ESCAPE FROM INDOCHINA · Title: ESCAPE FROM INDOCHINA Subject: ESCAPE FROM INDOCHINA Keywords
MEMS Two-Phase Vapor Escape Heat Exchanger
description
Transcript of MEMS Two-Phase Vapor Escape Heat Exchanger
![Page 1: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/1.jpg)
MEMS Two-Phase Vapor Escape MEMS Two-Phase Vapor Escape Heat Exchanger Heat Exchanger
Milnes David
Tarun Khurana
Christopher Anderson
![Page 2: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/2.jpg)
Concepts
1. Evaporator with hydrophobic, porous membrane
Heat flux
Liquid inlet
Vapor outlet
Silicon
Liquid channel Vapor channelHydrophobic, porous
membrane
Hydrophobic PTFE, AdvantecMFS
Polycarbonate, GE Wet etched pores combined with porous membrane. Etched pores act
as bubble traps [Meng, 06]
![Page 3: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/3.jpg)
Process Flow
1. Diffusion Clean
2. Oxide Growth
3. Al. Sputter
4. Backside Pattern (heaters & sensors)
5. Al Etch
6. Ashing
7. PRX 1000 Clean
8. Backside LTO deposition
9. Backside protect
10. Front-side Oxide Etch (HF)
11. Front-side pattern (channels)
12. Front-side channel etch (STSDRIE)
13. Backside pattern (bond pads)
14. Pad etch
![Page 4: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/4.jpg)
Process Layout
15. Backside pattern (through etch)
16. Through etch (STS DRIE)
17. Final released device
18. Adhesive coat on transfer substrate
19. Contact printing of adhesive
20. Membrane attachment via UV curing
21. Attachment of patterned double sticky tape (vapor channel)
22. Top cover integration
![Page 5: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/5.jpg)
Materials Acquired:
• Membranes:– Polycarbonate – 0.1 um. 0.2 um, 0.4 um and 3 um– Teflon – 0.2 um– Membrane characterization apparatus has been built.– Teflon coating of Polycarbonate membranes using similar setup.
• Adhesives:– 5 different types on order.– Challenge:
• Temperature Stability (chosen adhesives stable to 180 oC).• Adhesion to membrane and silicon.
– 3 of chosen adhesives work well with Polycarbonate and Si– 2 of chosen adhesives work well with Polycarbonate and SiO2.
– No appropriate adhesive for Tefon and Si.
– Characterization apparatus to be designed.
![Page 6: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/6.jpg)
Membrane Test Structure
Fluid in
Acrylic Structure
Membrane
![Page 7: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/7.jpg)
Membrane Test Setup
Pressurized Liquid Chamber
Pressure Sensor
Membrane Test Structure
Pressurized Liquid Chamber
Pressure Sensor
Membrane Test Structure
![Page 8: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/8.jpg)
Temperature Sensor Electronics
![Page 9: MEMS Two-Phase Vapor Escape Heat Exchanger](https://reader035.fdocuments.us/reader035/viewer/2022062408/56813c23550346895da5998a/html5/thumbnails/9.jpg)
Power Supply