Measure Guide

A. Pick your hinges first: This will determine what size overlay is needed. B. Measuring opening size: (Do not order by these opening size dimensions.) Measure all door openings, round down to the nearest 1/16". Always write width first. C. Figuring order sizes: For 1/2" overlay add 1" to the width and 1" to the height of each opening size. If your application requires a different overlay, adjust the measurements accordingly. For inset applications, subtract no less than 1/4" on both width and height of cabinet opening measurements. Doors and drawer fronts will be custom-made to the sizes you specify, so measure carefully. Standard drawer wood grain runs horizontally. • Order two doors to cover any opening more than 22" wide. Doors over 26" in width and/or 48" to 50" in height may have double panels. • Minimum Size Information: If you use a minimum size you must add 4" to the other dimension. • We guarantee no warping or cracking on doors sized up to 23" wide and/or 46" high; drawer fronts up to 30" wide and/or 12" high. Doors over 50" require an additional $75 charge per order. Please check measurements carefully – accuracy is essential! 25% restocking charge on custom orders. Minimum charge per drawer is 216 square inches. Door Drawer Front Tolerances: Sizes received may be 1/16" larger or smaller than sizes ordered. Door Height Door Width Drawer Height Drawer Width Height (Grain) Width How to measure your doors and drawer fronts: Height (Grain runs horizontally) Width

Upload
nmnandita5938
Category

Documents
view
212
download
0

Embed Size (px):

description

Measure Guide

Transcript of Measure Guide

A.Pickyourhingesfirst:This will determine what size overlay is needed.

B.Measuringopeningsize:(Do not order by these opening size dimensions.)

Measure all door openings, round down to the nearest 1/16".

Alwayswritewidthfirst.C.Figuringordersizes:

For 1/2" overlay add 1" to the width and 1" to the height of each opening size. If your application requires a different overlay, adjust the measurements accordingly. For inset applications, subtract no less than 1/4" on both width and height of cabinet opening measurements. Doors and drawer fronts will be custom-made to the sizes you specify, so measure carefully. Standard drawer wood grain runs horizontally.

• Order two doors to cover any opening more than 22" wide. Doorsover26"inwidthand/or48"to50"inheightmayhave

doublepanels.• MinimumSizeInformation:If you use a minimum size you must add

4" to the other dimension.• We guarantee no warping or cracking on doors sized up to 23" wide

and/or 46" high; drawer fronts up to 30" wide and/or 12" high. Doorsover50"requireanadditional$75chargeperorder. Pleasecheckmeasurementscarefully–accuracyisessential!

25%restockingchargeoncustomorders.Minimumchargeperdraweris216squareinches.

Door DrawerFront

Tolerances: Sizesreceivedmaybe1/16"largerorsmallerthan

sizesordered.

DoorHeightDoorWidth DrawerHeightDrawerWidth

Heig

ht (G

rain

)

Width

How to measure your doors and drawer fronts:

Heig