MEDIdrawer and RXdrawer _ CAEM METSYS NACDS 2011
4
MEDIDRAWER uses the CAEM Modular Shelving System therefore an infinite range of configurations is available to the designer. The structure is fully modular and walls and aisles can be created very easily. Each MEDIDRAWER clicks on the vertical profile (the “upright”) in either horizontal or inclined position. These pictures show the look of 9 ft wall of 27 MEDIDRAWERS in a combination of horizontal and inclined positions. MEDIDRAWER and the CAEM structure deliver extreme flexibility: the stock can be configured with the same MEDIDRAWERS all inclined 15°, or combined inclined 15° and horizontal or all horizontal. A number of 9 MEDIDRAWERS per unit is recommended to reach a good combination of safe ergonomics, efficient use of floorspace and enough vertical stock space in each drawer. These pictures shows MEDIDRAWER on a T25 System - the nett spaces are: 2 2/3” 3 2/3” 4 2/3” 5 2/3” etc. MEDIDRAWER
-
Upload
caem-magrini-spa -
Category
Technology
-
view
565 -
download
0
description
MEDIdrawer and RXdrawer storage solution for Drugs presented by CAEM METSYS at NACDS convention in Boston, August 2011.CWCS is also explained: CAEM WIll Call System for management of Will Call RX
Transcript of MEDIdrawer and RXdrawer _ CAEM METSYS NACDS 2011
MEDIDRAWER uses the CAEM Modular
Shelving System therefore an infinite
range of configurations is available to the
designer. The structure is fully modular and
walls and aisles can be created very easily.
Each MEDIDRAWER clicks on the vertical
profile (the “upright”) in either horizontal
or inclined position. These pictures show
the look of 9 ft wall of 27 MEDIDRAWERS
in a combination of horizontal and inclined
positions.
MEDIDRAWER and the CAEM structure
deliver extreme flexibility: the stock can be
configured with the same MEDIDRAWERS
all inclined 15°, or combined inclined 15° and
horizontal or all horizontal.
A number of 9 MEDIDRAWERS per unit is
recommended to reach a good combination
of safe ergonomics, efficient use of
floorspace and enough vertical stock space
in each drawer.
These pictures shows MEDIDRAWER on a
T25 System - the nett spaces are:
22/3” 32/3” 42/3” 52/3” etc.
ME
DID
RA
WE
R
Pharmacist and Hospital managers will have their
stocking needs satisfied with MEDIDRAWERS also in
the labeling aspects. MEDIDRAWER units are normally
labeled unit after unit, top left to bottom right.
Back-to-front dividers can be placed very
easily and anywhere at 2 inch space.
Side-to-side dividers have a window to
ease the Pharmacist looking at drugs and
can be placed between vertical dividers
anywhere at ½ inch spacing.
Compartments can be created and
adjusted easily at any time in infinite
combinations.
A number of plastic accessories is available in order to use printed
tags and avoid stickers.
A full height and full length pocket can be used in order to locate the
letter anywhere at any time.
If a lower tag is enough, a lesser high pocket is available.
The same pockets can be supplied at 2” length to be used anywhere.
13/17/21”
T25: 23/8”/ 31/8”/ 45/16”
12/16/20”
100% opening➠ ➠ ➠
Performance Weight Capacity Reliability
12/16/20” 60 lbs 50.000 openingsat 24 lbs *
* Norm UNI 8581/84Norm FA 2/95
MEDI DRAWER
The RXDRAWER cabinet can be configured in a array of options:
from 2 to 7 stacks of drawers, each stack having from 6 to 18
drawers in even numbers. The maximum use of floor space is
achieved with the taller cabinets, where the top drawers are usable
with commonly seen accessories.
RXDRAWERS are fitted with high quality glides having a tested
long lasting operating life. The drawers are slightly inclined
upwards to ease the coming back to the closed position.
RXDRAWER is the multi drawer cabinet for the stock of medicines in
Pharmacies and Hospitals. It has a unique design so that the structure
and the drawers are delivered totally flat pack for a truly eco friendly
solution.
The cabinet is fully modular and is easy to install and level.
RXDRAWER increases the stocking capacity within dispensary areas
in pharmacies and stock areas of hospitals and delivers an attractive
and clean design to such environments.
RXDRAWER is available as RXDRAWER50 which is 20” deep and as
RXDRAWER70 which is 27” deep.
Each stack can be of 6, 8, 10, 12, 14, 16 or 18 drawers.
The cabinet can be built with 2, 3, 4, 5, 6 or 7 stacks of drawers.
RX
DR
AW
ER
www.caemmetsys.com
CAEM METSYS LLC13981 Valley View LaneChino Hills, CA 91709Tel. [email protected]
CAEM Will Call System is the solution
for RX Will Call delivering optimization of
space and time savings.
CAEM suggests to use a tags in each bin
and a Warehosue Management System to
stock and then pick customers’ RX. This
will work with either MEDIDRAWER and
RXdrawers.
See CWCS at www.vimeo.com/caem/cwcs
Why to use MEDIDRAWER for your CWCS:
• adjustability;
• visibility of drugs;
• integration with other shelving;z
• compatibility with other shelving
• total flexibility of dividers
• stock the bottles and avoid prefilling bags
Why to use RXDRAWER for your CWCS:
• cleaner design
• closed drawers
• lighter drawers
• stock the bottles and avoid prefilling bags
51/2”
23/16”
13/4”
13/4”
153/
8”
+153/
8”
+153/
8”
415/16”
+415/16”
+415/16”
+415/16”
PerformanceWeight
CapacityReliability
500 77 lbs 40.000 openings at 66 lbs
700 66 lbs 40.000 openings at 55 lbs
NET
303/8” or 221/2”
271/2”or 20”
100% opening
43/4”➠ ➠ ➠
RX
DR
AW
ER
CWCS
