Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

25

description

Ponnequin turbines output voltage(580Von the Micon side, 690Von the Vestas side) to pad mount transformers.  These step the voltage up to 25KV.   - PowerPoint PPT Presentation

Transcript of Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Page 1: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 2: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

• Ponnequin turbines output voltage(580Von the Micon side, 690Von the Vestas side) to pad mount transformers.  These step the voltage up to 25KV.  

• Connected in parallel in groups of 7 to 9 turbines (daisey chained), then thru a metering cabinet, then to the 25Kv switch gear.  There is an isolation breaker for each “phase” or string of 7 turbines.  

• The power then passes thru the 25kv main bus breaker to the GSU in the substation, where it is stepped up to 115 Kv and goes out over WAPPA lines.  There is relaying protection in the 25Kv switch gear.

• Blade length Micon 75’ Vestas 77’• Low Speed Micon 14/22 rpm Vestas 29 rpm• Rotor Weight Micon 30000 lb Vestas 16000 lb• Yaw deck height Micon 187’ Vestas 217’

Page 3: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

• Micon– Cut in speed 7 mph– Cut out speed 56 mph– Transfer from low to high speed occurs at 14

mph

• Vestas– Cut in speed 9 mph– Maximum output at 33 mph– Cut out speed 56 mph

Page 4: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

59.6

80

This picture shows a 2 MW wind turbine with a 80-meter (262 feet) diameter blades size.

Note the Boeing 747 jumbo jet next to the turbine

80 m.

How Big is a 2-MW How Big is a 2-MW Wind Turbine?Wind Turbine?

..

Page 5: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 6: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Renewable Energy - Wind

Page 7: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 8: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 9: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Wind Turbine Foundation Behavior and Design ConsiderationsKirk Morgan, Eric Ntambakwa Garrad Hassan America, Inc

Footing Concrete Volume (yds^3) vs. Rated Power (MW)

0

100

200

300

400

500

600

1 1.5 2 2.5 3

Power (MW)

YD

s^

3

Page 10: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 11: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Wind speed effect on power output

• 14 mph vs 16 mph average wind speed

• 50% more power– (16*16*16)/(14*14*14) =- 1.49

Page 12: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Existing MW MW Under Construction

43,542 7,979

State Existing MW

MW Under Construction

Rank (Existing)

Texas 10,145 486 1

Iowa 3,738 792 2

California 3,599 1,256 3

Minnesota 2,681 61 4

Illinois 2,438 563 5

Washington 2,356 343 6

Oregon 2,305 848 7

Colorado 1,800 0 8

Oklahoma 1,612 788 9

North Dakota 1,424 150 10

American Wind Energy Association

Page 13: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 14: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Ponnequin 09

Page 15: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Ponnequin 09

Page 16: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph

Ponnequin 09

Page 17: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 18: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 19: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 20: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 21: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 22: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 23: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 24: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph
Page 25: Micon Cut in speed 7 mph Cut out speed 56 mph Transfer from low to high speed occurs at 14 mph