mect iat 3-1
3
Register Number_________________ NARASU’S SARATHY INSTITUTE OF TECHNOLOGY, SALEM DEPARTMENT OF CIVIL ENGINEERING INTERNAL TEST-III SEPTEMBER 2015 Year/Sem: IV / VII-A Max.Marks:50 Subject Code / Name: ME 2401/MECHATRONICS Time: 1:30 Hrs Answer all the questions Part A (9X2 = 18) 1. Name the various stages in designing a mechatronics system 2. List the seven modules of mechatronics approach. 3. Distinguish between traditional and mechatronics system. 4. What are the requirements satisfied before starting a timer? 5. What is a timed switch? 6. What is a duty cycle 7. What is a wind screen viper? 8. What are the configurations of operating a stepper motor? 9. What are the various movements of robots? Register Number_________________ NARASU’S SARATHY INSTITUTE OF TECHNOLOGY, SALEM DEPARTMENT OF CIVIL ENGINEERING INTERNAL TEST-III SEPTEMBER 2015 Year/Sem: IV / VII-A Max.Marks:50 Subject Code / Name: ME 2401/MECHATRONICS Time: 1:30 Hrs Answer all the questions Part A (9X2 = 18) 1. Name the various stages in designing a mechatronics system 2. List the seven modules of mechatronics approach.
-
Upload
hariharan-elangandhi -
Category
Documents
-
view
213 -
download
0
description
NOTHING
Transcript of mect iat 3-1
Register Number_________________
NARASU’S SARATHY INSTITUTE OF TECHNOLOGY, SALEMDEPARTMENT OF CIVIL ENGINEERINGINTERNAL TEST-III SEPTEMBER 2015
Year/Sem: IV / VII-A Max.Marks:50Subject Code / Name: ME 2401/MECHATRONICS Time: 1:30 Hrs
Answer all the questions Part A (9X2 = 18)
1. Name the various stages in designing a mechatronics system
2. List the seven modules of mechatronics approach.
3. Distinguish between traditional and mechatronics system.
4. What are the requirements satisfied before starting a timer?
5. What is a timed switch?
6. What is a duty cycle
7. What is a wind screen viper?
8. What are the configurations of operating a stepper motor?
9. What are the various movements of robots?
Register Number_________________
NARASU’S SARATHY INSTITUTE OF TECHNOLOGY, SALEMDEPARTMENT OF CIVIL ENGINEERINGINTERNAL TEST-III SEPTEMBER 2015
Year/Sem: IV / VII-A Max.Marks:50Subject Code / Name: ME 2401/MECHATRONICS Time: 1:30 Hrs
Answer all the questions Part A (9X2 = 18)
1. Name the various stages in designing a mechatronics system
2. List the seven modules of mechatronics approach.
3. Distinguish between traditional and mechatronics system.
4. What are the requirements satisfied before starting a timer?
5. What is a timed switch?
6. What is a duty cycle
7. What is a wind screen viper?
8. What are the configurations of operating a stepper motor?
9. What are the various movements of robots?
Answer all the questions Part B (2X16 = 32)
10. a) Compare and contrast mechatronics approach with traditional approach. Give suitable
examples. (16)
(Or) b) Explain the mechatronics design of an automatic car park system. (16)
11. a) Design a mechatronics system for an automatic camera and explain the various
mechatronics elements. (16)
(Or)b) Discuss the mechatronics elements in a wireless surveillance balloon. (16)
Answer all the questions Part B (2X16 = 32)
10. a) Compare and contrast mechatronics approach with traditional approach. Give suitable
examples. (16)
(Or)b) Explain the mechatronics design of an automatic car park system. (16)
11. a) Design a mechatronics system for an automatic camera and explain the various
mechatronics elements. (16)
(Or)b) Discuss the mechatronics elements in a wireless surveillance balloon. (16)
