MergedFile - Multico Equipment Services Sdn Bhd · and productivity of a Bobcat telescopic handler,...
Transcript of MergedFile - Multico Equipment Services Sdn Bhd · and productivity of a Bobcat telescopic handler,...
1
2
3
T2250: the three-in-one special!
n Not your average machine
With the T2250, you get the capabilities
and productivity of a Bobcat telescopic
handler, skid-steer and articulated loader –
from one exceptionally versatile machine!
Loading tradition in a compact
package
Only 1.95 m high and 1.83 m wide, the
T2250 is as compact and manoeuvrable
as our skid-steer loaders, with the
capacity of a larger machine.
Versatility
Thanks to our Bob-Tach™ system, the
T2250 is compatible with most Bobcat
loader attachments.
Agile as an articulated loader
The 3 steering modes – front wheel,
4-wheel or crab-steer – let you go
anywhere.
With the optional boom fl oat,
the boom and attachment can
smoothly follow uneven surfaces.
And the panoramic view from the
cab off ers 360º visibility, for greater
safety and speed.
All the reach of a telescopic handler
• Lift and load: with the T2250, you can lift
2.2 tons up to 5.2 m high.
• How far do you want to go? With a 1 ton
load, the T2250 off ers a maximum reach of
3 metres.
2
148°
Compact telescopic loader
n Born to load
Not a compromise, but a combination. This machine
is equipped to tackle all your loading jobs…but with
greater reach and lifting height than any loader.
n Making fast work of tough jobs
The T2250's optimised 'Z' bar kinematics increases
bucket dumping and crowding angles, and improves
the bucket thrust when loading. Your overall operation
is quicker and the breakout force is optimised.
Standard, fully
proportional joystick
All movements are proportional and can be combined, thanks to our load sensing system.
Simultaneous two foot
drive
Keep 100% control when loading with one foot on the throttle and one foot on the inching pedal. The inching pedal slows forward movement without changing engine speed.
Combining comfort and effi ciency
n All the features you need
• Reinforced undercarriage for greater robustness
• Attachment Control Device (ACD) for joystick control
of certain attachments
• Creep mode is standard!
It enables low travel speed at high engine rpm, so
you always have suffi cient hydraulic fl ow to operate
attachments such as sweepers or feeding buckets.
n 360° visibility
For better productivity and safety
With the engine located on the side of the machine, the
T2250 off ers 360° visibility from the cab. This design also
ensures easier access for routine maintenance.
n Easy service and
greasing
• Ready access to all
key components
• No special tools
required.
The operator can drive the machine in creep mode while maintaining full engine speed.
1 2 3 4 5
6 7 8
9
1
2
3
4
5
6
7
8
9
n Flexibility
Our quick-attach systems let you switch attachments at
a moment’s notice.
Our manual solutions:
• Bob-Tach™
• Quick-Tach
Optional – change attachments without even leaving
your cab:
• Hydraulic Quick-Tach.
Versatile as a Bobcat loader
Pallet Forks Box Blade
Landscape Rake
Brushcat™ Rotary Cutter
Bale Spike
Trencher
Auger
Vibratory Roller
Snow Blade
Snow V-Blade
Scraper
Snowblower
Dozer Blade
Combination Bucket
Sweeper
Crane Jib
Extension Jib
Landplane
Angle Broom
Fork with Grapple
Tiller
Bale Squeeze Handler
Bucket with Grapple
Mower
Bobcat EMEA - Drève Richelle 167 - B-1410 Waterloo, Belgium
T2250
PerformanceLifting height (Bob-Tach™) 5230 mmLifting height (Quick-Tach) 5210 mmRated capacity 2200 kgCapacity at max. height 2200 kgCapacity at max. reach (Bob-Tach™) 1000 kgCapacity at max. reach (Quick-Tach) 950 kgMax. reach (Bob-Tach™) 3010 mmMax. reach (Quick-Tach) 3030 mmCrowding force 2100 daNWeightsWeight (unladen) 4695 kgTractionStandard tyres 14x17.5Low speed (forward/reverse) 7 km/hHigh speed (forward/reverse) 25 km/hDriving modes Direct drive / soft driveDrive SystemTransmission Hydrostatic with electronic regulationMain drive 2-speed hydrostatic motorEngineMake / Model KUBOTA / V3800-DI TurboFuel / Cooling Diesel / LiquidRated power (DIN 6271) at 2400 RPM 55.9 kW (75 HP)Maximum torque at 1600 RPM 274 NmNumber of cylinders 4Displacement 3.8 lHydraulic SystemPump type Gear pump with LS valveCombined pump capacity 85 l/minWorking pressure 240 barCycle TimeLift time - no load 4.7 sLower time - no load 6.5 sTelescope in time at max. reach - no load 4.2 sTelescope in time at max. height - no load 4.2 sTelescope out time at max. reach - no load 5.7 sTelescope out time at max. height - no load 5.8 sBrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic commandFluid CapacitiesAxles and reduction gears front / rear 8.9 / 5.6 lEngine oil 12 lFuel tank 91 lHydraulic reservoir (hydraulic / overall) 29 / 44 lStandard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSeat with self retracting seat belt
QuicktachFront and rear work lights on cabCreep function ( or SMS: Speed management system)
OptionsBack-up alarmAir conditioningRotating beaconRear hydraulic auxiliaryBoom lightSet of blue lights for hen housesCarriage with hydraulic attachment lockRoof window wiper
Protective grill for windscreenTransmission lock overrideFloat functionBob-Tach™Hydraulic line at boom end with ACDRear pin-type hitchBoom stop
Load ChartsWith forks and 14 x 17.5 tyres, with Bob-Tach™
12
50
kg
17
50
kg
22
00
kg
10
00
kg
15
00
kg
20
00
kg
3 2 1 0 m 147
6
54,994,82
4,52
4,064
3,35
3
2
1
0 m0,20
-1
7
6
5
5,25
4
3
0,5
2
0 m
-1
2,1
8
1,8
8
1,5
51
,36
1,0
1
0,2
7
3 2 1 0 m 14
3,0
1
2,7
52
,56
2,2
0
1,9
21
,71
1,5
6
1,0
6
Complies with stability test EN1459 Annex B.Dimensions
FE
I
JK
B
C
MLP
Q
P
Q
R
S
T
U
D
N
A
G
O
(A) 5330 mm(B) 4145 mm(C) 3984 mm(C) 4000 mm(D) 3585 mm(E) 2185 mm(F) 1985 mm
(G) 148°(I) 1553 mm(J) 430 mm(K) 294 mm
(M) 2300 mm(O) 860 mm(P) 1485 mm(Q) 1840 mm(R) 4280 mm(S) 3170 mm(T) — mm(U) 1500 mm
PerformanceLifting height (Bob-Tach™) 5230 mmLifting height (Quick-Tach) 5210 mmRated capacity 2200 kgCapacity at max. height 2200 kgCapacity at max. reach (Bob-Tach™) 1000 kgCapacity at max. reach (Quick-Tach) 950 kgMax. reach (Bob-Tach™) 3010 mmMax. reach (Quick-Tach) 3030 mmCrowding force 2100 daNWeightsWeight (unladen) 4695 kgTractionStandard tyres 14x17.5Low speed (forward/reverse) 7 km/hHigh speed (forward/reverse) 25 km/hDriving modes Direct drive / soft driveDrive SystemTransmission Hydrostatic with electronic regulationMain drive 2-speed hydrostatic motorEngineMake / Model KUBOTA / V3800-DI TurboFuel / Cooling Diesel / LiquidRated power (DIN 6271) at 2400 RPM 55.9 kW (75 HP)Maximum torque at 1600 RPM 274 NmNumber of cylinders 4Displacement 3.8 lHydraulic SystemPump type Gear pump with LS valveCombined pump capacity 85 l/minWorking pressure 240 barCycle TimeLift time - no load 4.7 sLower time - no load 6.5 sTelescope in time at max. reach - no load 4.2 sTelescope in time at max. height - no load 4.2 sTelescope out time at max. reach - no load 5.7 sTelescope out time at max. height - no load 5.8 sBrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic commandFluid CapacitiesAxles and reduction gears front / rear 8.9 / 5.6 lEngine oil 12 lFuel tank 91 lHydraulic reservoir (hydraulic / overall) 29 / 44 lStandard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSeat with self retracting seat belt
QuicktachFront and rear work lights on cabCreep function ( or SMS: Speed management system)
OptionsBack-up alarmAir conditioningRotating beaconRear hydraulic auxiliaryBoom lightSet of blue lights for hen housesCarriage with hydraulic attachment lockRoof window wiper
Protective grill for windscreenTransmission lock overrideFloat functionBob-Tach™Hydraulic line at boom end with ACDRear pin-type hitchBoom stop
Load ChartsWith forks and 14 x 17.5 tyres, with Bob-Tach™
12
50
kg
17
50
kg
22
00
kg
10
00
kg
15
00
kg
20
00
kg
3 2 1 0 m 147
6
54,994,82
4,52
4,064
3,35
3
2
1
0 m0,20
-1
7
6
5
5,25
4
3
0,5
2
0 m
-1
2,1
8
1,8
8
1,5
51
,36
1,0
1
0,2
7
3 2 1 0 m 14
3,0
1
2,7
52
,56
2,2
0
1,9
21
,71
1,5
6
1,0
6
Complies with stability test EN1459 Annex B.Dimensions
FE
I
JK
B
C
MLP
Q
P
Q
R
S
T
U
D
N
A
G
O
(A) 5330 mm(B) 4145 mm(C) 3984 mm(C) 4000 mm(D) 3585 mm(E) 2185 mm(F) 1985 mm
(G) 148°(I) 1553 mm(J) 430 mm(K) 294 mm
(M) 2300 mm(O) 860 mm(P) 1485 mm(Q) 1840 mm(R) 4280 mm(S) 3170 mm(T) — mm(U) 1500 mm
Spec
ifica
tion
s an
d d
esig
n ar
e su
bje
ct to
ch
ang
e w
ith
out n
otic
e. P
ictu
res
of B
obca
t pro
du
cts
may
sh
ow o
ther
than
sta
nd
ard
equi
pm
ent.
Specifications
©2009 Bobcat EMEA 4472580-EN (09-09)
PerformanceLifting height (Bob-Tach™) 5230 mm Lifting height (Quick-Tach) 5210 mm Rated capacity 2200 kg Capacity at max. height 2200 kg Capacity at max. reach (Bob-Tach™) 1000 kg Capacity at max. reach (Quick-Tach 950 kg Max. reach (Bob-Tach™) 3010 mm Max. reach (Quick-Tach) 3030 mm Crowding force 2100 daN
WeightsWeight (unladen) 4695 kg
TractionStandard tyres 14x17.5 Low speed (forward / reverse) 0–7 km/h High speed (forward / reverse) 0–25 km/h Driving modes Direct drive / soft drive
Drive SystemTransmission Hydrostatic with electronic regulation Main drive 2-speed hydrostatic motor
EngineMake / Model KUBOTA / V3800-DI Turbo Fuel / Cooling Diesel / Water-cooled Rated power (DIN 6271) at 2400 RPM 55.9 kW (75 HP) Maximum torque at 1600 RPM 274 Nm Number of cylinders 4 Displacement 3.8 l
Hydraulic SystemPump type Gear pump with LS valve Combined pump capacity 85 l/min Working pressure 240 bar
Cycle TimesLift time - no load 4.7 s Lower time - no load 6.5 s Telescope in time at max. reach - no load 4.2 s Telescope in time at max. height - no load 4.2 s Telescope out time at max. reach - no load 5.7 s Telescope out time at max. height - no load 5.8 s
BrakesEngine braking Hydrostatic Parking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 8.9 / 5.6 l Engine oil 12 l Fuel tank 91 l Hydraulic reservoir (hydraulic / overall) 29 / 44 l
Standard FeaturesAggravating Movements Arrester (AMA) Quick-Tach Hydrostatic transmission Front and rear work lights on cab ROPS/FOPS operator cab Creep function (or SMS: Speed Management System) Heating, demisting and ventilation Front and rear washer/wipers Seat with self retracting seat belt
OptionsBack-up alarm Protective grill for windscreen Air conditioning Transmission lock override Rotating beacon Float function Rear hydraulic auxiliary Bob-Tach™ Boom light Hydraulic line at boom end with ACD Set of blue lights for hen houses Hydraulic line at boom end with ACD Carriage with hydraulic attachment lock Boom stop Roof window wiper
Dimensions
Load Charts
With forks and 14 x 17.5 tyres, with Bob-Tach™
Complies with stability test EN1459 Annex B.
PerformanceLifting height 6957.0 mmRated capacity 3500 kgCapacity (at max. height) 3000 kgCapacity (at max. reach) 1500 kgMax. reach 4002.0 mmCrowding force 6200 daN
WeightsWeight (unladen) 7130 kg
TractionStandard tyres Standard 405/70x201st gear / low range (40 km/h option) 6 (6) km/h1st gear / high range (40 km/h option) 11 (12) km/h2nd gear / low range (40 km/h option) 16 (18) km/h2nd gear / high range (40 km/h option) 30 (40) km/h
Drive SystemMain drive Hydrostatic motor with 2 speed gearboxTransmission Hydrostatic with electronic regulation
EngineMake / Model PERKINS / 1104D-44TAFuel DieselCooling LiquidRated power (DIN 6271) at 2200 RPM 74.5 kWMaximum torque at 1400 RPM 410.0 NmNumber of cylinders 4Displacement 4.40 L
Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min
Cycle TimesLift time - no load 8.0 sLower time - no load 6.0 sTelescope in time at max. reach - no load 6.7 sTelescope in time at max. height - no load 6.7 sTelescope out time at max. reach - no load 7.1 sTelescope out time at max. height - no load 7.1 s
BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LEngine oil 8.50 LFuel tank 138.00 LHydraulic reservoir 59.00 L
Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signalsRight and left side mirrors
Two way hydraulic supply at the end of the boomMudguardsTurbo-charged engineNarrow hook-up for mounting of the equipmentMechanical lock of the equipmentJoystick with forward/reverse controlTransmission lock overrideWork lights on top of the cabStandard 405/70x20 tyres
OptionsAir conditioningAuxiliary line on boom witch ACD and electric connectorsBack-up alarmBasic tow hitchBlue lights for henhousesBoom lightBoom stopBoom suspensionCatalytic purifier mufflerCold startCustom colourCyclonic air prefilterDouble right rear view mirrorDrawbar coupler tow hitchFire extinguisherFront tow hitchGrammer air suspension seatHydraulically adjustable tow hook
Lockable fuel capManitou carriage with hydraulic attachment lockManually adjustable drawbar coupler tow hitchNo forward/reverse control on joystickPintle tow hitchProportional engine fan with inverterProtective grill for windshieldQuicktach carriage with hydraulic attachment lockRear auxiliary lineRear auxiliary line with hydraulically adjustable tow hookRear electric auxiliarySafety hammerSears air suspension seatSupport for vehicle registration plate with rear hydraulic hitchSupport for vehicle registration plate without rear hydraulic hitchTool boxTransmission 40 km/hWheel wedge
EnvironmentalLevel of acoustic power (LWA) 106 dB(A)
Load ChartsWith forks and standard 405/70x20 tyres
5
15
00
20
00
30
00
35
00
25
00
-1
0 m
1
2
3
4
5
6
7
8
-1
0 m
2
3
4
5
6
76,95
8
4 3 2 1 0 m -1
5 4 3 2 1 0 m -1
Complies with stability test EN1459 annex B
Dimensions
M
A
B
D
IF
J
R
U
S
P
Q
C
E
G
(-) 900.0 mm(A) 6074.0 mm(B) 4869.0 mm(C) 4763.0 mm(D) 4145.0 mm(E) 2561.0 mm(F) 2374.0 mm(G) 135°(I) 1752.0 mm(J) 430.0 mm
(L) 1356.0 mm(M) 2870.0 mm(N) 643.0 mm(O) 1013.0 mm(P) 1895.0 mm(Q) 2300.0 mm(R) 5015.0 mm(S) 3714.0 mm(U) 1092.0 mm
TL470 | Specifications
©2012 BOBCAT B 4473980-EN (03-12)
Spec
ific
atio
ns a
nd
des
ign
are
sub
ject
to c
han
ge
wit
hou
t not
ice.
Pic
ture
s of
Bob
cat p
rod
uct
s m
ay s
how
oth
er th
an s
tan
dar
d eq
uip
men
t.
www.bobcat.eu
2
HIGHER – STRONGER – BETTER…
The new 14m and 18m Bobcat® telescopic handlers provide you with what matters most – ease-of-use, safety and performance. Simplicity in design make these telescopic handlers easy to use. State-of-the-art safety systems and class-leading performance give you 100% confidence in the machine. The T40140 and T40180 work with the best possible efficiency and productivity, with a constant focus on safe operation.
Optimum Safety
Unique integrated frame-levelling and
side-shift system for use on both tyres
and stabilizers.
Full flexibility
A complete set of attachments provides
full flexibility and job compatibility.
Maximum uptime
Side-mounted engine
and easy-to- access
maintenance points
for fast service and
maintenance.
3
Total visibility
Rounded cab design
features large front
and rear windows to
maximise all-round
visibility.
Ergonomic comfort
Logically designed and positioned
controls provide greater comfort, control
and productivity.
Higher reach
Minimal loss of lift height between
operating on tyres and on stabilizers.
Compact stability
Compact stabilizers ensure full
capabilities can be used in even the
most confined areas.
4
An easy-to-use machine means better performance, higher productivity and, ultimately, safer operation. The T40140 and T40180 are models of simplicity, with a wide range of features.
SIMPLICITY
Ergonomics
The ergonomic controls are within arm’s
reach, providing an extra level of safety and
operational control.
• FNR control button on the joystick
• Electronic dashboard
• Adjustable steering wheel
• Integrated airflow solution
FNR on Joystick puts maximum control at your fingertips. Select
the driving direction at the touch of a button, while still keeping
a grip on both the steering wheel and the joystick for improved
safety and productivity.
Information at your fingertips
• Continuous frame-levelling angle on LCD display - when
levelling function is activated, the LCD screen automatically
shows the angle to keep you fully aware of machine
parameters.
• Boom angle value available on the LCD screen promotes
precision movements and faster work-cycles for repetitive tasks.
• Semi-automatic wheel alignment helps make sure the wheels
are always aligned when you change between the 3 steering
modes.
• Aux flow control is easily and precisely controlled from the
joystick.
• Stabilizer detection on ground - sensor continuously monitors
the pressure to prevent drops/leaks and ensure safe stab usage
at all times.
5
Spacious environment
The new cab is designed with the operator in mind. Providing an exceptional level of comfort to keep you more alert
and improve the safety of the work site.
Total visibility
The rounded cab design features a large front window to
maximise visibility of the attachment – at any height or reach.
Large rear window ensures maximum rear visibility, increasing
your spatial awareness and the accuracy of rear movements.
The design of the protective roof grid provides maximum
protection while ensuring that the attachment is visible at full
height.
6
CONFIDENCE… IN YOUR BOBCAT TELEHANDLERAttention to details … improving Quality, Reliability & DurabilityThe new T40140 and T40180 models provide a new level of confidence…in the machine’s performance and safety,
and in its robustness. This is achieved by applying the rigorous Bobcat® development standards across all functions
on the new models.
• New generation cooling package ensures smooth and stable
control of the hydraulic oil temperature and hydraulic hose life
optimisation.
• Complete protection of the tilt cylinder within the boom head
ensures minimum risk of damage and increased operator
safety.
• Integrated boom head design provides reinforcement to
handle heavy lifting while also providing added peace-of-mind
when operating from a man platform.
• New generation wear pads, larger bolts, larger steel inserts to
benefit from increased friction coefficient.
• Safe and smooth management of over-speed to ensure
maximum durability and uptime.
7
Safety
The load management system on the new
T40140 and T40180 ensures safe operation
at all times – regardless of the load.
The display – positioned for maximum
visibility – provides continuous clear
information on load management.
Side Shift
Unique integrated frame-levelling and side-
shift system works independent
of the main frame to provide ± 4° bank-
angle on tyres and up to ± 12° angle on
stabilizers. The system ensures maximum
flexibility and up to ± 700 mm side shift at
full extension.
8
PERFORMANCE… HOW TO MAKE THE GOOD EVEN BETTER!Compactness = access
Easy-to-use compact stabilizers ensure that
the T40180’s full capabilities can be used in
the most confined working areas.
3 steering modes provide a solution for any
movement.
You can easily manoeuvre into hard-to-
reach areas with the short turning radius.
9
Reaching higher than ever - both on tires
and on stabilizers.
We believe a high-reach machine should
not have limitations! The
T40180 provides top-class stability, ensuring
minimal loss of lift height and capacity
when operating on tires
With a top speed of 30 km/h, the new
models can quickly move between
locations, reducing travel times.
10
ENGINE
Maintenance
Improved serviceability: active monitoring of machine systems, with real-time information provided for diagnostics.
• Battery located in engine basket for easy access. Electric switch ensures that the battery is not accidentally left
connected overnight
11
T40140 T40180 — SPECIFICATIONS
T40180 3B TelescopicsSpecifications
B33G 11001 — B33G 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment
PerformanceLifting height — on stabilisers 17500.0 mmLifting height — on tyres 16200.0 mmRated capacity 4000 kgCapacity (at max. height on stabilisers) 2500 kgCapacity (at max. height on tyres) 1000 kgCapacity (at max. reach on stabilisers) 560 kgCapacity (at max. reach on tyres) 0 kgMax. reach on stabilisers 13700.0 mmMax. reach on tyres 12800.0 mmCrowding force 4900 daN
WeightsWeight (unladen) 10790 kg
TractionStandard tyres 400/80x24Low speed (forward/reverse) 8.5 km/hHigh speed (forward/reverse) 30.0 km/hDriving modes Direct drive / soft drive
Drive SystemMain drive Hydrostatic motorTransmission Hydrostatic with electronic regulation
EngineMake / Model DEUTZ / TCD 3.6 L4Fuel DieselCooling LiquidRated power (ISO 14396) at 2300 RPM 74.4 kWMaximum torque at 1600 RPM 410.0 NmNumber of cylinders 4Displacement 3.62 L
Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min
Cycle TimesLift time - no load 12.8 sLower time - no load 8.4 sTelescope in time at max. reach - no load 20.3 sTelescope in time at max. height - no load 17.7 sTelescope out time at max. reach - no load 29.0 sTelescope out time at max. height - no load 29.0 s
BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L
Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signals
Right and left side mirrorsTwo way hydraulic supply at the end of the boomMudguardsTurbo-charged engine - Perkins Stage 3ANarrow hook-up for mounting of the equipmentMechanical lock of the equipmentFour 400/80x24 tyresTransmission lock override
EnvironmentalSound pressure level (LpA) 79 dB(A)Level of acoustic power (LWA) 106 dB(A)Whole body vibration (ISO 2631–1) 0.29 ms-2
Load ChartsWith forks and standard 400/80x24 tyres, on stabilisers
Complies with stability test EN1459 Ennex B
Dimensions
(-) 16°(-) 109°(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm
OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDouble right rear viewmirrorDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel cap
Man platform predispositionMultifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready
T40140 3B TelescopicsSpecifications
B33H 11001 — B33H 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment
PerformanceLifting height — on stabilisers 13600.0 mmLifting height — on tyres 13300.0 mmRated capacity 4100 kgCapacity (at max. height on stabilisers) 4100 kgCapacity (at max. height on tyres) 2500 kgCapacity (at max. reach on stabilisers) 1250 kgCapacity (at max. reach on tyres) 500 kgMax. reach on stabilisers 9800.0 mmMax. reach on tyres 9800.0 mmCrowding force 5200 daN
WeightsWeight (unladen) 10290 kg
TractionStandard tyres 400/80x24Low speed (forward/reverse) 8.5 km/hHigh speed (forward/reverse) 30.0 km/hDriving modes Direct drive / soft drive
Drive SystemMain drive Hydrostatic motorTransmission Hydrostatic with electronic regulation
EngineMake / Model DEUTZ / TCD 3.6 L4Fuel DieselCooling LiquidRated power (ISO 14396) at 2300 RPM 74.4 kWMaximum torque at 1600 RPM 410.0 NmNumber of cylinders 4Displacement 3.62 L
Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min
Cycle TimesLift time - no load 12.8 sLower time - no load 8.4 sTelescope in time at max. reach - no load 12.9 sTelescope in time at max. height - no load 11.3 sTelescope out time at max. reach - no load 18.8 sTelescope out time at max. height - no load 18.8 s
BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LEngine oil 8.00 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L
Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signals
Right and left side mirrorsTwo way hydraulic supply at the end of the boomMudguardsTurbo-charged engine - Perkins Stage 3ANarrow hook-up for mounting of the equipmentMechanical lock of the equipmentFour 400/80x24 tyresTransmission lock override
EnvironmentalSound pressure level (LpA) 79 dB(A)Level of acoustic power (LWA) 106 dB(A)Whole body vibration (ISO 2631–1) 0.29 ms-2
Load ChartsWith forks and standard 400/80x24 tyres, on stabilisers
Complies with stability test EN1459 Ennex B
Dimensions
(-) 16°(-) 109°(A) 7313.0 mm(B) 6052.0 mm(E) 2670.0 mm(F) 2476.0 mm(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm(P) 1992.0 mm(Q) 2394.0 mm(R) 5720.0 mm(S) 3782.0 mm(U) 1761.0 mm
OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel capMan platform predisposition
Multifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear electric auxiliaryRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready
PERFORMANCEMaximum Lift Capacity kg 4100 4000
Maximum Lift Height (on tyres / on stabilizers) mm 13300 / 13600 16200 / 17500
Maximum Forward Reach (on tyres / on stabilizers) mm 9800 / 9800 12800 / 13700
Lift Capacity at Full Height (on tyres / on stabilizers) kg 2500 / 4000 1000 / 2500
Lift Capacity at Full Reach (on tyres / on stabilizers) kg 500 / 1300 0 / 560
Tilt Crowding Force daN 12300
WEIGHTSWeight (unladen) kg 10290 10790
ENGINEStage IIIA
Make / Model PERKINS / 1104D-44TA
Fuel / Cooling DIESEL / Water
Rated Power (ISO 14396) at 2300 RPM kW 74.5 (100)
Maximum Torque at 1600 RPM Nm 410
Number of Cylinders 4
Displacement l 4.4
TRACTIONStandard Tyres Basic Option Tyres 400/80-24"
Low Speed (forward / reverse) km/h 8.5
High Speed (forward / reverse) km/h 30
Driving Modes 2WS / 4WS / CRAB
DRIVE SYSTEM
Transmission Hydrostatic with electronic regulation
Main Drive Hydrostatic motor
HYDRAULIC SYSTEMPump Type Gear pump with LS valve
Combined Pump Capacity l/min 100
Working Pressure bar 255
BRAKESService Brake Oil immersed discs
Parking and Emergency Brake Negative brake with hydraulic command
DIMENSIONS
T40180 3B TelescopicsSpecifications
B33G 11001 — B33G 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment
PerformanceLifting height — on stabilisers 17500.0 mmLifting height — on tyres 16200.0 mmRated capacity 4000 kgCapacity (at max. height on stabilisers) 2500 kgCapacity (at max. height on tyres) 1000 kgCapacity (at max. reach on stabilisers) 560 kgCapacity (at max. reach on tyres) 0 kgMax. reach on stabilisers 13700.0 mmMax. reach on tyres 12800.0 mmCrowding force 4900 daN
WeightsWeight (unladen) 10790 kg
TractionStandard tyres 400/80x24Low speed (forward/reverse) 8.5 km/hHigh speed (forward/reverse) 30.0 km/hDriving modes Direct drive / soft drive
Drive SystemMain drive Hydrostatic motorTransmission Hydrostatic with electronic regulation
EngineMake / Model DEUTZ / TCD 3.6 L4Fuel DieselCooling LiquidRated power (ISO 14396) at 2300 RPM 74.4 kWMaximum torque at 1600 RPM 410.0 NmNumber of cylinders 4Displacement 3.62 L
Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min
Cycle TimesLift time - no load 12.8 sLower time - no load 8.4 sTelescope in time at max. reach - no load 20.3 sTelescope in time at max. height - no load 17.7 sTelescope out time at max. reach - no load 29.0 sTelescope out time at max. height - no load 29.0 s
BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command
Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L
Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signals
Right and left side mirrorsTwo way hydraulic supply at the end of the boomMudguardsTurbo-charged engine - Perkins Stage 3ANarrow hook-up for mounting of the equipmentMechanical lock of the equipmentFour 400/80x24 tyresTransmission lock override
EnvironmentalSound pressure level (LpA) 79 dB(A)Level of acoustic power (LWA) 106 dB(A)Whole body vibration (ISO 2631–1) 0.29 ms-2
Load ChartsWith forks and standard 400/80x24 tyres, on stabilisers
Complies with stability test EN1459 Ennex B
Dimensions
(-) 16°(-) 109°(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm
OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDouble right rear viewmirrorDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel cap
Man platform predispositionMultifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready
(A) 7313.0 mm(B) 6052.0 mm(E) 2670.0 mm(F) 2476.0 mm
(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm
(P) 1992.0 mm(Q) 2394.0 mm(R) 5720.0 mm(S) 3782.0 mm(U) 1761.0 mm
(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm
(G) 124°(J) 500.0 mm
(M) 2850.0 mm(O) 930.0 mm
(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm
DI CE - Drève Richelle 167 - B-1410 Waterloo, Belgium
Spec
ifica
tions
and
des
ign
are
subj
ect t
o ch
ange
with
out n
otic
e. P
ictu
res
of B
obca
t pro
duct
s m
ay s
how
oth
er th
an s
tand
ard
equi
pmen
t.
©2013 BOBCAT B4474500-EN (11-13)
T40140 T40180 — SPECIFICATIONS
OPTIONS T40140 T40180Air conditioning x x
Air suspension seat x x
Auxiliary line on boom with ACD and electric connectors x x
Back-Up alarm x x
Basic tow hitch x x
Boom light x x
Boom stop x x
Carriage with hydraulic attachment lock x x
Cold start x x
Cyclonic air prefilter x x
Document holder (PVC) x x
Drawbar coupler tow hitch x x
Fan inverter x x
Fire extinguisher x x
Forward/Reverse control on steering wheel lever x x
Lockable fuel cap x x
Manplatform Installation x x
Michelin tyres - set of 4 x 400/80-24" x x
Multifunctional remote control x x
Custom colour x x
Pintle tow hitch x x
Protective grill for windshield x x
Protective zinc coat x x
Radio ready x x
Rear electric auxiliary x x
Rear flat mirror x x
Roof window wiper x x
Rotating beacon x x
Sun visor x x
Support for vehicle registration plate x x
Wheel wedge x x
Winch Installation x x
ATTACHMENTS T40140 T40180 Digging Bucket w/o teeth x x
Digging Bucket w/ teeth x x
Concrete Bucket, hydraulic x x
Concrete Bucket, mechanic x x
Rigid Pallet Forks Frame x x
Rigid Pallet Forks Frame w/Backrest x x
Floating Pallet Forks, 1,12m wide x x
Floating Pallet Forks, 1,44m wide x x
Jib 4.1t, 0.7m x x
Jib 0.7t , 3.7m x x
Winch 4.1t x x
Winch w/ Jib 600 kg x x
Winch w/ Jib 1000 kg x x
Man Platform, extendable, rotatable, 4m x x
Man Platform , fixed, 1m x x