ME New · 2020-04-17 · Fits and Tolerances, Hole base and Shaft base system, Fundamental...

TM

Since 2004

MECHANICAL ENGINEERING(One Year Program)

ONLINE TEST SERIESGATE 2021

Compete with the best...

www.onlinetestseries.gateacademy.co.inStep to success... GATE ACADEMY

Our procient faculties have done extensive research to prepare and shape these test series.

An opportunity for students to come across their strengths and weaknesses and work on them properly to turn the things around.

Care has been taken to ensure that the quality of questions has the same level of difculty as is there in the GATE.

Highlights (One Year Program) :

GATE 2021 ONLINE TEST SERIESCompete with the best...

• There are 25 topic wise tests, 22 subject wise tests, 10 combined

subjects tests & 10 full length mock tests.

• Exam software will let you feel environment same as GATE.

• Best question bank containing all difculty levels from entire syllabus

for complete preparation.

• This test series gives the exibility to students to appear in the tests

any time & from anywhere based on their convenience and check

their level of preparation.

• The individual results will be available immediately after the test.

• Students can check their relative performance based on different

parameters, such as question wise i.e. for a particular question how

many students were able to correctly solve that question and how

much time they have taken.

• All India Rank and comparison with All India GATE 2021 aspirant

will be available in most comprehensive manner.

• Electronic Gadgets such as virtual keyboard and virtual calculator

available.

GATE ACADEMY GATE ACADEMY GATE ACADEMY TEST SERIES STRUCTURE (ME)TEST SERIES STRUCTURE (ME)TEST SERIES STRUCTURE (ME)

Stage - IIICombined Subject

Tests (10)

Final StageFull Length Mock

Tests (10)

Mock - 5

Mock - 6

Mock - 3

Mock - 4

Mock - 9

Mock - 10

Mock - 7

Mock - 8

Mock - 1

Mock - 2

Core Subjects

Thermodynamics+

HMT

Production+

Industrial

Theory of Machines+

Applied Thermo

Stage - ITopic Wise Tests (25)

Stage - IISubject Wise Tests (22)

Moderate

Advance

Both tests individuallycover entire syllabus ofthe subject but differ in

difculty level.

Test - 2Test - 1

The complete GATE syllabus of each subject is divided in two parts to form Test - 1 and Test - 2, containing easyto moderate level questions covering all important formulae and concepts

Common Subjects

SOM + FM Maths + Aptitude

Difculty level of test 2 will be higher

Intermediate Level Test

Advance Level Test

Get Registered

Advance Level Test


Advance Level Test


Advance Level Test


Advance Level Test


GATE 2021ONLINE TEST SERIES

Compete with the best...

For Special Discount

ONLY TOPIC WISE TESTOther than Gate Academy Students

ONLY SUBJECT WISE TEST (Full Syllabus)Other than Gate Academy Students

ONLY FULL LENGTH MOCK TESTOther than Gate Academy Students

SUBJECT WISE + TOPIC WISE TESTOther than Gate Academy Students

SUBJECT WISE + FULL LENGTH MOCK TESTOther than Gate Academy Students

400 Rs + GST)

400 Rs + GST

500 Rs + GST

600 Rs + GST

600 Rs + GST

SPECIAL DISCOUNT FOR GATE RANK HOLDERS

GATE AIR upto 1000

GATE AIR 1000 to 2000




300 Rs + GST

400 Rs + GST

500 Rs + GST

600 Rs + GST

100 Rs + GST

COMPLETE TEST PACKAGE

ALL TEST PACKAGE DETAILS (One Year Program)

Gate Academy Students

Other than Gate Academy Students

Ex. Gate Academy Students

400 Rs + GST

900 Rs + GST �ll 30 June1000 Rs + GST a�er 30 June

600 Rs + GST

COMPLETE TEST PACKAGE

Send your GATE Score Card (2020) on [email protected] shall get coupon code regarding same within 24 Hrs.

Test Name Description

Topic Wise Tests Total 20 tests

Subject Wise Tests (Basic Level) Total 10 tests

Multiple Subjects Tests Total 10 tests

Full Length Mock GATE Total 10 tests

Subject Wise Test (Advance Level) Total 10 tests

Star�ng from 15 April 2020

Star�ng from 1 May 2020

Star�ng from 15 June 2020

Star�ng from 30May 2020


BRANCH : MECHANICAL ENGINEERING (One Year Program)

Online Test Series Schedule for GATE 2021

Online Test Series Schedule for GATE 2021BRANCH : MECHANICAL ENGINEERING

Topic-wise Tests (One Year Program)(Each test carries 25 marks and 45 minutes duration.

Test consists of 5 one mark questions and 10 two marks questions)

Test 1

Test 2

Topic

Strength of

Materials

Stress And Strain, Stress-stress Rela�onship And Elas�c Constants,

Shear Force And Bending Moment Diagrams, Thermal Stresses,

Mohr's Circle For Plane Stress And Plane Strain, Thin Cylinders

Subject Date (Available From)

15 April 2020

Total

67 Tests

Deflec�on of beams; torsion of circular sha�s; Euler's theory of

columns; strain energy methods; strain gauges and rose�es;

tes�ng of materials with universal tes�ng machine; tes�ng of

hardness and impact strength.

Topic

FluidMechanics

Fluid properties; fluid statics, manometry, buoyancy; forces on submerged bodies; stability of floating bodies; fluid acceleration; differential equations of continuity; Control-volume analysis of mass, momentum and energy,

Subject Date (Available from)

Fluid Dynamics , Laminar Flow & Turbulent Flow , Flow through pipes , Boundary layer, Dimensional Analysis

Test 1

Test 2

15 April 2020

Topic

IndustrialEngineering

Production Planning and Control: Break- even analysis, Forecasting models, Scheduling / Sequencing, Material Requirement Planning (MRP), Line balancing.Inventory control : Deterministic and Probabilistic models, Safety stock inventory control systems.


Test 1

Test 2

15 April 2020Operation Research: Linear programming problem (Graphical and Simplex method), Transportation problem, Assignment problem,Queuing theory.CPM : Project network, Project completion time, Types of float, Crashing.PERT : Mean project completion time, Standard deviation and Variance

Topic

EngineeringMechanics

Free-body diagrams and equilibrium; trusses and frames; virtual work; friction, Moment of inertia


Test 1

Test 2

15 April 2020kinematics and dynamics of particles and of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations, collisions.

Topic

Theory ofMachine

Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; gears trains; flywheels and governors.


Test 1

Test 2

15 April 2020Cams; Free and forced vibration of single degree of freedom systems; effect of damping, vibration isolation; resonance; critical speeds of shafts. balancing of reciprocating and rotating masses; gyroscope.

Topic

EngineeringMathematics

Linear Algebra, Differen�al Equa�on, Limits and Series expansion, Probability, Numerical methods, Vector Calculus


Test 1

Test 215 April 2020Differen�al Calculus, Integral Calculus, Mean Value

Theorem, Complex Variable, Maxima and Minima

Topic

ManufacturingEngineering

Material science: Structure of material ( SCC, BCC, FCC, HCP), Unit cell parameter (APF, Coordination number, Number of atoms per unit cell), Imperfection or Defects (Point, line, surface), Iron-carbon equilibrium diagram, TTT diagram, Heat treatment processes (Hardening, Annealing, Normalizing, Tempering).Casting: Pattern size, Allowances (Shrinkage, Machining, Draft, Shake/ Rapping, Distortion/ Bending allownces ), Permeability number, Core making, Gating ratio, Pouring or Filling time, Aspiration effect, Solidification time, Riser design (Freezing ratio, Shape factor), Miscellaneous casting processes (Slush casting, Investment casting, Centrifugal casting etc), Casting defects.Welding: Gas welding, Arc welding (TIG, MIG, SAW, Arc - Voltage characteristic and Linear- Power source characteristic), Friction welding, Thermit welding, Resistance welding,Soldering,Brazing and Braze welding, Welding defects.


Test 1

Test 2

15 April 2020Metal forming processes: Rolling ,Drawing, Extrusion, Forging.Sheet metal operation: Punching, Blanking, Deep drawing, Bending.Metal cutting and machining: Tool geometry and Tool designation, Merchant circle diagram, Taylor's tool life equation, Economics of machining, Shaping, Planning, Turning, Boring, Drilling, Milling, Grinding.Non-conventional machining: AJM, USM, ECM, EDM, EBM, LBM.Principle of Powder metallurgy: Sintering, Infiltration, Impregnation.

Metrology and inspection: Linear and Angular measurements, Limits, Fits and Tolerances, Hole base and Shaft base system, Fundamental deviation, Standard tolerance unit, Limit gauge (Plug and Ring gauge, GO size and NO-GO size).Advance machining method: Basic concepts of NC and CNC , Basic length unit (BLU) , Part programming of CNC (G-code and M-code).Gear manufacturing processes: Gear forming, Gear generation (Gear shapping, Gear hobbing )

Test 3

Topic

GeneralAptitude

Quantitative Aptitude


Test 1

Test 215 April 2020

Verbal Aptitude

Subjects Date (Available from)

Topic-wise Tests (One Year Program)(Each test carries 30 marks and 60 minutes dura�on.

Test consists of 10 one mark ques�ons and 10 two marks ques�ons)

No. of Tests

02

02

02

02

02

02

02

03

02

02

02

02













Test 1

Test 2

Topic

Heat

Transfer

Modes Of Heat Transfer; One Dimensional Heat Conduc�on,

Resistance Concept, Electrical Analogy, Unsteady Heat Conduc�on,

Lumped Parameter System, Heisler's Charts, Heat Transfer Through

Extended Surfaces.


18 April 2020Thermal Boundary Layer, Dimensionless Parameters In Free And

Forced Convec�ve Heat Transfer, Heat Transfer Correla�ons For

Flow Over Flat Plates And Through Pipes, Effect Of Turbulence,

Heat Exchanger Performance, LMTD And NTU Methods, Radia�ve

Heat Transfer, Stefan-boltzmann Law Wien's Displacement Law,

Black And Grey Surfaces, View Factors, Radia�on Network

Analysis.

Design for static and dynamic loading; failure theories; fatigue

strength and the S-N diagram; principles of the design of machine

elements such as bolted, riveted and welded joints

Spur gears, rolling and sliding contact bearings, brakes, clutches and springs.

Test 1

Test 2

Topic

Machine

Design


18 April 2020

Topic

BasicThermo-dynamics

Thermodynamic systems and processes; Zeroth and first law of thermodynamics, calculation of work and heat in various processes.


Second law of thermodynamics, Entropy, Thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations, Properties of Pure Substances, Behavior of Ideal and Real Gases.

Test 1

Test 218 April 2020

Topic

AppliedThermo-dynamics

Power Engineering: Air and gas compressors, vapour and gas power cycles, concepts of regeneration and reheat, I.C. Engines; Air-standard Otto, Diesel and dual cycles, Fuel and Combustion.


Refrigeration and air conditioning : Vapour and gas refrigeration and heat pump cycles, properties of moist air, psychrometric chart, basic psychrometric processes.

Test 1

Test 2

18 April 2020

Strength of Materials

Fluid Mechanics & Hydraulic machines

Industrial Engineering

Engineering Mechanics

Theory of Machine

Engineering Mathematics

General Aptitude

Manufacturing Engineering

Heat-Transfer

Machine Design

Basic Thermodynamics

Applied Thermodynamics


Basic Subject-wise Tests (One Year Program)(Each test carries 50 marks and 90 minutes dura�on.


No. of Tests

01

01

01

01

01

01

01

01

01

01

01












Advance Subject-wise Tests (One Year Program)(Each test carries 50 marks and 90 minutes dura�on.


Subjects Date (Available from)No. of Tests

01

01

01

01

01

01

01

01

01

01

01












Moderate Level 1Advance Level 1





Combined Subject Tests (One Year Program)(Each test carries 50 marks and 90 minutes dura�on.



SOM + FM

MAThs + Ap�tude

Thermodynamics + HMT

Produc�on + Industrial

Theory of Machines + Applied Thermo

No. of Tests






General Aptitude + General English




Machine Design


Heat-Transfer

Thermodynamics & Its Application

Production Engineering


Theory of Machine

General Aptitude + General English




Machine Design


Heat-Transfer

Thermodynamics & Its Application

Production Engineering


Theory of Machine

HEAD OFFICE : A / 114-115, SMRITI NAGAR, BHILAI - 490 020 (C.G.)Contact : 97131-13156, 62662-02387, 0788-4034176

E-mail : [email protected]

SINCE 2004

GATE ACADEMYGATE ACADEMY

Step - I Step - II

Visit

h�p://onlinetestseries.gateacademy.co.in

Click on New Registra�on

Fill the Form, You will be Redirected to the Test Portal

Click on buy Package Make Payment using Coupon code

(For gate academy student) or by online payment.

Send completely filled

registra�on form to our office

(for gate academy student)

Finally... How to get registered for Test Series ?

Note : Students have to Upload their GATE Admit Card for Accessing Full Mock Test.Tests will be accessible �ll one week a�er GATE 2021 Examina�on


Full Length Mock GATE (Tenta�ve Schedule for One Year Program)(Each test carries 100 marks and 3 hours dura�on as per GATE Pa�ern)

Full Length Mock - 1















Star�ng from 15 July 2020





*Information about launching of 2 Years Test Series Program will be available soon

ME New · 2020-04-17 · Fits and Tolerances, Hole base and Shaft base system, Fundamental...

Documents

Transcript of ME New · 2020-04-17 · Fits and Tolerances, Hole base and Shaft base system, Fundamental...