MGC Manual Gauge Control - addexinc.com · 2/24/2016 · The MGC permits selective adjustment to...
Transcript of MGC Manual Gauge Control - addexinc.com · 2/24/2016 · The MGC permits selective adjustment to...
251 Murray StreetNewark, NY 14513Tel: (+1) 315.331.7700Fax: (+1) 315.331.7734Email: [email protected]
MGC Manual Gauge Control
SIZE
3”– 6”75–150 mm
36”915 mm 6 x 3”/76 mm 100
6”– 12”150–315 mm
48”1220 mm 6 x 4”/102 mm 132
13”– 20”325–500 mm
56”1423 mm 6 x 4”/102 mm 168
21”– 28”525–700 mm
64”1626 mm 8 x 4”/102 mm 216
29”– 32”725–800 mm
76”1931 mm 10 x 4”/102 mm 272
33”– 36”825–900 mm
76”1931 mm 10 x 4”/102 mm 288
37”– 40”925–1000 mm
76”1931 mm 10 x 4”/102 mm 304
Number of Air Inlets
x o
Number of ControlZones
AIR REQUIREMENTSSPECS
US METRICD” x 150 = CFM
@ 80ºF & 25”H2O
LEGEND: D”= Die diameter in inchesD mm = Die diameter in mmCFM = Cubic feet per minuteF = Degrees FahrenheitC = Degrees Celsius
Larger ones are available upon request
D mm x 10 = m3/h@ 27ºC & 6.2 KPa
FEATURES
The Addex Manual Gauge Control Air Ring is based uponour Dual Lip Air Ring that has been the standard for theblown film industry worldwide.
The MGC permits selective adjustment to correct film gaugedeviation caused by extruder, die, or ambient anomalies byas much as 25% (several customers have achieved a 50%reduction).
Depending on die size, the MGC is equipped with anywherefrom 100 to 304 individually adjustable control bolts in10mm (3/8”) wide air vanes, providing high resolution, yetrequiring only average operator skills.
Because it is manually operated, its price is only a fractionof an automatic system.
Making gauge corrections with the MGC can best be com-pared to adjusting die bolts to make up for uneven filmthickness distribution.
A spot is marked on the film bubble, indicating its orienta-tion, the gauge of the film sample with the marking ismeasured off line and plotted, and the relative adjustingbolts on the MGC are turned in or out to make corrections.The magnitude of correction per bolt turn can also bedetermined by before and after film measurements.Although the MGC lends itself to use with stationary aswell as oscillating/rotating dies, the latter can control onlyabout half the gauge deviations.
In addition to the MGC, Addex also manufactures a fullyautomatic External Gauge Control system (EGC), and anautomatic Internal Gauge Control system (IGC).
OTHER ADDEX PRODUCTS
• ICE™ Intensive Cooling Element
• EGC Automatic Gauge Control
• DIBC Digital Internal Cooling Control
• LFR Laminar Flow Air Rings
INDIVIDUAL MANUALLY-ADJUSTABLE
AIR CONTROL BOLTS
MANUALLY ADJUSTABLEAIR CONTROL
BOLTSSTANDARD DESIGN
ADDEX LIP SET
AIR FLOW VANES
TWO-PIECE BOLT COVER
®
251 Murray StreetNewark, NY 14513Tel: (+1) 315.331.7700Fax: (+1) 315.331.7734Email: [email protected]
MGC Manual Gauge Control