Metso Lt300 LokoTrack Cone - Slings, Water Pumps, … Lt300 LokoTrack Cone (s/n 74346) 6 cu. yd....
Transcript of Metso Lt300 LokoTrack Cone - Slings, Water Pumps, … Lt300 LokoTrack Cone (s/n 74346) 6 cu. yd....
Metso Lt300 LokoTrack Cone
(s/n 74346)
6 cu. yd. hopper with 48” x 10’-6” long vibrating feeder
Side walls of feed hopper hydraulically fold
Unit can be fed with excavator, conveyor, or loader
Vibrating feeder currently has grizzly sections blanked over, so all feed material goes into Hp300
crusher
48” x 20’ feed conveyor to crusher
Bypass conveyor - transfers material passing thru grizzly section to the front discharge conveyor
(bypassing cone crusher).
Hp300 Cone Crusher. Hydraulic crusher clearing. Eight crusher cavities to choose from depending
upon application.
Cone crusher is equipped with a sonic level sensor located in the crusher feed cavity to assist in
keeping the cavity level in a consistent ‘choke fed’ condition (feed can be set to automatically speed
up/slow down depending upon cavity level)
48” x 29’-6” front discharge conveyor. 8’-10” discharge height.
CAT C-15 540 hp Tier III engine
85kVA generator (unit equipped with electrical outlets for (2) 11 kw for auxiliary equipment, (1) 32
amp/460volt, (2) 16 amp/110 volt for hand tools
Water spraying system with pipes, hoses, nozzles (no tank, no water pump)
IC600 Controls with built-in diagnostics and Single button process start for ease of use.
4219 E 50TH
DES MOINES, IA 50317
Phone: 515-964-8600
WATS: 800-247-2400
FAX: 515-309-0667
For more information call Mark Bothwell at 515-681-8140, or Craig Harman at 515-681-0520
Remote radio control.
Tracks are 20” wide x 11’-3” c-c. D57 size.
Transport weight: 115,000 lbs.
Transport dimensions: 11’-6” w x 12’-5” t x 58’-7” l
Optional 30”x40’ recirculating conveyor that can be mounted onto LT to accept oversize material from
a screening plant, this 5,000 lbs. recirculating conveyor shipped separately.
Unit built in 2008. 4,587 process hours as of 3/25/15
A unique feature of this unit design is that it has all controls and self-contained power already on the unit (no
need for larger gen-set, additional electrical switchgear, electric cables, etc…..). Just track unit into position
and start running.
Unit is currently available and ready to work. Just let us know what your application is and we’ll help you
select the proper crusher liner configuration.
Without Feeder Assy Module
Lt300 less Feeder Module Assy & Counterweight
New transport dimensions:
14'-1" H x 11'-4" W x 54' L
Total Weight = 101,000 lbs.
Track length 14' long.