Microlinea Series 3 Indirect/ TM Direct Wet Location - LED€¦ · Microlinea Series 3 Indirect/...
Transcript of Microlinea Series 3 Indirect/ TM Direct Wet Location - LED€¦ · Microlinea Series 3 Indirect/...
ML3WL - I/D
3-17/32" x 5-9/16" Indirect/Direct
Reflector/Heat SinkIndirect - .060" thick formed aluminum finished
Dwith a high reflectance white enamel.
with a high reflectance white enamel.irect - .060" thick formed aluminum finished
Driver
Circuitry
PAll fixures are factory pre-wired for a single circuit.
rovision for multiple switching/circuiting is optional.
Wiring
wiAll fixures intended for continuous rows are provided
th factory installed quick-connect wiring.
S P E C I F I C A T I O N S
Microlinea Series 3 Indirect/
Two-piece .125" thick extruded aluminum. Die-castaluminum end caps are fully gasketed and securedwith no visible fasteners. Standard lengths are nominal 2’, 3’, 4’, 6’ and 8’. Provisions may be made for continuous rows of virtually any length.
Finish
cStandard and custom finishes are baked powderoat electrostatically applied (2.0 mil minimum
thickness) to assure aesthetics and durability.Indirect Optical Controls
Direct Optical Controls
(LOH) .100” thick, high transmittance extruded
ML3WL-I/D-MO/MO
Direct Wet Location - LEDTM
ML3WL-I/D-MO/HOML3WL-I/D-HO/MOML3WL-I/D-HO/HO
Osram-Sylvania “Optotronic” power supply isUL/CUL recognized, 0-10V dimming available,120-277 universal voltage. 347V also available.
Osram-Sylvania LED modules available for 3000K,3500K and 4000K CCT:
MO/MO: *3585 Total Delivered Lms. at 35 System Watts
MO/HO: *4575 Total Delivered Lms. at 46 System WattsHO/MO: *4635 Total Delivered Lms. at 46 System Watts
HO/HO: *5616 Total Delivered Lms. at 57 System Watts
Light Engine
*Due to continued advancement in LED technology, lumen performance is subject to change. Please visit our website for the most up-to-date information.
Precision Architectural Lighting 4830 Timber Creek Drive Houston, Texas 77017Tel 713.946.4343 Fax 713.946.4441 www.pal-lighting.com
tand permanently sealed against dust and water
acrylic lens, formulated for maximum diffusion ofhe LED light source. Lens is continuously gasketed
intrusion.
(LOH) .100” thick, high transmittance extruded acrylic snap-in lens, formulated for maximum diffusion of the LED light source. Lens iscontinuously gasketed against dust and waterintrusion.
Internal Construction
Housing
All internal mechanical components, including fasteners, are aluminum or stainless steel.
All fixtures are UL/CUL listed for use in ‘Wet Locations’. Ambient temperature rated up to 40° C, or 35° C withbattery back-up. IP-65 rated**
Mounting
Certifications
All mounting components are aluminum or
ceiling assemblies is matte black. Stem/Canopy assemblies are painted to match fixture housing.
stainless steel. Standard finish for wall and
Suspended or Wall MountWet Locations/IP-65 Rated
(LED)
**The IP (or Ingress Protection) rating
a luminaire from outside elements.
(Overall Width 3-17/32", Luminous Apertures 3-7/32")
Rigid Stem Wall
4/20
5-9/16”
3-17/32”
(*Values per 4’ length using 4000K LED modules)
Catalog Number Type
Project Name
(VR) Vandal Resistant: .100” thick, high transmittance extruded 100% D.R. acryliclens with tamper-resistant hardware.
(VR) Vandal Resistant: .100" thick, high
transmittance extruded 100% D.R. acryliclens with tamper-resistant hardware.
defines the degree of protection for
Made in America
Limited WarrantyLED Boards & Drivers
5Year5
Year5
Year
Sample Catalog Number: ML3WL-I/D - HO/HO - K40 / K40 - 80 - 4 - P - LOH / LOH - F01M - EF - 120 - DIM1 ML3WL-I/D
PAL ML3WL-I/D Wet Location Indirect/DirectLumen Output/4’: HO/HO -HO(Up) / HO(Down) = 5616 Total Lms. - 99 Lm/W(Using 4000K)
CCT (Indirect): K30 -3000K, K35 -3500K, K40 -4000K
Fixture Length: 2’, 3’, 4’, 6’, and 8’Mounting: W = WallIndirect Optical Controls:
Standard Finish: F01M Matte White
Voltage: 120V, 277V, 347V or UNV (Universal Voltage)
MO/MO -MO(Up) / MO(Down) = 3585 Total Lms. - 103 Lm/W CO/CO - Custom Output (Contact factory for available output range)
Direct Optical Controls: LOH = LED Optimized High Transmittance Gasketed Lens VR = 100% D.R. Acrylic Lens w/Tamper-Resist Hardware
Options: EMCKT = Emergency Circuit (Separate Hot & Neutral) EBPHST = Self-Testing Battery Pack (10 Watt) *N/A for 2 Fixture, *N/A for 347V’ DIM1 = Dimming - to 1%
FS = Fused Drivers CWD = Cold Weather Driver -40 Deg C Ambient Temp Rating (Available for High Output Only - 3’ or Longer Fixtures. *N/A for 100 - 1% Dimming Option)
/
F11T Textured Black F12 Ultrasonic Clear F10 Bronzed FCC Custom Color
/
CCT (D ir e c t ): K30 -3000K, K35 -3500K, K40 -4000K CRI: 80 (Standard)
HO/MO -HO(Up) / MO(Down) = 4635 Total Lms. - 101 Lm/WMO/HO -MO(Up) / HO(Down) = 4575 Total Lms. - 99 Lm/W
P = Rigid Stem Assy (Stems up to 24” Standard)LOH = LED Optimized High Transmittance Gasketed Lens VR = 100% D.R. Acrylic Lens w/Tamper-Resist Hardware
Power Feed Location: EF = End Feed TF = Top Feed
ML3WL-I/D-HO/HO-K40-LOH/LOH
LED Optimized High Transmittance Lens
Catalog Number: ML3WL-I/D-HO/HO-K40-4'-X-LOH/LOH-120
Report Number: #LLIA000676-006A.ies
: Extruded Aluminum Housing with
White Aluminum Refl ector and LED
Optimized Acrylic Lenses Up and Down
LED Module: Multiple White Low-Power Light
Emitting Diodes (LEDs) in a precise
Total Luminaire Effi cacy = 98.9 Lm/W
Suspended/Wall
For more information, visit our website at ww w.pal-lighting.com
lay-out.
High Output Up/High Output Down
Color Rendering Index (CRI) = 82
Luminaire Description
ML3WL-I/D-MO/HO-K40-LOH/LOH
LED Optimized High Transmittance Lens
Catalog Number: ML3WL-I/D-MO/HO-K40-4'-X-LOH/LOH-120
Report Number: #LLIA000676-004A.ies
: Extruded Aluminum Housing with
White Aluminum Refl ector and LED
Optimized Acrylic Lenses Up and Down
LED Module: Multiple White Low-Power Light
Emitting Diodes (LEDs) in a precise
Total Luminaire Effi cacy = 99.5 Lm/W
lay-out.
Medium Output Up/High Output Down
Color Rendering Index (CRI) = 82
Luminaire Description
ML3WL-I/D-HO/MO-K40-LOH/LOH
LED Optimized High Transmittance Lens
Catalog Number: ML3WL-I/D-HO/MO-K40-4'-X-LOH/LOH-120
Report Number: #LLIA000676-005A.ies
: Extruded Aluminum Housing with
White Aluminum Refl ector and LED
Optimized Acrylic Lenses Up and Down
LED Module: Multiple White Low-Power Light
Emitting Diodes (LEDs) in a precise
Total Luminaire Effi cacy = 101.4 Lm/W
lay-out.
High Output Up/Medium Output Down
Color Rendering Index (CRI) = 82
Luminaire Description
ML3WL-I/D-MO/MO-K40-LOH/LOH
LED Optimized High Transmittance Lens
Catalog Number: ML3WL-I/D-MO/MO-K40-4'-X-LOH/LOH-120
Report Number: #LLIA000676-003A.ies
: Extruded Aluminum Housing with
White Aluminum Refl ector and LED
Optimized Acrylic Lenses Up and Down
LED Module: Multiple White Low-Power Light
Emitting Diodes (LEDs) in a precise
Total Luminaire Effi cacy = 103.0 Lm/W
lay-out.
High Output Up/High Output Down
Color Rendering Index (CRI) = 82
Luminaire Description
0˚ 15 ˚ 30 ˚ 45 ˚
60 ˚
75 ˚
90 ˚
105 ˚
120 ˚
135 ˚150 ˚165 ˚180 ˚
LEGEND: 0-deg
90-deg
0˚ 15 ˚ 30 ˚ 45 ˚
60 ˚
75 ˚
90 ˚
105 ˚
120 ˚
135 ˚150 ˚165 ˚180 ˚
LEGEND: 0-deg
90-deg
0˚ 15 ˚ 30 ˚ 45 ˚
60 ˚
75 ˚
90 ˚
105 ˚
120 ˚
135 ˚150 ˚165 ˚180 ˚
LEGEND:
0-deg
90-deg
0˚ 15 ˚ 30 ˚ 45 ˚
60 ˚
75 ˚
90 ˚
105 ˚
120 ˚
135 ˚150 ˚165 ˚180 ˚
LEGEND:
0-deg
90-deg
Made in AmericaPrecision Architectural Lighting 4830 Timber Creek Drive Houston, Texas 77017Tel 713.946.4343 Fax 713.946.4441 www.pal-lighting.com
52% Up 48% Down
63% Up 37% Down 53% Up 47% Down
41% Up 59% Down