Midsize Wheel Loader Application Chart

2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 1. Wear Safety Equipment. 2. Keep hands and feet clear. 3. Beware of flying objects. Prior to removing any pins or parts refer to Manufacturers Service manual for proper procedures for securing and stabilizing equipment. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Bucket Teeth / Tips Loader Frame to Bucket Tilt Link to Bucket Pin Rod End Tilt Cylinder Tilt Link to Loader Frame Lift Cylinder Pin Loader Frame to Main Frame Pin Tilt Cylinder Pin Tire Bead Wheel Stud Remover Race Wheel Bearings Steering Cylinder to Frame Assembly Articulation Pin Steering Pin to Frame MACHINE MODELS CAT 980H DAEWOO MEGA 400-V, MEGA 500-V DRESSTA 55 B, 560C HYUNDAI HL780-3A, HL780XTD-3A KAWASAKI 95ZV, 95ZV & 115ZV HIGH LIFT KOMATSU WA500-3, WA600-3 VOLVO L220E See back for Pin Removal / Insertion specifications and recommended Slide Sledge® tool kit. Midsize Wheel Loader Application Chart Operating Weight: 48,500 - 109,000 lb.

Transcript of Midsize Wheel Loader Application Chart

Page 1: Midsize Wheel Loader Application Chart

12

3

4

5

6

7

8

910

11

12

13

14

1. Wear Safety Equipment.2. Keep hands and feet clear.3. Beware of flying objects.

Prior to removing any pins or parts refer to Manufacturers Service manual for proper procedures for securing and stabilizing equipment.

123456789

1011121314

Bucket Teeth / TipsLoader Frame to BucketTilt Link to Bucket PinRod End Tilt CylinderTilt Link to Loader FrameLift Cylinder PinLoader Frame to Main Frame PinTilt Cylinder PinTire BeadWheel Stud RemoverRace Wheel BearingsSteering Cylinder to Frame AssemblyArticulation PinSteering Pin to Frame

MACHINE MODELSCAT 980HDAEWOO MEGA 400-V, MEGA 500-VDRESSTA 55 B, 560CHYUNDAI HL780-3A, HL780XTD-3AKAWASAKI 95ZV, 95ZV & 115ZV HIGH LIFTKOMATSU WA500-3, WA600-3VOLVO L220E

See back for Pin Removal / Insertion specifications and recommended Slide Sledge® tool kit.

Midsize Wheel Loader Application ChartOperating Weight: 48,500 - 109,000 lb.

Page 2: Midsize Wheel Loader Application Chart

The following removal and insertion tips are manufacturer recommendations for this model. Other model wheel loaders may use similar tips and tools for similar removals. Consult with manufacturer for specific models and uses.

Removal and installation should only be performed on pins that have been properly serviced and maintained.

Tool/Tip Description Part##1

#2

#3

#4

#5

#6

#7

#8

#9

#10

#11

#12

#13

#14

R/I ToolR/I TipR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipAccessoryR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I Tip

14 lb./30” Slide Sledge1/2” Ripper Tooth Pin Remover1/2” Ripper Tooth Pin Inserter13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver21lb./46” Slide SledgeSmall Tire Bead Breaker5 lb. Handle Weight14 lb./30” Slide Sledge2” Pin Driver9lb./30” Slide SledgeBushing/Bearing/Seal Plate Driver14 lb./30” Slide Sledge1 1/4” Pin Driver14 lb./30” Slide Sledge1 1/4” Pin Driver14 lb./30” Slide Sledge1 1/4” Pin Driver

211301213304213303211203213104211203213104211203213104211203213104211203213104211203213104211203213104211401213529211808211301213104211103213525211301213103211301213103211301213103

Item

Recommended Tool Kit for Midsize Wheel LoadersProduct Part#9lb./30” Slide Sledge13 lb./46" Slide Sledge14lb./30” Slide Sledge21lb./46” Slide Sledge1 1/4” Pin Driver2” Pin Driver1/2” Bucket Tooth Remover1/2” Bucket Tooth InserterSmall Tire Bead BreakerBushing/Bearing/Seal Plate Driver5 lb. Handle Weight

211103211203211301211401213103213104213304213303213529213525211808

Midsize Wheel Loader Application ChartOperating Weight: 48,500 - 109,000 lb.