McAfee server console maintanence MODIFIED doc

McAfee

McAfee

AT

NATIONAL INSURANCE COMPANY LIMITED

BY

HCL COMNET LIMITED

- 1 -

McAfee

Architecture :

The ePO Server is located in Kolkata.There are 960 branch offices ( Operational Offices ) with an average of 6 systems per branch and these branches are connected to 20 Regional Offices.Since the branches have 128KBPS links, the repository deployment should be considered on RO’s regional wiseePO server in Kolkata .The ePO server takes update from internet. It replicate the update to the all RO’s . The client machines of different RO’s take update from RO’s. The machines can also take update from HO. RO and HO have 2 MBPS links. All the RO’s and HO are connected with each other thorough MPLS .The first preference for taking updates of an operating office should be the respected RO of that particular operating office. If any client machine of that operating office can’t take update from its RO then it will go to the another repository of it’s region.

- 2 -

McAfee

Contents:-

1. Console Login ( page 3 – 4 ) 2. McAfee Server Task ( page 5 – 16 )

3. McAfee Agent Task ( page 17 – 39 )4. Assign Policies For All Operating Office’s Machines and Servers ( page 40 – 90 )5. Assign Policy For Laptops ( page 91 – 96 )6. Daily Maintenance ePO Console ( page 97 – 114 )7. Installation Process of New Packages ( page 115 – 123 )8. Manual Server Update ( page 124 – 125 )9. Replication from Server ( page 126 – 130 )

10. Checking Repository Status ( page 131 – 132 ) 11. Checking Reports Logs ( page 133 – 137 ) 12. Database Maintenance ( page 138 – 150 )

- 3 -

McAfee

Console login:

Fig -1

Click on the ePolicy Orchestrator 3.6.1 Console.

- 4 -

McAfee

Fig-2

Click on the Log on the server. Type console log in password.

- 5 -

McAfee

The McAfee Server Task

Fig-3

Click on Scheduled tasks. The following Tasks are :-

Active Directory . DAT Update . DR Replication . InActive Agents . Purging Task (disabled) .

Select Active Directory and click on modify tasks..

- 6 -

McAfeeThe Active Directory modified settings as defined below (Fig-4 and Fig-5) :-

Fig-4

The settings for Active Directory task is like this as per NIC architecture. Click on next option.

- 7 -

McAfee

Fig-5

Click on finish.

- 8 -

McAfeeThe DAT Update modified settings as defined below (Fig-6 and Fig-7) :-

Fig-6

The settings for DAT Update task is like this as per NIC architecture. Click on next .

- 9 -

McAfee

Fig-7

Click on finish.

- 10 -

McAfee

DR Replication modified settings as defined below (Fig-8 and Fig-9) :-

Fig-8

The settings of DR Replication task is like this as per NIC architecture. Click on next.

- 11 -

McAfee

Fig-9

Click on finish.

Incremental replication is selected over here, because only the latest update will be replicated to the clients from the server.

- 12 -

McAfeeInActive Agents modified settings as defined as below (Fig-10 and Fig-11 ) :-

Fig-10

The settings of Inactive Agents task is like this as per NIC architecture. Click on next.

- 13 -

McAfee

Fig-11

Create a new site “Inactive agent” from directory. Period of inactivity will be change as per requirement. Action to perform will be “Move” to the created site “Inactive Agent”. Select the particular new created site for “Move computers with inactive agents to this site”. Click on finish.

- 14 -

McAfeeDifferent communication ports:-

Fig-12

The port settings will be like this as per NIC architecture.

- 15 -

McAfee

New Task Creation Method ( Fig-13 and Fig-14 ) :-

Fig-13 Click on create task.

- 16 -

McAfee

Fig-14

Expand the task type. Select particular task that you want to create. Write the task name. Enable the task. Set the schedule as per requirement.

- 17 -

McAfee

The McAfee Agent Task

New Task Creation ( Fig-15 to Fig-19 ) :-

Fig-15

Expand ePolicy Orchestrator and NIC-800000-EPO1 . Right click on Directory and click on scheduled task option.

- 18 -

McAfee

Fig-16

Write new task name . Select the task type that you want.

- 19 -

McAfee

Fig-17

Select Enable (schedule task runs at specific time). Click on settings.

This type of task is normally scheduled for daily updates. The client machine will take updates everyday at a particular scheduled time.

- 20 -

McAfee

Fig-18

Setting will be like this. Click ok.

- 21 -

McAfee

Fig-19

Click on Schedule. Uncheck Inherit. Schedule time Daily Start time 11:05:00AM Select Local time. Enable randomization as 30 minutes. Schedule task daily every 1 day(s). Click ok.

- 22 -

McAfee

Different Task Settings For all the NIC Operating Office’s Servers and Machines as shown below ( Fig-20 to 37) :-

Fig-20

Different tasks are: Deployment Update Daily DAT and Patches On Demand Scan for VSE8.0 On Demand Scan fro VSE8.5 Agent Wakeup Call Immediate Update of DAT and Patches

Click on Deployment Task.

- 23 -

McAfee

Deployment Task settings as defined below ( fig-21 to 23):-

Fig-21

Click on settings.

- 24 -

McAfee

Fig-22

Click ok.

- 25 -

McAfee

Fig-23

Click on schedule. The modified schedule has been made as per NIC architecture. Click ok.

- 26 -

McAfee

Agent Wakeup Call Task settings as defined below (fig 24 to 26):-

Fig-24

Click on Agent Wakeup Call . Click on Settings.

- 27 -

McAfee

Fig-25

- 28 -

McAfee

Fig-26

Click on schedule. The schedule is defined as per NIC architecture. Click ok.

Immediate Update of DAT and Patches settings as defined below (fig-27 to 28) :-

- 29 -

McAfee

Fig-27

- 30 -

McAfee

Fig-28

Above settings has been define as per NIC architecture.Click ok.

OnDemandScan for VSE8.5i settings as defined below ( fig-29 to 37) :-

- 31 -

McAfee

Fig-29

Click on settings.

- 32 -

McAfee

Fig-30

Click on detection.

- 33 -

McAfee

Fig-31

Click on Advanced.

- 34 -

McAfee

Fig-32

Click on Actions.

- 35 -

McAfee

Fig-33

Click on Unwanted Programs.

- 36 -

McAfee

Fig-34

Click on reports.

- 37 -

McAfee

Fig-35

Click on task.

- 38 -

McAfee

Fig-36

Click ok.

- 39 -

McAfee

Fig-37

Modified settings has been defined as per NIC architecture. Click ok.

- 40 -

McAfee

Assign Policies For All Operating Office’s Machines and Servers

Policy settings as defined below :-

Fig-38

Expand ePolicy Orchestrator > NIC-800000-EPO1 > Directory Select HO. Click on Policies on the right side. Click on HO Agent Policy.

- 41 -

McAfee

Fig-39

The above settings are modified as per NIC architecture. Click on events.

- 42 -

McAfee

Fig-40

The above settings are modified as per NIC architecture. Click on Logging.

- 43 -

McAfee

Fig-41

The above settings are modified as per NIC architecture. Click on Repositories.

- 44 -

McAfee

Fig-42 The above settings are modified as per NIC architecture. The repositories will be different for each and every sites as per NIC Architecture. Click on updates.

Normally we have selected four repositories for each RO’S . Here for HO we have selected four repository. The first preference will be that particular RO. In HO the first repository is ePO_NIC-800000-EPO1 . Other selected repositories are from East region. By this way the first repository will be the particular RO office and rest of the repositories will be from that region.

- 45 -

McAfee

Fig-43

The above settings are modified as per NIC architecture. Click on Proxy.

- 46 -

McAfee

Fig-44

The above settings are modified as per NIC architecture. Click apply to all. Click ok.

- 47 -

McAfee

Virus Scan Enterprise 8.5.0 policies as shown below:-

Fig-45

In above screenshots few policy owner is showing Global administrators. We didn’t change anything in these policies. Rest of the policy owner is showing admin. This policy are modified. Modified policy settings as shown below. Click on On-Access General Policies.

- 48 -

McAfee

On Access General Policiey Settings:-

Fig-46

Click on scriptscan. The above settings are modified as per NIC architecture.

- 49 -

McAfee

Fig-47

Click on blocking. The above settings are modified as per NIC architecture.

- 50 -

McAfee

Fig-48

Click on Messages. The above settings are modified as per NIC architecture.

- 51 -

McAfee

Fig-49

Click on Reports. The above settings are modified as per NIC architecture. Click on apply. Click close.

- 52 -

McAfee

Fig-50

Click on On-AccessLow-Risk Process.

- 53 -

McAfee

On–Access Low–Risk Process Settings:-

Fig-51

The above settings are modified as per NIC architecture. Click on detection.

- 54 -

McAfee

Fig-52

The above settings are modified as per NIC architecture. Click on Advanced.

- 55 -

McAfee

Fig-53

The above settings are modified as per NIC architecture. Click on Actions.

- 56 -

McAfee

Fig-54

The above settings are modified as per NIC architecture. Click on unwanted programs.

- 57 -

McAfee

Fig-55

The above settings are modified as per NIC architecture. Click on apply. Close the window. Open On-Access High Risk Process policy as shown in Fig45.

- 58 -

McAfee

On- Access High Risk Process Settings:-

Fig-56

The above settings are modified as per NIC architecture. Click on Detection.

- 59 -

McAfee

Fig-57

The above settings are modified as per NIC architecture. Click on advanced.

- 60 -

McAfee

Fig-58


- 61 -

McAfee

Fig-59 The above settings are modified as per NIC architecture. Click on Unwanted Programs.

- 62 -

McAfee

Fig-60

The above settings are modified as per NIC architecture. Click on apply. Close the window. Open User Interface Policy as shown in Fig-45.

- 63 -

McAfee

User Interface Policy Settings:-

Fig-61

The above settings are modified as per NIC architecture. Click on Password options.

- 64 -

McAfee

Fig-62

The above settings are modified as per NIC architecture. Click on apply. Close the window. Open Access protection Policy as shown in Fig-45.

- 65 -

McAfee

Access Protection Policy Settings:-

Fig-63

The above settings are modified as per NIC architecture. Click on Reports.

- 66 -

McAfee

Fig-64

The above settings are modified as per NIC architecture. Click on apply. Close the window. Rest of the VSE 8.5 policies settings are as Global Default. Open Rouge System Sensor Policy as shown in Fig-38.

- 67 -

McAfee

Rouge System Sensor 1.0.0 Policy Default Settings:-

Fig-65

The above settings are modified as per NIC architecture. Click on VSE8.0 and expand it.(Fig-38)

- 68 -

McAfee

Virus Scan Enterprise 8.0.0 Policy Settings:-

Fig-66

Click on Alert Manager policy.

- 69 -

McAfeeAlert Manager Policy Settings:-

Fig-67

The above settings are modified as per NIC architecture. Click on Additional Alerting options.

- 70 -

McAfee

Fig-68

The above settings are modified as per NIC architecture. Click on apply and close the window. Click on Access Protection Policy as shown in Fig-66.

- 71 -

McAfee

Access Protection Policy Settings:-

Fig-69

The above settings are modified as per NIC architecture. Click on file Share and Folder Protection.

- 72 -

McAfee

Fig-70

The above settings are modified as per NIC architecture. Click on reports.

- 73 -

McAfee

Fig-71

The above settings are modified as per NIC architecture. Click on apply and close the window. Open On-Access Process Policy as shown in fig-66.

- 74 -

McAfeeOn-Access Process Policy Settings:-

Fig-72

The above settings are modified as per NIC architecture. Click on Detection.

- 75 -

McAfee

Fig-73

The above settings are modified as per NIC architecture. Click on Advanced.

- 76 -

McAfee

Fig-74


- 77 -

McAfee

Fig-75

The above settings are modified as per NIC architecture. Click on Unwanted Programs.

- 78 -

McAfee

Fig-76

The above settings are modified as per NIC architecture. Click on apply and close the window. Open On-Access General Policy as shown Fig-66.

- 79 -

McAfeeOn-Access General Policy Settings:-

Fig-77

The above settings are modified as per NIC architecture. Click on Script Scan.

- 80 -

McAfee

Fig-78

The above settings are modified as per NIC architecture. Click on Blocking.

- 81 -

McAfee

Fig-79

The above settings are modified as per NIC architecture. Click on Messages.

- 82 -

McAfee

Fig-80 The above settings are modified as per NIC architecture. Click on Repots.

- 83 -

McAfee

Fig-81

The above settings are modified as per NIC architecture. Click on apply and close the window. Open User Interface Policy as shown in Fig-66.

- 84 -

McAfeeUser Interface Policy Settings:-

Fig-82 The above settings are modified as per NIC architecture. Click on password options.

- 85 -

McAfee

Fig-83

The above settings are modified as per NIC architecture. Click on apply and close the window. Open Unwanted Programs Policy as shown in Fig-66.

- 86 -

McAfeeUnwanted Programs Policy Settings:-

Fig-84

The above settings are modified as per NIC architecture. Click on User defined detection.

- 87 -

McAfee

Fig-85

The above settings are modified as per NIC architecture. Click on apply and close the window. Rest of the VSE 8.0 policies settings are set as global Default.

- 88 -

McAfee TASKS FOR THE LAPTOPS

Fig-86

Expand Directory. Expand HO. Click on Laptops and select Tasks. The Task’s names are also same like machines and servers. Only the schedule type is different. Open the Deployment tasks.

- 89 -

McAfee

Deployment Task Settings:-

Fig-87

The above settings are modified as per NIC architecture. Rest of the tasks settings are inherited .

- 90 -

McAfee

The Schedule of all Laptop’s Tasks are same like below.

Fig-88

The above settings are modified as per NIC architecture.

- 91 -

McAfee

Assigned Polices For Laptops

Fig-89

Expand Directory. Expand HO. Click on Laptops and select policies. Click on HO laptop agent.

Only Agent Policy setting for laptop is different from the all machines and servers ePO Agent Policy settings. We have taken HO laptop policy as for example.the ePO

- 92 -

McAfee

ePo Agent Policy Settings:-

Fig-90

The above settings are modified as per NIC architecture. Click on events.

- 93 -

McAfee

Fig-91

The above settings are modified as per NIC architecture. Click on Logging.

- 94 -

McAfee

Fig-92

The above settings are modified as per NIC architecture. Click on Repositories.

- 95 -

McAfee

Fig-93

The above settings are modified as per NIC architecture. The NAIFtp repository will be enabled for all laptops. Other 3 repositories will be from East region , because

HO is in East region. The same rule will be applicable for other RO’S laptops. Click on Updates.

- 96 -

McAfee

Fig-94

The above settings are modified as per NIC architecture. Click on apply and close the window.

- 97 -

McAfee

Daily Maintenance of ePo Console

Directory Search and Directory actions :

Fig-95

Expand NIC-800000-EPO1. Right click on Directory. Click on Search

- 98 -

McAfee

Fig-96

Select computers in a domain. Select Computer name as “starts with” . Select Domain Name as “not like” . Click on Search.

- 99 -

McAfee

Fig-97

We can find out particular machine details and all the machines of a particular site.

- 100 -

McAfee

Fig-98 Select Computers in specific group or site from “search for”. Select Group Name as “starts with”. Write any site name or group name in the “Value” column. Click on search. We can find out all the machines in a particular site or group by this method.

- 101 -

McAfee

Fig-99

Select computers with a specific DAT Version from “Search for”. We can find out particular machines with latest and older dat version by this method.

- 102 -

McAfee

Fig-100

By selecting duplicate computer names from “Search for” ,we can search the duplicate machines. Check the last connection time. Delete the older one.

- 103 -

McAfee

Fig-101

By Selecting Specific computers we can get any particular machine details. Click on the particular machine.

- 104 -

McAfee

Fig-102

We can get all the details of that particular machine by this method.

- 105 -

McAfee

Fig-103

Machine details has shown in the above screenshots.

- 106 -

McAfee

Move a Particular Client from One Site to Another Site :-

Fig- A

Expand NIC-800000-EPO1 . Right click on Directory and click on Search.

- 107 -

McAfee

Fig- B

Select “Computer in specific group or site” as search for.Select Operator as “Starts with”.Choose Value as “Inactive agent”.Click on Search.Select the client machine and right click on it. Click on “ move to”.

- 108 -

McAfee

Fig- C

Expand the Directory in Directory Browser. Expand ARO. Expand OO . Select Desktops. Click on ok .

Here the client was in Inactive Agents group. But normally it should be in ARO’s Desktops group.

- 109 -

McAfee

Send Agent Wakeup Call to a Particular Site:-

Fig-104

Expand the directory. Select particular directory. Right click on it and select Agent Wakeup Call.

- 110 -

McAfee

Fig-105

Set Agent randomization as 0 minutes. Select “Get full product properties”. Click ok.

- 111 -

McAfee

We can also send Agent Wakeup Call to any particular machine by this method.

Fig-106

Open the directory search. Search any machine from the directory. Right click on the search result. Select agent wakeup call. Send agent wakeup call.

- 112 -

McAfee

Send Agent Install Command From the Server:-

Fig-107

Expand NIC-800000-EPO1. Expand Directory. Select particular site . Right click on it and select Send Agent Install.

- 113 -

McAfee

Fig-108

Select “Only install on computers that do not have an agent” and “Force install over existing version” both. Type password.

- 114 -

McAfeeWe can do Send Agent Install by the same method.

Fig-109

Open directory search. Search particular computer. Select the computer from search results. Right click on it. Select send agent install. Finish the agent installation job as shown in Fig-108.

- 115 -

McAfee Installation process of New Packages

Fig-110 Expand NIC-800000-EPO1. Click on Repository. Click on Check in package.

- 116 -

McAfee

Fig-111

Click on next.

- 117 -

McAfee

Fig-112

Select Products and updates. Click on next.

- 118 -

McAfee

Fig-113

Browse the particular downloaded package form the server and enter the full path of that file. Click on next.

- 119 -

McAfee

Fig-114

Click on finish.

- 120 -

McAfee

Fig-115

Click on Check in NAP.

- 121 -

McAfee

Fig-116

Select Add new software to be managed. Click on next.

- 122 -

McAfee

Fig-117 Browse the .nap file from the same folder of the packager file. Select and open the file. Wait for few minutes .

- 123 -

McAfee

To Check the Patch is installed properly or not:-

Fig-118

Expand Repository. Expand Software Repositories Click on Master. Check the Version of the particular package.

- 124 -

McAfee

Manual Server Update :-

Fig-119

Expand NIC-800000-EPO1. Click on Repository. Click on Pull now in the right side. Select the NAIHttp. Click next.

- 125 -

McAfee

Fig-120

Select current. Select finish.

- 126 -

McAfeeReplicate the Latest Updates to The Particular site manually :-

Fig-121

Click on next.

- 127 -

McAfee

Fig-122

Select the repository. Click on next.

- 128 -

McAfee

Fig-123

Select Incremental replication. Click on finish.

- 129 -

McAfee

Fig-124

Click on close.

- 130 -

McAfee

Fig-125 Click on configure proxy . Select don’t use proxy. Click on ok.

- 131 -

McAfee Checking Repository Status from ePo Console :-

Fig-126 Expand Repository. Expand Software Repositories. Click on Distributed. Select any distributed repository. Click on edit.

- 132 -

McAfee

Fig-127 Click on option. Check the URL http://10.X.0.3/epo Port will be 80. Replicate UNC will be \\10.X.0.3\eposhare Domain will be nic-X0000-av1 Username will be the admin login username of the particular antivirus server. Type the password.

- 133 -

http://10.X.0.3/epo

McAfee

Checking Report’s Logs :-

Fig-128

Expand Reporting. Expand ePO Databases. Right click on ePO NIC-800000-EPO1(NIC-800000-EPO1) Click on connect.

- 134 -

McAfee

Fig-129 User name will be console log in id. Type password. Authentication type must be ePO authentication. HTTPS port number willl be 8443. Click ok.

- 135 -

McAfee

Fig-130

Expand Reports. Expand Anti-Virus. Expand Detection. Click on Action Summary By Top 10 Threat. Check the Detection List. Select any detection and expand it.

- 136 -

McAfee

Fig-131

Click on any detection.

- 137 -

McAfee

Fig-132

Action summary of top 10 threats has shown in above figure.

- 138 -

McAfee

Database Maintenance Procedure :-

Fig-133

Expand Reporting. Expand ePO Database. Click on ePO_NIC-800000-EPO1(NIC-800000-EPO1). Login into ePO Database. Click ok.

- 139 -

McAfee

Fig-134 Click on Events. Select Removal option. Select days of “All events that occurred more than”. Click on start. Wait for few minutes.

- 140 -

McAfee

Fig-135

For repairing the database select repair. Clcik on start. Wait for few miniutes.

- 141 -

McAfee

Database Backup From SQL Server:-

Fig-136

Go to start > programs > Microsoft SQL Server > Enterprise Manager.

- 142 -

McAfee

Fig-137 Expand Microsoft SQL Server Group. Expand NIC-800000-EPO1. Expand Databases.

- 143 -

McAfee

Fig-138

Right click on ePO_NIC-800000-EPO1 . Select all tasks. Select Backup Database.

- 144 -

McAfee

Fig-139

The database will be ePO_NIC-800000-EPO1. The name will be Epo_nic-800000-EPO1 backup . The Backup will be as Database- complete. Set the Destination path where the backup will be stored. Overwrite as “Append to media”. Click on ok.

- 145 -

McAfee

Weekly Database Maintenance Plan :-

Fig-140 The above settings are modified as per NIC architecture. Plan name will be Weekly ePO Backup. Select these database and ePO_NIC-800000-EPO1 .

- 146 -

McAfee

Fig-141 The above settings are modified as per NIC architecture. Open Optimization. Select Update the statistics used by the query optimizer. Shrink database when it grows beyond will be as per requirement. Time Schedule will be weekly on Sunday.

- 147 -

McAfee

Fig-142 The above settings are modified as per NIC architecture. Open integrity. Select Check database integrity. Select perform these tests before backing up the database or transaction log.

- 148 -

McAfee

Fig-143 The above settings are modified as per NIC architecture. Set the directory path. Select subdirectory for each database. The time period of Remove file older than will be variable as per requirement.

- 149 -

McAfee

Fig-144

The above settings are modified as per NIC architecture.

- 150 -

McAfee

Fig-145

The above settings are modified as per NIC architecture. Click on ok. Close the SQL Server console.

END

- 151 -

McAfee server console maintanence MODIFIED doc

Documents

Transcript of McAfee server console maintanence MODIFIED doc