MicroStation XM2
-
Upload
moceanografia -
Category
Documents
-
view
238 -
download
0
Transcript of MicroStation XM2
-
8/7/2019 MicroStation XM2
1/23
Eric Thomas
ODOT Office of Production
-
8/7/2019 MicroStation XM2
2/23
Wish list. All Custom Line Styles, Cells, and Text placed in the
basemap at a scale of 1
Ability to set the display scale for the line stylesand cells when referenced
Were ALMOST there with XM Line Styles (Active Model and References) Text (Active Model and References)
Cells (Active Model Only)
-
8/7/2019 MicroStation XM2
3/23
Set in the Model Properties In MicroStation XM, can be applied to Cells
and Line Styles
-
8/7/2019 MicroStation XM2
4/23
Two types of line styles in ODOT Standards: Cosmetic line styles represent the location of an
item, but not the actual size.
Examples: Fence, Guardrail
Physical line styles represent the location and thesize of the item
Examples: Pavement marking lines
-
8/7/2019 MicroStation XM2
5/23
Line Style Scaling (v8 2004 Edition) Cosmetic line styles are placed at the intended
plotting scale
Physical line styles are placed with a scale value of 1
-
8/7/2019 MicroStation XM2
6/23
Line Style scaling (MicroStation XM) Place ALL custom line styles using a scale of 1
Use the Model to control the display of the line style
Also works across Reference attachments
-
8/7/2019 MicroStation XM2
7/23
Attaching References: New Option: Global Line
Style Scale
Allows you to definewhich file controls the
Line Style Scale display
Typically set this toMaster
-
8/7/2019 MicroStation XM2
8/23
Two types of cells in ODOT Standards: Cosmetic cells represent the location of an item,
but not the actual size.
Examples: Power Pole, Mail Box, Fire Hydrant
Physical cells represent the location and the sizeof the item
Examples: Catch Basins, Manholes, Inlets
-
8/7/2019 MicroStation XM2
9/23
Cell Scaling (v8 2004 Edition)
Cosmetic cells are placed at the intended plottingscale
Physical cells are placed at a scale of 1
-
8/7/2019 MicroStation XM2
10/23
Cell Scaling (MicroStation XM) Cells can be defined as Annotation Cells
When placed, these cells are scaled by the ModelAnnotation Scale
-
8/7/2019 MicroStation XM2
11/23
Cell Placement (MicroStation XM): Set the Model Annotation Scale
Set the Cell Placement X Scale and Y Scale to 1
Toggle on the Annotation Scale as shown below
Cells defined as Annotation Cells will be placed atthe scale defined in the Model Properties
-
8/7/2019 MicroStation XM2
12/23
Important Notes: Changing the Annotation Scale will re-scale the
annotation cells in the Active Model only Cells in reference attachments are not scaled
according to the active model properties
Cells will rescale across references in MicroStation
V8 Athens Edition (scheduled for release this fall)
-
8/7/2019 MicroStation XM2
13/23
Where were heading (MicroStation Athens): All Custom Line Styles and Cells placed in the
Basemap at a scale of 1
Model Annotation Scale used to control the displayof the cells and line styles in active model and in allreference attachments
Allows the Basemap to be referenced for any scale
-
8/7/2019 MicroStation XM2
14/23
ODOTV7.ucf and ODOTV7.pcf Intended for viewing or plotting old v7 files 63 Levels (Level 1 Level 63)
Access to GEOPAK is disabled
ODOT MDL and VBA Apps are not supported
Cannot use pre-V8 cell libraries
Cells placed from a V8 cell library are placed on level 1
-
8/7/2019 MicroStation XM2
15/23
Service Pack 1 released March, 2008 Version 08.09.05.36
Over 200 Bug Fixes
See the GEOPAK On-Line help for the list of
enhancements
Service Pack 2 scheduled for June, 2008 Includes new Corridor Modeling tools
InRoads Roadway Designer ported to GEOPAK
-
8/7/2019 MicroStation XM2
16/23
Terrain Model format (.tin) Updated in preparation for future versions of
Bentley Software
Terrain Models created in GEOPAK XM are notbackwards compatible
-
8/7/2019 MicroStation XM2
17/23
Mapping Survey Data with SP1 (08.09.05.36) Line styles mapped using a scale of 1 will be
displayed according to the model annotation scale
Annotation Cells mapped using a scale of 1 do notdisplay according to the model annotation scale
The Annotationscale Add command is used to add
annotation scale to previously placed cells. Thiscommand does not work on annotation cells plottedthrough GEOPAK XM 08.09.05.36 or earlier
-
8/7/2019 MicroStation XM2
18/23
Mapping Survey Data with SP2 (08.09.06.XX) Annotation Cells mapped using a scale of 1 still do
not display according to the model annotation scale
Annotationscale Add can be used to apply theannotation scale to annotation cells drawn throughGEOPAK Survey and COGO Visualization
D&C Manager does not honor the annotation scalewhen placing cells (fixed in Athens)
-
8/7/2019 MicroStation XM2
19/23
MicroStation V8 XM Edition file format hasnot changed from V8 2004 Edition You can use V8 files in XM without translation
XM Features (Priority, Transparency, etc.) are notsupported in V8 2004 Edition
Elements placed in V8 2004 Edition will notautomatically inherit the Priority and Transparency
values from the XM Level Library Use the Update Levels from Library command
Be careful - This command will reset the symbologyoverrides
-
8/7/2019 MicroStation XM2
20/23
Project Manager Path for the SMD points tothe old v8std folder
-
8/7/2019 MicroStation XM2
21/23
All GEOPAK Data is forward compatible fromv8 to XM Edition without translation
TIN files created or edited in XM are notbackwards compatible
-
8/7/2019 MicroStation XM2
22/23
ODOT Website:
ODOT MicroStation XM Quick Access Guide
http://www.dot.state.oh.us/cadd/XM/XM_QuickStart.pdf
ODOT XM Configuration Informationhttp://www.dot.state.oh.us/cadd/XM/ODOT_Config.pdf
http://www.dot.state.oh.us/cadd/XM/XM_QuickStart.pdfhttp://www.dot.state.oh.us/cadd/XM/ODOT_Config.pdfhttp://www.dot.state.oh.us/cadd/XM/ODOT_Config.pdfhttp://www.dot.state.oh.us/cadd/XM/XM_QuickStart.pdf -
8/7/2019 MicroStation XM2
23/23
Questions?
Eric Thomas
ODOT Office of [email protected]
614-752-6403