METALLURGICAL MICROSCOPEvertexmachines.com/SinglePDF/Metallurgical SinglePDF.pdf · 2019. 12....

Set of graduated eyepiece :

10mm scale divided into 100 parts is mountedinside 5x and 10x eyepieces.The scale can befocussed by movement of the eyepiece cap. These are used for measurement of case depth,decarb depth, flex size etc.

Grain size comparison eyepiece :

Compare specimen grain size of the specimenwith standard grain size graticule ( size1 to 8)mounted inside the 10x widefield eyepiece

Grid eyepiece 10x10 :

10x10 square grid graticule mounted in 10x widefield eyepiece.helps in determiningthe distribution of nodules in S.G.Iron

Test scale :

(precision glass scale 1mm divided in 100 parts.useful for verifying accuracy of the graduated eyepieces)

Tel- +91 22 27791675/65169832.Email : [email protected], Visit us at - www.vertexmachines.com

VERTEX ENGINEERS & ASSOCIATESR.H. 116, SECTOR 2B, NEAR DATTA MEGHE ENGINEERING COLLEGE, AIROLI, NAVI MUMBAI 400 708

METALLURGICAL MICROSCOPE

METALLURGICAL CATALOGUE

Transmitted light attachment :

This can be attached to Microscope INBT2, VMM4 & VMM6 only .Transmitted light can be useful for observingmetal powders, transparent or semitransparent objects.

Analyser Polriser attachment :This can be attached to Microscope INBT2, VMM4 & VMM6 only .Polarised light is very useful when observingNon ferrous specimens

Spare lamps 12V 50W Tungstan halogen :

( 6 nos/pack.)

Lens cleaning tissue book :(for cleaning Microscope optics)(12 nos/pack

Abrasive cut off machine :This is an ideal,small & compact machine for cuttingspecimens for microscopic examination.Its uniqueJob clamping vice slides against the cutting wheel bya counter weight.Coolent pump is in built.Cuts sections upto 70mmWheel size 200 mm x 1.5 mm thick Cutting speed 2000 & 3000 RPMMotor 1 HP Single phase 220V A/CDimensions 650Lx590 B x 400 L mmNet weight 72 Kgs




Spare cut off wheels :(Diameter 200 mm x 1.5 mm thick )(12 nos/ Pack)

Cold setting Resin :When the specimen is of odd shape or size tp hold itwhile polishing it becomes essential to mount it.(One pack Consists Liquid 400 ml + powder 400 gm)

Die Set : For mounting the specimens with above cold setting They are kept face down in the die set & cold settingresin in 1:1 powder liquid proportion is poured in cavity.Mounted specimens become ready in five minutes.Mould diameter 25,32,38 & 50 mm.Thickness 15mmBakelite mounting press

For mounting the specimens with Bakelite powderSpecimen is kept face down in the Cavity & bakelitePowder is Hot moulded around itc with hydraulic pressure. Mould dia 30 mm.With Digital timer. Operates on 220 V A/C

Bakelite powder ( 10 kgs/pack)Stand for holding polish papers :(Strips of four different grades of polish papers can beclamped on this stand for hand polishing the specimen)

Belt polisher :For preliminary surface preparation of metallurgicalspecimens in the laboratory it is an effective machine.Belt tension is adjustable.Belt can be quickly changed.Adequate safety provided by the belt guard.Belt size 100mmx910mm endlessMotor 0.25 HP 1440 RPM 220V A/CDimensions 460Lx370Bx250H mm

Spare belts for belt polisher(size 100 mm Wx 915 mm L Endless) (12 Nos/Pack)




METALLURGICAL MICROSCOPE TYPE RV3 USB :For the first time in India, this is the only Inverted Metallurgical microscopewhich has a built in CCD camera & equiped with a USB Port to plugit directly to your computer for Instant photography & Image analysis. One more Video out port to connect it to a TV monitor. Microstructureimage with outstanding clarity & resolution is simultaneously seen inthe binoclular head, Computer monitor & or TV. Seprate computerinterfacing attachment ( at item 5) is not required for this microscope.Stand

140 x 170 mm with graduations. Easy movement& adjustment of specimen.

Illumination Incident light with 12V 50W tungstan halogen lampLight house provided with iris diaphragm & slot forfilters, Continuously adjustable illumination.

Nose piece Quadruple revolving, with positive click stop.Coarse focusing By rack and pinionFine focusing Least count 0.002 mmBinocular head Inclined at 45 degrees.with Interpupillary

and diaptor setting adjustmentsObjectives Achromatic 4x, 10x, 20x, 40x, 60x Eyepieces Huygenian 5x, 10x wide field,15x Magnification Minimum 20x to Maximum 900x

Magnification Table :

Eyepiece Objective Magnification Eyepiece Objective Magnification5 4 20 10WF 4 405 10 50 10WF 10 1005 20 100 10WF 20 2005 40 200 10WF 40 4005 60 300 10WF 60 600

Operating voltage 220V A/C, 50HZ. Net weightInstrument Size 400 L x 340 B x 330 H mm Gross weight

Built in power supply for the Halogen lampMechanical Stage

13 Kgs 18 Kgs




Very sturdy & rigid, designed for Industrial use.

METALLURGICAL MICROSCOPE TYPE VMM4 :

This is a very sturdy Inverted metallurgical Microscope designed for Industrial use. The Inverted design eliminates the need for specimen mounting. Only one side of the specimen needs to be polished & no leveling is needed.Can be interfaced with Computer for Image analysis work.Stand Very sturdy & rigid, designed for Industrial use.Mechanical Stage 140 x 170 mm with graduations. Easy movement &

adjustment of specimen.Illumination Incident light with 12V 50W tungstan halogen lamp

Light house provided with iris diaphram & slot for filtersContinuously adjustable illumination.

Nose piece Quadruple revolving nose piece with positive click stop.Coarse focusing By rack and pinionFine focusing Least Count 0.002 mmBinocular head Inclined at 45 degrees.with Interpupillary & diopter settingObjectives Achromatic 4x, 10x, 20x, 40x, 60xEyepieces Huygenian 5x, 10x wide field , 15x Magnification Minimum 20x to Maximum 1500x Magnification Table

Eyepiece Objective Magnification Eyepiece Objective Magnification5 4 20 10WF 4 405 10 50 10WF 10 1005 20 100 10WF 20 2005 40 200 10WF 40 4005 60 300 10WF 60 600

Operating voltage 220V A/C, 50HZ. Net weight 12 KgsInstrument Size 400 L x 200 B x 330 H mm Gross weight 17 KgsMETALLURGICAL MICROSCOPE TYPE INBT2 :This is a very sturdy Inverted metallurgical Microscope designed for Industrial use. The Inverted design eliminates the need for specimen mounting. Only one side of the specimen needs to be polished & no leveling is needed.Can be easily interfaced with Computer for Image analysis work.Stand Very sturdy & rigid, designed for Industrial use.Mechanical Stage 140 x 170 mm with graduations. Easy movement

for adjustment of specimen.Illumination Incident light with 12V 50W halogen lamp

Light house provided with iris diaphram & filtersContinuously adjustable illumination.

Nose piece Triple revolving nose piece Coarse focusing By rack and pinion




Fine focusing Least Count 0.002 mmBinocular head Inclined at 45 degrees.with Interpupillary & diopter settingObjectives Achromatic 4x, 10x, 20x, 40x, 60x Eyepieces Huygenian 5x, 10x wide field , 15x Magnification Minimum 20x to Maximum 1500x Magnification TableEyepiece Objective Magnification Eyepiece Objective Magnification

5 4 20 10WF 4 405 10 50 10WF 10 1005 20 100 10WF 20 2005 40 200 10WF 40 4005 60 300 10WF 60 600

Operating voltage 220V A/C, 50HZ. Net weightInstrument Size 280 L x 160 B x 270 H mm Gross weightMETALLURGICAL MICROSCOPE TYPE ESM1 TIn addition to Normal Visual Metallurgical applications this microscopeis equipped with a Trinocular head. A CCD Camera can be attached &Interfaced with your computer for Instant photography & Image analysisStand Sturdy & rigid, designed for Industrial use.

with built in power supply for the Halogen lamp.Mechanical Stage 120 x 140 mm with graduations. Easy Movement &

adjustment of specimen.Illumination Incident light with 6V 20W tungstan halogen lamp

Light house provided with iris diaphragm & slot forfilters, Continuously adjustable illumination.

Nose piece Triple revolving nose piece with positive click stop.Coarse focusing By rack and pinionFine focusing Least count 0.002 mmTrinocular head Inclined at 45 degrees.Rotatable 360 degrees.Provided

with interpupillary distance & diaptor setting adjustment.CCD or 35mm camera can be attached to the tube

Objectives Achromatic 4x, 10x, 40x ,60 xEyepieces Huygenian 5x, 10x WF, 15x Magnification Minimum 20x to Maximum 1500x Magnification TableEyepiece Objective Magnification Eyepiece Objective Magnification

5 4 20 10WF 4 405 10 50 10WF 10 1005 40 200 10WF 40 4005 60 300 10WF 60 600

Operating voltage 220V A/C, 50HZ. Net weight 7 KgsInstrument Size 210 L x 190 B x 520 H mm Gross weight 9 Kgs



7.5 Kg15 kg


Accessories for the microscope :

Computer Interface cum CCTV attachment

(Using your Own Computer,Printer & or TV)Microscope Type ESM1T, VMM4, VMM6 & INBT2 can be Interfaced to your own computer to give instant photographs of the Microstructure image. This attachment enables you to take sharp & clear Microstructurephotographs & & their printouts instantly. The Image can be viewed on computer monitor. The image can besaved on computer hard disk & you can maintain a permanent record of your inspected samples .The savedphotographs can be sent to your vendors or clients by Email.In absence of the computer it can be seen on TV This attachment is very much necessary If Image analyzer software is to be used

ComputerColor monitor

TV

Mouse

Key board

Computer


Printer



CCD Camera

1 Computer Pentium III / IV ,Minimum 450Mhz or higher,Hard disk 10 GB, RAM 64 MB CD ROM Drive, Windows 98 SE / 2000

2 Printer Color ink jet printer 610C / 640 C of HP or equivalent.3 TV Samsung 14" Color TV or equivalent model with Video in socket

Following material to be supplied by us as Computer interface attachment

1/3" CCD Image sensor BLC function512(H)x582(V) PAL White balance Auto380 TV lines Video balance 1 Vpp, 75O 5 Lux/F2.0 Power source DC 12V More than 45db (AGC off) Current consumption 150 ma1/60(1/50) to 1/100000 auto

3.Camera to Microscope Opto-Mechanical coupler.4.Frame grabber card ( to be fitted inside your Computer on the PCI slot) with its Installation manualand Original CD of the Capture program software.


Following material to be Provided by you



1 .CCD CameraPick up elementNumber of pixelResolutionMin.IlluminationS/N RatioElectronic shutter

AVC 550 (PAL) Japan make or equivalent latest available. Auto detect

2.Regulated power supply for the CCD Camera , camera to computer cord

PROFILE PROJECTOR

PROFILE PROJECTOR TYPE VW 1000VW 1000 is an Industrial Profile projector. It is very rugged inconstruction & designed for use on the shop floor itselfThe electronic DRO eliminates any manual errors in measuring.Screen Fine ground glass.Dia. 300 mm.

Rotatable 360 degrees. Measuring 1 degree260 mm etched scale on X & Y axis LC 0.01 MM

Stage 125 x 125 mm Mechanical stage.Fitted with DRO On both X & Y axis.X Micrometer 25 mm LC 0.001 mmY Micrometer 25 mm LC 0.001 mmEasy movement & adjustment

Magnification 15x20x30X40X

Illumination Transmitted light with One 12V 100WTungstan Halogen Lamp. The illuminationcan be increased or decreased

Focusing By Rack & Penion movement of Stage Operating voltage220V A/C, 50 HZ

Instrument size 370 W x 700 H x 630 D mm Net weight 45 Kgs



PROFILE PROJECTOR

PROFILE PROJECTOR TYPE VW 800

VW 800 is a very simple Profile projector. It isdesigned for use in Industries for measurement ofprecession components & is ideal for viewing theCharpy V Groove impact test specimens.

Magnifications 10x20x40x

Accuracy + - 1%Screen Fine ground glass.Dia. 200 mm

Rotatable 360 degrees.180 mm etched scale on X & Y axis LC 0.1 mm

Stage 125 x 125 mm Mechanical stage.X Micrometer 25 mm LC 0.01 mmY Micrometer 25 mm LC 0.01 mmEasy movement & adjustment

Illumination Transmitted light with One 12V 100WTungstan Halogen Lamp. The illuminationcan be increased or decreased

Focusing By Rack & Penion movement of Stage Operating voltage220V A/C50 HZ.

Instrument size 320 W x 600 H x 500 D mm Net weight 30 Kgs



SINGLE DISC POLISHING MACHINE PL-1

OVERVIEW :

• For secondary surface preparation of metallurgical specimens in the laboratory, it is an effective & heavy duty machine with variable speed for polishing specimens for microscopic analysis.• Both polish paper & polishing cloth can be clamped on rotating disc, provision for water flow & control.

FEATURES :

• Speed – Continuously variable upto 3000 RPM Maximum.



• No. of Disc – One• Disc diameter – 20 cms• Power supply – Single Phase, 220 VAC, 50 Hz.• Drive Motor – 0.5 HP with Variable frequency drive.

• Dimensions - L51XW35XH36 cms.

METALLURGICAL MICROSCOPEvertexmachines.com/SinglePDF/Metallurgical SinglePDF.pdf · 2019. 12....

Documents

Transcript of METALLURGICAL MICROSCOPEvertexmachines.com/SinglePDF/Metallurgical SinglePDF.pdf · 2019. 12....