MF1-UL Specifications - Steinel
Transcript of MF1-UL Specifications - Steinel
MF1-UL Wireless Control Module
Features
Key Features:
��915 MHz wireless technology makes creating lighting zones easy and convenient ��Up to 100 ft (30.5 m) of safe wireless connection��32 different addresses or groups��Eliminates the need for recircuiting��Easy snap in installation to wireless ready control devices
The MF1-UL Wireless Control Module works with STEINEL’s wireless lighting control devices to create control zones without the need for additional wiring.
The MF1-UL simply plugs into a STEINEL wireless device. Devices are then grouped together via a DIP switch address. Any transmitter device with an MF1-UL module will switch all devices in a group ON when triggered. For example, when a sensor detects occupancy and swit-ches lights ON, this switching command will be sent to all other wireless devices within the group.
All wireless devices with the same group address will consequently switch the lights ON. The lights will not switch OFF until no command signals are sent to the group and the last device’s time delay has expired.
Applications
Areas where wireless group control is desired, such as in warehouses, distribution centers, gymnasiums, and loading docks
915 MHz
915 MHz wireless technology
www.steinel.net (800) 852-4343
Project Name:
Location:
MF1-UL SpecificationsMF1-UL PN 64309
RF Technology 915 MHz, up to 100 feet of safe wireless connection
Environment -4°F to +122°F, -20°C to +50°C
Dimensions (WxHxD)
2.96 x 1.38 x .62 in, 75.2 x 35.05 x 15.75 mm,
Warranty 5 years
Certifications C-UL-US Listed, RoHS, FCC & IC Compliant
MF1-UL Wireless Control Module
Mounting
Address DIP switch
The MF1-UL’s 5 position DIP switch can be used for setting 32 different addresses or groups.
All devices in a group must have the same DIP switch setting.
M-04307-1
Plug in connection to wireless control device
The MF1-UL typically is factory pre-installed to a wireless control device. If installation is necessary, the module just snaps into the connection terminal. No tools are required.
1 2 3 4 5
1 2 3 4 5
www.steinel.net (800) 852-4343
Project Name:
Location:
MF1-UL SpecificationsMF1-UL PN 64309
RF Technology 915 MHz, up to 100 feet of safe wireless connection
Environment -4°F to +122°F, -20°C to +50°C
Dimensions (WxHxD)
2.96 x 1.38 x .62 in, 75.2 x 35.05 x 15.75 mm,
Warranty 5 years
Certifications C-UL-US Listed, RoHS, FCC & IC Compliant
MF1-UL Addressing
STEINEL Wireless Lighting
Settings
Group 1 Group 2EM 1-1
LP 1-1
EM 1-2
LP 1-2
ON DIP
1 3 4 52
ON DIP
1 3 4 52
LP - Lighting Branch CircuitEM - Emergency Lighting Circuit
- Lighting Fixture- Night Light - RHB 300
- Lighting Zone/GroupLEGEND
Group 1 Group 2EM 1-1
LP 1-1
EM 1-2
LP 1-2
ON DIP
1 3 4 52
ON DIP
1 3 4 52
LP - Lighting Branch CircuitEM - Emergency Lighting Circuit
- Lighting Fixture- Night Light - RHB 300
- Lighting Zone/GroupLEGEND
The STEINEL wireless lighting control system enables group control of lighting fixtures. In this example, the RHB 300 sensors (with MF1-UL factory installed) are set up into two groups (or lighting zones). Detection by one sensor in a group, activates lighting for all the sensors in that group.