MICROJIGPRODUCT CATALOG2017-2018

4-9

10-11

12-19

20-21

22-23

24-25

2017 MICROJIG Product List 26-27

A Message from MICROJIG 2

Your projects are a labor of love, just like our products.That’s why we put ourselves in your workshop, imagining every way you’ll use

and experience our family of brands. Throughout your projects, you’ll feel the

difference our intelligent engineering and carefully selected materials make.

We’ve made the craft simpler, so you can work safer.

We’re always moving forward, so you always work smarter.

WORK SMARTER.

Contributing to the renewal ofAmerican manufacturing since 2001.

WORK SAFER.A must-have for any table saw.

See the GRR-RIPPER in action. microjig.com/grr-ripper

GRR-RIPPER 3D Pushblock Systems

Replacement Legs

GRR-RIPPERProduct Number # GR-100

GRR-RIPPER AdvancedProduct Number # GR-200

Replacement Legs SetProduct Number: RR-303

Includes one 1/4” Leg, one 1/2” Leg and one Center Leg.

Hardware & PartsAll GRR-RIPPER hardware and parts can be purchased individually.

Visit MICROJIG.com to order.

1/4” Replacement LegProduct Number: GRP-5

1/2” Replacement LegProduct Number: GRP-4

Center Replacement Leg Product Number: GRP-3

7

2

1

6

5

7

4

Instructional DVD included6

3

Protect hands Moving-Blade-GuardTM shields hands from the blade.

Virtually eliminate kickback Provides the three directions of force you need on table saws.

Saw Blade Tunnel Rip or resaw as narrowas 1/4” consistently without moving the fence.

Extreme Grip Proprietary Green GRR-RIP non-slip material provides superior gripping power.

Work small pieces safelyBalance Support squares the GRR-RIPPER for small and narrow workpieces.

Control both sides of stockAdjustable Center Leg controls the keeper and off-cut of the workpiece.

Secure against the fence Stabilizing Plate secures workpiece level to fence, preventing drift.

Get extra grip or space Adjustable Spacer adds 1” of additional Green GRR-RIP for controlling wide stock. Not shown.

1

2

3

4

5

6

7

8

Essential control for ultimate precision and safety.

The GRR-RIPPER 3D Pushblock applies three directions of pressure on your workpiece providing superior precision, control and safety throughout the cut.

Accessories

Handle Bridge KitProduct Number: GRHB-010

Unique arch design gives the handle four points of contact, evenly distributing downward pressure. Angle the handle for more ergonomic comfort. Bonus Trailing Hook included.

Deflector/ConnectorProduct Number: GRDC-020

Acts as a chip deflector preventing material from flying towards you while freehand routing. Bridge two GRR-RIPPERs to tackle longer or wider stock. Quickly connects to the Handle Bridge Kit for fast, easy and safe use.

9

Accessories

1/8” LegProduct Number: GRP-11G

Rip 1/8” thin strips safely, accurately and consistently on a table saw with the GRR-RIPPER 1/8” Leg. Features MICROJIG’s proprietary Green GRR-RIP non-slip material.

Gravity Heel KitProduct Number: GRGH-040

Hooks the tail-end of your workpiece and automatically retracts mid-board. Provides extra leverage to help push through the cut and prevent blow out. For use with table saws, bandsaws, jointers and router tables. Adjustable up to 1”. Replacement Heels available. Includes 5 Heels, 2 Heel Spacers and mounting hardware, enough for outfitting 2 GRR-RIPPERs.8

11

Set repeatable taper cutsSwitch between two tapers on a single workpiece. MemoryLocks maintain two independent stops, making repeatable cuts quick and easy.

Dial in the perfect taper Use the rise and run ColorMatch dial to set your taper between0” to 2” with 1/16” intervals.

Use the degree scale ColorMatch dial to set exact angles as low as 1/8th of 1º and expands from 0º to 10º.

• Easily set angles by rise over run or degree with the ColorMatch dials.

• Precision tapered cutting as accurate as 1/8th of a degree.

• Works with the GRR-RIPPER for ultimate safety and control.

• Switch between two tapers quickly and easily with the built-in MemoryLocks.

• Create 2-, 4-, 6- or 8-sided tapered legs.

• Use on the router table to create custom tapered profiles for exquisite detail on your project legs.

11

MICRODIAL Tapering JigProduct Number: TJ-5000

For use on table saws, router tables and bandsaws with the GRR-RIPPER (sold separately). IncludesInstructional DVD.

The most precise,adjustable tapering jig.

Instructional DVD included

10See the MICRODIAL in action. microjig.com/microdial

SMART TAPERS

GET CREATIVE.Dovetail Clamps – designed for creativity, engineered to work smarter.Learn more about the MATCHFIT System. microjig.com/matchfit

15

Reach new heights.No longer limited by the edge. The MATCHFIT Dovetail Clamp allows for unlimited fence heights. Mount directly to the table saw fence.

See the MATCHFIT Dovetail Clamps in action and get FREE project plans. Visit microjig.com/clamps today.

Get perfect pressure.For flat glue-ups, groove dovetails into a table top to get even clamping pressure.

Live on the edge.With a few dovetail grooves you can build straight edge or taper jigs.

MATCHFIT Dovetail Clamps Product Number: DVC-5252K2

1/2”

3/8” 14º

Universally compatible with1/2” 14° dovetail router bits

MATCHFIT Dovetail Clamps – clamping freedom that goes beyond the edge.Clamp virtually anywhere with the only clamping system that fits wood tracks you groove. MATCHFIT Dovetail Clamps are engineered to slide easily into dovetail grooves made by any 1/2” diameter,14° dovetail router bit. Endless ways to make your projects go easier. Work smarter.

14

MATCHFIT Dovetail ClampsProduct Number: DVC-525K2

MATCHFIT Dado Stop – the most precise wayto make dados with any table saw blade.Inlay beautiful designs or cut perfect half-laps in your next woodworkingproject with the MATCHFIT Dado Stop, a true MICROJIG innovation.

Gauge the exact width of your cross-dado for a perfect fit.Simple and easy to use, the MATCHFIT Dado Stop sets the shoulders of your cross dado using the actual part that will be fitted in the groove for a perfect fit without measuring or test cuts. Works with a single blade or stack dado blades. No hassles, no tricky measurements, just perfect-fittingdado cuts. Work smarter.

MATCHFIT Dado StopProduct Number: DS-333

For use with MATCHFIT Dovetail Clamps, sold separately.1716

See the Dado Stop in action. microjig.com/dado

Record dado settingsfor future reference.

Set precise blade kerf and dado width with your

own personal template.

43

Convenient router bit templatefor Dovetail Clamp grooves.

2

Quick blade height template for clearance slots.

1

Fast setup,pinpoint accuracy.Whether you’re making dados with the Dado Stop, or grooving tracks for the Dovetail Clamps, the MATCHFIT Setup Gauge will make your work smarter, faster, and easier.

Set up perfect-fitting dados fast when using the MATCHFIT Dado Stop.Lock in exact saw thickness for fast, repeatable setups.

Set the perfect height for clearance slots and dovetail grooves when creating tracks for MATCHFIT Dovetail Clamps.

Setup GaugeProduct Number: SG-133

18

See the Setup Gauge in action.microjig.com/setupgauge

1 2

3 4

Dado Stop ProProduct Number: MF-1004

Includes MATCHFIT Dovetail Clamp, Dado Stop and Setup Gauge.

19

MATCHFIT Setup Gauge Product Number: SG-133

21

ControlThe GRR-RIP BLOCK’s podular Green GRR-RIP material provides extreme grip for increased safety and stability when working with jointers, bandsaws, router tables, shapers and table saws.

VersatilityUse the 90º wall for veneers or resawing on bandsaws. Or use GRR-RIP BLOCK against the router fence for beaded face frames and other profiles. The Smart Hooks still engage vertically for superior control.

ProtectionWield improved control over your workpiece for freehand routing while keeping your hands clear and safe. (GRR-RIP BLOCK shown here with the optional MJ Deflector/Connector accessory.)

GRR-RIP BLOCK Smart Pushblock Product Number: GB-1

20

The smart choice for safety.Harness the ultimate gripping power of the only pushblock with Smart Hooks that knows where to grab your workpiece. GRR-RIP BLOCK’s Smart Hooks drop down into position when you need them, and retract when you don’t.

Powerful gripProprietary non-slip material gives you unbelievable gripping power and command over your workpiece.

Gravity powered Smart HooksSmart Hooks automatically drop down when you need them, grabbing the tail end of the workpiece and instantly retracting mid-board. There when you need them, out of the way when you don’t.

See the GRR-RIP BLOCK in action. microjig.com/grr-ripblock

ZEROPLAY Miter Bars

Top-Down InstallationSquare your sled as you tighten.

Precisely SquareAchieve perfectly square cuts.

Build essential shop sleds, jigs,and fixtures.Hassle-free miter bars. Fits any standard 3/4” x 3/8” T-Track, ShopSmith and General 350 tracks.

ZEROPLAY Miter StopProduct Number: ZP9-S1

Reliable and precise hold-down anchors for table saw tops and miter tracks. For T-Track miter slots only.

23

ZEROPLAY Miter Bar SystemProduct Number: ZP9-B2S2

Two ZEROPLAY Miter BarsTwo Miter Stops, for T-Track miter slots only.

ZEROPLAY Miter BarProduct Number: ZP9-B1

One ZEROPLAY Miter Bar

Build table saw sleds fast.Create perfectly square crosscut jigs fast. ZEROPLAY Miter Bars take miter bars and table saw sleds to the next level of precision. By using the One-touch Calibration, you instantly fill the full width of the miter slot for no side-to-side play.

22See the ZEROPLAY in action. microjig.com/zeroplay

One-Touch CalibrationPrecision fit. No side-to-side play.

1

2

MJ SPLITTER SteelPro systems work with plastic or wood-based Zero Clearance Inserts (ZCI).

MJ SPLITTER SteelPro Systems Tougher than kickback. MJ SPLITTERs are easy to install, easy to use, easy to align, and don’t get in the way.

Tough to the core, the MJ SPLITTER SteelProhas an ABS polymer shell reinforced witha solid stainless steel core. Able to takeon the stress caused by many solid woods, the SteelPro will greatly reduce the chance of kickback on your table saw and virtually eliminate burning.

Fool-Proof Installation The precision drill guide eliminates guesswork when installing into your Zero Clearance Insert.

Double the Safety Install two MJ SPLITTER SteelPros to prevent kickback on the keeper and off-cut side.

1 SteelPro Product Number: SP-2

For full kerf 10” saw blades. 90º cut only.Kerf range 0.118” to 0.145”.

2 SteelPro TK Product Number: SP-2TK

For thin kerf 10” saw blades. 90º cut only.Kerf range 0.090” to 0.118”

2516

Prevent kickback,binding, andburning.Aftermarket adjustabletable saw splitter systems.Work safer.

24

See MJ SPLITTERs in action. microjig.com/splitter

MICRODIAL Model #

MICRODIAL Tapering Jig TJ-5000

Making a Sofa Table DVD MW-DVD1

GRR-RIP BLOCK

GRR-RIP BLOCK Smart Pushblock GB-1

ZEROPLAY

Miter Bar, 1 Bar ZP9-B1

Miter Bar System, 2 Bars + 2 Stops ZP9-B2S2

Miter Stop ZP9-S1

MJ SPLITTER Systems

1/8” Full Kerf Splitter Package (Green) SP-0125

SteelPro 1/8” Full Kerf Splitter Package (Blue) SP-2

SteelPro Thin Kerf Splitter Package (Orange) SP-2TK

Thin Kerf Splitter Package (Yellow) SP-0100TK

MJ SPLITTER Replacement Parts Model #

1/8” Full Kerf Splitters (Green) SP-G-P3

SteelPro 1/8” Full Kerf Splitters (Blue) SP-B-P3

SteelPro Kerf Keepers (Blue) SP-B-P4

SteelPro Kerf Keepers (Orange) SP-O-P4

SteelPro Thin Kerf Splitters (Orange) SP-O-P3

Thin Kerf Splitters (Yellow) SP-Y-P3

MATCHFIT Model #

Dovetail Clamps DVC-525K2

Dado Stop DS-333

Dado Stop Pro MF-1004

Setup Gauge SG-133

Apparel Model #

Work Smarter T-Shirt MJ-S1

Visit MICROJIG.com to place your order today.

2017-2018 MICROJIG Product List

27

GRR-RIPPER 3D Pushblock Systems Model #

GRR-RIPPER GR-100

GRR-RIPPER Advanced GR-200

GRR-RIPPER Accessories Model #

1/8” Leg GRP-11G Deflector/Connector GRDC-020

GRR-RIPPER Upgrade Kit GRAK-404

Gravity Heel Kit GRGH-040

Handle Bridge Kit GRHB-010

GRR-RIPPER Replacement Parts Model #

1/2” Leg GRP-4 1/4” Leg GRP-5

Adjustable Spacer GRP-8

Balance Support GRP-6

Center Leg GRP-3

Gravity Heels GRGH-045

GRR-RIPPER Replacement Parts Continued Model #

Handle with Hardware GRP-1

Main Body GRP-2

3 Leg Set RR-303

Stabilizing Plate GRP-7

GRR-RIPPER Hardware Model #

1/4-20 Oval Nut 10-Pack GR-H7K

1/4-20 Thumb Knob 4-Pack GR-H13K

10-32 Offset Oval Nut 10-Pack GR-H8K

10-32x1/2” Thumb Screw 4-Pack GR-H5K

10-32x5/8” Thumb Screw 4-Pack GR-H6K

Black O-Ring 9/32” OD 20-Pack GR-H3K

GRAK-404 Blue Bag Hardware GR-H404 Blue

Nylon Shoulder Washer 10-Pack GR-H14K

Orange O-Ring 5/16” OD 20-Pack GR-H4K

GR-100 Red Bag Hardware GR-H100 Red

T-Bolt 1/4-20x1 3/4” 10-Pack GR-H12K

2017-2018 MICROJIG Product List

26

7212 Sandscove Ct. • Winter Park, FL 32792 • USA

Phone: 1-855-RIP-SAFE (747-7233) • International: 407-696-6695

Email: support@microjig.com

MICROJIG.com