MAXDATA 1U TFT Drawer MAXVIEW
-
Upload
geoffrey-rios -
Category
Documents
-
view
57 -
download
0
description
Transcript of MAXDATA 1U TFT Drawer MAXVIEW
MAXDATA 1U TFT DrawerMAXVIEW
Resolution 17”: 1280 x 1024 SXGA
OSD (On Screen Display) for configuration of display
TFT with analog HD-Sub 15 pol. interface
Integrated, country specific, keyboard with touchpad
touchpad with left and right mouse button
mechanical end switch turn off the display automatically
TFT Drawer
600 - 1000 mm rack size as standard
Little mounting depth 17”: 410 mm
Slided in TFT display is protected
Form fitted full extension telescopic slides
handle with Logo on the front
Scope of delivery :
1x 17” TFT drawer
1x VGA cable with SUB HD 15 connector
1x Mains cable
1x Cable for VGA/PS2/PS2
1x 19" mounting set
1x Two-point hinged cable router
2x Mounting bracket
1x Manual & Installation guide
Dimension Width 485 mm Depth 440 mm Height 44 mm
Weight 10,5 kg
Degree of protection IP 20
Material Sheet steel
Colour: Powder-coated textured RAL 9011
440
465 58
0
485
- 8
50
Features
Monitor SUBD15 (female)
Power IEC 320
Keyboard/Mouse
double PS/2-PS/2 (MiniDin6)
single USB1.1 (Typ B)
cable lengthpower cable 2 metres
VGA/PS-2/PS-2 3 meters
Connectors on the rear side
Touchpad
touchpad with integrated right click and scroll bar function and separate left and right mouse button
! physical characteristics !
wear-resistant lettering (Laser-burning-technology)
different country codes available
Ergonomicaly industry keyboard
PS/2 or USB
Optionally features (NumBlock- NB Versions):
-With seperate Numblock
-SUN Keyboard with Numbblock and SUN - Function keys
Keyboard
Mechanical Features
ergonomically handle on the frontpanel
full fitted telecopic railes
special safty hinghes
- easy open 30NM
- save close 40NM
Mechanical end switch turn off the display automatically
– 240V AC is only the display switched off
– 48 V DC is the complete drawer incl. the power supply
KVM-1 Station
CPU cable CPU cable
CPU cable KVM cable
Master KVM
Slave KVM Slave KVM
Connect the keyboard, monitor, and mouseto the master unit KVM connector, using the appropriate KVM cable.
Connect CPU port #1 on the master unit to the KVM connector on Slave unit #1 using a VGA PS/2 to VGA PS/2 expansion cable.
Connect the next sequential CPU porton the master unit to the KVM connectoron the next sequential Slave unit.
Connect the remaining Slave units to the master unit.
Cascade and operate the Maxview together with a VISTA KVM Switch
Installation
Installation of the Vista switch consists of the following steps:
It is recommended that the CPUs be powered off.
1. Connect the KVM station to the Vista Switch(Connect the power adapter).
2. Connect the CPUs to the Vista switch.
3. Sequentially apply power, boot the CPUs.
4. Verify keyboard, mouse and CPU operation.
Computer select
To select a computer from your keyboard, press and release the left <Ctrl> key and then type in the computer number (1-8).
Check if there is <NUM Lock> activated on the Keyboard!!!!
The MAXVIEW TFT Drawer has an numeric keypad. You can`t switch with the NUM Block.
You must press and release the left control key before you press the key that specifies the port number. You must also use the numeric
keys above the alphabetic keys, not those on the numeric keypad.
Computer Select on KVM “MASTER”
<Ctrl> x (x = 1, 2, 3, 4, 5, 6, 7, 8)Connects your keyboard,video monitor, and mouse to he selected computer
Computer Select on KVM “SLAVE”
1, select the cascaded Port <Ctrl> x (x = 1, 2, 3, 4, 5, 6, 7, 8 –)2, select the Port on the Slave KVM<Ctrl> <X> x (x = 1, 2, 3, 4, 5, 6, 7, 8)
Connects your keyboard,video monitor, and mouse to the selected computer.
I really appreciate your attention