www.bobcatofstl.com
INDIANATri-County Equipment
Evansville812-422-8200
www.tri-countyequip.com
Tri-County EquipmentPoseyville
812-874-2231www.tri-countyequip.com
IOWABobcat of Cedar Rapids
Burlington319-752-9999
Cedar Rapids319-393-2820
Davenport563-381-1200
Iowa City319-248-1130
www.rexcobobcat.com
Bryan Heavy Equipment, Inc.Oelwein
319-283-2345www.bryanheavyequipment.com
KANSASWhite Star Machinery
Garden City620-277-2290
Manhattan785-537-9979
Topeka785-232-7731
Wichita316-838-3321
www.whitestarmachinery.com
KENTUCKYBobcat of Bowling Green
Bowling Green270-842-4253
www.bgbobcat.com
Bobcat EnterprisesLexington
859-254-3936 • 800-4BOBCAT
Louisville502-245-1911 • 800-4BOBCAT
www.bobcat-ent.com
MINNESOTABobcat of Bemidji
Bemidji218-751-4660
www.bobcatofbemidji.com
Bobcat of Otter Tail CountyFergus Falls218-739-4505
www.bobcatofottertail.com
Bobcat of RochesterStewartville507-285-0753
www.bobcatofrochester.com
Crawford’s Equipment, Inc.Cambridge
763-689-1794www.crawfordsequip.com
Farm-Rite Equipment, Inc.Dassel
320-275-2737 • 888-679-4857
Willmar320-235-3672 • 877-484-3211
www.farmriteequip.com
Lano Equipment, Inc.Anoka
763-323-1720
Loretto763-479-8200
Shakopee952-445-6310
www.lanoequip.com
Lano Equipment of NorwoodNorwood Young America
952-467-2181www.lanoequipofnorwood.com
Tri-State BobcatBurnsville
952-894-0894
Little Canada651-407-3727 • 877-331-0298
www.tristatebobcat.com
MISSOURIBobcat of St. Louis
Columbia573-886-9435
O’Fallon636-240-9020
Valley Park636-225-2900
www.bobcatofstl.com
NORTH DAKOTABobcat of Devils Lake
Devils Lake701-662-5331
www.goironhide.com
Bobcat of Grand ForksGrand Forks701-772-5006
www.goironhide.com
Bobcat of WillistonWilliston
701-572-5050www.goironhide.com
NEBRASKAMerz Farm Equipment
Falls City402-245-2419
www.merzfarmequipment.com
OHIOBobcat Enterprises
Cincinnati513-874-8945 • 800-4BOBCAT
Columbus614-876-1116 • 800-4BOBCAT
Mt. Orab937-444-3865 • 800-4BOBCAT
www.bobcat-ent.com
Bobcat of DaytonDayton
937-293-3176 • 800-BOBCATS
Troy937-335-5287
www.bobcatofdayton.com
SOUTH DAKOTAPremier Equipment, LLC
Huron605-352-7100
WISCONSINBobcat Plus, Inc.
Appleton920-380-1170
Butler262-781-1199
Chippewa Falls715-720-0300
DePere920-983-2100
www.bobcatplus.com
Komro Sales & Service Incorporated
Durand715-672-4263
Peterson Implement, Inc.Whitehall
715-538-4381www.petersonimplement.com
Ritchie Implement, Inc.Cobb
608-623-2331www.ritchiesinc.com
Tri-State BobcatHudson
715-531-0801 • 866-268-2418www.tristatebobcat.com
Authorized Bobcat Dealers
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 53
Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2014 Bobcat Company. All Rights Reserved. | 1204AD-0
SEE WHO WINS GOING HEAD-TO-HEAD.Do you want to see how compact excavators perform in head-to-head competitions or watch side-by-side comparisons relating to performance, serviceability and durability? Before you buy your next excavator, watch our video comparisons of excavators. Not only do the videos show you which excavator is best, they explain the small details that increase your performance and reduce your downtime. You can watch all the videos at BobcatAdvantage.com/FaceOff11 or scan the code and fi nd out who comes out on top.
ONE VS MANYCOMPACT EXCAVATORS FACE OFF
BobcatAdvantage.com/FaceOff11
Page 54 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Bobcat Company Names Winners of Million Loaders ContestA second-generation Bobcat compact
equipment owner received the surprise of hislife by being honored with a special editionone-millionth Bobcat T650 compact trackloader during Bobcat Company’s“Unstoppable” campaign and MillionLoaders Celebration contest. Steven Klumker, of Mancos, Colo., visit-
ed the Bobcat of Durango equipment dealer-ship thinking he was being interviewed as afinalist for the contest. Instead, he was hand-ed over the grand prize with his family onhand to celebrate with him. “This is a dream come true for me —
Bobcat machines have been our family’slivelihood and our lifestyle my entire life,”Klumker said after the “reveal.” “And I can-not wait to show this loader off.”Klumker’s entry was selected from more
than 12,000 that came in over six months,based on his answer to the question, “Howdoes Bobcat make you unstoppable?”“Steve’s was exactly the type of entry we
were looking for,” said Gary Hornbacher,Bobcat Company vice president of sales andmarketing. “He described how Bobcatequipment has helped his entire family —first- and second-generation Bobcat equip-ment owners — build a successful businessthat spans more than 40 years and has cov-ered six states. He and his family were earlybelievers in Bobcat machines, and Steve is agreat example of how a customer can beunstoppable with the right equipment and asolid relationship with his local dealer.”Klumker has used a variety of Bobcat skid
steer loaders, compact track loaders, com-pact excavators and attachments in countlessapplications, from a $300 million desertresort and golf club to a 36-year-long, five-phase housing development project. Hiswork has included building lagoons andswimming pools, backfilling utility trenchesand landscaping and tree planting acrossCalifornia, Nevada, Arizona, Colorado, Utahand New Mexico. For more than 40 years,the Klumkers have been customers ofBobcat of Durango, in Durango, Colo., andBingham Equipment in Arizona.
Additional Contest WinnersThe contest’s second prize went to Troy
Hieb, of Newcastle, Wyo., who will receive$1,000 in merchandise credit to spend at anyauthorized Bobcat dealer location. Hieb, a lieutenant with the Newcastle
Volunteer Fire Department, currently owns aBobcat T180 compact track loader, which— most notably — was used to help movedebris during a home fire.“The use of my Bobcat T180 allowed the
Newcastle Volunteer Fire Department tosafely, quickly and fully extinguish a fire thatcould have caused far more damage to thehome if not completely extinguished,” Hieb
wrote in his entry. “Bobcat has built a toolthat has made me unstoppable.”Fifteen third-place winners will receive
Bobcat jackets for telling their stories. Theyare:Robert H. Adair; Hadley, Mass.Jason Benedict; Pipe Creek, TexasEric Boyd; Power, Mont.Dave Chapin; Lincoln, Neb.Gonzalo Corvera; High Ridge, Mo.Gary Dominick; Corfu, N.Y.Josh Gaugler; Belgrade, Mont.Ryan Geiger; Columbia City, Ind.Dennis Del Grosso; Saranac, N.Y.James Kaufman; Anderson, S.C.John Kurtz; Scarborough, OntarioRandall Morgan; Hampton, Minn.Perry Lambright; Clearbrook, Minn.Rick Sherman; Montrose, Colo.Christy Webber; Chicago, Ill.The “Unstoppable” campaign started in
January, marking Bobcat Company’s year-long celebration of the production of its onemillionth loader. Contest entrants werejudged on individual completeness and cre-ativity.All winning contest entries, along with
weekly and monthly winners, can be viewedonline at bobcat.com/million.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Steve Klumker with his new special edition one-millionth Bobcat T650 compacttrack loader.
Steve Klumker (4th from L) with his family, after finding out that he was the winner of the Million Loaders Celebration contest.
The SaltDogg TGS02 tailgate spreader from BuyersProducts is practical for both residential and commercialapplication of ice melt and bagged salt.The 3-cu.-ft. (.08 cu m) capacity tailgate spreader features
a frame to fit into a 2-in. (5 cm), Class 4 hitch, which doesnot require truck bed rail drilling. It is ideal for use on 1/2- to1-ton trucks and SUVs.The new SaltDogg TGS02 tailgate spreader features a hor-
izontal-auger feeder design that gives contractors the flexi-bility to easily spread ice melt and bagged salt. An optionalvibrator can be added for mixing salt and sand.“Weighing just 64 pounds, this SaltDogg tailgate spreader
has received great reviews as being the perfect size to get thejob done,” said Dave Zelis, director of sales and marketing atBuyers Products. “It has a 1/3 horsepower, 12-volt DC dual-shaft gear motor and offers spread widths from 3 feet to 20feet that are practical for both residential and commercialuse.”SaltDogg offers a complete product line of 12 tailgate
spreaders. Each spreader is constructed from polyethylene,steel and stainless steel for top performance, durability andlonger product life, according to the manufacturer.For more information, visit saltDogg.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
SaltDogg TGS02 Provides Easy Distribution of Ice Melt, Salt
Meyer Products’ ground tracking tech-nology (GTT) allows the plow to pivotup to 12 degrees in either direction toautomatically follow the contour of theroad. Ground tracking technology clearssurfaces faster and better than plows thatdon’t adjust to a surface’s contours,according to Meyer. Available as an option on Meyer Lot
Pro, Road Pro and Diamond Edge plows,GTT is possible because the moldboardand black iron move around a centerpivot point.In addition, GTT levels the moldboard
automatically when it’s raised and movedright or left, so the plow remains level
during transport. It also allows the plowto mount more easily on uneven surfacesbecause the mount stays level even if themoldboard is not.For more information, visit www.mey-
erproducts.com. (This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Meyer Products Presents New Ground Tracking Technology
Pages 55-63
Snow and Ice SectionFor more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.
The 3-cu.-ft. (.08 cu m) capacity tailgate spreader features a frame to fit into a 2-in. (5 cm), Class 4hitch, which does not require truck bed rail drilling.
Ground tracking technology allowsthe plow to pivot up to 12 degrees ineither direction to automatically fol-
low the contour of the road.
Page 56 • October 25, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
Amanda Geiger bought these sunglasses
to wear on spring break. She wore them only once
before she was killed by a drunk driver.
Friends Don’t Let Friends Drive Drunk.
Pho
to b
y M
icha
el M
azze
o
CEAttachments Offers 10-Foot Edge Oscillating Snow PushCEAttachments Inc., a global supplier of attachments
and accessories for compact equipment, has added a new10-ft. Edge oscillating snow push model to the lineup ofsnow removal attachments for any brand or model skidsteer or track loader.The Edge 10-Foot oscillating snow push is the largest
size available, with a capacity of 226 cu. ft. (6.4 cu m). This versatile attachment also can be used year-round in
any climate for moving other materials such as floodcleanup wastewater, manure and more.This model pusher features a heavy-duty frame that
oscillates up to 8 degrees along uneven surfaces, keepingthe edges in contact with the surface being cleared.Floating side plates and frame links allow the pusher
weight to be transferred onto the edge for maximum clear-ing. The 1.5 by 10 in. (3.8 by 25.4 cm) reversible, replace-able rubber edge offers 3 in. (7.6 cm) of wear on each side,providing long-lasting clearing throughout the season.An optional pull-back kit allows for down pressure on
the rubber edge to draw snow or other materials awayfrom confined spaces such as loading docks or buildings.Edge oscillating snow pushes are available in widths of
7-, 8-, 9-, and now the 10-ft. (2.1, 2.4, 2.7 and 3m), withoptional pull back kits that include a rubber cutting edge ineach size.For more information, call 866/232-8224 or visit
www.ceattachments.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.) The Edge 10-Foot oscillating snow push is the largest size available, with a capacity of 226 cu. ft. (6.4 cu m).
Boss Adds 4-Ft. ATV PlowWith Fully Hydraulic System Boss Snowplow builds upon its ATV plow offerings with the addition of a 4 ft. (1.2m) ATV plow with the same features and capabilities found on full-size Bossplows. A fully hydraulic system means no winches, pulleys or handles for lifting orangling and higher snow stacking. The plow features a quick-attach system so it
goes on and comes off with ease. When theplow is not attached, a low-profileundercarriage design keeps the ATVtrail compatible.
For more information,call 800/286-4155or visit www.boss-plow.com.
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 25, 2014 • Page 57
Page 58 • October 25, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
r ce oued snn ap iotS
e Ereen Dhof Jne oie ltplemor c
K40d 2ns, areetd Siks SeireSe E
t capmoJ C44d 2n, aK40, 3K
nod sns, amoorle bgnaetcurtsbnoy ullautrivs smeoh cca. EsredaoL
r ce oued snn ap iotS
od blns, aedas, blrhesuw pno. Aedisnhe im tory ftilibisid ved cetat heeiuh qtid wradnats s
e Ereen Dhof Jne oie ltplemor c
e a wdivore p, wllf at ose. Bsrewh outid weppiuqe en bal cld an. Ahe oun tr oetnip weet kahs tbad c
K40d 2ns, areetd Siks SeireS-e E
o s tecrousef rh otlaee a ws, tekcu™ bore Ptiskror Wh ou
g nireville deihe wdisthe out capmoJ C44d 2n, aK40, 3K
www.erbequipment.com
Fenton, MO 63026636/349-0200
Cape Girardeau, MO 63703573/334-0563
Foristell, MO 63348636/673-2131
Cuba, MO 65453573/885-0500
Mt. Vernon, IL 62864618/244-6800Paducah, KY270/554-1131Owensboro, KY270/684-2339Evansville, IN812/473-0484
8331 Meade Springer Rd.Ashland, KY 41102606/928-3477195 Sykes Blvd.
Pikeville, KY 41502606/432-0321
105 Tennis Center Dr.Marrietta, OH 45750
740/373-5255P.O. Box 629
Cowen, WV 26206304/226-3299
Fax:�304/226-3067
PO Box 1220Beaver, WV 25831304/255-1525PO Box 1547
Elkins, WV 26241304/636-6421
19 Goff CrossingCross Lane, WV 25313
304/204-1818
www.westsidetractorsales.com
1400 W. Ogden AveNaperville, IL 60563
630/355-7150Fax: 630/355-7173South Holland, IL708/331-6362Rockdale, IL815/730-9011Wauconda, IL847/526-7700Rockford, IL815/961-3160South Bend, IN574/232-1461Lafayette, IN765/447-6933
Sioux City, IA 800/352-4693Waterloo, IA 800/772-2019Dodge City, KS800/794-0172Great Bend, KS800/264-4056Topeka, KS800/279-6087���Ulysses, KS800/472-9238Park City, KS800/262-0139Kansas City, MO888/306-3434Springfield, MO
888/306-2656Gering, NE800/205-6784
Grand Island, NE800/868-4017Lincoln, NE800/416-5518North Platte, NE800/894-7060Omaha, NE800/416-5095Brunswick, OH800/716-9796Canton, OH866/235-0438��Chillicothe, OH740/633-5300Cincinnati, OH
800/844-3734Columbus, OH800/222-2010Lima, OH
800/423-7445Poland, OH866/503-7259Vandalia, OH800/233-4228Cambridge, OH740/439-2747Painesville, OH440/639-0700
Cranberry Twp, PA724/776-3636Delmont, PA724/837-4500
www.murphytractor.comwww.lec1.com
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 25, 2014 • Page 59
TOPPERS PLUS1929 East Madison Ave.
Mankato, MN 56001507-387-7376
800-321-7587
www.toppersplus.com
TRUCK UTILITIES2370 English St.,
St. Paul, MN 55109651-484-3305
800-869-1075
2770 5th Ave S., Fargo, ND 58103
701-241-9411
800-972-9250
www.truckutilities.com
NORTH CENTRAL TRUCK &EQUIPMENT
2629 Clearwater RoadSt. Cloud, MN 56301
732 30th Avenue SEMinneapolis, MN 55414
877-485-9595
www.northcentralinc.com
K & R TRUCK SALES840 Interchange Dr.Holland, MI 49423
616-392-8377
616-796-3113
Fax: 616-392-6755
www.kandrtrucksales.com
TRUCKIN’ AMERICA4720 Hwy. 52 N.
Rochester, MN 55901800-556-4720
507-285-9855
www.truckinamerica.com
Page 60 • October 25, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 25, 2014 • Page 61
ILLINOIS
Bonnell Industries Inc, Dixon 815-284-3819
Paris Machine, Paris 217-465-3360
WJN Enterprises Inc, Tinley Park 815-464-4800
Nite Equipment Inc, Pecatonica 815-239-9096
Bus Andrews Equipment, Spring�eld 417-869-1541
R.A. Adams Enterprises Inc, McHenry, 815-385-2600
INDIANA
Hayward, Wholesale Distributor 800-282-1585
McGavic Outdoor Power Equipment, Kokomo 765-457-7182
Plain�eld Equipment, Plain�eld 317-839-2448
Pyramid Equipment Inc, Rolling Prairie 219-778-2591
Tri State Line-X & Accessories, Angola 260-665-5959
McGavic Outdoor Power Equipment, Marion 765-651-9811
IOWA
Stellar Truck & Trailer, Mason City 855-423-7107
Hiway Truck Equipment, Fort Dodge 515 576-2299
School Bus Sales Co, Waterloo 319-296-1363
KANSAS
Central States Thermo-King, Kansas City 913-371-0868
Mynatt Truck Equipment, Olathe 913-829-6787
JCentral States Thermo King Inc, Wichita 316-744-2061
KENTUCKY
Hayward, Wholesale Distributor 800-282-1585
Manning Equipment, Louisville 502-426-5210
Tebco Of Kentucky Inc, Richmond 859-624-0653
MICHIGAN
Hayward, Wholesale Distributor 800-282-1585
Automotive Service Co., Jackson 517-784-6131
Owosso Hitch & Plow Center Inc, Owosso 989-725-9977
Professional Parts Warehouse, Muskegon 231-777-2001
MINNESOTA
Northwoods Hydraulic & Equipment Inc, Moose Lake 218-485-4850
Leroys Custom Truck, Ham Lake 763-757-5326
MISSOURI
Kranz Automotive Body Co., St Louis 314-776-3787
Kranz Of Kansas City, Kansas City 816-231-9995
Riechers’ Truck Body & Equipment Co., Washington 636-239-3700
NEBRASKA
Rod’s Power Sports, Roca 402-423-6230
OHIO
Hayward, Wholesale Distributor 800-282-1585
Ace Truck Equipment Co, Zanesville 740-453-0551
Ace Truck Body Inc, Grove City 614-871-3100
Cenweld Corp. - Truck Bodies & Equipment, Cuyahoga Falls 330-923-9717
Chuck’s Custom Truck & Trailer, Medina 330-723-6029
Coia Implement Sales, Ravenna 330-296-5280
Cross Truck Equipment, Canton 330-477-8151
JTI Inc, Oakwood Village 440-232-4311
Kalida Truck Equipment Inc, Kalida 419-532-3919
Myers Equipment Corp., Can�eld 330-533-5556
Pengwyn, Columbus 614-488-2861
Principal Truck Supply, Columbus 614-272-6644
ME Y ER PRODUCT S AVA IL A BLE AT:
OHIO (CONTINUED)
River City Body Co., Cincinnati 513-772-9317
Southeastern Equipment Co., Cambridge 740-432-6303
Wellington Implement, Wellington 440-647-3725
Buckeye Body & Equipment, Columbus 614-299-1136
The Gledhill Road Machinery Co., Galion 419-468-4400
Kalida Truck Equipment Inc, Walbridge 419-666-3700
Zoresco Equipment, Oakwood Village 440-359-1010
Zoresco Equipment Co., Monroe 513 360-2929
SOUTH DAKOTA
Time Equipment Rental & Sales, Rapid City 605-348-2368
WISCONSIN
Wisconsin Body & Hoist, Chippewa Falls 715-723-3223
Page 62 • October 25, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
ILLINOIS
Bonnell Industries Inc, Dixon 815-284-3819
Paris Machine, Paris 217-465-3360
WJN Enterprises Inc, Tinley Park 815-464-4800
Nite Equipment Inc, Pecatonica 815-239-9096
Bus Andrews Equipment, Spring�eld 417-869-1541
R.A. Adams Enterprises Inc, McHenry, 815-385-2600
INDIANA
Hayward, Wholesale Distributor 800-282-1585
McGavic Outdoor Power Equipment, Kokomo 765-457-7182
Plain�eld Equipment, Plain�eld 317-839-2448
Pyramid Equipment Inc, Rolling Prairie 219-778-2591
Tri State Line-X & Accessories, Angola 260-665-5959
McGavic Outdoor Power Equipment, Marion 765-651-9811
IOWA
Stellar Truck & Trailer, Mason City 855-423-7107
Hiway Truck Equipment, Fort Dodge 515 576-2299
School Bus Sales Co, Waterloo 319-296-1363
KANSAS
Central States Thermo-King, Kansas City 913-371-0868
Mynatt Truck Equipment, Olathe 913-829-6787
JCentral States Thermo King Inc, Wichita 316-744-2061
KENTUCKY
Hayward, Wholesale Distributor 800-282-1585
Manning Equipment, Louisville 502-426-5210
Tebco Of Kentucky Inc, Richmond 859-624-0653
MICHIGAN
Hayward, Wholesale Distributor 800-282-1585
Automotive Service Co., Jackson 517-784-6131
Owosso Hitch & Plow Center Inc, Owosso 989-725-9977
Professional Parts Warehouse, Muskegon 231-777-2001
MINNESOTA
Northwoods Hydraulic & Equipment Inc, Moose Lake 218-485-4850
Leroys Custom Truck, Ham Lake 763-757-5326
MISSOURI
Kranz Automotive Body Co., St Louis 314-776-3787
Kranz Of Kansas City, Kansas City 816-231-9995
Riechers’ Truck Body & Equipment Co., Washington 636-239-3700
NEBRASKA
Rod’s Power Sports, Roca 402-423-6230
OHIO
Hayward, Wholesale Distributor 800-282-1585
Ace Truck Equipment Co, Zanesville 740-453-0551
Ace Truck Body Inc, Grove City 614-871-3100
Cenweld Corp. - Truck Bodies & Equipment, Cuyahoga Falls 330-923-9717
Chuck’s Custom Truck & Trailer, Medina 330-723-6029
Coia Implement Sales, Ravenna 330-296-5280
Cross Truck Equipment, Canton 330-477-8151
JTI Inc, Oakwood Village 440-232-4311
Kalida Truck Equipment Inc, Kalida 419-532-3919
Myers Equipment Corp., Can�eld 330-533-5556
Pengwyn, Columbus 614-488-2861
Principal Truck Supply, Columbus 614-272-6644
ME Y ER PRODUCT S AVA IL A BLE AT:
OHIO (CONTINUED)
River City Body Co., Cincinnati 513-772-9317
Southeastern Equipment Co., Cambridge 740-432-6303
Wellington Implement, Wellington 440-647-3725
Buckeye Body & Equipment, Columbus 614-299-1136
The Gledhill Road Machinery Co., Galion 419-468-4400
Kalida Truck Equipment Inc, Walbridge 419-666-3700
Zoresco Equipment, Oakwood Village 440-359-1010
Zoresco Equipment Co., Monroe 513 360-2929
SOUTH DAKOTA
Time Equipment Rental & Sales, Rapid City 605-348-2368
WISCONSIN
Wisconsin Body & Hoist, Chippewa Falls 715-723-3223
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 25, 2014 • Page 63
Large in stock inventoryBackhoe & loader solids also available
Soft Ride Solid Skid Steer TiresExtra deep lugs for tractionTough rubber compounding
www.advancetires.com • (800) 445-6647M e n t i o n t h i s a d f o r d i s c o u n t e d s h i p p i n g
TRIPLETHREAT.
NOTHING’S TOUGHER, SMARTER OR FASTER than THE BOSS XT line of plows, including the NEW Poly Power-V XT. A rock-solid combination of professional-grade toughness, Power-V versatility and super-slick poly effi ciency, the newest XT is unlike any plow in the industry. But that’s no surprise coming from THE BOSS. We’ve been driving the industry forward for 24 years with products that make your job faster and easier. Simple as 1-2-3.
THE BOSS XT PLOWS:• NEW Poly Power-V XT… 8'2" 9'2"• Steel Power-V XT……… 8'2" 9'2"• Super-Duty XT…………. 8'0" 8'6" 9'0"
Taller blade and enhanced curl• 37" tall fl ared blade wings on Power-V models• High-performance cutting edge•
• SmartHitch® 2 • SmartLight™ 2 • SmartTouch® 2 • SmartShield®
b o s s p l o w . c o m
( D E A L E R I M P R I N T )
STOP IN TODAY!
©2009 BOSS Products/Northern Star Industries, Inc.
•
• SmartLight™
b
Steel Power-V X Super-Duty X 8'6" 9'0"
T
• SmartShield®
©2009 BOSS Products/Northern Star Industries, Inc.
•
SmartShield®
b
CRYSTEEL TRUCK EQUIPMENT52248 Ember Rd.
Lake Crystal, MN 56055507-726-6041 800-722-0588
Fax: 507-726-2984
1130 73rd Ave. N.E.Fridley, MN 55432763-571-1902 800-795-1280
www.crysteeltruck.com
CANNON TRUCK EQUIPMENT
51761 Danview Technology CourtShelby Twp., MI 48315
586-991-0054Fax: 586-991-0074
www.cannonequip.com
Boss Snowplow Adds AdjustableHitch Fork Box Plows to Line
The Boss box plow family just got bigger. Boss Snowplow adds 14 and 16 ft. (4.3 and4.8 m) box plows with a new adjustable hitch fork system that easily attaches toany size tractor loader bucket. The new larger sized plows feature self-adjustingwings and a segmented trip-edge design for maximum plow efficiency, perform-ance and ease of use. Heavy-duty wing shoes provide wear resistance for long-termdurability. A 49 in. (124 cm) moldboard offers maximum snow holding and push-ing performance.
For more information, call 800/286-4155 or visit www.bossplow.com.
Page 64 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Sievers JCB406 Old Rt 66Hamel, IL 62046618-633-2622
8080 State Rt 16Hillsboro, IL 62049217-532-3222
State Rd 267 SouthGreenfield, IL 62044217-368-2486
14464 Shad RdCarlinville, IL 62626217-854-3191
1351 W Jackson StAuburn, IL 62615217-438-6111www.sieversjcb.com
Rueter’s1132 31st AveCouncil Bluffs, IA 51401712-366-5221
2425 NE 126th AveElkhart, IA 50073515-367-3054
5815 Lincoln WayAmes, IA 50014515-268-0939
Hwy 30 WestGrand Junction, IA 50107515-738-2571
23296 Hwy 30 EastCarroll, IA 51401712-792-9294
E Highway 275Neligh, NE 68756402-887-5638 www.ruetersjcb.com
Sellers JCB1645 S. West St.Wichita, KS 67213316-943-9311Fax: 316-943-8116
15325 S. Keeler St.Olathe, KS 66062913-764-2011
3030 S. W. 57th St.Topeka, KS 66609785-862-0031
400 N. ChicagoSalina, KS 67401785-823-6378
395 N. IndustrialGarden City, KS 67846620-275-9621www.sellersequipment.com
JCB of Chicago1603 E Algonquin RdArlington Heights, IL 60005847-437-8686
16754 New AveLemont, IL 60439630-257-1261
1548 Huntwood DrCherry Valley, IL 61016815-332-8222www.jcbchicago.com
AIS ConstructionEquipment Corp.3600 North Grand River Ave.Lansing, MI 48906517-321-8000Fax : 517-321-6275
600 44th Street S.W.Grand Rapids, MI 49548616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050586-727-7502Fax: 586-727-7311
4600 AIS DriveP.O. Box 253Bridgeport, MI 48722989-777-0090Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165248-437-8121Fax: 248-437-9750www.aisequip.com
Fairchild JCB15735 Central Avenue NEHam Lake, MN 55304763-434-3832
3100 Highway 13 WestBurnsville, MN 55337952-697-1720
2140 Hutson RoadGreen Bay, WI 54303920-494-8726
2815 Mary StreetMarinette, WI 54143715-735-0402
5217 Heffron CourtStevens Point, WI 54481715-341-6846www.fairchildjcb.com
A high school student from Pennsylvania and an under-graduate student from Florida Polytechnic Institute werenamed winners of the American Road & TransportationBuilders Association’s (ARTBA) 4th annual “StudentTransportation Video Contest.” They will each receive a$500 cash prize. The association received more than 30 entries this year in
two categories. Sponsored by ARTBA’s Research andEducation Division (RED), the contest aims to raise aware-ness about infrastructure issues by challenging students todevelop a brief video exploring various topics relating toAmerica’s transportation network. Students were able tochoose their own subject matter, with most focusing on howtransportation infrastructure is built and paid for, the impactsof traffic congestion, transportation and urban developmentplans, and the public’s perception of transportation develop-ment. �Submissions were reviewed by a panel of ARTBA mem-
bers and the winning entries were screened during the asso-ciation’s 2014 National Convention, held Sept. 7 to 9 inCalifornia.
Category One — Elementary, Middle or High School Students: “Infrastructure:
the Unsung Hero” Ty Miller, Boyertown Area Senior High School
Miller, a 12th grade student at Boyertown Area SeniorHigh School in central Pennsylvania, created a thoughtfulvideo to underscore that transportation infrastructure is the
catalyst of American civilization. It discusses how the con-struction of bridges, canals, waterways, railways, airportsand roads are the “unsung heroes” of our society, spurringeconomic development, providing freedom of mobility anduniting the country. Second Place was awarded to: “The Million Mile
Problem” by Hill Chang of High Technology High School inLincroft, N.J.
Category Two — Post-Secondary, College orGraduate Students: “Our Deficient
Transportation Infrastructure” AuburyErickson, Florida Polytechnic University
Erickson, a freshman studying mechanical and industrialengineering in Lakeland, Fla., created an informative, four-minute animation outlining the importance the U.S. trans-portation system to the U.S. economy. As narrator, sheexplains how America’s transportation infrastructure hasbeen given a “D” rating by the American Society for CivilEngineers. She highlights the nation’s transportation fund-ing challenges, lack of investment and the importance ofmaintaining a well-developed and sufficient transportationnetwork.Second Place was awarded to: “The Cars of the Future-
Engineering” by David Baril, an animation major at theSouthwest University of Visual Arts in Glendale, Ariz.
(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Students Take Top Honors in Contest
Nortrax announced the appointment of CurtNeth to director of human resources of Nortrax,North America. In this new capacity, Neth willlead the Nortrax human resource strategy,processes and support for the Nortrax enter-prise.Neth joined Nortrax in March of 2005 as a
regional human resource manager of Ohio andTennessee. Neth, a native of Ohio, has lived inTampa for the past five years as the NortraxU.S. human resource director. President and CEO Tim J. Murphy said, “A
great deal of the interactions with our employ-ees as it relates to payroll, wellness, safety,careers and teamwork are consistent on bothsides of the border. Aligning under one humanresource managed system and leveragingknowledge and expertise of our humanresource team into one team will allow us toprovide better support for our employees.”For more information, visit
www.nortrax.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Nortrax Promotes Neth to Director ofHuman Resources, North America
Nortrax announced the appointment of Curt Neth to director ofhuman resources of Nortrax, North America.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 65
JCB of St. Louis7978 Veterans Pkwy.St. Peters, MO 63376636-281-4450
CSTK JCB400 Shawnee AvenueKansas City, KS 66105913-371-0868www.cstkjcb.com
Black JCB1187 Burch Dr., Evansville, IN 47725888-840-9737
5119 Charter Oak Dr., Paducah, KY 42001270-443-8889
2685 Pembroke Road, Hopkinsville, KY 42240270-886-3432www.blackequipment.com
Diesel Machinery Inc.4301 N Cliff Ave, Sioux Falls, SD 57104888-753-8907
39288 133rd St, Aberdeen, SD 57401888-484-6312
3801 N Deadwood AveRapid City, SD 57702800-658-3047www.dieselmachinery.com
MH JCB106 Circle Freeway Dr, Cincinnati, OH 45246513-681-2200
3306 Gilmore Industrial Blvd, Louisville, KY 40213502-962-6560
5859 Raymond St, Indianapolis, IN 46241317-240-6300www.mhjcb.com
YES JCB11715 W Silver Spring RoadMilwaukee, WI 53225262-783-7510
7001 Manufacturers DriveMadison, WI 53704608-243-9253www.buyjcb.com
Page 66 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.
EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.
ERIEPEX
I DEH TECNE
ECNREFFE
ERIEPEXhs tre�i ohcuekaT
e amo. Ctenale phte dlaoc lrou ysitiV
I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn
.yado tlerae
ECNREFFEt ecapmof ce ond liecnavd
. tuobg aniklas te i eirpexE
nt onempiuqt e —hiuceka T Taenc
F
S KREHTT OAHT WUD ONIF
T ISI. VWONS K HUCEKAT
OMC.SU-I E DHD TNIO F T
.UOT YSERAER NELAEE D
McCann Industries543 S. Rohlwing Rd • Addison, IL 60101
630-627-0000250 E. North Frontage Rd. • Bolingbrook, IL 60440
630-739-77702350 S. Laflin St. • Chicago, IL 60608
312-942-92004701 West 137th Street • Crestwood, IL 60445
708-597-31101133 Indianapolis Blvd. • Schererville, IN 46375
219-865-65451360 N. Rand Rd. • Wauconda, IL 60084
847-526-94444102 W. Crystal Lake Rd. • McHenry, IL 60050
815-385-0420www.McCannOnline.com
Road Machinery & Supplies Co.5633 W. Highway 13 • Savage, MN 55378
952-895-9595 • 800-888-9515314 Garfield Ave. • Duluth, MN 55802
218-727-8611 • 800-888-9535315 North Hoover Rd. • Virginia, MN 55792
218-741-9011 • 800-752-430475 US Hwy 41 • Neguanee, MI 49866
906-475-6488606 W. 10th Ave. • Milan, IL 61264309-787-1742 • 800-633-9114
RMS Rentals12520 Quenton Ave. So., Ste 100
Savage, MN 55378952-895-9595 • 800-888-9515
www.rmsequipment.com
Kelbe Brothers Equipment Co., Inc.12770 W. Silver Spring Drive • Butler, WI 53007
262-373-2151Fax: 262-373-2102
4621 Dutch Mill Rd. • Madison, WI 53716608-221-8300
Fax: 608-221-06103101 French Rd. • De Pere, WI 54115
920-343-6496Fax: 262-781-9671www.kelbebros.com
Brandeis Machinery & SupplyCompany
17000 Highway 41 NEvansville, IN 47725
812-425-44917310 Venture Lane
Fort Wayne, IN 46818260-489-4551
8410 Zionsville RoadIndianapolis, IN 46268-1524
317-872-84101801 Watterson TrailLouisville, KY 40299
502-491-4000www.brandeismachinery.com
Star Equipment Ltd.1401 2nd Avenue • Des Moines, IA 50314
515-283-2215 • 800-369-2215Fax 515-283-0295
2625 W. Airline Hwy. • Waterloo, IA 50703319-236-6830 • 800-791-9249
Fax 319-236-68342950 6th Street SW • Cedar Rapids, IA 52404
319-365-5139 • 800-728-5139Fax 319-365-6726
2100 E. Lincoln Way • Ames, IA 50010515-233-9500 • 866-856-2312
Fax: 515-233-9505www.starequip.com
Central Illinois Ag., Inc.792 U. S. Hwy 150 EastFarmer City, IL 61842
309-928-2154200 Sharon St.
Atlanta, IL 61723217-648-2307Rt. 10 East
Clinton, IL 61727217-935-8373
130 S. Tonica St.Mason City, IL 62664
217-482-9760www.centralilag.com
Victor L. Phillips Co.4100 Gardner Ave. • Kansas City, MO 64120
800-878-92905430 S. Highway 43 • Joplin, MO 64804
800-878-82236330 W. Hwy 60 • Brookline Station, MO 65619
800-955-27293250 North Hydraulic • Wichita, KS 67219
800-878-33461304 SW 42 St. • Topeka, KS 66609
800-878-43452203 West Jones Ave. • Garden City, KS 67846
800-511-1435www.vlpco.com
Alta Equipment Company28775 Beck Rd. • Wixom, MI 48393
248-449-67002470 W. Columbia Ave. • Battle Creek, MI 49015
269-965-12698840 Byron Commerce SW • Byron Center, MI 49315
616-878-74504716 Talon Ct. S.E. • Kentwood, MI 49512
616-698-29606327 Jomar Ct. • Lansing, MI 48917
517-272-50335920 Grand Haven Rd. • Muskegon, MI 49441
231-798-875456195 Pontiac Trail • New Hudson, MI 48165
248-356-520028855 Smith Rd. • Romulus, MI 48174
734-641-82381524 Champagne Dr. • Saginaw, MI 48604
989-752-94007500 E. 15 Mile Rd. • Sterling Hts., MI 48312
586-977-6000476 US 31 South • Traverse, MI 49685
231-943-37009433 Riley St. • Zeeland, MI 49464
616-748-4108www.altaequipment.com
Road Builders Machinery andSupply Co., Inc.
4115 S. 90th St. • Omaha, NE 68127402-331-9200
Fax: 402-339-66205601 Fletcher Ave. • Lincoln, NE 68507
402-325-0447Fax: 402-325-0753
4949 Juergen Rd. • Grand Island, NE 68801308-384-2620
Fax: 308-384-0686www.roadbuildersmachinery.com
Columbus Equipment Company50 East Kingston Ave. • Columbus, OH 43207
614-443-654112500 Williams Rd. • Perrysburg, OH 43551
419-872-7101712 Shepherd Ave. • Cincinnati, OH 45215
513-771-39223942 Brecksville Rd. • Richfield, OH 44286
330-659-6681290 Old Steubenville Pike • Cadiz, OH 43907
740-942-88717570 New Carlisle Pike • Dayton, OH 45424
937-879-31541601 Shepler-Church Ave. SW • Canton, OH 44706
330-453-4521818 Lee St. • Zanesville, OH 43701
740-455-4036864 Richmond Rd. • Painesville, OH 44077
440-352-04523668 US Route 23 South • Piketon, OH 45661
740-289-3757www.columbusequipment.com
Midwest Underground Supply1106 32nd St. SW
Bondurant, IA 50035877-967-5656
27285 Ironworks Rd.Harrisburg, SD 57032
605-368-9880www.midwestundergroundsupply.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 67
FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.
EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.
ERIEPEX
I DEH TECNE
ECNREFFE
ERIEPEXhs tre�i ohcuekaT
e amo. Ctenale phte dlaoc lrou ysitiV
I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn
.yado tlerae
ECNREFFEt ecapmof ce ond liecnavd
. tuobg aniklas te i eirpexE
nt onempiuqt e —hiuceka T Taenc
F
S KREHTT OAHT WUD ONIF
T ISI. VWONS K HUCEKAT
OMC.SU-I E DHD TNIO F T
.UOT YSERAER NELAEE D
Bobcat of St. Louis401 West Outer Rd.
Valley Park, MO 63088636-225-2900
Fax: 636-225-43441885 West Terra Lane • O’Fallon, MO
636-240-90201101 N. Lenway Dr. • Columbia, MO
573-886-94359801 West State Route 161
Fairview Heights, IL618-397-1847
www.bobcatofstl.com
Luby Equipment Services2300 Cassens Drive • Fenton, MO 63026
636-343-9970199 Airport Road • Cape Girardeau, MO 63702
573-334-99378853 Petroff Drive • Caseyville, IL 62232
618-397-99714375 Camp Butler RoadSpringfield, IL 62707
217-744-22332625 North 24th St. • Quincy, IL 62305
217-222-5454www.lubyequipment.com
Wilson Equipment Company2180 Old Frankfort Pike • Lexington, KY 40510
859-254-6443800-432-0913
Fax: 859-254-9099
828 W. Cumberland Gap Pkwy • Corbin, KY 40701606-528-0700800-274-9457
Fax: 606-528-2329
2124 Watergap Road • Prestonsburg, KY 41653606-874-8036 • 800-955-9457
Fax: 606-874-0013
www.wilsonequipment.com
Page 68 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
hitachiconstruction.com
At Hitachi, we don’t copycat out-of-date, lackluster excavator technology.
By focusing on excavators, we’re able to engineer and build them 100% for
excavating. More advanced. More reliable. More productive. THAT’S ALL.
N O T I M I T A T I O N .
WEST SIDE TRACTOR SALES CO.
www.westsidetractorsales.com
1400 W. Ogden Ave.Napervile, IL 60563
630-355-7150Fax: 630-355-7173
310 W. 162nd St.South Holland, IL 60473
708-331-6362Fax: 708-331-7334
3110 Prairie Rd.Rockford, IL 61102
815-961-3160Fax: 815-965-1810
1560 N. Old Rand Rd.Wauconda, IL 60084
847-526-7700Fax: 847-526-3565
600 Walnut CourtRockdale, IL 60436815-730-9011
Fax: 815-730-9036
AIS CONSTRUCTION EQUIPMENT
CORPORATIONwww.aisequip.com
3600 North Grand RiverAvenue
Lansing, MI 48906517-321-8000
Fax: 517-321-6275
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot Avenue
Lenox, MI 48050586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit 56555 Pontiac Trail
New Hudson, MI 48165248-437-8121800-457-8121
RDO EQUIPMENT CO.www.rdoequipment.com
12500 DuPont Ave. S.Burnsville, MN952-890-8880
1910 LorRay Dr.North Mankato. MN
506-387-1836
1236 60th Ave. N.W.Rochester, MN507-282-8888
6700 Highway 10 NWSauk Rapids, MN320-259-6222
NORTRAXwww.nortrax.com
310 Industrial Park DriveAshland, WI 54806
715-682-5522Fax: 715-682-8476
4341 South PrairieView Rd.(Hwy 53 North)
Chippewa Falls, WI 54729715-834-2924
Fax: 715-834-1173
1890 US Hwy 8Monico, WI 54501
715-487-5583Fax: 715-487-5968
1425 O’Keefe DriveMosinee, WI 54455
715-693-3820Fax: 715-693-3825
259 Convenience LaneSouthwest
Bemidji, MN 56601215-759-1996
Fax: 218-759-1790
3401 Arrowhead Rd.Duluth, MN 55811
218-722-7456Fax: 218-722-2619
34316 Hwy 2Grand Rapids, MN 55744
218-326-9427Fax: 218-327-1248
1818 North Lincoln Rd.Escanaba, MI 49829
906-789-9054Fax: 906-789-0344
BROOKS TRACTORwww.brookstractor.com
Sun Prairie1900 W. Main St.
P.O. Box 9Sun Prairie, WI 53590
608-837-5141
Milwaukee12101 W. Silver Spring Dr.Milwaukee, WI 53225
414-462-9790
De Pere1031 Lawrence Dr.De Pere, WI 54115920-336-5711
West Salem451 W. Avenue N.
West Salem, WI 54669608-786-2644
Plover5429 Prairie Dr.Plover, WI 54467715-254-2777
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 69
We’ve got you covered
Scan for Free Demo
jobsite tough
LOGAN CONTRACTORS SUPPLY, INC.
www.logancontractors.comDes Moines
4101 106th Street • Des Moines, Iowa 50322515-253-9048 • Fax: 515-253-9491
Quad Cities4114 State Street • Bettendorf, Iowa 52772
563-441-2949 • Fax: 563-441-2953Kansas City
1325 S. Enterprise Drive • Olathe, Kansas 66061913-768-1551 • Fax: 913-768-1171
Omaha6544 L Street • Omaha, Nebraska 68117
402-339-3900 • Fax: 402-597-0694
BURRIS EQUIPMENT2216 N. Greenbay Rd. • Waukegan, IL 60087
847-336-1205 • Fax: 847-336-2697www.burrisequipment.com
Ingleside, IL815-363-4100
Joliet, IL815-464-6650
BIRKEY’S CONSTRUCTION EQUIPMENTwww.birkeys.com
2202 S. High Cross Road • Urbana, IL 61803800-798-1772 • Fax: 217-337-1775
1055 Interstate Drive • Bloomington, IL 61705800-374-0483
664 US Hwy 150E • Galesburg, IL 61402866-344-2475
208 DeWitt Ave East • Mattoon, IL 61938217-235-3158
FRANKLIN EQUIPMENT, LLCwww.franklinequipmentllc.com
Columbus Superstore4141 Hamilton Square Boulevard
Groveport, OH 43125614-228-2014 • 800-282-1438
Dublin7570 Fishel Drive South • Dublin, OH 43016
614-389-2161
Newcomerstown6206 US Highway 36 SW
Newcomerstown, OH 43832740-492-0455
INDY EQUIPMENTwww.indyequipment.com
6500 Schaaf Rd. • Independence, OH 44131216-446-3200 • Fax: 216-573-7712
11159 Royalton Rd. • North Royalton, OH 44133440-237-9040
35350 Chester Rd. • Avon, OH 44011440-832-7133
Page 70 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Link-Belt® Spin Ace®
come to expect from us - along with a minimum swing radius design for better maneuverability at sites where work space is at a premium. Thoughtful redesign of counterweights and boom placement makes them ideal for residential construction, utility work and specialty trenching jobs.
Roomy, redesigned cab
Convenient ground-level
Extended service intervals
3-year subscription to RemoteCARE™ telematics
Your Link-Belt Excavator dealer has the right Spin Ace for your application, along with uncompromising service and support to keep them performing at their best.
*75 X3 and 80 X3 engines are Final Tier 4
Model # Operating Wt. Net hp @ rpm Tail Swing75 X3 Spin Ace 17,400 lbs. 54 hp @ 2,000 rpm80 X3 Spin Ace 54 hp @ 2,000 rpm145 X3 Spin Ace 33,200 lbs. 100 hp @ 2,000 rpm235 X3 Spin Ace
KELBE BROTHERS EQUIPMENT CO.12770 W. Silver Spring Drive
Butler, WI 53007262-781-4970 • Fax: 262-781-9671
www.kelbebros.com
4621 Dutch Mill Rd.Madison, WI 53716
608-221-8300
3101 French Rd.De Pere, WI 54115
920-343-6496
CONSTRUCTION MACHINERY COMPANYwww.cmcky.com
2911 S. English Station Rd.Louisville, KY 40299
502-267-4020 • 866-901-2262 • Fax: 502-261-9251
2235 Ragu DriveOwensboro, KY 42303
270-683-2000 • 877-683-2262 • Fax: 270-683-3727
267 W. Jay Louden Rd.Carrollton, KY 41008
502-732-4661
HAYDEN-MURPHY EQUIPMENT COMPANY
www.hayden-murphy.com9301 E. Bloomington FreewayMinneapolis, MN 55420-3410
952-884-2301 • 800-352-2757 • Fax: 952-884-2293
www.wilsonequipment.com
2180 Old Frankfort PikeLexington, KY 40510
859-254-6443 • 800-432-0913 • Fax: 859-254-9099
828 W. Cumberland Gap Pkwy.Corbin, KY 40701
606-528-0700 • 800-274-9457 • Fax: 606-528-2329
2124 Watergap RoadPrestonsburg, KY 41653
606-874-8036 • 800-955-9457 • Fax: 606-874-0013
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 71
© 2014 Yanmar America Corp.
RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM.Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR.
RuleTheJobsite.com
Corp.anmar America 2014 Y Yanmar America ©
BUCK & KNOBBYEQUIPMENT CO.6220 Sterns Rd
Ottawa Lake, MI 49267734-856-2811
CUSTOM TRUCK &EQUIPMENT
7701 Highway 24Kansas City, MO 64125
800-861-1065www.cte-equipment.com
2801 Beverly Dr.Aurora, IL 60502630-820-3030
PO Box 224Eureka, IL 61530309-467-3716
1801 179th Ave.Moline, IL 61244309-751-9540
13402 Britton Park Rd.Fishers, IN 46038317-842-1040
3566 Citadel CircleNewburgh, IN 47630
812-490-4400
3310 West Coliseum Blvd.Fort Wayne, IN 46808
260-484-2494
PO Box 27317550 Chesterfield Airport Rd.
Chesterfield, MO 63006636-532-2332
1005 Thorez Rd.Jackson, MI 49201517-750-3783
1196 A Franklin St.Marne, MI 49435616-677-5900
VERMEER OF IOWAPO Box 168-661 Hwy T14
Pella, IA 50219641-628-2000
Vermeer Siouxland4858 D Ave.
Marcus, IA 51035712-376-2310
Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444
PAINT VALLEY EQUIPMENT10550 Twp Rd. 262
Millersburg, OH 44654877-774-0081330-674-4031
ROEDER IMPLEMENT INC.2550 Rockdale Rd.Dubuque, IA 52003
563-557-1184Fax: 563-583-1821
VERMEER MIDWEST
Page 72 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Berry Tractor & Equipmentwww.berrytractor.comKSGarden City620-277-2290 • 877-469-1763Topeka785-266-9509 • 877-469-1763Wichita316-943-4246 • 877-469-1763MOSpringfield417-831-2651 • 877-469-1763
Brandeis Machinery & Supply Companywww.brandeismachinery.comINEvansville812-425-4491Ft. Wayne260-489-4551Indianapolis317-872-8410KYCorbin606-528-3700Lexington859-259-3456Louisville502-491-4000Paducah270-444-8390Stanville606-478-9201
Columbus Equipmentwww.columbusequipment.comOHCadiz740-942-8871Canton330-453-4521Cincinnati513-771-3922Columbus614-443-6541Dayton937-879-3154Painesville440-352-0452Perrysburg419-872-7101Piketon740-289-3757Richfield330-659-6681Zanesville740-455-4036
Continental Equipment Corp.www.ceceq.comMIGrand Rapids616-538-2400Lansing517-321-8000New Hudson248-437-8121Northeast Detroit - Lenox586-727-7502Saginaw - Bridgeport989-777-0090Traverse City - Williamsburg231-267-5060
Every Komatsu Tier 4 construction machine comes standardwith Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges.With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
MIDWEST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
Cat 297D, 297D XHP Multi-TerrainLoaders Feature Innovative DesignThe Cat 297D and 297D
XHP multi-terrain loadersfeature a dual suspensionundercarriage, completelynew modular cab,redesigned vertical liftloader linkage with Cat intel-ligent leveling, largerengines and enhanced per-formance compared with CSeries models. New elec-tronic controls and the newadvanced display enhanceoperator efficiency and anavailable industry-exclusiverearview camera enhancesoperator awareness. The newmachines excel in applica-tions where high power, high traction and limited ground dis-turbance are needed, such as residential construction, land-scaping operations and snow removal work, according to themanufacturer.Rated operating capacities (50 percent of tipping load) are
4,550 and 5,000 lbs. (2,063 and 2 268 kg), respectively. Thenew Cat C3.8 DIT engine develops respective net ratings of95 and 106 hp (71 and 79 kW) and meets US EPA Tier IVInterim and EU Stage IIIB emission standards. The D Seriesmodels accommodate required emissions controls with nocompromise in serviceability and with no interruption ofwork cycles.Compared with the C Series models, the 297D has
increases in horsepower of 4 percent, torque rise of 13 per-cent, and lift force of 19 percent. The 297D XHP featuresincreases in horsepower of 17 percent, peak torque of 27 per-cent; lift force of 19 percent; and rated operating capacity of10 percent. In addition, the 297D XHP incorporates an aux-iliary hydraulic system featuring a relief pressure of 4,061 psi(28,000 kPa) and outputs to 40 gpm (150 Lpm), resulting in95 hydraulic hp (71 kW) — 22 percent more than the 297C— for powering the most demanding work tools.The one-piece D Series cab is completely new — sealed,
pressurized and independent of the chassis. The new cab isspacious, quiet and available with a high back, heated, airride seat with seat-mounted adjustable joystick controls.Heating and cooling rates are increased 50 percent, alongwith 20 percent more airflow and a 50 percent boost in pres-surization. The advanced display (available for the 297D, standard
for the 297D XHP) integrates a security system that canaccommodate up to 50 operators and uses a full color, 5-inchLCD that enables on-screen adjustment of implementresponse, hydrostatic drive response and creep control speed.The system also expands diagnostic capability and allowsmaster code holders to review operator specific machine per-formance. An available rearview camera system uses thescreen to display high resolution images to increase the oper-ator’s job site awareness.For optimum machine control, the Cat intelligent leveling
(ILEV) system enables three production enhancing features:electronic dual self-leveling (automatically levels the loadboth raising and lowering); return-to-dig (automatically low-ers lift arms and returns work tools to a preset angle); and
work-tool-positioning (auto-matically returns attach-ments — cold planer ortrencher, for example — to apreset angle after reposition-ing the machine). When the new dial-type
throttle in the D Series cab ispaired with a foot throttle,the pedal functions as adecelerator (when the dial inthe high idle position), pro-viding an added degree ofcontrol and safety byenabling operators to quick-ly reduce engine/travelspeed. A new throttlesmoothing feature electroni-
cally “clips” the extremes of throttle pedal movement inrough terrain to yield steady, even travel speeds for operatorcomfort and material retention.
Design FeaturesThe undercarriage for the 297D and 297D XHP uses a
durable rubber track, which is lightweight, pliable and rein-forced with high tensile strength cords. The machines exertminimal ground pressure for superior operation in softunderfoot conditions. Multiple wheels distribute the machineweight over the track, and an elevated roller sprocket ensurespositive track drive. The multi-terrain loader dual-level suspension system
uses heavy duty torsion axles to attach the undercarriage tothe tractor and to attach the oscillating bogie wheel frames.The shock-absorbing capability of the torsion axles and theoscillating bogie wheels, which allow the track to conform tothe terrain, ensure a comfortable ride for the operator, opti-mum retention of bucket loads, steady traction and loweroperating costs, resulting from more effectively isolating thetractor from shock loads.A new cooling system design uses a hydraulically driven,
on-demand fan to draw air from the rear of the machine andthrough the side-by-side radiator and hydraulic oil cooler atthe top of the engine compartment. In addition, the systemdraws cool air from the engine compartment and mixes itwith the exhaust stream to reduce temperatures at the stackoutlet, and the stack is positioned to direct exiting exhaustinto the fan blast to quickly dissipate heat.Lift arms for D Series machines have been redesigned and
now use one-piece tubular design that adds strength to theloader linkage and retains excellent lift characteristics whileresulting in a narrower profile that improves visibility to thesides of the machine, to the work tool, and to the worktool/coupler interface. The overall advantage is increasedsafety, according to the manufacturer.The available automatic work tool coupler is now electri-
cally actuated, replacing the previous hydraulically actuatedcoupler. The new coupler is simpler in design, eliminatinghoses and connectors, and easier to install as an accessory inthe field.For more information, visit www.cat.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Compared with the C Series models, the 297D hasincreases in horsepower of 4 percent, torque rise of13 percent and lift force of 19 percent.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 73
www.komatsuamerica.com
LOADERSFrom Komatsu - The Loader Experts
.
Diesel Machinery, Inc.www.dieselmachinery.comSDAberdeen605-725-4364 • 888-762-6312Rapid City605-348-7438 • 800-658-3047Sioux Falls605-336-0411 • 800-456-4005
General Equipment & Supplieswww.genequip.comNDBismarck701-223-9700 • 800-279-4437Fargo701-282-2662 • 800-437-2924Minot701-852-0479 • 800-825-0479Williston701-572-0570
Road Builders Machinery & Supply Co., Inc.www.roadbuildersmachinery.comKSKansas City913-371-3822NEGrand Island308-384-2620Lincoln402-325-0447Omaha402-331-9200
Road Machinery & SuppliesCo.www.rmsequipment.comIACedar Rapids319-363-9655 • 800-616-6615Des Moines515-282-0404 • 800-555-1445Sioux City712-252-0538 • 800-633-9104ILMilan309-787-1742 • 800-633-9114MNDuluth218-727-8611Savage952-895-9595 • 800-888-9515Virginia218-741-9011 • 800-752-4304
Roland Machinery Co.www.rolandmachinery.comILBolingbrook630-739-7474Carterville618-985-3399Marengo815-923-4966Springfield217-789-7711INPortage219-764-8080MIEscanaba906-786-6920MOBridgeton314-291-1330Cape Girardeau573-334-5252Columbia573-814-0083Palmyra573-769-2056WIDeForest608-842-4151DePere920-532-0165Eau Claire715-874-5400Franksville262-835-2710Schofield715-355-9898
T M
.komatsuamerica.com/komatsu-carwww
e .komatsuamerica.com/komatsu-car
Page 74 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
pile drive. A second 300T crawlercrane [also a Manitowoc] will beused to suspend the leads anddiesel hammer [D160-42] for thefinal drive.”In addition to the span being
impacted by the geographic con-straints of the Cuyahoga River andwest slope, the project will have todeal with issues posed by the oper-ations of the CSX railroad, NorfolkSouthern elevated train trestle,Greater Cleveland RegionalTransit Authority rail, and otherswhich present significant chal-lenges for steel erection. TGR willuse two 300T crawler cranes (alsoManitowoc 2250 Series III) toerect the structural steel.“Another significant challenge
will be the erection of the delta‘knuckle,’” said Graczyk, “whichwill be grouted and post tensionedto the pier caps.”The river poses its own unique
challenges, but TGR, via seriouspre-planning, will mount a 300Tcrawler crane (Manitowoc 2250Series III) on a barge to erect thestructural steel spanning the river.“In an effort to offset the
reduced lift capacity of the craneon the barge, additional fieldsplices were added to the super-structure plate girders to reduce theweight of the lifts from the water,”said Graczyk. “The delta legs ofthe piers adjacent to the river, thatcantilever over the river, will beerected with the crane mounted onthe barge while a second 300Tcrawler on land will erect theopposite delta leg, as well as thepermanent tension tie.“Once the deltas are constructed
atop the piers,” he added, “shorterplate girder sections will be can-tilevered out into the river to adjustthe geometry of the structure andto provide a more feasible gap toerect the closure sections. Thecrane mounted on the barge willcomplete the span over the river by
erecting the ‘drop-in’ sections.”The construction schedule was
developed at an early stage duringthe estimate based on past experi-ence of bridge projects. “Construction of the pier foun-
dations [i.e. pile driving] begin inmid-July, with substantial comple-tion of the bridge scheduled for thefall of 2016,” said Graczyk.Primavera P6 scheduling softwareis being utilized by TGR to moni-tor the progress of the work.”The project will require a fair
amount of cranes to construct thebridge piers and deck — crawlercranes ranging from 150 to 275tons (136 to 249 t). Equipment onthe job will include Manitowoc2250 and Manitowoc 888 cranes, aTerex RT 780 crane, a KomatsuP220 tracked excavator, Caterpillartracked excavators — 330, 336and 360s, and John Deere dozers— 650 and 850s. The equipment iscoming from all three of the jointventure companies. As well, anAPE D160 hammer was pur-chased specifically for use in thisproject. When construction peaks, there
will be 150 to 200 workers on site.This number does not include thenecessary support staff, qualityassurance, designers and othersworking on the project, which iftotaled, would bring the number
closer to 500. All three companieswhich make up Trumbull-GreatLakes-Ruhlin have contributedcrews to the project.Major subcontractors to be
brought in for the project include:The Joseph B. Fay Company fordemolition, Controlled DemolitionInc. for the explosive demolitionportion, Amelie Construction &Supply to finish and install steel invarious sections of the structure,Foundation Steel to furnish andinstall rebar, The Shelly Companyfor asphalt paving and MillerCable for electrical work includingthe aesthetic lighting.Scheduling for the project is in
the final stages.“Prior to the start of any new
activity on the job a pre-activitymeeting is held which gathers allinvolved to discuss that particularaspect of the project,” said KarenLenehan, public information con-sultant to TGR. “Weekly meetingsare held to keep schedules co-ordi-nated. The schedule has beendeveloped so it is sequenced foryear-round work. Weather sensi-tive activities like pouring decksand painting is scheduled forwarmer months and structural steelerection and pile driving can bedone through the winter months.”Temporary offices have been set
up close to the job site which house
both TGR and ODOT officials.“It is a set up that allows easy
and constant communicationbetween TGR, URS, ParsonsBrinkerhoff, the quality assurancepartner on the job, and ODOT,”said Lenehan.The new bridge will require a
vast amount of material, including:11 million lbs. (5 million kg) of Hpile, 37 million lbs. (16.8 millionkg) of structural steel, 11 millionlbs. of rebar, and 7,400 trucks fullof concrete.“Timely, staged deliveries are
scheduled, so as materials aretrucked in they can be used direct-ly from the truck,” said Lenehan.“Some of the specialty items, suchas ornamental railings, will bestored at a location just off the jobsite. This site houses field trailersand offers space for equipment
storage as well. Piling was orderedin March of 2014 and structuralsteel has a lead time of 10 to 12months, so it will be ordered anddelivered over a course of ninemonths, with delivery to begin in2015.”Many barges will be employed
on the project and a crane will beused to load them. No temporaryroad will be required to support theconstruction.The joint-venture will have one
master mechanic on site, and spacehas been set aside for repair facili-ties, storage sheds for spare parts,temporary offices, fueling stationsand depots for oils.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.) CEG
BRIDGE from page 50
The construction schedule was developed at an early stage duringthe estimate based on past experience of bridge projects.
The river poses its own unique challenges, but TGR, via seriouspre-planning, will mount a 300T crawler crane (Manitowoc2250 Series III) on a barge to erect the structural steel spanningthe river.
The $273 million eastbound bridge, under design by URSCorporation, is intended to be a sister bridge to the westboundbridge, a $293 million project that was built by WalshConstruction. Both projects were let as design-build projects.
Rail Lines, Cuyahoga River Among Bridge Challenges
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 75
Battle Creek, MI269.965.1269Byron Center, MI616.878.7450Kentwood, MI616.698.2960Lansing, MI517.272.5033Muskegon, MI231.798.8754New Hudson, MI248.356.5200Romulus, MI734.641.8238Saginaw, MI989.752.9400Sterling Hts, MI586.977.6000Traverse, MI231.943.3700Wixom, MI248.449.6700Wixom, MI(Cons. Division)248.356.5200Zeeland, MI616.748.4108
Alsip, IL708.389.7700East Peoria, IL309.694.4455Rockford, IL815.227.0555Springfield, IL217.789.0351Villa Park, IL630.530.7600
Buford, GA678.318.9500Forest Park, GA770.319.0074Savannah, GA912.964.8079
Asheville, NC828.687.0620Charlotte, NC704.596.8283Greenville, NC252.754.5280Raleigh, NC919.661.8710Bismarck, ND701.250.4882Fargo, ND701.271.2360Minot, ND701.250.4882
Charleston, SC843.414.1120Columbia, SC803.791.0740Piedmont, SC864.704.1060
Chattanooga, TN423.308.7940Knoxville, TN865.525.1845
Evansville, IN812.867.6661Fort Wayne, IN260.482.3681Indianapolis, IN317.247.9125Corbin, KY606.528.9440Louisville, KY502.456.4050Prestonsburg, KY606.874.2104St. Louis, MO314.487.8925
McALLISTEREQUIPMENT CO.
Contact your local dealer:
Volvo Construction Equipment
* Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.
YOU CHOSE GUARANTEED* FUEL EFFICIENCYWITH EXCEPTIONAL DEALER SUPPORT.
Smart Works.
Page 76 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
4 6 4 0 E & 5 2 4 0 E P O W E R 2 S K I D L O A D E R S
HIGH OPERATING CAPACITIES –
POWER UP –
EXCEPTIONAL HYDRAULICS –
ACCELERATE RAPIDLY –
POWERED UP
Download co-op ads from the Gehl Ad Portal.Please visit www.gehl.com/ad
Username: dealer / Password: password
TIME TO GET
Alta Equipment Company28775 Beck Rd.Wixom, MI 48393248-449-6700
Fax: 248-449-6701www.altaequipment.com
2470 W. Columbia Ave.Battle Creek, MI 49015
269-965-1269Fax: 269-965-1881
8840 Byron Commerce SWByron Center, MI 49315
616-878-7450Fax: 616-878-7650
4716 Talono Ct. S.E.Kentwood, MI 49512616-698-2960
Fax: 616-698-2901
6327 Jomar Ct.Lansing, MI 48917517-272-5033
Fax: 517-272-7257
5920 Grand Haven Rd.Muskegon, MI 49441231-798-9754
Fax: 231-798-9387
28855 Smith Rd.Romulus, MI 48174734-641-8238
Fax: 734-641-8334
1524 Champagne Dr.Saginaw, MI 48604989-752-9400
Fax: 989-752-9834
7500 E. 15 Mile Rd.Sterling Hts., MI 48312
586-977-6000Fax: 586-977-6099
9433 Riley St.Zeeland, MI 49464616-748-4108
Fax: 616-748-4120
476 US 31 SouthTraverse City, MI 49685
231-943-3700Fax: 231-943-8110
56195 Pontiac TrailNew Hudson, MI 48165
248-356-5200Fax: 248-356-2029
Elder Ag and TurfEast Palestine, OH330-426-2166
4805 Scooby Ln. NWCarroll, OH 43112866-262-4181740-654-5304
Fax: 740-687-9130
Cleveland Branch525 Golden Oak Pkwy.
Oakwood Village, OH 44146440-439-4567
Fax: 440-439-1789
Company Wrench3668 US Route 23 SouthPiketon, OH 45661740-289-3294
Cincinnati Branch3120 S. Verity Pkwy.
Middletown, OH 45044513-649-8105
Fax: 513-649-8107
7019 Brookville Rd.Indianapolis, IN 46239
317-375-7790Fax: 317-375-7792
1554 Old Frankfort PikeLexington, KY 40504
866-262-4181Fax: 859-254-1107
Custom Truck & Equipment7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 77
© Kubota Tractor Corporation, 2014
www.kubota.com
Gear up with year-end fi nancing on SVL75 Series compact track loaders!
$0 Down, 0% Financing, for up to 60 Months*
A.P.R.
www.arnoldsinc.comArnold’s of Kimball
701 State Hwy 55 E • Kimball, MN 55353320/398-3800
Arnold’s of Glencoe655 Lindbergh Trail • Glencoe, MN 55336
320/864-5531
Arnold’s of St. Martin374 Industrial Drive • St. Martin, MN 56376
320/548-3285
Arnold’s of Mankato1715 Howard Drive • No. Mankato, MN 56003
507/387-5515
Arnold’s of St. Cloud2995 Quail Rd. NE • Sauk Rapids, MN 56379
320/251-2585
BURRIS EQUIPMENT CO.www.burrisequipment.com
2216 N. Green Bay Rd. • Waukegan, IL 60087847/336-1205
Fax: 847/336-2697
27939 W. Concrete Dr. • Ingleside, IL 60041815/363-4100
2001 Cherry Hill Rd. • Joliet, IL 60433815/464-6650
Fax: 815/464-6951
COLUMBUS EQUIPMENT COMPANYwww.columbusequipment.com
50 Kingston Ave. • Columbus, OH 43207614/443-6541
12500 Williams Road • Perrysburg, OH 43551419/872-7101
7570 New Carlisle Pike • Dayton, OH 45424937/879-3154
1st CHOICE EQUIPMENT LLC124 N. Schmale Rd. • Carol Stream, IL 60188
630/510-6050Fax: 630/510-6051
1305 Sentry Drive • Waukesha, WI 53186262/521-5802
Fax: 262/521-5801
ABC EQUIPMENT RENTAL & SALES INC.www.abcequipment.com
29 Pearl Rd. • Brunswick, OH 44212888/572-3888
Fax: 330/220-4949
38525 Chester Rd. • Avon, OH 44011440/934-7368
6140 Highway 10Anoka, MN 55303888/448-5266
3021 133rd St. SWShakopee, MN877/753-6100
LANO EQUIPMENT INC.www.lanoequip.com
HAUG-KUBOTA, LLC.www.haugkubota.com
East Highway 123585E. Hwy 12
Willmar, MN 56201320/235-2717
Fax: 320/235-2771
BIRKEY’S CONSTRUCTION EQUIPMENT
2202 S. High Cross Rd.Urbana, IL 61802800/798-1772
Fax: 217/337-1775
NIEBUR TRACTOR & EQUIPMENT, INC.
www.nieburtractor.comHastings, MN888/839-6860
23580 Highway 55Loretto, MN888/479-4342
Page 78 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Thirty years after Hamm builtthe first oscillatory rollers, thisintelligent technology is now mak-ing its debut in the minus 9,000 lbs.weight class at Hamm. A total offour models with oscillation tech-nology are available, identifiableby an “O” in the name: HD 10 VO(5,500 lbs. [2,494 kg]), HD 12 VO(6,000 lbs. [2,721 kg]), HD 13 VO(8,800 lbs. [3,991 kg]) and HD 14VO (9,500 lbs. [4,309 kg]). All ofthem are equipped with one oscil-latory and one vibratory drum.
The advantage of oscillation is itachieves a rapid increase in com-paction because the oscillationdrum directs tangential thrustingforces into the material to be com-pacted while remaining constantlyin contact with the ground. Thecombination of continuously act-ing static load and changingdynamic shear forces in the materi-al brings about a faster, better andmore gentle compaction.Moreover the amplitude and inturn the compaction power adaptautomatically to the stiffness pres-ent. Hamm achieves this effectwithout electronics, but throughintelligent application of the lawsof physics.
Wide ApplicationSpectrum for Oscillatory
RollersThe new Hamm rollers with one
oscillatory and one vibratory drumincrease compaction speed andquality, according to the manufac-turer. Applications can be found inurban centers for example. Thereason: oscillation drums can com-pact dynamically even on narrowconstruction sites, because thiscompaction technology does notdisturb buildings or pipeworkbelow the road surface throughvibration.
Oscillation also optimizes com-paction at joints to existing roadsurfaces, because it does not dam-age the cold asphalt. So the com-paction on small job sites will bemore effective than before whenusing oscillatory rollers.
During the compaction of thinlayers on tack coat or spray seal,the high compaction speed makesa noticeable improvement. A fur-ther plus point in favour of oscilla-tory rollers is that they also workvery efficiently on cooled asphalt.
Last but not least, oscillatorycompaction also optimizes manylandscaping applications. Water-
bound path surfaces or asphaltcycle paths can be compacted sig-nificantly more efficiently with thenew rollers than heretofore.
HD 10C VT Combi RollerThe HD 10C VT is the smallest
combi roller in the CompactLinewith a working width of 3.5 ft.(1.06 m) and operating weight of3,500 lbs. (1,587 kg). It comeswith permanent all-wheel drive asstandard. This distinguishes itfrom all other compact rollers inthis size and gives it outstandinggradeability in all situations,according to the manufacturer.
New Options: Drivers’Cab and Chip SpreaderHamm has developed a fully-
enclosed driver’s cab for thelargest models in the compactclass, the HD 13 and HD 14. Thepanoramic cabin features full
height glazing and provides anoverview of the construction site.Hamm also has thought aboutmany other niceties and safety fea-tures: heating, radio, screenwipers, four halogen front head-lights (H9) and two rear spotlightsare some of the cab options.
With its own chip spreaders forthe CompactLine, Hamm offers acomplement to the rollers forrepair work on motorways or otherheavily used roads. The linearspreader has stepless adjustmentand is operated from the driver’sseat. Its diffusion grill produces aremarkably even distribution pat-tern. The chip spreader is availablein two spreading widths: 3.28 ft. (1m)/53 gal. (200 L) or 3.95 ft. (1.20m)/63 gal. (240 L). Mounting iseasy with a forklift truck and themounting point close to themachine frame ensures a favorableweight distribution.
Drum Lighting and HingedScraper for More Quality
and SafetyHamm has included an extreme-
ly bright drum lighting in its pro-gram for the entire CompactLine.The environment-friendly LEDlighting brings good illuminationto the working area. This is animportant quality and safety fea-ture, as the compact rollers fre-quently work at the end of theroller group in poorly illuminatedareas.
Another new option for allCompactLine models is the springloaded hinged scraper. It keeps thedrums clean while compacting andcan be hinged out of the way bymeans of a foot pedal for replace-ment or cleaning.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
SECT IONPavingPages 79-89
Hamm Adds Four Models With Oscillation TechnologyHamm offers two dif-ferent chip spreadersfor rollers from 5,000lbs. (2,268 kg) operat-ing weight.
There are countless areas of application for Hamm’s CompactLine with oscillation, for example thecompaction of thin layers on tack coat or spray seal, asphalt compaction in confined urban areasor along joints and even compaction of water-bound path surfaces in landscape gardening.
Page 80 • October 25, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Contractors Need Small, Powerful Machines for Tight SpacesBy Jeff WinkeSPECIAL TO CEG
Some projects have small, tight spacesthat require compact equipment with themaneuverability of a sports car, not an 18-wheeler. In these cases, contractorsemploy small dozers, mini-excavators andcompact track loaders. Add to that mix asmall milling machine specifically suitedfor removing road pavements, millingpavement strips, or milling tie-ins.
The latest addition from Roadtec Inc. toits line of milling machines is the RX-100e— a highly maneuverable mini-size millwith a base cutting width of 20-in. (50 cm),maximum cutting depth of 8-in. (20 cm),and a drum diameter with teeth of 30-in.(75 cm).
The weight, power and dimensions ofthis compact machine make it the perfectoption for cutting trenches, demarcationand cutting around manhole covers, or forother narrow spaces. The RX-100e fea-tures a shipping weight of 15,840-lbs.(7,184 kg), a length of 12-ft. 8-in. (3.87m), and a width of 4-ft. 8-in. (1.42 m).
The RX-100e is a 140 hp (103 kW)machine with a hydraulically driven drumand features large access doors on bothsides of the machine for maintenance
access to the interior components. A Cummins QSB 4.5 Tier IVi compliant
diesel engine powers the small utility coldplaner. The RX-100e 140 hp engine iscooled by a high-efficiency variable speedfan. The speed of the fan is based on cool-ing demand, which is designed to decreasethe engine load and increase the fuel econ-omy of the machine.
To add functional versatility, the right,rear leg tube on the RX-100e is positionedalongside the cutter housing for normalmilling, but the leg tube also can be rotat-ed to a position in front of the cutter hous-ing for flush cut operations.
The operator station includes simplecontrols and the operator seat, which incor-porates comfort suspension and can slideout to the right of the machine forenhanced visibility.
The Roadtec RX-100e utility millingmachine is expected to be the ideal choicefor congested urban areas and other con-fined work sites.
Jeff Winke is a business and construc-tion writer based in Milwaukee, Wis. Hecan be reached throughwww.jeffwinke.com.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
The latest addition from Roadtec Inc. to its line of milling machines is the RX-100e— a highly maneuverable mini-size mill with a base cutting width of 20-in. (50 cm),maximum cutting depth of 8-in. (20 cm), and a drum diameter with teeth of 30-in.(75 cm).
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2014 • Page 81
THE COMPACTION EXPERTS
Our rollers are pretty basic.Basically perfect.BOMAG improves on perfection with the BW120AD-4 roller.Want a roller that will fi nish the job better, faster and more effi ciently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG.
To do the best job, you need the best equipment.To learn more visit www.bomag-americas.com,
or call 1-800-78-BOMAG today.
1400 W. Ogden Ave.Naperville, IL 60563
630/355-7150
Rockford, IL815/961-3160
South Holland, IL708/331-6362
Wauconda, IL847/526-7700
Rockdale, IL815/730-9011
www.wilsonequipment.com2180 Old Frankfort PikeLexington, KY 40510
859-254-64431-800-432-0913
828 W. Cumberland GapPkwy.
Corbin, KY 40701606-528-0700
1-800-274-94572124 Watergap Road
Prestonsburg, KY 41653606-874-8036
1-800-955-9457
200 Erb Industrial Dr.Fenton, MO, 63026
636/349-0200
Foristell, MO636/463-2500
Cape Girardeau, MO573/334-0563
Cuba, MO573/885-0500
Paducah, KY270/554-1131
Mount Vernon, IL618/244-6800
10874 East Pike Rd.Cambridge, OH 43725
740-432-6303www.southeasternequip.
comEvansville, IN 47715
812-476-7321
Fort Wayne, IN 46808260-483-8868
Indianapolis, IN 46268317-872-4877
Burlington, KY 41005859-586-6133
Holt, MI 48842517-694-0471
Novi, MI 48374248-349-9922
Brilliant, OH 43913740-598-3400
Brunswick, OH 44212330-225-6511
Cambridge, OH 43725740-432-6303
Dublin, OH 43016614-889-1073
Gallipolis, OH 45631740-446-3910
Heath, OH 43056740-522-3500
Mansfield, OH 44903419-529-4848
Marietta, OH 45750740-374-7479
Mentor, OH 44060440-255-6300
Monroe, OH 45050513-539-9214
North Canton, OH 44720
330-494-3950
Perrysburg, OH 43551419-874-0331
Troy, OH 45373937-416-6397
W250 N6851 Hwy 164
Sussex, WI 53089262/246-5700
262/246-5719 Fax
Madison, WI608/222-9191
Eau Claire, WI715/832-3443
De Pere, WI920/338-5800
Abbotsford, WI715/223-2381
Negaunee, MI906/475-4181
Page 82 • October 25, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Announcing Our New Distributor in ArizonaThe Worldwide Leader in Concrete Paving Technology
[email protected] � www.gomaco.com
CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKS RECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS
GOMACO CORPORATION IN IDA GROVE, IOWA, USA � THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY � 712-364-3347
ROAD MACHINERY & SUPPLIES CO.Des Moines, IA
515/282-0404 • 800/555-1445
Sioux City, IA
712/252-0538 • 800/633-9104
Cedar Rapids, IA
319/363-9655 • 800/616-6615
Milan, IL
309/787-1742 • 800/633-9114
SWANSTON EQUIPMENT COMPANY3450 West MainFargo, ND 58103
800/369-0371
4100 Hwy-52 SouthMinot, ND 58701
800/210-8766
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2014 • Page 83
Page 84 • October 25, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Wirtgen’s Tier IV Interim W 250iWIDRIVE Matches Brain With Brawn
Wirtgen’s Tier IV interim-compliantW 250i offers high rates of productivi-ty, maximum cost efficiency and fuel-efficient i-machine technology. Thislarge cold mill can remove asphalt lay-ers with a milling depth of up to 14 in.(35.5 cm), and cut portland cementconcrete surfaces at a high advance rate.
This is possible due to its muscularpower plant, matched with WIDRIVEintelligent machine management sys-tem, three selectable milling drumspeeds, and dual engine concept, whichkeeps operating costs exceptionallylow for a cold milling machine in thisperformance class, according to themanufacturer.
The dual engines of the W 250i —also seen on the W 210i — makes vir-tually two machines in one: a high-per-formance milling machine with the fullpower of two engines totaling 990 hp,and a cost-efficient mill with a singleengine at 599 hp to economicallyremove softer asphalt surface coursesor porous asphalt, for example.
The machine operator can set theoptimum drum speed for any job fromthe operator’s platform via a selectorswitch, allowing him to adapt immedi-ately to changing conditions.
For standard milling jobs, such asthe removal of a surface course, the W250i can operate with the mediummilling drum speed of 1,800 rpm,which produces reclaimed asphaltpavement (RAP) at preferred aggregatesizes. When removing thin surfaces atthe maximum advance rate, the highmilling drum speed of 2,000 rpm maybe selected, producing a superiormilling texture. And for maximum pro-ductivity at lowest cost, the slowestspeed of 1,600 rpm is the right choicefor reduced fuel consumption and lowcutting tool wear.
The W 250i’s standard cutting widthis 7 ft. 3 in. (2.2 m), but this can beextended with additional drum units forworking widths of 8 ft. 2 in., 10 ft. 2 in.,11 ft. 6 in., 12 ft. 6 in., and 14 ft. 5 in.(2.5, 3.1, 3.5, 3.8 and 4.4 m). Theoptional FCS Light quick-change sys-tem for milling drums permits a varietyof different milling operations via dif-ferent milling drums.
At the operator’s platform, a multi-functional control display serves as apractical information hub. It can beswung to the left or right of the opera-tor, together with the level pro control
panel, and displays operating status andservice data.
The control display provides user-friendly diagnostic options with cleargraphics for identifying the source ofany problem. Another handy functionis the logging of job data at the end ofthe day, showing how many truckshave been loaded and the overall ton-nage achieved.
Wirtgen's WIDRIVE machine man-agement system handles many tasksfor the operator in automatic processchains, making it easy to learn how tooperate and control the W 250i. Anoptional camera system with two or sixcameras also is available to monitor upto six working areas on the control dis-play.
The optional parallel-to-surface(PTS) system automatically aligns theW 250i parallel to the road surface,ensuring simple, accurate operation ofthe machine in demanding profilingjobs. PTS also assists the operator inpositioning the machine in the milledcut to initiate the milling process. Inautomatic mode, the system takes careof all the steps that the operator wouldotherwise need to select manually, oneafter another.
The operator activates the level prolevel control system at the flick of aswitch, and all four crawler track unitsof the large milling machine are low-ered simultaneously at high speed.When the milling drum unit reaches thesurface to be milled, the lowering speedis reduced and the milling drum slowly
penetrates the material down to the setdepth. The automatic process helps toprevent excessive cutting tool wear oreven tool failure when milling starts.
The same applies when the W 250iis aligned transverse to the direction oftravel. In many cases, cold millingmachines need to overcome signifi-cant differences in height when beingmoved into or out of the milled cut.The integrated four-fold, full-floatingaxle balances out all four track unitsquickly and reliably to reduce themachine’s lateral inclination to a min-imum. This lends a high degree of sta-bility to the large milling machinewhile the operator moves forward nor-mally, according to the manufacturer.
The W 250i’s intelligent speed con-trol (ISC) system prevents crawlertrack slip and ensures perfect tractionof all track units to achieve maximummilling performance. This, in turn,reduces track pad wear. When negotiat-ing bends, the ISC system automatical-ly increases the speed of the outercrawler tracks depending on the steer-ing angle. As a result, even extremelynarrow bends can be milled using theall-track drive.
An optional vacuum cutting system(VCS) to reduce particulate emissionsat the cutter head is available.
For more information, call 615/501-0600 or visit www.wirtgenamerica.com.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The dual engines of the W 250i — also seen on the W 210i — makes vir-tually two machines in one: a high-performance milling machine with thefull power of two engines totaling 990 hp, and a cost-efficient mill with asingle engine at 599 hp to economically remove softer asphalt surfacecourses or porous asphalt, for example.
ROLAND MACHINERYSpringfield, IL217/789-7711Carterville, IL618/985-3399Portage, IN
219/764-8080Bridgeton, MO314/291-1330
Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056Eau Claire, WI715/874-5400DePere, WI
920/532-0165Deforest, WI608/842-4151Franksville, WI262/835-2710Schofield, WI715/355-9898
2600 S. Lincoln Rd.Escanaba, MI906/786-6920
Fax: 906/786-5813
TITAN MACHINERY - BISMARCK1500 Industrial Dr.Bismarck, ND 58501
701/250-7925 • 800/247-1282Fax: 701/250-79243079 Energy Drive
Dickinson, ND 58601701/227-5309 • 888/418-2873
Fax: 701/225-90784001 38th Street SWFargo, ND 58104
701/237-3333 • 800/342-4330Fax: 701/237-3336
1601 North Washington St.Grand Forks, ND 58203
701/775-8111 • 800/962-7410Fax: 701/775-81085015 Hwy 2 EastMinot, ND 58701701/852-3188
1741 Deadwood Ave.Rapid City, SD 57702
605/388-0266 • 888/388-0266Fax: 605/388-92104201 N. Cliff Ave.
Sioux Falls, SD 57402605/336-3434 • 800/262-5373
Fax: 605/336-345613954 West Front StreetWilliston, ND 58801
701/577-0024 • 877/570-4635Fax: 701/577-0027
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2014 • Page 85
www.casey-equipment.com1603 East Algonquin Rd.
Arlington Heights, IL 60005847/437-8686
Fax: 847/437-8738
16754 New Ave. Lemont, IL 60439630/257-1261
Fax: 630/257-06141548 Huntwood Drive
Cherry Valley, IL 61016815/332-8222
Fax: 815/332-3056
RMS RENTALS12520 Quentin Ave S.
Suite 100Savage, MN 55378
952/895-9595800/888-9515
5633 W Hwy 13Savage, MN 55378
952/895-9595800/888-9515Duluth, MN218/727-8611800/888-9535
Virginia, MN218/741-9011800/752-4304Negaunee, MI906/475-6488800/888-9565
Sioux City, IA217/252-0538800/633-9104
Des Moines, IA515/282-0404800/555-1445
Cedar Rapids, IA312/363-9655800/616-6615
Milan, IL309/787-1742800/633-9114
CASEY EQUIPMENT COMPANY ROAD MACHINERY & SUPPLIES CO.
Page 86 • October 25, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
The News, Equipment and all theinformation you need to keep upwith the Construction industry
@www.construction
equipmentguide.com
Surf theInternet
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2014 • Page 87
DePere WI920/532-0165
Fax: 920/532-0526Deforest WI608/842-4151Franksville WI 262/835-2710Schofield WI 715/355-9898
Eau Claire, WI715/874-5400Escanaba MI906/786-6920Springfield, IL217/789-7711Marengo, IL815/923-4966
Bolingbrook IL630/739-7474Carterville, IL618/985-3399Bridgeton, MO314/291-1330
Cape Girardeau, MO573/334-5252
Columbia, MO573/814-0083Palmyra, MO573/769-2056Portage, IN219/764-8080
ROLAND MACHINERY BRANDEIS MACHINERY & SUPPLY COMPANY
1801 Watterson Tr.Louisville, KY 40299
502/491-4000 • Fax: 502/499-3195www.brandeismachinery.com
Evansville, IN812/425-4491 • Fax 812/425-1171
Corbin, KY606/528-3700 • Fax 606/528-9014
Lexington, KY859/259-3456 • Fax 859/254-0783
Stanville, KY606/478-9201 • Fax 606/478-9208
Paducah, KY270/444-8390 • Fax 270/575-4907
Indianapolis, IN317/872-8410 • Fax 317/872-8417
Ft.Wayne, IN260/489-4551 • Fax 260/489-1620
Des Moines, IA800/822-2212Fort Dodge, IA800/362-2487Sioux City, IA800/352-4693Waterloo, IA800/772-2019
Dodge City, KS800/794-0172Great Bend, KS800/264-4056Park City, KS800/262-0139Topeka, KS
800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434Springfield, MO888/306-2656Gering, NE
800/205-6784
Grand Island, NE800/868-4017Lincoln, NE800/416-5518North Platte, NE800/894-7060Omaha, NE
800/416-5095
MURPHY TRACTOR & EQUIPMENT CO.www.murphytractor.com
Page 88 • October 25, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Serving the Asphalt Industry for 25 Years
2006 Etnyre Centennial IIDistributor, EtnyreCentennial II, 2000 gallons,computerized w/1 ft cut-offs,14 ft spray bar, propaneheat, Sterling 7500 w/Cat C7 diesel engine, 6 spdtrans, 2 spd axle, air brakes,a/c, tires 60%, 33,000 GVW
866-430-7539
3517 Wayne White Rd., Climax, NC 27233
2008 Volvo DD138HFA Roller, 84" double drum highfrequency vibratory roller, Cummins 6.7L 173 hp dieselengine, double drum drive, scrapers, water system,ROPS canopy
2014 Marathon HEPR36 Infrared Heater, New walkbehind infrared heater, 3 ft x 3 ft, 360,000 BTU
2010 Volvo DD24 Roller, 47" double drum vibratory,hydrostatic drive, double drum drive, water system,scrapers, Cummins 32 hp water cooled diesel engine,ROPS
2000 Athey 7-12 Force Feed loader, hydrostatic drive,J.D. diesel engine, 28 ft conveyor, a/c & heat, radio,belt in good condition
2001 Blaw Knox PF 4410 Paver, Ultimat 8-16 ft elec-tric screed, Cummins diesel engine, fume extractor,power crown & slope
1998 Blaw Knox PF 3200 Paver, Omni 3E screed 10-18 1/2 electric heat (2006 year), Cummins dieselengine, power crown, slope & height, plumbed forgrade & slope, washdown hose & reel
2014 Marathon KERA10 Crack Sealer, New MarathonKERA10 walk behind crack sealer, 10 gallon materialvat, full wrap around oil jacket, manual full sweep agitation, single burner with flame out protection, oil temperature gauge, material temperature gauge,heated 3/4" discharge valve
1995 Rosco SPRH-H Chip Spreader, hydrostatic drive,Cummins 5.9L diesel engine, 12 ft spread hopperw/platform
McAllisterEquipment Co.12500 S. Cicero Ave.Alsip, IL 60803708/389-7700
Villa Park, IL630/530-7600
Rockford, IL815/227-0555
East Peoria, IL309/694-4455
Springfield, IL217/789-0351
Road Machinery& Supplies Co.Cedar Rapids, IA319/363-9655800/616-6615
Des Moines, IA515/282-0404800/555-1445
Sioux City, IA712/252-0538800/633-9104
Duluth, MN218/727-8611800/888-9535
5633 W Hwy 13Savage, MN952/895-9595800/888-9515
Virginia, MN218/741-9011800/752-4304
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2014 • Page 89
DePere, WI920/532-0165
Deforest, WI608/842-4151
Franksville, WI262/835-2710
Schofield, WI715/355-9898
Eau Clair, WI715/874-5400
Escanaba, MI906/786-6920
Springfield, IL217/789-7711
Carterville, IL618/985-3399
Bridgeton, MO314/291-1330
Cape Girardeau, MO573/334-5252
Columbia, MO573/814-0083
Palmyra, MO573/769-2056
Portage, IN219/764-8080
100 Sheridan Ave.Des Moines,
IA 50313515/282-0404
800/555-1445
2525 16th Ave SWCedar Rapids,
IA 52406319/363-9655
800/616-6615
1400 North Hwy 75Sioux City, IA 51105
712/252-0538
800/633-9104
606 W. 10th Ave.Milan, IL 61264309/787-1742
800/633-9114
Page 90 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
To view our Business Calendar online,
go to www.constructionequipmentguide.com.
AGC OF AMERICA (THE ASSOCIATED GENERAL CONTRACTORS OF AMERICA)WEBINAR: LEVERAGING TECHNOLOGY TO ENHANCE RISKMANAGEMENTDATE: OCTOBER 28, 2014TIME: 12 NOON ET/11 AM CT/ 9 AM PTGO BEYOND INSURANCE AND SAFETY TO A MORE HOLISTICVIEW OF RISK MANAGEMENT WITH TECHNOLOGY TO IDENTI-FY RISK FACTORS EARLY, WHICH EQUALS MORE OPPORTUNI-TY. MANAGING RISK IS NOT ONLY ABOUT HAVING INSURANCEPOLICIES AND PRACTICES IN PLACE. THIS WEBINAREXPLORES KEY RISK AREAS OF THE CONSTRUCTION BUSINESSWHERE IT HAS PROVEN VALUABLE TO LEVERAGE TECHNOLO-GY THAT SUPPORTS ENTERPRISE-WIDE RISK MANAGEMENTAPPROACHES. RISK AREAS INCLUDE:. OVERALL COMPANY PERFORMANCE. SPECIFIC JOB PERFORMANCE. SAFETY & TRAINING. PROJECT EXECUTION. INSURANCE COMPLIANCE. SUBCONTRACTOR MANAGEMENT. CONTENT MANAGEMENT. ENTERPRISE RISK MANAGEMENT IT IS IMPORTANT THAT CONTRACTORS LOOK BEYOND THEDEFENSIVE SIDE OF RISK AND LOOK AT AN OFFENSEAPPROACH, GAINING A COMPETITIVE EDGE AND KEEPING ANEYE ON OPPORTUNITY. WEBINAR REGISTRATIONAGC MEMBERS: FREE!NON-MEMBERS: [email protected]
AGC OF MINNESOTAMN CONSTRUCTION CREW – 2nd ANNUAL INFO EXPODATE & TIME: Tuesday, October 28th at 9:00 AM to 12:00 PMLOCATION: Carpenters Union Hall
710 Olive Street, Saint Paul, MNWebsite: www.northcoutnrycarptenter.orgPURPOSE: To provide access and information about trainingopportunities and upcoming projects in the construction indus-try. This event will focus on how people can get trained for spe-cific skills and trades even if it is preparing within their currenttrade. Contractors will also be available to discuss with atten-dees information about large projects that will be starting in thenext 1-2 years. If you have any questions or need additional information,please email: [email protected] you for your continual support in this outreach initiative!!!
AGC OF MINNESOTAHealth Care Reform Seminar: A Refresher Course and aPrimer on New Reporting Requirements – OCTOBER 30, 2014at the Radisson Hotel, Roseville, MNReady or not, health care reform is kicking into full gear foremployers in 2015. Now is the time to make sure your com-pany is ready to report. Join us for a “walk” through the newforms, with lots of opportunities to ask questions. Everyone inyour firm who has responsibility for insurance or employeebenefits should attend this seminar. Presenter: Monica Kelley, Esq., Gray Plant MootySeminar: 7:30 AM to 9:30 AMRegistration Fee: $25 per person (includes breakfast)Register: Online at www.agcmn.orgQuestions??? Contact Denise Woods, 651/796-2186 [email protected]
TRIMBLE DIMENSIONS 2014 IS THE PLACE TO BE IN NOVEMBER. REGISTER NOW!NOVEMBER 3 thru 5, 2014 LAS VEGAS, NEVADATrimble Dimensions User Conference 2014 is the must attendconference for industry professionals such as yourself.Haven’t attended in the past? Well, here’s what you’ve beenmissing! . Over 400 sessions lead by industry experts. Pavilion with the latest technology showcased. Unlimited networking opportunities. Peer-to-peer collaboration. Professional Development House (PDH). Hands-on training. Special events – plus more!Dimensions 2014 is the place to be in November. Discoverfirst-hand how you can transform the way you work by inte-grating advanced positioning technology, field and officeapplications and real time communications.For more information, contact: www.TrimbleDimensions.com
or Email: [email protected] OF MINNESOTACONSTRUCTION FINANCIAL MANAGEMENT CONFERENCENOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, NEVADAThe AGC/CFMA Construction Financial Management Conferencewill be held on November 5 – 7, 2014 in Las Vegas, Nevada.Get the latest information on: Construction Market Trends;Financial Accounting Standards Board; Surety, Financial, andCredit Markets, Change Order and Claims Management;Federal acquisition regulations; construction taxes; strategiesfor economic conditions; business real estate management;ethics and fraud. Register before September 5th: $780/AfterSeptember 5th: $860. Conference Details are available athttp://meetings.agc.org/agc _cfma.
Ohio Aggregates & Industrial Minerals Association (OAIMA)OAIMA 2014 Annual Meeting & Trade ShowHilton Columbus Hotel, Easton Town Center, Columbus, OhioDates: November 13-14, 2014Hotel Information: Hilton Columbus Easton3900 Chagrin DriveColumbus, Ohio 43219Telephone: 614/414-5000
AGC of MINNESOTASAVE THE DATES!!!. December 4th – Presidents/Holiday Reception, MinnesotaHistory Center, St. Paul. December 11th – AGC/MnDOT Grading and BaseTechnology ForumThe Minneapolis Boulevard Hotel, Brooklyn Center
. January 15th – 95th Annual meeting, Minneapolis MarriottSouthwest, MinnetonkaDETAILS of each will be available over the coming weeks!
CRC/ICHC 2014Crane & Rigging Conference / Industrial Crane & HoistConferenceDATES: December 3 – 4, 2014 LOCATION: Hilton Houston Nasa Clear Lake Hotel, Houston, TXThe event will be held adjacent to the Space Center Houstonand NASA’s Johnson Space Center. CRC/ICHC (Crane andRigging Conference/Industrial Crane and Hoist Conference) isan independent conference which offers education and net-working opportunities for safety and risk managers, crane andrigging supervisors, lift directors, project managers, and othersresponsible for managing crane and rigging operations in con-struction and heavy industry. More than just a lecture-styleconference, CRC/ICHC offers attendees opportunities for net-working in small groups, experiencing hands-on learning, andthe chance to visit vendors during exhibit hours.Who Attends? Typical attendees include contractors, engineer-ing firms, various construction user groups, unions, and craneand rigging professionals. The conference sessions are gearedfor safety and risk managers, crane and rigging supervisors,fleet managers, and small business owners. To submit a speaker proposal, go tohttps://maxcapmedia.wufoo.eu/forms/crcichc-2014call-for-speakers/. For more information on exhibiting, contact MarkBridger, [email protected].
AGC CONVENTION 96th Annual AGC Convention DATE: March 18-20, 2015PLACE: San Juan, Puerto RicoJoin us for the Convention!!! Business Suit OptionalNo one knows the future, but gaining a comprehensive view ofwhere you are, where you are going and where you need to becan only strengthen the educated decisions construction pro-fessionals have to make every day.Take the opportunity to step outside, analyze the direction yourorganization is heading, listen and compare that with otherconstruction professionals and take that perspective back toyour organization.As our premier event each year, the AGC Convention andTechnology & Construction Solutions Expo is the ideal opportu-nity to see everything AGC can do for you and your business.This year’s convention will include professional developmentsessions covering:. Workforce Development. Drones in Construction. Leadership. Risk Management. Quality Control. Marketing. Much More! For more information, please contact The Associated GeneralContractors of America. General Inquiries: 703/548-3118AGC Store Inquiries: 800/242-1767Convention.AGC.org
BusinessCalendar
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on
our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200
CLASSIFIEDS
AIR COMPRESSORS
Compressors
Airman PDS185, CFM
Compressor, Quiet, Efficient,
Durable, good condition, 1950
hours ................................$10,500.
480-695-0672
ASPHALT EQUIPMENT
Asphalt Cutters
Attachments InternationalASPHALT CUTTERSSEVERE SERVICE
HIGH SPEEDASPHALT CUTTER
Skid Steers,
TLB, Loaders,
Excavators
14 Models Available
''24-48 hour shipping''
SPECIAL PRICING!
Call 218-863-6444www.attachmentsintl.comwww.attachmentsusa.com
Asphalt - Misc.
2007 Dynapac PL2000, 80 in., front
loading planer, good condition,
3,000 hrs ........................$139,500.
847-437-8686
COMPACTION EQUIPMENT
Compaction - Misc.
2007 JCB Vibromax VM115D, 80'',
25,000 lb. w/ pad foot & dozer
blade, very good condition, 350
hours ................................$77,900.
2007 Dynapac CA134, 54'', 12,200
lb. single drum roller, excellent con-
dition, 300 hours ..............$43,500.
847-437-8686
CRANES
Boom Cranes
2011 National NBT45, 45 ton max
capacity, 142' of hydr. stick, 2 man
steel platform & test weights, good
condition..........................$369,900.
952-656-7107
EXCAVATORS
Hydraulic Excavators
2008 JCB JZ140, zero tail swingexcavator, includes bucket, goodcondition, 2,500 hours ......$73,500.
2007 JCB JS260, 60,000 lb. exca-vator includes bucket and quickcoupler, good condition, 1,375hours ..............................$139,900.
2005 JCB JS220, 50,000 lb. exca-vator includes bucket, quick couplerand thumb, good condition, 2,600hrs ....................................$88,900.
847-437-8686
2007 Doosan DX420, S/N 5119,Excavator with shear hydraulics,Good condition, 5,943 hours ..................................................$120,000.
440-439-4000
Mini Excavators
2006 JCB 8080, 18,000 lb. miniexcavator w/ dozer blade, includesbucket, good condition, 2,300 hours..........................................$43,900.
847-437-8686
GENERATORS & GEN SETS
Generators & Gen Sets
MMD AMSDG-25S, 20KWGenerator, Towable 3 phase Diesel25KW, good condition, 4,000 hours............................................$9,750.
480-695-0672
LOADERS
Backhoe Loaders
2008 JCB 3CX-15, 15 ft. backhoew/ extendable dipper, backhoebucket included, very good condi-tion, 1,700 hours ..............$55,000.
847-437-8686
2008 Yanmar CBL40, PTO, 3pt.hitch, backhoe, loader bucketattached w/ skid plate, great condi-tion, 216 hours ....................CALL.
641-628-2000
2006 Allmand TLB 6235, 4WD, 33HP, good condition, 1220 hours................................................$19,995.
480-695-0672
Skid Steer Loaders
2011 Terex TSV70 with cold weath-er cab, bucket, forks and grapplebucket for additional cost. Goodcondition, 195 hours ........$46,000.
440-439-4000
2012 JCB 260, Canopy, OpenROPS, 3-way Servo Controls, Tier 3Engine, Aux. Hydraulics (24gpm),Foot throttle, mechanical coupler, 2-speed trans., pictures available, 200hrs ....................................$36,000.
908-625-0697
2009 Takeuchi TL250, Cab/Heat/AC, Brand New Tracks, HydraulicQC, 80'' Tooth Bucket w/ new teeth,Like New, 2000 hrs ..........$48,000.
217-648-2307
2012 JCB 260, Cab, heat, 2-speed,foot throttle, general purpose buck-et, very good condition, 200 hours..........................................$33,000.
847-437-8686
Wheel Loaders
2008 JCB 426HT, 2.5 yd. wheelloader, 2.5 yd. bucket, good condi-tion, 1,000 hours ............$115,000.
847-437-8686
CAT IT938 Wheel Loader, S/NIBS00524, Fair condition, 18,240hours ................................$50,000.
440-439-4000
1996 CAT 966F, A/C, GP Bucket,Good condition..................$89,000.
913-371-3822
MATERIAL HANDLERS
Material Handlers
1999 Liebherr A932HD, S/N 5316,Material-Scrap Handler, Good con-dition, 17,968 hrs ............$125,000.
440-439-4000
TRAILERS
Dump Trailers
Felling 6x12 Dump Trailer, 6000lb. capacity, 5hp Honda engine,good condition ....................$6,500.
480-695-0672
Trailers - Misc.
Wylie Express 500 Water Trailer,500 gallon, 4hp Honda engine, tan-dem surge brakes, good condition............................................$5,700.
480-695-0672
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 91
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145
2006 Gehl 7810 Turbo, 115HP, 2260 Hrs, 3675 LbLift, 84” Bkt, 2 Speed..................................$30,900
Call Scharber & Sons 763-428-410722-23 PKNew Compact Excavators ....Starting at $41,000
Call Dan 612-306-4496 22-23 PK
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to:Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyersin the Midwest States.
For more information, call Construction Equipment Guide today at
800/523-2200
“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call
Summit Supply LLC888-888-1248 • [email protected] 21-22 TM
2004 Cat 320LC, 9350 Hrs, Hyd Cplr, Hyd Kit, 54” Bkt, 9’8”Stick, 33’ Reach, 48,000# .........................................$66,750
Call Steve Samosky • 262/373-2151 22 JM
1998 New Holland LX885, 1800 Hrs, 72” Tooth Bkt, 2200#Capactiy, 60 hp, 2 Speed, New Engine......................$11,400
Call Steve Samosky • 262/373-2151 22 JM
2005 Takeuchi TL140, 2970 Hrs, Cab, 81 HP, 76” Bkt, 18”Rubber Tracks ...........................................................$24,250
Call Steve Samosky • 262/373-2151 22 JM
2013 Takeuchi TB016, 300 Hrs, OROPS, Hyd Thumb,Coupler, Rubber, 7’9” Dig Depth, 3500# Capacity.....$28,950
Call Steve Samosky • 262/373-2151 22 JM
2012 Wacker WL50, 300 Hrs, Cab, A/C, Hyd Cplr, 75” .98Cy Bkt, 10,660 Lbs, Articulated.................................$60,420
Call Steve Samosky • 262/373-2151 22 JM
2012 Wacker 28Z3, 75 Hrs, OROPS, Coupler, Aux. Hyd,Rubber, 9’ Dig Depth, 5680 Lbs................................$32,710
Call Steve Samosky • 262/373-2151 22 JM
2007 Ditch Witch XT1600, 221 Hrs, Tracks at90%, Excellent Condition ................................$49,500
Call Tim 630-665-5600 22 JM
Used 2010 S630 Bobcat Skid Loader, 74.3HP Turbo-Diesel, 549 Hrs, Tires Like New, 2-Speed, High-Flow, Cabw/Heat/AC, Switchable Controls, Stereo, Power Bob-Tach,Deluxe Instrumentation ...............................................$33,800
Top Notch Equipment 763-398-0079 21-22 PK
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make and model.
Call McLaren 888-492-4230 22-23 DH
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction;tire protection; machine stability; self-cleaning; less grounddamage; fully rebuildable; interchangeable shoe types.
Call McLaren 888-492-4230 22-23 DH
MCLAREN SOLID CUSHION TIRES, for skid steers, back-hoes, telehandlers, wheel loaders - Nu-Air Semi-PneumaticTire Technology: no flats ever; soft, air-cushioned ride; last3 to 5 times longer than regular pneumatic tires; rimsincluded; same day shipping; various tire sizes available.
Call McLaren 888-492-4230 22-23 DH
2006 Ditch Witch FX60 Vacuum Excavator, 800 galspoils capacity, 200 gal water tank, 4 cylinder Cumminsengine, 3251 hours ..............................................$32,500
Call Tania 614-443-9751 x237 21-22 EB
2008 70 Ton Liddell Drop Side Deck Lowboy Tri-AxleTrailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger withMotor ......................................................................$210,000
Sun Piledriving Equipment 302-539-7187 21-22 BB
2004 Cedarapids 452, Front Wheel Assist TopconElectric 20’ Screed, 5546 Hrs..........................$87,500
Call 605-336-0411 21-22 PK
2008 Cat 305C CR, Hyd. Thumb, Blade, 2300 hrs......................................................................$36,500
Courts Machinery • 507/678-2752 22-23 PK
Page 92 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
DSC Dredge Barracuda Class Features Swing-Ladder DesignThe DSC Dredge barracuda class
dredge features a swinging-ladderdesign and is easily transportable,making it ideal for navigational,recreational or restorative projectssuch as waterway maintenance andlake revitalization. Offering theoption of two front-swing winches,the barracuda class is a two-in-onedredge that easily converts from aswing ladder dredge to a convention-al dredge without sacrificing portabil-ity. Available in either diesel or elec-tric power, the barracuda class dis-charge sizes range from 10 to 18 in.(25 to 45 cm).
Other barracuda class standard fea-tures include a user-friendly controlpanel with a PLC-based operatingsystem and a power up/down spudsystem with API-rated winch drumsfor proper cable storage. A rear-kick-ing spud for dredge positioning andadvancement also comes standard.Optional spud traveling carriages ortwo stern kicker spuds are availableupon request.
In addition to these premium fea-tures that maximize operational effi-ciency and longevity, every barracu-
da class dredge customer benefitsfrom DSC Dredge’s ability to cus-tomize each standard productionmodel to fit exact applications andproduction requirements. These cus-tomizations include larger or smallerdredge size, extended digging depths,production instrumentation and GPSdredging systems.
The company also provides cus-tomers throughout the world withintensive and professional onsitecommissioning and operational train-ing ensuring rapid deployment whileDSC Dredge’s automation skills,experienced service capabilities andparts availability have established thecompany as a global leader in high-performance dredging technologyand equipment.
DSC Dredge LLC operates fromthree major manufacturing facilitieslocated in Reserve, La., Poplarville,Miss., and Greenbush, Mich.
For more information, visitwww.dscdredge.com.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The barracuda class is a two-in-one dredge that easily converts from a swing ladder dredge toa conventional dredge without sacrificing portability.
The Easy Way To Advertise YourEquipment Valued At Less Than $1 MillionRun In Two Consecutive Issues For $95
2010 Gehl V270 Vertical Lift Skid Loader, Like New,One Owner, 785 Hrs, OROPS, ISO Joystick Controls,74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard,Super Nice Machine! .......................................$29,900
Call George 219-696-8911 22 JM
1991 John Deere 300D, S/N 775834, Open ROPS....................................................................$19,000Call 502/456-4050 Ask for Lynell or Albert 21-22 EB
1981 Grove Rt 755, 55 Ton S/N # 49225,Cummins Rebuilt, 110’ Main Boom, 32’ Jib,
Auxilliary Hoist, 5 Sheave Block, Cleveland OhioCall Andy 216-316-1511 21-22 EB
1993 Grove Rt 422,22 Ton S/N # 78334,Cummins 4 Cyl12,100 Hours, 3Speed Transmission,27’-70’ Main Boom,25’-43’ Jib, AuxilliaryHoist,17.5 X 25 Tires,Ball, New Rotec,Boom Scope CylinderRebuilt, Fresh GrovePaint, Cleveland Ohio
Call Andy 216-316-1511
21-22 EB
2011 Case 580SN, s/n JJGN58SNKAC536021,2480 Hours, Cab w/Heat & AC, Extenda-hoe, RideControl, Two Lever, 4 in 1 Bucket. Aux Hyds, 12”,18”& 24” Buckets..............................................$59,900
Call Mark 630-739-7770 22 JM
2013 Case SR250, s/n JAFSR250JCM443037,310 Hrs, Cab w/Heat, Two Speed, Hyd Coupler,78” Bkt, 14 x 17.5 Tires ..............................$43,500
Call Steve 630-878-8765 22 JM
2003 Takeuchi TL130, s/n 21301340, 2650 Hours,Cab w/Heat & AC, NEW TRACKS, 67” SmoothBucket.........................................................$19,200
Call Ray 630-878-8810 22 JM
1997 Volvo A30C, s/n A30CV2688, 11,070 Hrs, 4Spray Heads, Hose Reel w/Nozzle, Hyd. DrivenWater Pump, Volvo TD103KBE Engine, 289 Adv.Horsepower, 1-2-3-D Speed, in Cab Controls, A/C......................................................................$75,000
Call David 219-696-5680 22 JM
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 93
LOOKING TO BUY USED CATERPILLARWHEEL LOADERS 920, 926, 930, 936,938F/G, 950B/C/E/F, 966C/D/E/F/H,980C/F AND 988B. PLEASE SEND MEPICTURES, SERIAL NUMBER, CONDITION, LOCATION AND FINALOFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––PM WB60 + IMT 24562 | UNMOUNTEDKNUCKLE CRANECONTACT: MOHSENPHONE: 966566972242EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 966,D,E,F; 970F; 972F,G; 980C,F;D8R; D9L, D9N; D9R; 14G,H | CATLOADER: 930; 936E; 950C,B,E;966C,D,E,F; 970F; 972F,G; 980C,F | CAT DOZER: D8R; D9L; D9N; D9R |GRADER: 14G,H.CONTACT: MOSTAFA ELEMAMPHONE: 281-581-2111FAX: 281-581-2117EMAIL:[email protected]––––––––––––––––––––––––––––––––BACK HOLDCONTACT: CARL CUMMINGSPHONE: 912 384-7120EMAIL: [email protected]––––––––––––––––––––––––––––––––TAILGATE FOR A TA30 GEN 7 HAULTRUCK | TAILGATECONTACT: CAREN BUNCEPHONE: 860-824-5536FAX: 860-824-4139EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADERS CAT 950B, CAT950E. MACHINES MUST BE LOCATED INUS/AUSTRALIA OR CANADA.CONTACT: IKRAM ULLAH KHANPHONE: +92-333-5555-360EMAIL: [email protected]––––––––––––––––––––––––––––––––DRESSER BUCKET, QUICK COUPLER,ATTACHMENTS FOR IH 530CONTACT: HARRYPHONE: 905 403 0788EMAIL: [email protected]––––––––––––––––––––––––––––––––SCHWING BOOM PUMPS | SCHWINGCONCRETE PUMP BOOMS 32M -39MMOUNTED ON MACK TRUCKS 94 &NEWERCONTACT: WILLIAM CROSSPHONE: 407 595 8221FAX: 407 843 0136EMAIL:[email protected]––––––––––––––––––––––––––––––––USED CATERPILLAR WHEEL EXCAVA-TOR - CAT 140M CAT M316D 329DLBETWEEN 2012 TO 2014 I CAN GIVETHE MOST MONEY USD $250,000CONTACT: IBRAHIMEMAIL: [email protected]––––––––––––––––––––––––––––––––LANDFILL COMPACTORSCONTACT: MARK OR JOHNPHONE: 519-686-1123EMAIL:[email protected]––––––––––––––––––––––––––––––––
EAGLE 1000CC OR 1200CC PORTABLECRUSHING PLANTCONTACT: JOEPHONE: 724 944-5569EMAIL: [email protected]––––––––––––––––––––––––––––––––USED GRADALL 4100 OR EQUIVALENT2005 OR NEWER - CALL FOR SPECSCONTACT: BRANCH COUNTY ROADCOMMISSIONPHONE: 517-278-2022FAX: 517-278-6126EMAIL: [email protected]––––––––––––––––––––––––––––––––I NEED TO BUY CUMMINS KT19GENSET.CONTACT: IKRAM KHANPHONE: +92-333-555-5360EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR WELDING TRUCKCONTACT: JOSEPHONE: 347 3516853EMAIL:[email protected]––––––––––––––––––––––––––––––––USED KUBOTA 92SV SKID STEER INGOOD SHAPECONTACT: GLENN, SIEVE CONSTRUC-TIONPHONE: 507-227-3780FAX: 507-736-2199EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY CATERPILLARWHEEL LOADER 930 BETWEEN 1980TO 1984CONTACT: MOHAMEDPHONE: 253-232-6772EMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT OF ALL SORTS, NOTINCLUDING TRUCKS AND VEHICLES.WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE. CALL OR EMAIL.CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––PILE HAMMERS | LOOKING TO BUYCLAMSHELL BUCKETS, GRAPPLES,PILE HAMMERS, WINCHES, HOISTS,CRANES & HOOK BLOCKS.CONTACT: GREGPHONE: 724-228-5560EMAIL: [email protected]––––––––––––––––––––––––––––––––TERRAMITE T5C USED 1990 THRU 2000,PLEASE CONTACT E MAIL ONLYCONTACT: C.B. BARKERPHONE: 910 564 4931FAX: NONEEMAIL: [email protected]––––––––––––––––––––––––––––––––
PILE HAMMERS | LOOKING FOR USEDVIBRATORY AND DIESEL HAMMERSAPE _ ICE _ J&MCONTACT: WILLIEEMAIL: [email protected]––––––––––––––––––––––––––––––––IT DD70, IR DD25, AND DEERE 410 2004AND UP | IR DD70, IR DD25, AND DEERE410 2004 AND UP BOBCAT S185 2010BOBCAT 325 BOBCAT 323 KOMATSUDOZERS PLEASE EMAIL ME ALL INFOCONTACT: MANSOOR MOLAIPHONE: +16303799175EMAIL:[email protected]––––––––––––––––––––––––––––––––WE WANT TO BUY CATERPILLAR DOZERS D9N & D9R WITHRIPPERS.PLEASE OFFER US & KINDLYSEND US DETAILS, PICTURES & OFFERGOOD PRICE.CONTACT: FAIZ KHANPHONE: +92-333-3298751EMAIL:[email protected]––––––––––––––––––––––––––––––––WE WANT TO BUY CATERPILLARWHEEL LOADERS 950B, 950E, 966E,966F.PLEASE OFFER US & KINDLYSEND ME DETAILS, PICTURES & OFFERGOOD PRICE.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––DROP DECK TRAILER | 53X102 DROPDECK AIR RIDE TRAILERCONTACT: JOHN MICHALKOPHONE: 262 889 1372EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACTOR CAB | ENCLOSED USED CABTO FIT IHC 684.CONTACT: RONPHONE: 419-565-5429EMAIL: [email protected]––––––––––––––––––––––––––––––––VANAIR 80 VIPER | PORTABLE AIR 80CFMCONTACT: ANDYPHONE: 2316725139EMAIL: [email protected]––––––––––––––––––––––––––––––––COMMERCIAL LAWN MOWER | UNDER200 HOURS AND A 52 IN SIZE DECKNEEDS TO BE A 2012 OR 2013CONTACT: [email protected]: 6315862225EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACHOEEMAIL: [email protected]––––––––––––––––––––––––––––––––INTERNATIONAL TRI AXLE DUMPPAYSTAR 5000 5600 OR 5900 FROMCONTRACTOR 400 HP OR MORE | TRIAXLE DUMP CLEAN 400 HP OR MOREFROM CONTRACTOR.CONTACT: KEVINPHONE: 856-692-0027EMAIL: [email protected]––––––––––––––––––––––––––––––––HYUNDAI 4503 | LINDI FINAL DRIVECONTACT: WILLIAM RENAUD JRPHONE: 207-384-5111FAX: 207-384-4809EMAIL:[email protected]––––––––––––––––––––––––––––––––
WE WANT TO BUY CAT WHEELLOADER 920, 926E, 936E, 950B, 950E,966D, 966E, 966F, 970F, 980C, 980F, 988BAND 988F. IF YOU HAVE ANY FOR SALEPLEASE EMAIL US PHOTOS ANDDETAILS.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING TO BUY CAT MOTORGRADER 12G, 140G, 14G, AND 140H IFYOU HAVE ANY FOR SALE PLEASEEMAIL PHOTOS AND DETAILS.CONTACT: STEVEPHONE: 713-659-0593FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––FIELD STRIPING MACHINE | LOOKINGFOR A AIRLESS FIELD STRIPINGMACHINECONTACT: RICKPHONE: 518 369 3296FAX: 518 371 0296EMAIL: [email protected]––––––––––––––––––––––––––––––––WANT TO BUY NICE CRAWLERLOADER. LOCATED IN WEST POINT CONTACT: CHARLES TRAMMELLPHONE: 706 645 6704 OR 706 501 9457EMAIL:[email protected]––––––––––––––––––––––––––––––––MINI EXCAVATOR 12000-18000# | I NEED TO PURCHASE A MINI EXCAVA-TOR FOR MY GROWING BUSINESS.CONTACT: ADAMPHONE: 518-496-5020EMAIL: [email protected]––––––––––––––––––––––––––––––––OLDER CAT 320 OR CAT 215, CAT 225 |SEEKING AN OLDER MODEL CAT 320 INTHE MID 1990 RANGE OR CAT 215/CAT225 OLD BUT IN OPERATING CONDI-TION. ONLY SEEKING ONE UNIT. CON-TACT ME VIA EMAIL ONLY WITH PHO-TOGRAPHS AND CONDITION INFORMA-TION.CONTACT: JEFF LAWSONEMAIL: [email protected]––––––––––––––––––––––––––––––––USED TIGER MOWEREMAIL: [email protected]––––––––––––––––––––––––––––––––AMCO VEBA 105 3S 5TON | NEW ORLIKE NEW CONDITION. TO BE MOUNTED ON A WORKBOAT.CONTACT: ROGER APPLEWHITEPHONE: 228-217-4135EMAIL: [email protected]––––––––––––––––––––––––––––––––LOADER FOR MASSEY 390 4WD | SEC-OND HAND LOADER TO FIT MASSEY390 4WDCONTACT: RICHARD FITZGERALDPHONE: 00353860437770EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT D6R AND D7R 9903 | WE ARELOOKING FOR D6R AND D7R 1999-2002.RUNNING CONDITION WITH PICTURES. CONTACT: MICHAELEMAIL: [email protected]––––––––––––––––––––––––––––––––
DYNAPAC CA12 AXLE | NEED REARAXLE FOR DYNAPAC CA12. WOULDPURCHASE ENTIRE NON-RUNNINGMACHINE.CONTACT: NEILPHONE: 320-763-4491EMAIL: [email protected]––––––––––––––––––––––––––––––––D9R | WE LOOKING FOR BULLDOZERD9R AND D9N MANUAL FROM 1988 UPTO 1997 WITH RIPPER SINGLE SHANKCONTACT: OUFIPHONE: 966530185141FAX: 9660127512024EMAIL:[email protected]––––––––––––––––––––––––––––––––SS RIPPER FOR CAT D9N OR D9R. THERIPPER CAN BE USED OR REBUILT IFWELL PRICED.CONTACT: TIAGO DONATOPHONE: (305) 909-9743EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADERS | WANTED TOBUY CAT WHEEL LOADER 936E, 950B,950E, 966D, 966F, 970F, 988B, AND 988FIN RUNNING OR NON RUNNING CONDI-TION IF YOU HAVE FOR SALE PLEASEEMAIL ME PHOTOS AND DETAILS.CONTACT: STEVEPHONE: 713-659-0593FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––CASE BACKHOE LOADER 580SK, 580L,580M AND 580SM | I AM LOOKING TOBUY CASE BACKHOE 580SK, 580SL,580L, 580SL, 580M AND 580SM IN ANYCONDITION IF YOU HAVE FOR SALEPLEASE CONTACT ME.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––PAVER | LOOKING FOR BLAW-KNOX PF5510 OR PF3200, THE CLOSER TOWASHINGTON STATE, THE BETTER. CONTACT: SANTIAGO SCARZELLAPHONE: 3055064263EMAIL: [email protected]––––––––––––––––––––––––––––––––TELESCOPIC FORKLIFT | 4-6 TON TELESCOPIC FORKLIFT DIESEL 12-14M1999-2002 GOOD CONDITIONCONTACT: WILFRED OBENGSACKEYPHONE: 233264495065EMAIL:[email protected]––––––––––––––––––––––––––––––––TERRAMITE BACKHOE, USED | TER-RAMITE BACKHOE USED 4X4 DIESELOR GAS. 2003-4-6CONTACT: ALANPHONE: 903-681-2064EMAIL: [email protected]––––––––––––––––––––––––––––––––DIESEL TANK FOR TOWABLE INGER-SOLL RAND AIR COMPRESSOR | THISIS AN OLD, DETROIT MADE PORTABLEINDUSTRIAL AIR COMPRESSOR THATYOU TOW TO WORK SITE. NEEDREPLACEMENT DIESEL GAS TANK ANDCOMPANY DOES NOT STOCK PARTSTHIS OLD.CONTACT: RJPHONE: 801-597-7314EMAIL: [email protected]––––––––––––––––––––––––––––––––
4400 GPM POSITIVE DISPLACEMENTPUMP | SECOND HAND POSITIVE DIS-PLACEMENT PUMP CAPACITY: 3300 -4400 GPM CAPACITY: 750 - 1000 M3/HRPRESSURE: 16 - 20 BAR PRESSURE:230 - 290 PSI TEMPERATURE: 60 CTEMPERATURE: 140 F VISCOSITY OFMEDIUM: 2115 CP MEDIUM: CRUDE OILLOCATION OF PLANT: MALAYSIACONTACT: SYAZWAN ELIASEMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 950B, CAT 950E | I AM LOOKINGFOR CAT WHEEL LOADERS 950E AND950B, PLEASE FEEL FREE TO CON-TACT ME, IF YOU HAVE AVAILABLE ORANY UP COMING UNIT. REGARDSROYAL MACHINERY TRADERSCONTACT: ROYAL TRADERS USA.EMAIL:[email protected]––––––––––––––––––––––––––––––––NATIONAL CRANE BOOM SECTIONS |LOOKING FOR TELESCOPIC BOOMSECTIONS FOR A 880 SERIES NATIONAL CRANECONTACT: MIKE ACHTORPHONE: 847-782-0672FAX: 847-782-0673EMAIL:[email protected]––––––––––––––––––––––––––––––––20 FEET TRAILER WITH 10 TIRESCONTACT: VIJAYPHONE: 9444411691EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLARS DOZER D7H AND G |WANTED GOOD USED CATERPILLARSBULLDOZER D7H AND D7GCONTACT: GABRIEL FOTSOPHONE: 2027101655EMAIL: [email protected]––––––––––––––––––––––––––––––––544G MANUAL PEMBERTON QUICKCOUPLER | 544G / E MANUAL QUICKCOUPLER 544G 20.5 X 25 WHEELS ANDTIRES, WILL TRADE FORESTRY TIRESAND WHEELS.CONTACT: MICKPHONE: 352-400-5026EMAIL: [email protected]––––––––––––––––––––––––––––––––BANDIT254/WOODCHUCK | PREFERDIESEL AND GOOD WORKING CONDITIONCONTACT: CELIAPHONE: 1(806)665-4274FAX: 1(806)665-4275EMAIL:[email protected]––––––––––––––––––––––––––––––––KW DUMP TRUCKCONTACT: JOEL VANDER HEIDENPHONE: 563-357-6273EMAIL: [email protected]––––––––––––––––––––––––––––––––MUSTANG LOADER BUCKET | I AMLOOKING FOR A USED BUCKET WITHTEETH FOR MY 2003 MUSTANG MTL20LOADERCONTACT: MIKE IPSANPHONE: 703-675-3375EMAIL: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:
www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted
Page 94 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERSwww.lyonauction.com315-633-2944�
• Bangor, MESat., October 25, 2014For: Late Model Construction &Rental Fleet Equipment
• Parkersburg, WVFri., October 31, 2014For: Late Model Oilfield Equipment
• Columbus (Delaware), OhioSat., November 1, 2014For: Late Model ConstructionEquipment & more
• Brooklyn, NYTues., November 4, 2014For: Industrial Equipment. Part 1 of2 day sale.
• Saginaw, MIWed., November 5, 2014For: Land Clearing Equipment
• Wilkes Barre, PAWed., November 5, 2014For: Industrial Equipment. Part 2 of2 day sale.
• Port Huron, MIThurs., November 6, 2014For: Major Job Completion
• Rochester, NYFri., November 7, 2014For: Trucking Company Liquidation
• Canastota, NYSat., November 8, 2014For: Late Model ConstructionEquipment & more
• Cato (Syracuse), NYSun., November 9, 2014For: Buses and Light ConstructionEquipment
• Houston, TXTues., November 11, 2014For: Rentals! Late ModelConstruction & Support Equipment& more
• Gary, INFri., November 14, 2014For: Complete Liquidation Concrete& General Contractor
• Boston, MASat., November 15, 2014For: Late Model Snow Removal &Construction Equipment
• Waterloo, IAThurs., November 20, 2014For: Complete LiquidationEarthmoving Equipment
• Manassas, VAFri., November 21, 2014For: Late Model ConstructionEquipment and more
• Dallas, TXTues., December 2, 2014For: Late & Great Rental FleetConstruction Equipment
• Atlanta, GAWed., December 3, 2014For: Construction Equipment,Support & Trucks
• Las Vegas, NVSat., December 6, 2014For: Large Rental Return Auction
• Odessa, TXTues., December 9, 2014For: Rental Fleet ConstructionEquipment & more
• Atlantic City, NJSat., December 20, 2014For: Late Model Rental Returns
• Albany, NYSat., December 27, 2014For: Rental Fleet ConstructionEquipment & more
• Kissimmee, FLJanuary 31 – February 8, 2015For: 22nd Annual ConstructionEquipment, Trucks & more
RITCHIE BROS. AUCTIONEERS
www.rbauction.com402-421-2631
• North East, MDOctober 28, 2014
• Hobbs, NMOctober 30, 2014
• Pittsburgh, PANovember 6, 2014
• Albuquerque, NMNovember 7, 2014
• Champaign, ILNovember 11, 2014
• Houston, TXNovember 12-13, 2014
• Boise, IDNovember 14, 2014
• New Braunfels, TXNovember 14, 2014
• Phoenix, AZNovember 18, 2014
• Tipton, CANovember 19, 2014
• East Brunswick, NJNovember 20, 2014
• Williston, NDNovember 20, 2014
• Las Vegas, NVNovember 21, 2014
• Atlanta, GADecember 2, 2014
• Fort Worth, TXDecember 3-4, 2014
• Nashville, TNDecember 9, 2014
BAR NONE AUCTION
www.barnoneauction.com866-372-1700�
• Portland, ORThurs., November 13, 2014For: Public Heavy EquipmentAuction
BIG IRON
www.bigiron.com800-937-3558�
• ONLINE ONLYOctober 29, 2014
• ONLINE ONLYNovember 5, 2014
• ONLINE ONLYNovember 12, 2014
• ONLINE ONLYNovember 19, 2014
• ONLINE ONLYNovember 26, 2014
BLACKMON AUCTIONS, INC.
www.blackmonauctions.com501-352-4703
• Little Rock, AROctober 29-31, 2014For: October Contractor’s Auction
• Wilburton, OKWed., November 5, 2014For: Booth Environmental Auction
• Conway, ARNovember 6-7, 2014For: Estate Auction
• Van Buren, ARTues., November 11, 2014For: Arklahoma Pipeline Auction
• Van Buren, ARThurs., November 13, 2014For: Cockrum Welding &Fabrication
• Oxford, MSTues., November 18, 2014For: Deep South Sand & Gravel
• Ozark, ARThurs., December 4, 2014For: One-Owner Auction
CAT AUCTION SERVICES
www.catauctions.com866-750-9432�
• Pittsburgh, PAThurs., October 30, 2014For: Construction Equipment
• Las Vegas, NVFri., November 14, 2014For: Construction Equipment
• Oklahoma City, OKTues., November 18, 2014For: Construction Equipment
• ONLINE ONLYWed., November 19, 2014For: eQuipment Yard
• Warner, NHFri., November 21, 2014For: Construction Equipment
• Denver, COThurs., December 4, 2014For: Construction Equipment
• Minneapolis, MNTues., December 9, 2014For: Construction Equipment
• Lancaster, PAThurs., December 11, 2014For: Construction Equipment
• ONLINE ONLYWed., December 17, 2014For: eQuipment Yard
• Kissimmee, FLFri., February 13, 2015For: Construction Equipment
COCHRAN AUCTIONS
www.cochranauctions.com�301-739-0538
• Washington County, MDNovember 6-8, 2014For: 3 Day Fall ContractorsRegional Equipment/Truck & TrailerAuction
DAVIS AUCTIONS
www.davisauctionsinc.com�203-758-4087
• Prospect, CTSat., December 13, 2014For: Construction Equipment
EQUIFY AUCTIONS, LLC
www.equifyauctions.com�888-535-8218
• Wills Point, TXNovember 6-7, 2014For: 2 Day Auction Event
GUINN AUCTION COMPANY
www.guinnauctions.com�337-824-0422
• Jennings, LASat., November 1, 2014For: Heavy Construction Equipment& Oilfield Trucks
HILCO INDUSTRIAL, LLC
www.hilcoind.com�877-37-HILCO
• ONLINE ONLYWed., November 5, 2014For: City of Detroit Major MunicipalAuction
HUNYADY AUCTION COMPANY
www.hunyady.com�800-233-6898
• Livingston, NJWed., November 12, 2014For: Complete Liquidation JogiConstruction, Inc.
I.R.A.Y. AUCTION
www.iraymn.com�320-968-7230
• Foley, MNFri., December 5, 2014For: Heavy Construction Equipment,Truck & Trailer
IRON PLANET AUCTIONS
www.ironplanet.com�888-433-5426
ONLINE AUCTIONSGo to www.ironplanet.com to viewthe complete auction schedules,inspection reports and to place yourbid!
• ONLINE ONLYOctober 29, 2014
• ONLINE ONLYOctober 30, 2014
• ONLINE ONLYNovember 19, 2014
JEFF MARTIN
AUCTIONEERS, INC.
www.jeffmartinauctioneers.com�601-450-6200
• ONLINE ONLYWed., October 29, 2014For: Public Surplus LiquidationAuction
• Brooklyn, MSNovember 21-22, 2014For: 2 Day Fall Public Auction
J.J. KANE AUCTIONEERS
www.jjkane.com�855-GO2-KANE
• Boston, MAThurs., October 25, 2014For: Heavy Equipment
• Kansas City, MOThurs., November 6, 2014For: Heavy Equipment
• Philadelphia, PAThurs., November 8, 2014For: Heavy Equipment
• Charlotte, NCSat., November 13, 2014For: Heavy Equipment
• Portland, ORThurs., November 20, 2014For: Heavy Equipment
• Rome, NYSat., November 22, 2014For: Heavy Equipment
• Lansing, MIThurs., December 6, 2014
• Atlanta, GAThurs., December 11, 2014
• West Palm Beach, FLSat., December 13, 2014
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com�864-947-7888
• ONLINE ONLYOctober 20 - 27, 2014For: Machine Shop Equipment,Pumps, Tools, Presses & more
• Princeton, WVWed., October 29, 2014For: Construction Equipment,Trucks, Trailers & more
• Kingsport, TNWed., November 12, 2014For: Large Dismantled Machines &Major Machine Components
• Pelzer, SCFri., November 14, 2014For: Const/Farm Equipment, Trucks,Trailers & more
• Lenoir, NCWed., November 19, 2014For: Construction Equipment &Related items
MOTLEY’S AUCTION GROUP
www.motleys.com�804-232-3300
• Chesapeake, VATues., October 28, 2014For: Construction Equipment &Trucks
• Richmond, VAThurs., November 13, 2014For: Construction Equipment &Trucks
NITKE AUCTIONS
www.nitkeauctions.com�715-693-4447
• Wausau, WIOctober 24 - 25, 2014For: 49th Annual ContractorsAuction
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.com�860-642-4200
• Newark, NJThurs., October 30, 2014For: Heavy Construction Equipment& more
• South Windsor, CTFri., November 7, 2014For: Complete Dispersal – FolsomConstruction, LLC
• South Windsor, CTSat., November 8, 2014For: Complete Dispersal – FolsomJ&H Slater Construction Co.
• Plaistow, NHNovember 14-15, 2014For: Complete Dispersal – S&RConstruction Enterprises
• Bristol, CTFri., December 5, 2014For: Major Equipment Liquidation
• North Franklin, CTDecember 19-20, 2014For: Major Public Auction – AreaContractors & Equipment Dealers
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
• ONLINE ONLY
Thurs., October 30, 2014For: Forestry & ConstructionEquipment
• ONLINE ONLY
Thurs., November 6, 2014For: Construction Equipment
• ONLINE ONLY
Tues., November 18, 2014For: Truck & Trailer Auction
• ONLINE ONLY
Thurs., November 20, 2014For: Construction Equipment
SCOTT PERRY & CO.
www.scottperryco.com
716-283-7653
• Savona, NY
Wed., October 29, 2014For: NYS Dept. of EnvironmentalConservation
• North Syracuse, NY
Thurs., October 30, 2014For: NYS Dept. of Transportation
• Pittsford, NY
Wed., November 5, 2014For: NYS Dept. of Transportation
• Batavia, NY
Thurs., November 6, 2014For: NYS Police – Troop “A”
• Canandaigua, NY
Thurs., November 6, 2014For: NYS Police – Troop “E”
• Newark, NY
Fri., November 7, 2014For: NYS Office for People WithDevelopmental Disabilities
SHETRON AUCTIONS
www.shetronequipment.com
�717-532-8828
• Shippensburg, PA
Fri., October 31, 2014For: Construction & FarmEquipment
• Shippensburg, PA
Fri., December 19, 2014For: Construction & FarmEquipment
STOREY’S
www.storeys.ca
519-641-2844
• London, ON
November 4-5, 2014For: 2 Day Major Public HeavyEquipment, Trucks, Scrap, RealEstate, etc.
WAYNE PIKE
AUCTION COMPANY
www.waynepikeauction.com
763-389-5700
• Princeton, MN
Sat., December 6, 2014For: Heavy Equipment
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com
�419-865-3990
• Kissimmee, FL
February 9-16, 2015For: 41st Annual – 7 day Auction
AuctionsComingTo view information on upcoming auctions visit our
Auction Calendar at www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 95
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com
Sales Managers & Auctioneers, Inc.
ALEX
LYON & SON
SAT., NOVEMBER 1 @ 9:30 AM WED., NOVEMBER 5 @ 9:30 AM
NOTE: This sale contains late model, low houred rental fleet equipment thatis the exception, not the norm.
HILITES: 12 CRAWLER TRACTORS: 2009-(2) 2008 Cat D8T, 2005 CatD6RXW-II, 2005 Cat D6RXL, 2007 Cat D6NLGP, 2012 Cat D3KXL, CatD3GXL, 2010 Case 850L, 2006 Case 450CT, 2007 JD 850JLT, NHDC80LGP, 14 HYDRAULIC EXCAVATORS: (2) 2013 Demo JD245GLC, 2012 Cat 320EL, 2012 Cat 316EL, Cat 315CL, 2008 CaseCX160B, 2011 Case CX50B, 2013 Case CX36B, (4) 2014 JCB 8018CTS,2006 Hyundai Robex 450LC-7, 2005 Hitachi ZX450LC, 2 EXCAVATORTHUMBS: (2) New Tomahawk, 4 ARTICULATED HAUL TRUCKS: (2) 2006 Case 335B, 2005 Case330B, 2006 JD 250D, RUBBER TIRED LOADER: 2013 JD 544K (like new), 2 MOTOR GRADERS:2012 JD 770G, Huber M-850A (GPS), CRAWLER LOADER: 2008 JD 655C-II, 6 TRACTOR LOADERBACKHOES: 2009 Cat 430E (4x4), 2012 Cat 416E, 2012 JD 310K (4x4), JD 310G (4x4), 2007 Case 580M-III (4x4), 2007 Case 580M (4x4), VIBRATORY ROLLER: 2012 Bomag BW211D-40, 5 RUBBERTRACKED SKID STEERS: Demo Cat 289DXPS, 2012 Case TV380, 2006 Case 450CT, 2010 JD CT333D,2006 Bobcat T250, 4 SKID STEERS: Unused Case SR220, 2012 Case SR220, Unused Case SV185, 2012Case SR150, 4 TELESCOPIC FORKLIFTS: 2007 JCB 520, (2) Skytrak (4x4), JD 4500, 5 BOOMLIFTS: (2) 2007 JLG 860SJ (4x4), (2) 2006 Genie Z80/60 (4x4), JLG E300AJ, 8 GENERATORS: (8) IRS60 60KW, 3 AGRICULTURAL TRACTORS: JD 4040 (4x4), JD 3640 (4x4), JD 3140 (4x4), BOOMTRUCK: 2006 Int’l 4200 (18T), SERVICE TRUCK: 2007 Ford F750XL, MOTOR HOME: 2004Fleetwood 35ft. Bounder, 4 WALKING FLOOR TRAILERS: 2005 Mac 48ft. (t/a), (2) 2001-1997 J&J48ft. (t/a), 10 DUMP TRAILERS: 1997-(2) 1995-(4) 1994-(2) 1993 Trailstar (tri.), 1995 East (tri), 8 SNOWEQUIPMENT: Master Craft Welding SP-144WL 12ft. Snow Pusher, Master Craft Welding SP-120WL 10ft.Snow Pusher, Master Craft Welding SP-120SS 10ft. Snow Pusher, Master Craft Welding SP-96SS 8ft. SnowPusher, Master Craft Welding SP-78SS 6ft. 6in. Snow Pusher, Master Craft Welding SP-72SS 6ft. SnowPusher, GOLF CART: Ez-Go, 3 RECREATIONAL VEHICLES: (2) New 110 CC 4 Wheeler, New ElecPower Wheel, TIRES: (4) New Unused Michelin 23.5R25 Tires, 2 PRESSURE WASHERS: (2) New EasyKleen, ATTACHMENTS: Skid Steer: (2) New Tomahawk 72in. Rock Bucket, (2) New Tomahawk 78in.Snow & Mulch Bucket, (2) New Tomahawk 72in. Smooth Bucket, (2) New Tomahawk 66in. Brush Grapple(1 cylinder), (2) New Tomahawk 66in. Smooth Bucket, (2) New Tomahawk 66in Grapple Bucket (1 cylin-der), (2) New Tomahawk Stump Bucket, (6) New Tomahawk 42in. Fork Frame, (4) New Tomahawk HD HaySpear, (10) New Tomahawk Quick Attach Mount Plate, NEW SUPPORT EQUIPMENT: New ReadingATBV96 Aluminum Diamond Plate Tool Box, New Reading ATBV89 Aluminum Diamond Plate Tool Box,New Reading ATBV88 Aluminum Diamond Plate Tool Box, New Reading ATBV49 Aluminum DiamondPlate Tool Box, (2) New Mustang LF88 Plate Compactor, (3) New Mustang MP4800 2in. Submersible Pump,(2) New Mustang CV3500 Concrete Vibrator, (4) New 4 Pack 10,000lb Ratchet Straps, (8) New 3pc. 14in.Premium Diamond Blades, (2) New Huskie 11218 SDS Hammer Drill, (3) New Stiff Neck Pintle Hitch, (2)New 1in. Drive Air Impact Wrench, (3) New 1/2in. Drve Air Impact Wrench Kit, (6) New 2in.x50in.Discharge Water Hose, (4) New Auto Darkening Welding Helmet, (2) New 3/4in.x50in. Automatic Air HoseReel.
Address: 935 U.S. 23 North Delaware, OH 43015.
DIRECTIONS: From the North/South: take I-71 to Rte. 36 & US 37 Exit, proceed West on Rtes. 36 & 37for 9 miles to Delaware. Turn right on Rte. 23 North for 1.2 miles to the sale site. Entrance on left at theTravelodge. From the East/West: Take I-70 to I-270 bypass, proceed North on I-270 to I-71 to Exit for Rtes.36 & US 37 and proceed as noted above. NOTE: Auction Entrance is off of Rt. 23.
OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989SITE PHONE: (863) 660-4811
AUCTIONCOLUMBUS, OHIO
(DELAWARE COUNTY FAIRGROUNDS)
LATE MODEL RENTAL RETURN AUCTION
CAT, KOMATSU, JOHN DEERE
CONSTRUCTION & OILFIELD
EQUIPMENT, TELESCOPIC FORKLIFTS,
BOOM & SCISSOR LIFTS, SUPPORT,
TRUCKS & TRAILERS.
EARLY HILITES: 10 FORESTRY EQUIPMENT: 3 Feller Bunchers:Case Hydro-Ax 621E, Case Hydro-Ax 411E, Timbco T425B, WoodProcessor: Multi-tech, 2 Saw Heads: Timberjack 608L 22in., Hydro-Ax22in., 2 Stump Heads:Hydro-Ax #1, Hydro-Ax #2, Tree Shear: Timberwolv,Attachments: Hydro-Ax 7010 Mowing Deck, Fecon BH74 8ft. MowingDeck, Tree Sprayer, FELLER BUNCHER: Timbco T425B, RECYCLER:Bandit Beast 3680, 3 WOOD CHIPPERS: Morbark, Bandit 1900, Bandit1590, WOOD PROCESSING EQUIPMENT: Multi-Tech Log Processor, 4RUBBER TIRED LOADERS: Cat 920, Hyundai HL760XTD, Kawasaki 65ZTM, TCM 806,CRAWLER TRACTOR: JD 450B, 3 RUBBER TRACKED SKID STEERS: Bobcat T190, ASVRC100, ASV Positrack RC100, 2 EXCAVATOR THUMBS: (2) New Tomahawk, 2 MESSAGEBOARDS: (2) Arrowboards, LOADER LANDSCAPE TRACTOR: Kubota L5030, 3 HYDROSEED-ERS: (2) Finn 2500gal. on t/a trailer, Hydro Seeder, SPRAYER: 55 Gal., 2 TREE SPADES: 2004 GMCC8500 (t/a), 2001 GMC 3500HD (s/a), VACUUM TRUCK: GMC 6500 (s/a), SWEEPER: 1987 Fordw/Sunvac Sweeper, CAB & CHASIS: GMC, 2 BUCKET TRUCKS: 1998 Ford F800 w/55ft. TerexCrane, 1992 Int’l. 4700 (s/a), 4 DUMP TRUCKS: 1988 Chevy Cheyenne, 1994 Chevy Kodiak (s/a), Int’l.S1700 (s/a), Ford (t/a), 6 TRUCK TRACTORS: 2006 Kenworth T800 (t/a), 2000 Sterling (tri.) (offsite),Peterbilt 378, 1994 Int’l. 4900 (s/a), 1988 Int’l F9370, (t/a), Int’l (s/a), STAKE TRUCK: 1999 Chevy 1ton, SERVICE TRUCK: 2004 Chevy (s/a), 2 PICKUPS: 1989 Chevy Silverado (4x4), Ford F250XLT,VAN: 1992 GMC Topkck Lo Pro, GRAVEL TRAIN: 1998 Fruehauf (Pup), LOG TRAILER: (t/a) w/ setof B Trains, WALKING FLOOR TRAILER: 1978 Monon 45ft. (tri.), FLATBED TRAILER: Alloy(t/a), 7 TAGALONG TRAILER: 2004 Towmaster (t/a), 1995 10T (t/a), 10T (tri), 16ft. Landscape Trailer(t/a), 16ft. Skid Steer (t/a), 14ft. Landscape (s/a), 12ft. (t/a), VAN TRAILER: 1978 Monon (t/a), 2 UTIL-ITY TRAILERS: 10ft. (s/a), (t/a), TOWING DOLLIES: (s/a), ANTIQUE EQUIPMENT: Steam-Roller, DUMP BODY: 3 yd. Steel, FLATBED BODY: 14ft. Debris Box, 4 FUEL TANKS: 500 Gallon,300 Gallon, Misc with pump, 3 SNOW PLOWS & SPREADERS: Western 9ft. Power Angle, Western8.5ft., Western 7.5ft., SUPPORT/MULCH/ SNOW EQUIPMENT: (10) Snow Pushers, (4) Sets of SteelTracks, Man Basket, 5000-7000 yards of Hardwood Mulch- no debris, Lofton Head, (2) Bush Blades, LeafBlower, Kawasaki Blade, TRUCK PART: Hydraulic Lift Gate, 6 TIRES & TRACKS: (4) Set SteelTracks, (2) Set of Cat Skid Steer Tracks, AGGREGATE: Mulch Pile, 2 PRESSURE WASHERS: (2)New Easy Kleen, ATTACHMENTS: Rubber Tired Loader: JRB 48in. Log Grapple, 10ft. Hydraulic RootGrapple, JRB 36in. Log Grapple, Skid Steer: (2) New Tomahawk 78in. Snow & Mulch Bucket, (2) NewTomahawk 72in. Rock Bucket, (2) New Tomahawk 72in. Smooth Bucket, (2) New Tomahawk 66in. BrushGrapple (one cylinder), (2) New Tomahawk 66in. Smoother Bucket, (2) New Tomahawk 66in. GrappleBucket (one cylinder), (2) New Tomahawk Stump Bucket, (6) New Tomahawk 42in. Fork Frame, (4) NewTomahawk HD Hay Spear, (10) New Tomahawk Quick Attach Mount Plate, Tractor: King Kutter 3PT CatI Carrier, 3PT Cat I Middle Buster, Lift: New Unused Man Basket, NEW SUPPORT EQUIPMENT: (4)New Mustang LF88 Plate Compactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill,New Mustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) NewMustang CV3500 Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in.Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. PlatformScales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in.Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses, (4) New Stiff Neck Pintle Hitches.
ADDRESS: 880 E Kochville Rd. Saginaw, MI 48604.DIRECTIONS: From MBS International Airport: Head northeast, left onto Garfield Road. Turn leftonto West Freeland Road, and right onto M-84 South. Turn left on Kochwille Road. Site on left.
SITE PHONE: (315) 886-1498
AUCTIONSAGINAW,MICHIGAN
LARGE LAND CLEARINGOPERATION AUCTION
BEST BRANDS & MODELS OF
LAND CLEARING EQUIPMENT TO
BE OFFERED ANYWHERE!
Heinz Tree Service
Page 96 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 97
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com
Sales Managers & Auctioneers, Inc.
ALEX
LYON & SON
NOTE: M.L. Chartier one of the top contractors in the state of Michigan has finished severaljobs at the same time and is selling some of the finest equipment ever to be sold in the Michiganarea. The BEST and the CLEANEST!!
EARLY HILITES: 8 SOIL REMEDIATION UNITS: Cedar Rapids 64LT, Cedar Rapids64LT Primary Drum, Cedar Rapids 10ft. x 24ft. Williams Type Control House (tri), CedarRapids 24in. x 50in. PC1245 Portable Stacking, Cedar Rapids 26in. x 11ft. Single ShaftReconstruction Mill, Cedar Rapids 64LT Filterhouse (tri), Cat 320KW Generator, Fruehauf 43ft.Tool Trailer (t/a), 10 HYDRAULIC EXCAVATORS: 2011 Cat 320DL, 2006-2005 Cat 320CL,2012 Cat 316EL, 2009 Cat 312DL, 2010 Cat 308DCR, 2010 Cat 307D, 2013 Cat 305.5E, 2007Cat 302.5C, Komatsu PC300LC-6, 3 STEEL SHEARS: Daemo DSCP700R Rotating Sheer,(2) Pallari Stump Shear, GRAPPLE: Labounty HDR 140 2&3 Tine, 3 EXCAVATOR BUCK-
ETS: Esco 48in. Digging Bucket, Esco 36in. Digging Bucket, Balderson 24in. Digging Bucket,2 EXCAVATOR THUMBS: (2) New Tomahawk Thumb, ARTICULATED HAUL TRUCK:
Volvo A25C, HAUL TRUCK PART: Unused Volvo A25 Scissor Tailgate, 2 MOTOR
GRADERS: Cat 160HVHP (scarifier), Cat 140G, 10 RUBBER TIRED LOADERS: Cat966G, 2013 Cat 950K, 2005 Cat 928GZ, (2) 2008 Cat 924H, 2011 Cat 908H, 2011 Cat 950H,Cat 928H, 2007 JD 544J, Kawasaki 90ZV, 8 CRAWLER TRACTORS: 2012-2007 CatD6KLGP (cab), Cat D6R, Cat D5MXL, Cat D5GXL, Cat D5GLGP, 2008 Cat D4KXL, 2012 CatD3KXL, 2 CRAWLER LOADERS: Cat 973, 2010 Cat 963D, 3 TRACTOR LOADER
BACKHOES: 2006 Cat 430E (4x4), 2011-2008 Cat 420EIT, ASPHALT ROLLER: 2008 CatCB14, 7 RUBBER TRACKED SKID STEERS: (2) 2013 Cat 297CXPS, 2008 Cat 297C,2011-2009 Cat 279C, 2011 Cat 259B3, 2012 Cat 289D, 2 GENERATORS: Cat XQ75, 2006Cat XQ60, SCREENING PLANT: 2007 Terex Finlay 790 , CONVEYOR & STACKER:
2012 Irock M-8036, WOOD CHIPPER: Morbark 13, 2 LOG SKIDDERS: TimberJack 460,TimberJack 380A, 8 SNOW EQUIPMENT: Master Craft Welding SP-144WL 12ft. SnowPusher, Master Craft Welding SP-120WL 10ft. Snow Pusher, Master Craft Welding SP-120SS10ft. Snow Pusher, Master Craft Welding SP-96SS 8ft. Snow Pusher, Master Craft Welding SP-78SS 6ft. 6in. Snow Pusher, Master Craft Welding SP-72SS 6ft. Snow Pusher, SWEEPER:
Tennant 7400, 2 HYDRO EXCAVATOR TRUCKS: (2) 2005 Int’l 7600, WATER TRUCK:
1992 Volvo (2600gal.), 2 DUMP TRUCKS: 2000-1999 Peterbilt 330 (tri.)., 4 TRUCK
TRACTORS: 2000 Western Star 4964SX (tri.), 1998 Kenworth T800 (t/a), 1990 Peterbilt 379
(t/a), 1990 Peterbuilt 357, CAB & CHASSIS:
2008 Ford F550XL, WINCH TRUCK: 1998Kenworth T800 (t/a), UTILITY TRUCK: 2001Chevy 3500HD (diesel, s/a), 3 SERVICE
TRUCKS: (2) 2011 Kenworth T270, 1999 FordF450XLT (loaded), 3 PICKUPS: 2006 Chevy2500HD (diesel), 2007-2005 Chevy 1500,ENCLOSED TAGALONG TRAILER: 1996 Classic 14ft. x 7ft. (t/a), TIRE & TRACK: SkidSteer Tracks, 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS:
Excavator: Pallari KH160 Stump Harvester Shear, Motor Grader: Cat Front Lift Group &Blade, Cat Snow Wing, Rubber Tired Loader: Cat HD Forks, Crawler: Fleco 1220in. Rake,Tractor Loader Backhoe: (3) Allied 24in. Plate Compactor, Skid Steer: (2) New Tomahawk72in. Rock Bucket, (2) New Tomahawk 78in. Snow & Mulch Bucket, (2) New Tomahawk 72in.Smooth Bucket, (2) New Tomahawk 66in. Brush Grapple (1 cylinder), (2) New Tomahawk66in. Smooth Bucket, (2) New Tomahawk 66in Grapple Bucket (1 cylinder), (2) NewTomahawk Stump Bucket, (6) New Tomahawk 42in. Fork Frame, (4) New Tomahawk HD HaySpear, (10) New Tomahawk Quick Attach Mount Plate, NEW SUPPORT EQUIPMENT: NewReading 96in. - 49in. Aluminum Diamond Plate Tool Boxes, (4) New Mustang LF88 PlateCompactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill, New MustangMP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) New MustangCV3500 Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in.Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x4ft. Platform Scales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air ImpactWrenches, (4) New 1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge WaterHoses, (4) New Stiff Neck Pintle Hitches.
Address: 6090 Starville Rd. Marine City, MI 48039-1021.
DIRECTIONS: From Detro Metro Airport: I-94 E to 26 Mile Rd. in Macomb County. Take exit 248 for26 Mile Rd. from I-94 E. Continue onto Marine City Hwy to right on Starville Rd.
SITE PHONE: (262) 903-6269
THURSDAY, NOVEMBER 6 @ 9:30 AM
THE BEST OF THE BEST EQUIPMENTAND TRUCKS AVAILABLE IN A LONG TIME!
LATE AND GREAT CAT, KOMATSU, VACUUM TRUCKS,
MECHANICS & SERVICE TRUCKS.
AUCTION
MAJOR JOB COMPLETIONTHE AUCTION OF THE YEAR.....!!!
PORT HURON (Marine City),MICHIGAN
M.L. Chartier Inc. M.L. Chartier Inc.
Page 98 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Coalition officials noted that in July,despite overall partisan gridlock, Congressoverwhelmingly extended authorization forthe surface transportation program andenacted a temporary funding patch for theHighway Trust Fund (HTF). That patchensures federal highway, bridge and transitinvestments will continue through next May.However, it was the fifth time in the pastseven years Congress took that approach,requiring nearly $65 billion in supplementalfunding to avoid significant cuts to trans-portation investments.On average, the HTF provides 52 percent
of the funding for highway and bridge capi-tal investments made by the nation’s statetransportation departments each year,Coalition officials added. “Congress needs to ‘keep the horse before
the cart’ and address the trust fund’s long-term revenue problem as was done in the1997 and 2004 tax bills. Then it can developand properly fund a six-year program billearly in 2015,” TCC Co-chair Pete Ruane,president and CEO of the American Road &Transportation Builders Association, said.“And ‘status-quo’ funding levels would sim-
ply perpetuate worsening traffic congestionand the inadequate physical condition of thenation’s highway and transit network.”The latest Congressional Budget Office
projections indicate Congress will need toidentify an additional $7 billion just to pre-serve highway and transit funding for the lastfour months of fiscal year 2015. Federal dataalso show maintaining current programfunding beyond 2015 will require an averageof $16 billion in additional revenues eachyear. That, Coalition officials point out, isthe revenue equivalent of a 10-cent increasein the federal gas tax.Despite widespread desire for a multi-
year federal surface transportation programreauthorization bill to boost economic com-petitiveness and job creation, such legisla-tion cannot move forward until a long-termtransportation funding solution is in place.Coalition officials are urging Congress toidentify and pass a funding HTF revenue fixto ensure Americans and the U.S. economycontinue to benefit from a world class trans-portation network.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Officials Urge Funding of HTFFUND from page 1
West Side Prescribes Deere 700K for Hospital ProjectNaperville, Ill., and it continues to be a family operation currentlybeing run by the second generation. West Side began with one dealer-ship with three employees on the “west side” of Chicago. Fifty yearslater, the company now serves more than 80 counties with 10 locationsspanning across Illinois, Indiana and Michigan. West Side continues togrow but holds close to the core values that built the foundation of thecompany.
(This story also can be found on Construction Equipment Guide’s Website at www.constructionequipmentguide.com.) CEG
GRIMMER from page 8
Grimmer Construction Inc.’s Bill Metz operates a John Deere 750J dozer.(L-R): Jeff Pratt, West Side Tractor Sales Co., John Grimmer andDan Grimmer have been working together for roughly 15 years.
LiuGong Makes AdditionsLiuGong North America has appointed
Jake Huang as vice president of LiuGongNorth America. Huang will be responsiblefor overseeing Mexico and Central America(a territory under the LiuGong NorthAmerica umbrella) and Dressta businessdevelopment. This role was previously heldby Dai Wuping, who has accepted a new rolewithin LiuGong Overseas Division atLiuGong global headquarters in Liuzhou,China. Huang joined LiuGong in 2002 and has
been working in the overseas sales and mar-keting division for 12 years. Prior to joiningthe LiuGong North America team, he heldthe positions of VP of LiuGong India and VPof LiuGong Hong Kong financing company.He will report to Marc Dowdell, president ofLiuGong North Amercia.LiuGong North America also made the
following recent additions:• Wojciech “Wojo” Gryzbala has been
appointed as Dressta parts technical support.He previously worked for LiuGong DresstaPoland where he has spent more than 10years in parts technical and logistics for theDressta product line.• Chen “Tiny” Zhe has been appointed as
LiuGong CE parts technical support. Hepreviously worked at LiuGong Global
Headquarters in Liuzhou, China.• Gina Salazar has been appointed as war-
ranty coordinator.• Shavonne Jaquess has been appointed as
senior parts customer representative.• Chanda Sexton has been appointed as
parts customer service representative.“We thank Dai Wuping for his many con-
tributions to our growth in the Mexican andCentral American markets and wish himwell in his new endeavor at our corporateheadquarters. We also look forward to thecontinued focus, support and improvementof this key strategic area with the appoint-ment of Jake Huang as VP,” said MarcDowdell, president of LiuGong NorthAmerica. “The additions of key roles in parts tech-
nical support for both Dressta and theLiuGong CE Lines, as well warranty andcustomer service, are further demonstrationof our commitment to continuous improve-ment of our product support team and spe-cialized technical focus on our core prod-ucts.”For more information, visit www.liu-
gongna.com.(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 99
BUY ONLINE
The new way to buyused equipment
Visit allEquip.com or call 855-827-1515
2006 Komatsu FG25T-16 Pneumatic Tire Forklift – $9,000
2005 JLG 3246ES Electric Scissor Lift – $7,750
2007 Bobcat 335G Mini Excavator – $22,500
2003 Bobcat S185 Skid-Steer Loader – $14,500
2005 JLG 460SJ 4WD Diesel Telescopic Boom Lift – $18,900
2007 Skytrak 6042 Telehandler – $24,500
2007 Case 580M Series 2 4x4 Backhoe Loader – $33,900
Excavators | Landscape Equipment | Generators | Trenching Equipment | Sweepers/Scrubbers | and much more!
Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.
2005 JLG 460SJ 4WD Dieselelesco TTelescopic Boom Lift – $18,900
2005 JLG 460SJ 4WD Dieselelescopic Boom Lift – $18,900
2007 Case 580M Series 2 4x4Backhoe Loader – $33,900
2007 Case 580M Series 2 4x4Backhoe Loader – $33,900
2007 Skytrak 6042elehandler – $24,500TTelehandler – $24,500
2007 Skytrak 6042elehandler – $24,500
2006 Komatsu FG25Te Fo Pneumatic Tir re Forklift
-16 FG25T T-16$9,000–e Forklift
2005 JLG 3246ESElectric Scissor Lift – $7,750
2005 JLG 3246ESElectric Scissor Lift – $7,750
2007 Bobcat 335GMini Excavator – $22,500
2007 Bobcat 335GMini Excavator – $22,500
2003 Bobcat S185Skid-Steer Loader – $14,500
2003 Bobcat S185Skid-Steer Loader – $14,500
ed arEquipment featur
Excavators | Landscape Equipment | Generators | T
esentation of items available on allEquip. Items arepre a red ar
Excavators | Landscape Equipment | Generators | T
e sold and added to inventory dailyesentation of items available on allEquip. Items ar
enching Equipment | Sweepers/Scrubbers | and much morrExcavators | Landscape Equipment | Generators | T
e sold and added to inventory daily
isit V allEquip.com
enching Equipment | Sweepers/Scrubbers | and much mor
.
allEquip.com or call 855-827
e sold and added to inventory daily
enching Equipment | Sweepers/Scrubbers | and much mor
5151- 855-827
e!enching Equipment | Sweepers/Scrubbers | and much mor
Page 100 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Topcon Develops Outreach Programs to Attract Students
• Job postings and internship opportuni-ties through Topcon and its vast dealer net-work
• Online course material including pre-sentations and videos
Recently, EPP partners were invited to animpressive collection of products, systems,software and technology, showcasing whereconstruction has come and is heading, that ison tour in an interactive demonstration andeducation traveling solutions center. TheTopcon Technology Roadshow is currentlyon a 24-city tour of North America, span-ning a 23,000-mi. circuit. The intent is tobring products and training close to thosewho can benefit from it.
The 52-ft. long mobile solutions centeralong with pop-outs and adjunct tents func-tion as the hub for presenting the latest posi-tioning technologies in the construction,surveying and GIS, and architecture/engi-neering/contractor (AEC) professions.
The new mobile classroom within the
customized 18-wheeler trailer seats morethan two-dozen visitors and not only allowsfor centralized demonstrations of the latestTopcon products and technologies, but isdesigned for interactive training sessions aswell.
Trade colleges and university-level tech-nical programs have been invited to partici-pate in the two-day visits at the locations.Counselors, instructors and students havehad opportunities to rub shoulders with sitesurveyors, 3D model builders, earth-movers, and milling and paving contractorswho are coming to see the latest technologyand solutions to their evolving needs.
“I have 24 students about to graduatefrom our heavy-duty-equipment technicianapprentice program who I asked to join meat the Toronto visit of the TechnologyRoadshow — 18 made it,” said Tim Allan,an instructor in The School ofTransportation at Centennial College,Toronto, Ont. “They loved seeing all thetechnologies in the display trailer and thor-oughly enjoyed the hands-on machine con-
trol demonstrations that went on outside inthe field. I was happy that they were askingthe Topcon people good, challenging tech-nical questions rather than just commentingon the operational.”
Allan learned about the TechnologyRoadshow from one of his students whoread about it in a construction trade maga-zine. Having access to the latest productsand seeing demonstrations of how criticalreal time data is to the successful comple-tion of construction projects made theirattendance worthwhile, Allan said.
Thomas Baden, instructor of heavyequipment operation at the Perry Campus ofHocking College, located in NewLexington, Ohio, was accompanied by twoother instructors and 15 of their studentswhen they attended the ColumbusRoadshow.
“It was amazing to see the newer tech-nology and how comprehensive the Topconoffering is,” Baden said. “My students — infact, all of us — are still talking about it.”
Baden said his students were a bit intimi-
dated when they first arrived but the Topcontechnical staff quickly made them feel wel-come.
“The Roadshow was worth it if only tosee how the GPS system controls themachine to achieve grade,” said Baden.“This opened our eyes to how extensive thetechnology is.”
At the Charlotte Technology Roadshow,Joshua Aldridge, instructor of the heavyequipment operator program at StanlyCommunity College, located in Albemarle,N.C., attended the event with nine of his stu-dents.
“My students were surprised to see all thetechnology out there and how machinesworking on a site can be linked to a super-visor on the site and to an off-site office,”Aldridge said. “I didn’t realize how precisethe grade control technology has become,and it seems like the cost for a system hascome down a bit from a few years ago.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
EPP partner schools and colleges are offered hands-on instructor and classroom training provided by a Topcon product specialist.
TOPCON from page 20
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 101
The Associated GeneralContractors of America will providehighway work zone safety trainingclasses next year due to a federal safe-ty grant the association earned. Theassociation will use the $135,000Susan Harwood Training Grant fromthe U.S. Department of Labor to offerthe safety training classes designed toprevent injuries among highway, streetand bridge construction workers, offi-cials said.“No amount of safety gear will pro-
tect a worker if they get hit by a speed-ing vehicle,” said Stephen E.Sandherr, the association’s chief exec-utive officer. “The best defense fromcrashes is teaching crews how to setup and operate safer work zones”According to the latest federal safe-
ty data, from 2003 to 2010, 962 work-
ers were killed at road constructionsites between 2003 and 2010.Meanwhile, a survey conducted by theassociation last spring found that 45percent of contractors had vehiclescrash into their work zones during thepast year. Even worse, workers areinjured in 20 percent of those crashesand killed in 6 percent of those crash-es.The highway work zone safety pro-
gram will be offered in eight differentlocations beginning in January 2015.Sandherr added that the associationexpects the training to have the impactof reaching and protecting thousandsof workers on hundreds of job sites byincorporating best practices that willbe used over and over. The programwill provide comprehensive informa-tion about proper set up of highway
work zones, flagger safety and heavyequipment management, he added.��Inaddition to the highway work zoneprogram, the association offers a vari-ety of safety programs and materialsthat many member construction firmscurrently use on areas such as fall pro-tection, crane safety and safety pro-gram management. The associationoffers educational materials to mem-ber firms as well as online and in-seatsafety training programs.“Our goal is clear, we want every
worker to go home safe and healthy,every day,” Sandherr said.For more information, call 703/548-
3118 or visit www.agc.org.(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
AGC to Provide Highway Work Zone Safety Training Program Due to Grant
Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com
Page 102 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
ABLE MANUFACTURING LLC ..........................................................86ADVANCE TIRE ..................................................................................63AIM ATTACHMENTS ..........................................................................28ALEX LYON & SON INC
COLUMBUS OH / SAGINAW MI................................................95PORT HURON MI ......................................................................97
ALEX PARIS CONTRACTING CO INC ................................................9ALTORFER CAT..................................................................................37AMERICAN STATE EQUIPMENT ........................................................7ARING EQUIPMENT CO INC ............................................................15ASC CONSTRUCTION EQUIP USA..............................................10,11ASPEN EQUIPMENT ..........................................................................57BAIR PRODUCTS INC........................................................................31BARGAINS ....................................................................................91,92BLANCHARD MACHINERY INC ........................................................22BOBCAT CO ..................................................................................52,53BOMAG AMERICA'S INC....................................................................81BOSS PRODUCTS ............................................................................63CASE CONSTRUCTION ....................................................................45CATERPILLAR INC ............................................................................49CEG SCALE MODELS........................................................................33CK POWER ........................................................................................35CLASSIFIEDS ....................................................................................90COMPANY WRENCH..........................................................................24CONSTRUCTION EQUIPMENT GUIDE
TRAILER PROMO......................................................................38FLORIDA AUCTION PROMO ....................................................78TARGETED EMAIL ....................................................................60WANTED ....................................................................................93REACH YOUR MARKET............................................................48BEAZLEY AUCTION TESTIMONIAL..........................................96
CUSTOM MADE PRODUCTS ............................................................31DOMINION EQUIPMENT PARTS ......................................................44EFFICIENCY PRODUCTIONS............................................................22ERB EQUIPMENT ..............................................................................13FABCO EQUIPMENT INC ....................................................................2FAE USA INC ......................................................................................86FINKBINER EQUIPMENT CO ..............................................................7FLANGE LOCK ..................................................................................35FOLEY EQUIPMENT CO ....................................................................27FURY MOTORS ..................................................................................16GEHL ..................................................................................................76GOMACO CORP ................................................................................82HINIKER NORTHEAST ......................................................................59HITACHI MFG......................................................................................68
HOWELL TRACTOR & EQUIPMENT CO ........................................104HYUNDAI ............................................................................................19HYUNDAI CONSTRUCTION EQUIPMENT........................................51ILLINOIS TRUCK & EQUIPMENT ........................................................3IRAY AUCTION
FOLEY MN ..............................................................................101IRONPLANET......................................................................................99JCB INC..........................................................................................64,65JFW EQUIPMENT INC........................................................................88JOB RENTALS AND SALES LLC ......................................................34JOHN DEERE ....................................................................................41JOHN DEERE SKID STEER ..............................................................58KOMATSU AMERICA CORP................................................42,43,72,73KUBOTA SVL ......................................................................................77LANO EQUIPMENT INC ....................................................................14LBX ....................................................................................................70LEEBOY ........................................................................................84,85MCCANN INDUSTRIES INC ................................................................6MEYER PRODUCTS LLC..............................................................61,62MIDWEST READY MIX & EQUIPMENT ............................................17MINNICH MFG ....................................................................................80NPK CONSTRUCTION EQUIPMENT INC..........................................29NTS TIRE SUPPLY ............................................................................28NUSS GROUP ....................................................................................23OKADA AMERICA ..............................................................................28PRO-TEC EQUIPMENT ......................................................................35PURPLE WAVE ................................................................................101RITCHIE BROS AUCTIONEERS
WILLISTON ND ........................................................................103ROAD BUILDERS MACHINERY......................................................6,25ROADTEC ..........................................................................................83ROLAND MACHINERY INC..................................................................5ROSCO MFG CO................................................................................89RUDD EQUIPMENT............................................................................21SOUTHEASTERN EQUIPMENT CO ..................................................32STAR EQUIPMENT LTD ......................................................................6TAKEUCHI......................................................................................66,67TITAN RENTS ....................................................................................34VERMEER SALES & SERVICE..........................................................31VOLVO COMPACTION ......................................................................88VOLVO CONSTRUCTION EQUIPMENT ............................................75WACKER NEUSON CORP ................................................................69WEST SIDE TRACTOR SALES..........................................................22WIRTGEN AMERICA ..........................................................................87YANMAR AMERICA ............................................................................71
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2014 • Page 103
rbauction.com | 701.774.9640Ritchie Brox. Auctioneers (America_ Inc. Auction Clerk License #225 / Auctioneer: Frederick R. Vilsmeier #996*OAC. Terms and conditions apply.
Bid with confidence▸ No minimum bids or reserve prices▸ Up to 100% financing available▸ Inspect and bid in person or online
Sell your equipmentCall today–any number of items accepted.
More items added dailyVisit rbauction.com to see all auctions and up-to-date listings.
Location4751 Hwy 1804, Williston, ND 58801
Featured itemsExcavatorsCrawler tractors Wheel loadersMotor gradersMotor scrapers Crushers and much more...
2008 CATERPILLAR D7R XR SERIES II 2007 CATERPILLAR CP563E
2011 CATERPILLAR 627H
3 – KENWORTH T800 & 2 – 2012 WESTERN STAR 4900SA
2 – 2011 GROVE GMK5165-2 165 TON
2005 CATERPILLAR 160H AWD VHP 2012 KENWORTH C500 BED
Unreserved public auction
Williston, North DakotaNovember 20 (Thursday) | 8 am
Page 104 • October 25, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE