Microfilm Reader Directions
-
Upload
bart-gioia -
Category
Documents
-
view
218 -
download
0
description
Transcript of Microfilm Reader Directions
Welcome to Baldwin Public Library’s
Microfilm Viewer and Scanner
I. Getting Started
Powering the Machine
To run the microfilm reader, turn on power
buttons 1 through 3.
Buttons 1 & 2 are visible from the front.
Button 3: Located behind the Microfilm
reader above the “l” in the word “Digital”
Button 4: To turn on the microfiche reader,
slide the red power lever to the right.
II. Loading Microfilm
1. Place microfilm spool on left spindle and drag lead film under the first white plastic roller.
2. To open the film cover, slide the switch to the left. The switch is located to the right of the
first roller. Gently pull the microfilm lead underneath and close the reader cover. Pull the
microfilm leader under the second roller.
3. On the spool on the right, place the microfilm lead through the middle.
4. Twist the tension knob until the microfilm lead draws firm.
III. Control Panel – Top
Browse Push right to advance the microfilm.
Push left to reverse the microfilm.
Red Backward
Red Forward
Red arrow pointing left fast rewinds the microfilm.
Red arrow pointing right fast advances the microfilm.
Gray Backward
Gray Forward
Gray arrow pointing to the left slowly rewinds the microfilm.
Gray arrow pointing to the right slowly advances the microfilm.
Speed Dial Adjusts the speed at which the microfilm advances or rewinds.
IV. Control Panel – Bottom
Viewer Mode View microfilm on microfilm screen.
PC1 View microfilm on PC monitor screen.
Pause Freezes a frame.
Mirror Image Creates a reverse image for viewing.
Brightness Control &
Level
Turns brightness adjustment option on/off.
Increases and decreases brightness levels.
Focus & Zoom Turns focus option on/off.
Zooms in and out of microfilm image.
V. Scanning Microfilm Using Scan-Write
1. Press the PC1 button in Scanner Mode Box.
2. On the desktop computer screen, double click “Scan-Write” icon.
3. You’ll see the Scan-Write Welcome Screen. Click anywhere on the screen to begin.
4. Choose “ST Direct Film Scanner“ from the Source Options. Click on the “Select”
button.
5. Choose the Wizard or Classic Mode.
6. Follow the directions on the computer screen to scan an image in either mode.
VI. Scan-Write Toolbar
Scan Images Scans new images.
Edit Scans Adjust brightness, color, contrast, alignment.
Burn CD Save your selected scans to a blank CD.
Send to HD Allows users to save on Flash / Thumb Drive only.
Users can save in .jpg, .png, or .tiff graphic format.
Print Send scans to Public Station printer.
Email Permits users to email selected scans.
Finish Closes the scanning session. Scanned images will be erased after
final prompt