7/28/2019 Mcr Master Control Rack-654-En

1/2

KREMLIN REXSON & SAMES

KREMLIN REXSON & SAMES - World leader in sprayingpage 1/2

KREMLIN REXSON India PrivateLtd

Powder Products | Automatic and Robotic Solutions SAMES Peripherals MCR (Master Control Rack)

MCR (Master Control Rack)

Automatic application control of a painting installation.

DescriptionThe new MCR control rack monitors all the parameters of an automatic powder

paint installation with great precision. MCR is a 19-inch rack-mounted product,designed to be integrated into the FCR modular cabinet.It allows the management of a range of application processes, from the simplestto the most complex, and can be combined with the different control modulessuch as :The VCR converter control robot module used to manage sweeping andreciprocator positioning.The TCR or CRN457 modules used to control trigger movement, flow-rate,high voltage,...The interface with the customer's installation used to detect the parts,authorise conveyor operation, etc.

Custumer benefits

Easy to operate :MCR permits to the operator to drive very simply the installation. The control bytouch screen allows a simple and fast input on actions.

Time savings :MCR ensures the automatic calibration of high and low points of the robot, withequipments you installed. During production, you can change the parameters ofeach table on-line and with out stopping the conveyor. A correcting coefficientcan adjust each the table parameters without changing them (for instance : thepowder flow of all sprayers is increased of 10 % simultaneously).

Flexibility of use :MCR allows to manage simultaneously tow types of different sprayers(INOBELL and Auto-Mach-Jet) in one spraying table. The sprayers can beparametered independently, and when the part is detected : the film built ishomogenous, thus major paints savings are achieved.

Preventive maintenance :A production assessment permits counting the functioning hours of sprayers androbots. Setting of alarm levels is possible. It permits to inform user when thepreventive maintenance time is reached, in order to check :

the electrode of Auto Mach-Jetthe powder feed systemthe vertical sweeping move of the robot

http://www.kremlinrexson-sames.in/http://www.kremlinrexson-sames.in/http://localhost/var/www/apps/conversion/tmp/scratch_5/79-powder_products_automatic_and_robotic_solutions_sames.html#products_listhttp://localhost/var/www/apps/conversion/tmp/scratch_5/173-peripherals.html#products_listhttp://localhost/var/www/apps/conversion/tmp/scratch_5/173-peripherals.html#products_listhttp://localhost/var/www/apps/conversion/tmp/scratch_5/79-powder_products_automatic_and_robotic_solutions_sames.html#products_listhttp://www.kremlinrexson-sames.in/http://www.kremlinrexson-sames.in/

7/28/2019 Mcr Master Control Rack-654-En

2/2

KREMLIN REXSON & SAMES

KREMLIN REXSON & SAMES - World leader in sprayingpage 2/2

KREMLIN REXSON India PrivateLtd

Supply MCR Variateur VCR

Inlet voltage 230 V mono 230 V tri

Inlet frequency 47 - 63 Hz

Inlet current 1 A 10 A

Temperature (ambient) < 40C < 40C

Humidity (ambient) < 85 % < 85 %

Installation zone non ATEX non ATEX

Trigger outputs

Nominal voltage 250/250 V AC commutable

Nominal current 7A / 15A

Nominal charge 1750 VA / 350 VA

Stop power in DC1 30 / 110 / 220V : 7 / 0.25 / 0.12 A

Minimum switching load 300 mW (5V/5mA)

Weight (kg) 10.8 kg 8.8 kg

Higher 4 U 2 U

Width (cm) 19 pouces 19 pouces

Protection level IP 20 IP 20

Screen 5.6 pouces, couleur

http://www.kremlinrexson-sames.in/http://www.kremlinrexson-sames.in/http://www.kremlinrexson-sames.in/http://www.kremlinrexson-sames.in/