MCT-2612 Series Media Convertercable into various ˜ber media including Multi-mode, Single-mode,...

3
10/100BASE-T to 100BASE-X Compact Managed Media Converter Features 9K Bytes Jumbo Frame Size Support Jumbo Frame size 9K bytes to ease the network traffic loading and facilitate IPTV services. Local Management for Port Status and Configuration Both Local Module Control (Auto, Speed and Duplex) and Local Module Monitor (Link, Speed and Duplex) are avail- able. Fully Compatible with MCT-RACK-18 Series Budget limited solution for MCT-RACK-18 series to mix installation with CTS’s non-management media converter. Link Alarm When UTP or fiber port is down during operation, the other port will be automatically turned off to alert the user. Connection Technology Systems (CTS) MCT-2612 series media converter are the Fast Ethernet 10/100Base-T to 100Base-X media converter. MCT-2612 series media converter allows user to connect Ethernet twisted-pair RJ-45 cable into various fiber media including Multi-mode, Single- mode, Bi-directional WDM, or a SFP slot for pluggable fiber transceiver, extending transmission distance for the deploy- ment to the household, apartment or campus. MCT-2612 series media converter is fully compliant with IEEE 802.3, 802.3u standards. Besides, it is equipped with some switching features including flow control and store and forward mechanism. The installation and operation are quite simple and straight- forward. The operation status can be monitored through a set of diagnostic LED indicators on the front panel. It is especially designed for network operators, metro Ethernet providers, enterprises, SMB, who have the need of imple- menting fiber optical Ethernet networks over long distance, for FTTX solutions, and are looking for an effortless and reliable 100Mbps media converter. Description MCT-2612 Innovation to Your Needs www.ctsystem.com DS-C040_MCT-2612_A01 MCT-2612 Series Media Converter Managed media converter which required monitoring point-to-point connection for the deployment of FTTX applications Target Application

Transcript of MCT-2612 Series Media Convertercable into various ˜ber media including Multi-mode, Single-mode,...

Page 1: MCT-2612 Series Media Convertercable into various ˜ber media including Multi-mode, Single-mode, Bi-directional WDM, or a SFP slot for pluggable ˜ber transceiver, extending transmission

10/100BASE-T to 100BASE-X Compact Managed Media Converter

Features

▪9K Bytes Jumbo Frame Size Support Jumbo Frame size 9K bytes to ease the network traffic loading and facilitate IPTV services.

▪Local Management for Port Status and Configuration Both Local Module Control (Auto, Speed and Duplex) and Local Module Monitor (Link, Speed and Duplex) are avail-able.

▪Fully Compatible with MCT-RACK-18 Series Budget limited solution for MCT-RACK-18 series to mix installation with CTS’s non-management media converter.

▪Link Alarm When UTP or fiber port is down during operation, the other port will be automatically turned off to alert the user.

Connection Technology Systems (CTS) MCT-2612 series media converter are the Fast Ethernet 10/100Base-T to 100Base-X media converter. MCT-2612 series media converter allows user to connect Ethernet twisted-pair RJ-45 cable into various �ber media including Multi-mode, Single-mode, Bi-directional WDM, or a SFP slot for pluggable �ber transceiver, extending transmission distance for the deploy-ment to the household, apartment or campus.

MCT-2612 series media converter is fully compliant with IEEE 802.3, 802.3u standards. Besides, it is equipped with some switching features including �ow control and store and forward mechanism.

The installation and operation are quite simple and straight-forward. The operation status can be monitored through a set of diagnostic LED indicators on the front panel. It is especially designed for network operators, metro Ethernet providers, enterprises, SMB, who have the need of imple-menting �ber optical Ethernet networks over long distance, for FTTX solutions, and are looking for an e�ortless and reliable 100Mbps media converter.

Description

MCT-2612Innovation to Your Needs

www.ctsystem.comDS-C040_MCT-2612_A01

MCT-2612 Series Media Converter

▪Managed media converter which required monitoring point-to-point connection for the deployment of FTTX applications

Target Application

Page 2: MCT-2612 Series Media Convertercable into various ˜ber media including Multi-mode, Single-mode, Bi-directional WDM, or a SFP slot for pluggable ˜ber transceiver, extending transmission

MCT-2612Innovation to Your Needs

www.ctsystem.comDS-C040_MCT-2612_A01

Speci�cationInterface- F/O Port (Type): 1 x 100Mbps (BTFC/W2X/SFP)- TP Port (Type): 1 x 10/100Mbps (RJ-45)

StandardIEEE802.3 10Base-TIEEE802.3u 100Base-TX/FX

LEDPower/Status, TX Link/Act, Speed, FDX, F/OLink/Act

H/W Speci�cationMAC Address Table: 2KMemory Bu�er: 128K BytesJumbo Frame: 9K BytesAuto-Negotiation in TP PortsFull/Half Duplex Mode Operation

Forward/Filter Rate10M: 14,880/14,880pps100M: 148,800/148,800pps

Ethernet Feature- Standalone Con�gure by DIP- Store and Forward Switching Mechanism- Auto-Cross Over for MDI/MDIX in TP Ports- Bandwidth Control- Storm Control- VLAN Transparency- BPDU Transparency

In-Rack Management- Module Reset/Power-Down- IEEE 802.1Q tag VLAN, Q-in-Q- Module Firmware Upgrade- Module Con�guration: • Half/Full Duplex • Port Speed • Port Rate-Limit • Link Alarm- Module Monitor: • Port Status • Port Traffic Counter • SFP/DMI Information

Power RequirementAC to DC Power Adaptor- Input: 100~240VAC, 50/60Hz- Output: 3.3VDC- Power Consumption: 2.1W(Max.)

Environmental ConditionOperation: 0°C ~ 50°CStorage Temperature: -20°C ~ 60°CHumidity: 5% ~ 90% Non-Condensing

Dimension & WeightSize: 51 x 74 x 20 mmWeight: 0.1Kg

EMC/SafetyFCC Class A, CE

Application Diagram

Page 3: MCT-2612 Series Media Convertercable into various ˜ber media including Multi-mode, Single-mode, Bi-directional WDM, or a SFP slot for pluggable ˜ber transceiver, extending transmission

MCT-2612Innovation to Your Needs

www.ctsystem.com

Order Information

DS-C040_MCT-2612_A01

MCT-2612

Speed(Mbps)

Type Connector Distance PortSpeed(Mbps)

Port

MCT-2612BTFC 100 MM SC 2KM 1 10/100 1

MCT-2612BTFT 100 MM ST 2KM 1 10/100 1

MCT-2612BTFC(SM-30/50/80/100)

100 SM SC 30/50/80/100KM 1 10/100 1

MCT-2612W2A(SM-20/40) 100 WDM SC 20/40KM 1 10/100 1

MCT-2612W2B(SM-20/40) 100 WDM SC 20/40KM 1 10/100 1

MCT-2612SFP 100 SFP - - 1 10/100 1

MODELTP PORTFIBER PORT

Speed(Mbps)

Type Connector Distance Wavelength Temperature

SFP-21FC 100 MM LC 2KM 1310nm 0°C to 70°CSFP-21FC(SM-20/30/50/80) 100 SM LC 20/30/50/80KM 1310nm/1310nm/1310nm/1550nm 0°C to 70°C

TX:1310nm/1310nm/1490nmRX:1550nm/1550nm/1570nmTX:1550nm/1550nm/1570nmRX:1310nm/1310nm/1490nm

TX:1310nmRX:1550nmTX:1550nmRX:1310nm

SFP-21FC-C11 100 CWDM LC 80KM 1470nm 0°C to 70°CSFP-21FC-C12 100 CWDM LC 80KM 1490nm 0°C to 70°CSFP-21FC-C13 100 CWDM LC 80KM 1510nm 0°C to 70°CSFP-21FC-C14 100 CWDM LC 80KM 1530nm 0°C to 70°CSFP-21FC-C15 100 CWDM LC 80KM 1550nm 0°C to 70°CSFP-21FC-C16 100 CWDM LC 80KM 1570nm 0°C to 70°CSFP-21FC-C17 100 CWDM LC 80KM 1590nm 0°C to 70°CSFP-21FC-C18 100 CWDM LC 80KM 1610nm 0°C to 70°C

0°C to 70°CSFP-21W2B(SM-20)SC 100 WDM SC 20KM

0°C to 70°C

SFP-21W2A(SM-20)SC 100 WDM SC 20KM 0°C to 70°C

SFP-21W2B(SM-20/40/80) 100 WDM LC 20/40/80KM

100 WDM LC 20/40/80KM 0°C to 70°C

SFP-21

MODEL

FIBER PORT

SFP-21W2A(SM-20/40/80)