Merivaara Today -...
Transcript of Merivaara Today -...
Heavy duty operating table
with e cellent performance and e tra features
�
Merivaara manufactures all the core
equipment for the modern hospital of
today. The newest range includes the
PromeriX heavy-duty electro-hydraulic
operating table with several competitive
features.
Merivaara Today Concept aims to develop
solutions based on hospital needs to
meet the newest requirements of data
management, equipment/quality control
and efficiency. Merivaara is one of the few
manufacturers that cover all the range in
hospital furniture.
Data Management
Equipment/q
ualit
y co
ntro
l
Pat ient information
Transportation
Operation/examination lights
Patient Room
Examination
OperatingTheatreMaternity
Day Surgery
Emergency
Optima
Adatto Ada
Promerix
Practico
OP1650
4242
409
Emergo
Rapido
Merivaara Today
Transportation
Merivaara in Operating Theatre
Recovery
Operation/Examination Lights
Merilux Trio
RapidoPractico
Promerix
OP1650
Camera/Screen
AdattoEmergo
Emergo
�Merivaara in Operating Theatre
Modern Operating Theatre of todayToday’s operating theatre faces challenges in offering cost-efficient solutions taking into consideration all data
management and quality control demands of today. Operating tables and lights need to provide information to
OR-management softwares that again helps in planning quality control and patient information systems.
Merivaara has widened the range for operating theatre tables by developing the PromeriX heavy duty operating
table to meet the growing demands of modern operating theatres. Starting with open interfaces for OR-
management softwares and ways to communicate also through voice control systems this heavy weight still
mobile sliding table forms the basis for a successful and clean operation.
Besides the PromeriX Merivaara also produces basic reliable hydraulic and cost-efficient electro-mechanical as
well as day surgery tables to cover the whole range of tables needed in the hospital.
�
PromeriX is an easy-to-use mobile operating table, whose modular table top can be configurated to suit each
surgical procedure and patient in the best possible way. PromeriX’s electro-hydraulic adjustments are controlled
via user friendly hand- or foot control units or the new wireless IR remote control unit. The operating table is
ergonomic, easy to use and to maintain.
PromeriX has a special set-up for shoulder arthroscopy procedures. The detachable back rest, belt system and
steady head support make the use of the table practical and safe.
�
• Heavy-duty table with sliding function, max. load 275 kg (safe working load)
• The floor-lock system keeps the table stable with four hydraulic cylinders
• Modular construction and easy latching mechanism
• Pre-programmed positions: Flex, Reflex, Beach Chair and Level, plus M1 and M2 customer specific
programmable positions
• Several control options
• Battery operated table. Battery capacity is sufficient for one week’s operations
• PromeriX can also be used with the mains power with internal transformer/charger unit
• X-rays and C-arm requirements are totally fulfilled through right materials and wide sliding possibilities
• Ergonomic and easy to clean
Pre-programmed positions
Longitudinal shift “sliding” 410 mm
Normal / Reverse mode
Adjustable for your needs
Flex
Reflex
Beach Chair
Level (zero position)
�
Seat-section
25-section 40-section
40 gynecological-section25-section
Head-rest
25-section(extension)
Divided leg section with dual-joint abduction
Easy detachable table top
• Simple construction
• Unique latching mechaniscm
• Ergonomic for nursing staff - light and easy to change the table construction
• Optimal size and weight
• Modular construction: table top consists of sliding seat section and detachable 25- and 40- sections, which
can be rearranged depending on needs.
• Comfortable and soft, moulded IS-mattress, 65 mm
40-sectionENT head-rest18150 ENT upper back section
25 gynecological-section
�
Seat-section
40 gynecological-section 25-section
Head-rest
25-section(extension)
40-section 25-section
Head-rest with double articulation
Modular construction
Divided leg section
• Divided leg section with dual-joint abduction, powered left and right separately or parallel
• Firm and easy-to-use construction
• Ergonomic for nursing staff and patient
Beach chair- back rest
25-short section
Reverse mode
Normal mode
�
Maximal sliding & stability
Standard operating table mattress.
�0 mm visco-elastic (memory) foam mattress.
Optional 80 mm mattress The memory foam mattress is made of combination of normal
- and visco-elastic (memory) foam to guarantee maximum
patient safety and comfort. The memory foam mattress forms
according to the body temperature and patient. The antistatic
polyester-polyurethane upholstery with Sanitized®-treatment
is resistant against bacteria and fungus (Staphylococcus
Aureus + MRSA, Penicillium funicolusum). The upholstery
is breathable, washable, bi-elastic and has welded seams.
This special mattress prevents pressure sores and numbing.
The maximum pressure will be reduced - �� … - �� %, the
mean pressure - �0 … - �0 % and mattress area supporting
the patient will be increased by +�� …+ �0 % depending on
patients weight and body shape.
• PromeriX operating table is for heavy duty use - the maximum safe working load is ��� kg
• Electro hydraulic table for general and special fields of surgery
• Modular construction with lightweight and quick detachable table sections offers ease of the use
• Normal and reverse mode, stable construction
• Comprehensive range of accessories
�
Clear and logical control devices
• Hand Control with cable
• IR-Hand control
• Foot Control
- height, Trendelenburg, lateral tilt
• Override-panel in the column
- hard wired functions
- table can always be controlled without
normal control devices
User friendly, logically-designed hand control units
• Back light function
• LED-diagnostic lights for:
- Patient orientation
- Table’s battery status
- Floor Lock status
- 5th wheel status
• Pre-programmed positions for:
- Flex, Reflex, Beach Chair, Level
- M1 + M2 customer specific programmable
positions
PC Software (for service and upgrades)
• USB-connection to PC
• Virtual hand set
• Software upgrades
• Setting the parameters
• Setting the pre-programmed positions
• Diagnostics
Modern features for practical use
1. Lithotomy position (high)
2. Ophtalmic surgery, ENT-surgery
3. ENT-surgery, struma position
4. Urology
1
2
4
3
10
5
6
8
5. Laparoscopic surgery
6. Lithotomy position (low)
7. ENT-surgery
8. General surgery
7
11Multi-purpose table for all procedures
Laparoscopic surgery
1
2
3
4
1�
1. Neurosurgery
2. Neurosurgery
3. Spine- and disk surgery
4. Lateral position
8
7
6
5
1�
Kidney- thorax surgery
5. Hand surgery
6. Beach Chair position, Shoulder arthroscopy
7. Laparoscopy surgery, MIS surgery
8. Orthopedic surgery with extension device
Multi-purpose table for all procedures
1�
Base, Castors and Floor Lock:
• Four strong double castors to carry the table and
the patient
- easy to move
• Reliable electro-hydraulic Floor Lock with four
cylinders
- stable locking to desired location in operating
room
• Optional fifth wheel
Power supply:
• Battery operated operating table
- Large battery capacity
- Enough up to one week’s operations
• Mains power use
- Table can be used during charging
procedure
Override-panel in the column:
• Full hardwired override for: Height, Trendelenburg,
Lateral Tilt, Back, Leg and Floor Lock
• Diagnostic LED-lights for: Patient Orientation,
Battery Status, Floor Lock and 5th wheel
IR - Infrared control:
• IR-wireless hand control device
• Back light function
• 64 different codes for different tables
• Easy coding of the hand set according to the table
trend 35
1�
Table top 6-sections (standard version)
Length of table top 2100 mm
Table top width without rails 540 mm
Table top width with rails 594 mm
Weight 325 kg
Floor clearance 25 mm
Castors Ø 125 mm
Safe working load 275 kg Normal-mode
Primary Voltage 100 - 240 V ~
Frequence 47 - 63 Hz
• Quality certificates: ISO 9001, ISO 13485, ISO 14001:2004
• The design is compliant with SFS-EN 60601-1, IEC 601-2-46 and IEC
601-1-2 standards
• PromeriX is classified into the class I according to European Council
Directive 93/42/EEC Class I (Annex IX)
Technical features
Adjustment ranges
Height 650 ... 1110 mm
Trendelenburg /
reverse Trendelenburg adjustments - 35º ... + 35º
Lateral tilt - 25º ... + 25º
Back section - 45º ... + 80º
Leg section - 105º ... + 70º
Head section - 45º ... + 45º
Longitudinal shift 410 mm
Pre-programmed positions 1 + 3
Customer specific programmable
positions (M1, M2) 2
Height 650 -1110 mm
Leg section - 105º ... + 70º
Back section - 45º ... + 80º
Head section - 45º ... + 45º
Length of table top 2100 mm
Trendelenbug adjustments +- 35º
Lateral tilt +- 25º
Longitudinal shift 410 mm
Table top width 540 mm
N-P
aino
Oy
11/
�00�
�00
0 R
ight
s to
mod
el a
nd s
truc
tura
l cha
nges
res
erve
d.