METAL PRODUCTS Contour Series ... - Taylor Metal...Taylor Metal Products, Inc. delivers using diesel...

Contour Series™Installation Guide

TAYLORM E T A L P R O D U C T S

�YLOR METAL PRODUCTS

Contour Series

Table of Contents

NOTES TO DESIGNER/INSTALLER ............................................................ pg. 3-4

DELIVERY .................................................................................................... pg. 5

16" PROFILES ............................................................................................. pg. 6

12" PROFILES............................................................................................. pg. 7

LAP WITH SPLICE PLATES ......................................................................... pg. 8

LAP WITH REVEALS ................................................................................... pg. 9

BASE FLASHING ......................................................................................... pg. 10

WALL TERMINATION ................................................................................ pg. 11

OUTSIDE CORNER ..................................................................................... pg. 12

INSIDE CORNER ......................................................................................... pg. 13

HORIZONTAL & VERTICAL REVEAL. ........................................................ pg. 14

DOOR/WINDOW HEAD ............................................................................ pg. 15

DOOR/WINDOW JAMB ........................................................................... pg. 16

Contour Series™ gives you the custom look you want within your budget. If one of our standard profiles does not match your design requirements, no problem, TMP will fabricate the profile that matches your projects needs – not ours. Contact us so we can help fulfill your vision of the perfect look.

Contour panels are available in a wide variety of “Cool” baked on Kynar® colors, Rusteel Plus™ (A606), Copper and .032 Kynar 500® Painted Aluminum.

34"

16" COVERAGE

11116"

114"

S.O. 2414"

34"

1618" COVERAGE

51116"

114"

S.O. 2212"

34"

1618" COVERAGE

11116"

514"

S.O. 2212"

34"

16" COVERAGE

138"

21516"

114"

S.O.24716"

12" COVERAGE

114" OR 11

2"

2"

11516"

114" OR 11

2"

12" COVERAGE

6"

11516"

2"

114" HEIGHT S.O.: 211

2" 112" HEIGHT S.O.: 213

4"

114" OR 11

2"

12" COVERAGE

6"

114" HEIGHT S.O. 191

16" 112" HEIGHT S.O. 195

16"

FEATURED PROJECT: C-5 Panel | Oregon State - Cascades | Bend, OR

4 // TAYLOR METAL PRODUCTS

Contour Series™ C-1 to C-8

C-1

C-2

C-3

C-4

C-5

C-6

C-7

C-8

12" COVERAGE

114" OR 11

2"

4"

11516"

114" HEIGHT S.O. 211

2" 112" HEIGHT S.O. 213

4"

Kynar 500

Commercial-grade metal primer

G-90 galvanizing

24 or 26 guage steel

G-90 galvanizing

Commercial-grade metal primer

Corrosion resistant primer

WWW.TAYLORMETAL.COM // 5

SPECIAL KEY FEATURES Contour Series™ C-1 to C-8

2’ to 20’6” panel lengths

3/4”, 1-1/4” and 1-1/2” depths

Clip systems available – flush mount and high performance standoff clip (required for 18-20 gauge)

Air and Water Infiltration Testing ASTM 283, 330 and 331

Custom profiles available

Contour Series™ is available in 20 standard colors, 5 Metallic Colors and 4 Specialized Colors

Kynar 500® Paint System - the ultimate in exterior durability and color retention

“Cool” color pigments are specifically designed to reflect infrared light, reducing heat gain to dwelling, and conform with ENERGY STAR® criteria

Superior quality, two-coat, 70% resin finish, applied at 1mm thickness

40 year residential paint warranty

20 and 30 year commercial paint warranty(Contact TMP for warranty specifications)

Kynar 500® paint layerCommercial-grade metal primerG-90 Galvanized or AZ-50

Base Steel

G-90 Galvanized or AZ-50Commercial-grade metal primerCorrosion resistant wash coat



Notes to Designer /Installer

Contour Series

Notes to Designer/Installer

Taylor Commercial Products is providing the following details as an aid in design. The details in this guide are not inclusive to all design situations. The designer /installer is responsible for modifications and should take into consideration all aspects of the project including climate conditions, such as, snow and wind, as well as, building code requirements, building design, building usage and maintenance requirements.

Installation should be performed only by qualified installers familiar with metal siding systems and industry standards. For details not shown in this guide, refer to the Sheet Metal and Air Conditioning Contractors National Association (SMACNA) architectural sheet metal manual for proper design.

The Standard gauge for all products in this guide is 24 gauge and the standard finish is Kynar 500®/Hylar 5000®. We recommend specifying all flashings be the same gauge, color, and finish as the panels to insure long-term durability and color match.

Substrates Details in the manual are all shown over solid substrate. Contour can be used over

spaced purlins no greater than 24" apart.

For solid substrate, Taylor Commercial Products recommends 5/8" plywood.

Underlayments Minimum underlayment requirements are 30 lb. ASTM rated felt, a synthetic underlayment with Class A fire rating and ASTM UV protection technology or a high temperature self-adhering rubberized membrane. When choosing the underlayment, consider the roof slope, roof design, roof panel, and the climate.

Oil Canning Flat metal surfaces will display waviness commonly referred to as "oil canning". Oil canning is caused by a variety of conditions. Steel mill tolerances, variations in or uneven substrates and roofing underlayment's. Oil canning is a characteristic of metal siding, not a defect and is not a cause for rejection.

Thermal Movement The Panels and the flashings must be allowed to expand and contract, especially with longer length panels. The panel may need to have a slight gap where the panel hooks the offset cleat to allow for thermal movement of the panels.

3


Handling / Storage & Safety

Contour Series

Handling/Storage/Safety

Handle materials with care when off-loading or moving materials to avoid damage to panels or flashings. Long panels may require two or more pick-up points, properly spaced to avoid damaging panels. Plan ahead; contact Taylor Commercial Products for recommendations on handling/hoisting long panels.

Store the panels, flashings and accessories in a dry, well ventilated area, off the ground. If covering, allow ventilation around panels. Elevate one end of bundle to allow drainage of wet materials.

Take care when painting to avoid getting over spray on the siding material. Remember that wind can carry paint particles some distance. Over spray can cause the finish of the roofing material to look dull and may void your warranty.

Secure materials, especially when leaving the site, on the ground or roof to prevent winds from moving the materials. Wind-blown materials may cause damage to the material, property or persons.

Always use proper safety equipment and attire to minimize risk of cuts or other injuries.

Avoid installing metal panels in windy conditions.

Safety considerations are the responsibility of the installer and his crew. Be sure to use common sense and generally accepted safety practices when installing roofing material.

4

Delivery and Will Call

Delivery PolicyTaylor Metal Products, Inc. delivers using diesel trucks with 5th

wheel, low-boy flat bed trailers. Overall combined length can

be as long as 65 feet. Our fleet includes trucks, with and without

knuckle cranes, and a variety of trailer sizes to assist in deliveries.

We will make every effort to accommodate requests for a specific

delivery mechanism but we cannot guarantee availability of

specific resources.

We will make every attempt to deliver material to the desired

location. We may be unable to gain access on tight corners or

steep terrain. If the site is deemed inaccessible by our driver,

the customer may choose an alternate delivery site within a

reasonable proximity. If we are unable to make the delivery,

additional charges may be assessed.

The customer is responsible for:

• Determining adequate access for delivery ahead of time.

• Meeting the delivery at the agreed upon time.

• Any balance owing on C.O.D invoices.

• Providing adequate resources (1-4 people as needed) for off-

loading materials.

• $35 per half hour charge if delivery takes longer than one-

hour.

Delivery times are usually scheduled one day in advance. Taylor

Metal Products will make every effort to make the delivery at the

scheduled time. Please be aware that there may be conditions

beyond our control such as traffic, mechanical failure, road

closures, etc. which may affect our schedule.

Will Call and Loading PoliciesFlat bed trailers and trucks are best suited to transport metal

roofing materials. These can be loaded from the side with a

forklift and tied down in a safe and secure manner.

We are not able to load materials onto vehicles and/or

trailers which are not suitable or may be hazardous to load.

Please be aware that if we find a vehicle to be inappropriate,

we reserve the right to refuse to load your order.

Examples are: boat trailers, vans,

buses, motor homes, campers and box

trailers. Pickup racks which do not have

sufficient supports for the weight or are

not long enough to support bundles

are also unacceptable.

Taylor Metal Products is not responsible to tie down loads

nor do we provide any tie down materials. Please bring

tie downs to secure your load (string or twine are not

acceptable for this purpose.) We do offer a delivery service at

reasonable rates to accommodate the customer who needs

the materials delivered to an accessible job-site.

Please see our delivery pricing pages for more

information.

5


1: • I 1 1)16

C1 L ' '

I• 5 1Xs

C2 L

1- • I 1 1)16

C3 L ' 1-

16

' ' I•• I � ¼

•I

' ' I•• I � ¼

'

5¼ •I

' '

'

Contour Series

Panels: 16"

·1_l

' t

_l '

t

_l

t

¾

¾

¾

C4

8

2 15

6


r. --12----1·1�2 --1 -- 2--i

cs L I I I I

I• 6-�• 1�-- 2 .. I .. 2--i

C6 L I I

I• 6---6 •I

C7 L

CB L I I

Contour Series

Panels: 12"

7


12" backer plates set in 2 beads of-� non-skinning butyl

Contour Series

Panel Lap

8


"j> I

I

I

• 13.1

C:3::J Double J

�3� T-Trim

Contour Series

Reveal Lap

! 1 � Reveal may varie per projectDouble J with backer design

I

I

I

9


HORIZONTAL

----- OFF SET CLEAT

------ SCREW 12• OC .--- SIDING PANEL --- BASE FLASHING

VERTICAL

�-- SIDING PANEL --- BASE FLASHING

Contour Series

Base Flashing

4

l____,,, D

4

l____,,,

10


<I

·4;

<I

. 4;

•LJ

<I

4 .

. .

. .

<I

4. A

4

4

<I

•LJ

<I

4 .

. .

. .

<I

4.

4

<I

A

4

HORIZONTAL

SIDING PANEL

C-CASING

PAN HEAD SCREW

VERTICAL

...__--SIDING PANEL

Contour Series

Wall Termination

3--J

1 i

3

1 i

----C-CASING WITH WATER BACK HEM

----PAN HEAD SCREW

"----NON-SKINNING BUTYL TAPE

'-----NEOPRENE WASHERED SCREW AT EACH LAP

11


HORIZONTAL

'-----SIDING PANEL

Contour Series

Outside Corner

----C-CASING WITH WATER BACK HEM ---NEOPRENE WASHERED SCREW AT EACH LAP ---OUTSIDE CORNER

VERTICAL

'-----SIDING PANEL CUT TO FIT ----NON-SKINNING BUTYL TAPE

----NEOPRENE WASHERED SCREW AT 12" OC ----PAN HEAD SCREW 12" OC

OUTSIDE CORNER

12


Contour Series

Inside Corner

HORIZONTAL

LSIDING PANEL ---C-CASING WITH WATER BACK HEM ---NEOPRENE WASHERED SCREW AT EACH LAP ---INSIDE CORNER

VERTICAL

---SIDING PANEL CUT TO FIT ---NON-SKINNING BUTYL TAPE

---NEOPRENE WASHERED SCREW 12• OC

PAN HEAD SCREW 12• OC ---INSIDE CORNER

13


HORIZONTAL

OFF SET CLEAT

SCREW 12• QC SIDING PANEL BASE FLASHING

VERTICAL

SIDING PANEL

BASE FLASHING

Contour Series

Vertical Reveal

r D4

l 1

H

r 4

l 1 �

14


HORIZONTAL

----- OFF SET CLEAT

�� Door/Window (other)

�� Door/Window (other)

-----SCREW 12• QC ....---SIDING PANEL ....---BASE FLASHING

.---TRIM

VERTICAL

-------OFF SET CLEAT

----- SCREW 12• QC _..---SIDING PANEL _..---BASE FLASHING ....---TRIM

Contour Series

Door/Window Head

D l._,

15


HORIZONTAL

l-3

VERTICAL

Contour Series

Door/Window Jamb

1�--

Vories per panel

------NEOPRENE WASHERED SCRW 12• OC -----BUTYL TAPE -----VERTICAL SIDING PANEL

��ASING

�;;��31;.:� ------PAN HEAD SCREW

4

16


HORIZONTAL

OFF SET CLEAT

SCREW 12• QC SIDING PANEL BASE FLASHING

VERTICAL

SIDING PANEL

BASE FLASHING

Contour Series

HORIZONTAL/VERTICAL

REVEAL

r D4

l 1

H

r 4

l 1 �

17

Custom Trim Order

Customer Name: _______________________________ Job Name: ________________

Please provide a drawing for each flashing with precise measurements and anglesFax to: 503-581-6877

Drawing #:___ Pitch: ______ # of Pieces: ___________

Description:____________________________________

Hems: Open Closed Slightly Open


Description:____________________________________



Description:____________________________________



Description:____________________________________


4566 Ridge Dr NE Salem OR 97301 • Phone: 503-581-8338 or 1-800-574-1388 • www.taylormetal.com

Order Form New Order Add-on Order

Fax to: 503-581-6877

Sold To:

Order Contact:

Job Name:Ship To:

Phone #Fax # Will Call Delivery Date:

Panels with * need Pattern Choice Color:

Soffit*GR7

Ribs Flat Pitch:

Smoothwall*GR5

Striations Gauge

T-3PBR 12-3/4" MS150*

Notched? Y N

Tuff Rib2-1/2" Corrugated 16-5/8" MS150*

Classic 7/8" Corrugated 18" MS200*

*All Kynar, Easy-Lock, Soffit, & Smoothwall, Clip Lock, MS150, Versa Span, MS200 flashings are 10'*All Armor Tech 26 and 29 Gauge. StreamLine, T-3, Tuff Rib, GR7, PBR, Corrugated, & GR5 flashings are 12'6"

Quantity Quantity

Forgetting Anything?Underlayment? Screws? Clips?

Pattern Choices:

14-5/8" Versa Span*

18" Versa Span*

Panel & Flashing Items

Length Item Description Length Item Description

4566 Ridge Dr NE · Salem, OR 97301 · F:503-581-6877 · P503-581-8338 · www.taylormetal.com

Caulking? Closures?

PO# Date:

Inside Sales:

16" Easy-Lock*16" StreamLine*

Shadow Line*HR-34

Marion ‘R’ Panel12" Easy-Lock*

StriationsFlat

Ribs14-5/8"MS200*

Clip Relief? Y N Sealant? Y N Notched? Y NPattern Choices:

RIVERSIDE BRANCH 4880 Felspar St.

Riverside, CA 92509

Office: 323-407-7457Toll Free: 1-877-504-1594

SALEM BRANCH4566 Ridge Drive NE

Salem, OR 97301

Office: 503-581-8338Toll Free: 1-800-574-1388

Fax: 503-581-6877

WOODINVILLE BRANCH5927 234th St. SE

Woodinville, WA 98072

Office: 425-485-3003Toll Free: 1-800-574-1388

Fax: 425-485-2710

AUBURN BRANCH710 A St. NW Suite 101

Auburn, WA. 98001

Office: 206-900-9923Toll Free: 1-800-574-1388

Fax: 253-804-3545

MCCLELLAN BRANCH5711 Perrin Ave

McClellan, CA. 95652

Office: 916-318-8844Toll Free: 1-800-574-1388

Fax: 916-993-4123


QUALITY PRODUCTSEXCEPTIONAL SERVICE

Contour Series ™ Installation Guide - © 2018 Taylor Metal Products

METAL PRODUCTS Contour Series ... - Taylor Metal...Taylor Metal Products, Inc. delivers using diesel...

Documents

Transcript of METAL PRODUCTS Contour Series ... - Taylor Metal...Taylor Metal Products, Inc. delivers using diesel...