![1 195.337 mb 195.338 mb 2kb 195.339 mb 195.34 mb o z o U ... · 195.337 mb 195.338 mb 2kb 195.339 mb 195.34 mb o z o U.] U.] Thiel Hey 1 80.836 80.838 mb 80.84 80.842 mb Figure S7](https://static.fdocuments.us/doc/165x107/5e71a866b2da8320f30922bc/1-195337-mb-195338-mb-2kb-195339-mb-19534-mb-o-z-o-u-195337-mb-195338.jpg)
MicroAmp MB-14 Circuit Board Straight-Through Transmission ...
1
ASSEMBLY THROUGH-LINE SCHEMATIC For additional product information, please visit www.twinind.com Contact information: 925-866-8946 (phone) 925-866-8937 (fax) [email protected] MicroAmp MB-14 Circuit Board Straight-Through Transmission Line The MicroAmp MB-14 circuit board is used for a straight-through connecon with the MicroAmp MH series of connectorized housings. It can be used as an extension when designing mulple board circuits with the MH-2 housing, thereby allowing a single board to be tested before adding a second one in cascade. The MB-14 can also be used to create custom passive networks by cung the center trace and soldering components in series or shunt. Boards are fabricated from a high-performance 13 mil thick RO-4350 laminate with RoHS compable ENIG plang (electroless nickel/immersion gold) on both the component side and the solid boom ground plane. The board measures 0.490" x 0.590" and mounts into the housing with four or eight #1-72 screws for opmal high frequency grounding. Pads for the input/output RF connectors allow the SMA center pins to be easily soldered to the board aſter it is installed into the housing. REF SIZE FUNCTION J1 N/A RF port J2 N/A RF port • Use for traight-through connecons • Can also be used for custom passive networks • RO-4350 board material • Fits MicroAmp MH-series housings FEATURES
Transcript of MicroAmp MB-14 Circuit Board Straight-Through Transmission ...
ASSEMBLYTHROUGH-LINE SCHEMATIC
For additional product information, please visit www.twinind.comContact information: 925-866-8946 (phone) 925-866-8937 (fax) [email protected]
MicroAmp MB-14 Circuit BoardStraight-Through Transmission Line
The MicroAmp MB-14 circuit board is used for a straight-through connection with the MicroAmp MH series of connectorized
housings. It can be used as an extension when designing multiple board circuits with the MH-2 housing, thereby allowing a single
board to be tested before adding a second one in cascade. The MB-14 can also be used to create custom passive networks by cutting
the center trace and soldering components in series or shunt. Boards are fabricated from a high-performance 13 mil thick RO-4350
laminate with RoHS compatible ENIG plating (electroless nickel/immersion gold) on both the component side and the solid bottom
ground plane. The board measures 0.490" x 0.590" and mounts into the housing with four or eight #1-72 screws for optimal high
frequency grounding. Pads for the input/output RF connectors allow the SMA center pins to be easily soldered to the board after it is
installed into the housing.
R E F S I Z E F U N C T I O N
J1 N/A RF portJ2 N/A RF port
• Use for traight-through connections
• Can also be used for
custom passive networks
• RO-4350 board material
• Fits MicroAmp MH-series housings
F E A T U R E S
![Profiling Memory in Lua · 77.20 999 MB 1295 MB 1 main chunk (main.lua) 8.65 112 MB 112 MB 147 insert [C] 7.01 91 MB 91 MB 1,000,001 for iterator [C] 5.89 76 MB 76 MB 1,000,000 gmatch](https://static.fdocuments.us/doc/165x107/6020bbf0c069bf413e212b0e/profiling-memory-in-lua-7720-999-mb-1295-mb-1-main-chunk-mainlua-865-112-mb.jpg)
