MET Mark - Unique Selling Proposition · MET Labs Take your products to market fast and easy with...
Transcript of MET Mark - Unique Selling Proposition · MET Labs Take your products to market fast and easy with...
Tagline for the concerned Business LIne
MET Labs
Take your products to market fast and easy with Eurofins | MET Labs
IBTTA NC APRIL 24 PRESENTATION
USING TECHNOLOGY AND INNOVATION TO REDUCE THE COST OF TOLL TESTING
- 1 -
Ted Osinski Director, Emerging Technologies MET Laboratories [email protected] Member of OmniAir Board
MET Labs
Take your products to market fast and easy with Eurofins | MET Labs
Certify the World, One Product at a Time….
Types of Tests:
Regulatory, Environmental,
Conformance, Tag Data Sheet, Performance (both lab and field).
OmniAir Accredited for Tolling Certification
Using Technology and Innovation to reduce the cost of toll testing
- 2 -
MET Labs
Take your products to market fast and easy with Eurofins | MET Labs
Technology
Conformance Testing
• Foundational Test!
• Good predictor for device performance!
- 3 -
• Protocols: 6C, TDM, 6B/SeGO
• Applicable to tag and reader
• Test radio and commands/parameters
• Interference avoidance, memory reads and writes …and many other tests
• Strict tolerances (for wave masks, response times)
MET Labs
Take your products to market fast and easy with Eurofins | MET Labs
Technology
Standardized Tag Data Sheet ….based on GS1 Tag Performance Parameters Test Methodology
• Similar to new car window sticker
• Allows you to objectively compare tags
- 4 -
Parameter Min Typical Max Units
41 Read range 9.7 15.05 20.1 meters
34 Tag Sensitivity 0.5 0.72 1.2 V/m
44 Backscatter range 15 24. 33.0 meters
Parameter Min Typical Max Units
41 Read range 9.7 15.05 20.1 meters
34 Tag Sensitivity 0.5 0.72 1.2 V/m
44 Backscatter range 15 24. 33.0 meters
MET Labs
Take your products to market fast and easy with Eurofins | MET Labs
- 5 -
Innovation
Simulated Toll Testing (STT) Field Testing 1. Focus on edge test cases (such as stop-go) that can not be
simulated in a lab and migrate volume testing to a lab.
3. Evaluate tags based on performance (# of handshakes) rather then # of failures • Use sample based statistical models and reference
readers and/or tags • 300 runs needed to determine, with 99% probability,
that new tag performance is identical to reference tag
2. Ideal for volume testing for basic test cases • Based on Confidence Interval that at 80%
requires over 5514 runs with 3 failures • Tests for failures (no handshakes)
Benefits • Proven correlation to ORT • 1-lane STT available now, 3-lane in plans • Can do 100+mph test cases • Cheaper, safer, repeatable, available 24x7
MET Labs
Take your products to market fast and easy with Eurofins | MET Labs
- 6 -
Test Type Test Types & Notes
Regulatory FCC Part 15, 90
Environmental Temperature, Humidity, Vibration…
Conformance Automated test tools for ISO 18000-63, Part C, B , TDM Specifications
Tag Data Sheet Automated test tool based on GS1 Tag Performance Parameter Test Methodology
Performance (Lab) STT -Simulated Toll Test
• A surrogate for field testing (for some test cases, volume) • Multi-protocol tags and readers: 6C,TDM, 6B/SeGO, T21 • Speed 5 - 100mph+ • Application software that controls testing and captures results
Performance (Field) • Multi-protocol tags and readers: 6C, TDM, 6B/SeGO, T21 • Multi-lane, speed 5 - 85mph • Application software that controls testing and captures results
Testing Helps Make Right Decision