MAXCMDCT

System Practices

C-DOT DSS MAX COMMAND DICTIONARY (This document is updated with respect to

Software Release 2_1_1_1)

Section No.400-430-0421 Issue 02 June 1998

1998, C-DOT Printed in India

C-DOT DSS MAX COMMAND DICTIONARY

(This document is updated with respect to Software Release 2_1_1_1)

C-DOT DSS MAX COMMAND DICTIONARY

ISSUE 01

JUNE 1998

ASADHA 2055

SERIES 400 : ADMINISTRATION

CSP SECTION NO.: 400-430-0421

THIS C-DOT SYSTEM PRACTICE REFERS TO THE C-DOT DIGITAL SWITCHING SYSTEM MAIN AUTOMATIC EXCHANGE (ABBREVIATED AS C-DOT DSS MAX IN THE REST OF THIS PUBLICATION).

THE INFORMATION IN THIS SYSTEM PRACTICE IS FOR INFORMATION PRUPOSES AND IS SUBJECT TO CHANGE WITHOUT NOTICE.

A REQUEST HAS BEEN INCLUDED ‘AT THE BACK OF THIS PUBLICATION FOR READER’S COMMENTS. IF THE FORM HAS BEEN REMOVED, COMMENTS MAY BE ADDRESSED TO THE DIRECTOR, (SYSTEMS), CENTRE FOR DEVELOPMENT OF TELEMATICS, 39, MAIN PUSA ROAD, NEW DELHI – 100 005.

© 1998 BY C-DOT, NEW DELHI

MAIN-MENU

1. ADMINISTRATION COMMAND CLASSES

2. MAINTENANCE COMMAND CLASSES

H:\HOME\MAX2111\WORD\MAXCMDCT.DOC Tuesday, June 16, 1998

ADMINISTRATION MAIN MENU

CLASS 1 SUBSCRIBER LINE MANAGEMENT COMMANDS UPDATE

CLASS 2 SUBSCRIBER LINE MANAGEMENT COMMANDS DISPLAY

CLASS 3 TRUNK MANAGEMENT COMMANDS UPDATE

CLASS 4 TRUNK MANAGEMENT COMMANDS DISPLAY

CLASS 5 ROUTING ADMINISTRATION COMMANDS UPDATE

CLASS 6 ROUTING ADMINISTRATION COMMANDS DISPLAY

CLASS 7 SOFTWARE INSTALLATION COMMANDS UPDATE

CLASS 8 SOFTWARE INSTALLATION COMMANDS DISPLAY

CLASS 9 TRAFFIC ADMINISTRATION COMMANDS UPDATE

CLASS 10 TRAFFIC ADMINISTRATION COMMANDS DISPLAY

CLASS 11 GENERAL ADMINISTRATION COMMANDS

CLASS 12 GRANT/(DE) ACTIVATE OPERATOR INITIATED SPECIAL SERVICES

CLASS 13 HUNT GROUP ADMINISTRATION COMMANDS UPDATE

CLASS 14 PRIVILEGED ADMINISTRATION COMMANDS

CLASS 15 PASSWORD AND TERMINAL MANAGEMENT COMMANDS

CLASS 16 PRIVILEGED PASSWORD AND TERMINAL MANAGEMENT COMMANDS

CLASS 17 BACKUP MANAGEMENT DISPLAY COMMANDS

CLASS 18 BACKUP MANAGEMENT UPDATE COMMANDS

CLASS 19 HUNT GROUP ADMINISTRATION COMMANDS DISPLAY

CLASS 20 HARDWARE INSTALLATION COMMANDS

CLASS 22 COMMAND FILE RELATED COMMANDS

CLASS 23 MISCELLANEOUS ADMINISTRATION COMMANDS

CLASS 24 CALENDAR ADMINISTRATION COMMANDS UPDATE

CLASS 25 CALENDAR ADMINISTRATION COMMANDS DISPLAY

CLASS 26 OPERATOR FEATURE UPDATE COMMANDS

CLASS 27 OPERATOR FEATURE COMMANDS DISPLAY

CLASS 28 OPERATOR HUNT GROUP COMMANDS UPDATE/DISPLAY

CLASS 29 SPECIAL DELETE COMMANDS CLASS

CLASS 30 CHARGE CALENDAR MANAGEMENT UPDATE

CLASS 31 NUMBER 7 UPDATE COMMANDS

CLASS 32 NUMBER 7 DISPLAY COMMANDS

CLASS 35 MISCELLANEOUS ADMINISTRATION DISPLAY COMMANDS

CLASS 41 CHARGE CALENDAR MANAGEMENT DISPLAY

ADMINISTRATION COMMAND CLASSES

6

1 Subscriber Line Management Commands Update

1 CRE-SUB CREATE A NEW SUBSCRIBER LINE

2 DEL-SUB DELETE AN EXISTING SUBSCRIBER LINE

3 MOD-SUB-TEN MODIFY SUBSCRIBER TERMINAL EQUIPMENT NUMBER

4 MOD-LIN-STA MODIFY LINE STATUS OF A LINE

5 MOD-LIN-CHAR MODIFY LINE CHARACTERISTIC OF A LINE

6 MOD-SUB-CHAR MODIFY SUBSCRIBER CHARACTERISTICS

7 MOD-SUB-FAC MODIFY SUBSCRIBER FACILITY

8 ADD-MSN-DN ADDING A MSN SUBSCRIBER TO AN ACCESS

9 MOD-CW MODIFICATION OF NUMBER OF CALL WAITING

10 UNFRZ-DIRNO UNFREEZE DIRECTORY NUMBERS UPTO GIVEN DATE

11 UNFRZ-GVN-DIRNO UNFREEZE GIVEN DIRECTORY NUMBER(S)

12 MOD-ANN-MODE MODIFY ANNOUNCEMENT MODE


7

2. Subscriber Line Management Commands Display

1 DISPL-SUB DISPLAY SUBSCRIBER RELEATED DATA

2 DISPL-DIRNO DISPLAY DIRECTORY NUMBERS FOR THE GIVEN STATUS

3 DISPL-DIRNO-RSRV DISPLAY RESERVED DIRECTORY NUMBERS

4 DISPL-SUB-LIST DISPLAY SUBSCRIBER LIST


8

3. Trunk Management Commands Update

1 CRE-TGP CREATE TRUNK GROUP

2 DEL-TGP DELETE A TRUNK GROUP

3 DEL-TRK DELETE TRUNKS FROM A TRUNK GROUP

4 ADD-TRK ADD TRUNKS TO A TRUNK GROUP

5 MOD-TGP-CHAR MODIFY TRUNK GROUP CHARACTERISTICS

6 ADD-TGP-BLG ADD TRUNK GROUP UNDER DETAILED BILLING


9

4. Trunk Management Commands Display

1 DISPL-TGP DISPLAY TRUNK GROUP CHARACTERISTICS

2 DISPL-TRK-CHAR DISPLAY TRUNK CHARACTERISTICS

3 DISPL-TGP-LIST DISPLAY TGP LIST


10

5. Routing Administration Commands Update

1 CRE-ROUT CREATE A ROUTE

2 CRE-SPL-ROUT CREATE A SPECIAL ROUTE

3 DEL-ROUT DELETE A ROUTE

4 MOD-ROUT-CHAR MODIFY ROUTE CHARACTERISTICS

5 MOD-ROUT-CODE MODIFY ROUTE CODE

6 MOD-GPA MODIFY GPA RESTRICTIONS


11

6. Routing Administration Commands Display

1 DISPL-ROUT-CHAR DISPLAY ROUTE CHARACTERISTICS

2 DISPL-ALL-ROUT DISPLAY ALL ROUTES

3 DISPL-TGP-ROUT DISPLAY TRUNK GROUP ROUTES

4 DISPL-GPA DISPLAY GPA RESTRICTIONS


12

7. Software Installation Commands Update

1 INSTL-PM TO INSTALL A NEW PATCH MODULE

2 REM-PM TO REMOVE A PATCH MODULE

3 VAL-PCH-LNK TO VALIDATE A PATCH LINK

4 INSTL-PPL TO INSTALL A PRIVATE PATCH MODULE


13

8. Software Installation Commands Display

1 DISPL-PM-INCORP DISPLAY A PATCH MODULE INCORPORATED

2 DISPL-PCH-LNK DISPLAY ALL MODULES OF A PATCH LINK

3 DISPL-SW-CONFIG DISPLAY SOFTWARE CONFIGURATION

4 PATCH-AUDIT PATCH AUDIT


14

9. Traffic Administration Commands Update

1 START-TRF-RPT START TRAFFIC REPORTS

2 STOP-TRF-RPT STOP TRAFFIC REPORTS

3 MOD-SMPLNG-FREQ MODIFY SAMPLING FREQUENCY

4 MOD-RPT-PERDTY MODIFY REPORT PERIODICITY

5 MOD-OUT-OPT MODIFY OUTPUT OPTIONS FOR TRAFFIC REPORTS

6 MOD-TGP-OBS MODIFY TGP OBSERVATION

7 MOD-SUB-OBS MODIFY SUBSCRIBER OBSERVATION

8 MOD-TRK-OBS MODIFY TRUNK OBSERVATION

9 MOD-HGP-OBS MODIFY HUNT GROUP OBSERVATION

10 MOD-ROUT-OBS MODIFY ROUTE OBSERVATION


15

10 Traffic Administration Commands Display

1 DISPL-TRF-OBS DISPLAY TRAFFIC OBSERVATION

2 DISPL-SUB-TRFINF DISPLAY SUBSCRIBER TRAFFIC INFORMATION

3 DISPL-TRK-TRFINF DISPLAY TRUNK TRAFFIC INFORMATION

4 DISPL-CDR DISPLAY CALL DETAILED RECORD

5 DISPL-TRF-RPT DISPLAY TRAFFIC REPORT

6 DISPL-MFSA-INF DISPLAY MF SIGNALLING ANALYSIS INFORMATION


16

11. General Administration Commands

1 CHG-OUT-DEV CHANGE OUTPUT DEVICES FOR RESULTS


17

12. Grant/(De) Activate Operator Initiated Special Services

1 GRNT-HTLN GRANT HOTLINE FACILITY

2 GRNT-ALARM GRANT SEMI AUTOMATIC ALARM

3 GRNT-DIV GRANT DIVERSION ON BUSY/NOANSWER FACILITY

4 GRNT-ABS-SRV GRANT ABSENTEE SERVICE FACILITY

5 GRNT-OCR-SUB GRANT SUBSCRIBER CONTROLLER O/G CALL RESTRICTION

6 GRNT-QING-FAC GRANT SUBSCRIBER QUEUING FACILITY

7 GRNT-MSN GRANT MSN FACILITY

8 WTD-SUB-FAC WITHDRAW SUBSCRIBER FACILITY

9 ACT-SUB-FAC ACTIVATE SUBSCRIBER FACILITY

10 DEACT-SUB-FAC DEACTIVATE SUBSCRIBER FACILITY

11 DEL-GVN-ALRM DELETE GIVEN ALARMS

12 DISPL-ALL-FAC DISPLAY ALL GRANTED SUBSCRIBER FACILITIES

13 DISPL-INFO-FAC INFORMATION ABOUT GRANTED SUBSCRIBER FACILITIES


18

13. Hunt Group Administration Commands Update

1 DEL-HGP DELETE A HUNT GROUP

2 CRE-HGP CREATE A HUNT GROUP OF TYPE 3

4 ADD-LINE-TOHGP ADD LINES TO A HUNT GROUP

5 REM-LINE-FRMHGP REMOVE LINES FROM A HUNT GROUP

6 MOD-HGP MODIFY HUNT GROUP CHARACTERSTICS


19

14. Privileged Administration Commands

1 CHMOD CHANGE MODE OF OPERATION

2 DISPL-COM-BILL DISPLAY COMMERCIAL BILLING RECORD

3 REM-TGP-BLG REMOVE TRUNK GROUP FROM DETAILED BILLING

4 DEL-FGP-FILE DELETE ALL FILES IN A FILE GROUP

5 MOD-SYS-DIRNO MODIFY SYSTEM DIRCTORY NUMBER

6 DISPL-SMON-REC DISPLAY SPEECH MONITORING RECORD


20

15. Password And Terminal Management Commands

1 SET-PWD SET PASSWORD

2 DISPL-OPR-CHAR TO DISPLAY OPERATOR CHARACTERSTICS

3 DISPL-TRM-ASSGN TO DISPLAY THE TERMINAL ASSIGN

4 DISPL-TRM-CHAR DISPLAY TERMINAL CHARACTERSTICS


21

16. Privileged Password And Terminal Management Commands

1 MOD-OPR-PWD MODIFY OPERATOR'S PASSWORD

2 ADD-OPR ADD OPERATOR

3 MOD-OPR-CHAR MODIFY OPERATOR'S CHARACTERSTICS

4 DEL-OPR TO DELETE/REMOVE AN EXISTING OPERATOR

5 ADD-TRM ADD TERMINALS TO THE EXCHANGE

6 MOD-TRM-CHAR MODIFY TERMINAL CHARACTERSTICS

7 DEL-TRM DELETE TERMINALS


22

17. Backup Management Display Commands

1 DISPL-FGP-FILE DISPLAY ALL FILES IN A FILE GROUP

2 DISPL-TAPE-INFO DISPLAY TAPE INFORMATION


23

18. Backup Management Update Commands

1 BACKUP BACKUP OF STANDARD FILE GROUPS ON TO TAPE

2 RESTORE TRANSFER OF STANDARD FILE GROUPS FROM TAPE TO DISK

3 COPY-OUT COPY SPECIFIED FILES & FILE GROUPS ON TO TAPE

4 COPY-IN COPY SPECIFIED FILES & FILE GROUPS FROM TAPE


24

19. Hunt Group Administration Commands Display

1 DISPL-HGP DISPLAY A HUNT GROUP INFORMATION


25

20. Hardware Installation Commands

1 EQUIP-TRML-CARD TO EQUIP TERMINAL CARD UNIT IN A FRAME

2 UNEQ-TRML-CARD TO UNEQUIP A TERMINAL CARD UNIT FROM A FRAME

3 EQUIP-MFC-CARD TO EQUIP MFC CARD UNIT IN A FRAME

4 EQUIP-SRV-CARD TO EQUIP A SERVICE CARD UNIT FROM A FRAME

5 UNEQ-SRV-CARD TO UNEQUIP A SERVICE CARD UNIT FROM A FRAME

6 EQUIP-FRAME TO EQUIP A FRAME IN A MODULE

7 UNEQ-FRAME TO UNEQUIP A FRAME IN A MODULE

8 EQUIP-MOD TO EQUIP A MODULE IN THE EXCHANGE

9 MOD-CLKSRC-EQPAG TO EQUIP/UNEQUIP A CLOCK SOURCE

10 DISPL-MOD-INFO DISPLAY INFORMATION ABOUT EQUIPPED MODULES

11 DISPL-TEN DISPLAY TERMINAL EQUIPMENT NUMBER FOR GIVEN STATUS

12 CRE-TST-CKT CREATE A TEST LINE CKT

13 DEL-TST-CKT DELETE A TEST LINE CKT


26

22. Command File Related Commands

1 CRE-CMD-FILE CREATE A COMMAND FILE

2 DEL-CMD-FILE DELETE A COMMAND FILE

3 DEL-CMD-ENT DELETE AN ENTRY FROM A COMMAND FILE

4 ADD-CMD-ENT ADD AN ENTRY IN A COMMAND FILE

5 DISPL-CMD-ENT DISPLAY ENTRY IN A COMMAND FILE

6 EXEC-CMD-FILE EXECUTE COMMEND FILE


27

23. Miscellaneous Administration Update Commands

1 MOD-SYS-PARAM MODIFY SYSTEM PARAMETER

2 MOD-XCOD MODIFY EXCHANGE CODE

3 MOD-RBM-XCOD MODIFY REMOTE BM XCODE

4 SET-SITE-ID SET SITE ID

5 EDIT EDIT A FILE

6 MOD-SPL-NUM CREATE/DELETE SPECIAL DIRECTORY NUMBER

7 AUDIT-FILE AUDIT IOP ISAM FILE

8 SHELL LIMITED SHELL

9 FDT FDT-CMD-FACILITIES

10 MOD-ANNC-TONE MODIFY ANNOUNCEMENT TO TONE MAPPING

11 MODE-LINE-PARAMS DISPLAY LINE PARAMETERS

12 CRE-RBMSA-CONFIG CREATE/MODIFY RBM CONFIGURATION

13 SET-SYS-TIM SET SYSTEM TIME


28

24. Calendar Administration Commands Update

1 ADD-CAL ADD AN ENTRY INTO SYSTEM CALENDAR

2 MOD-CAL MODIFY AN ENTRY IN SYSTEM CALENDAR

3 DEL-CAL DELETE AN ENTRY FROM SYSTEM CALENDAR

4 CAL-STAT CHANGE AND DISPLAY CALENDAR STATUS


29

25. Calendar Administration Commands Display

1 DISPL-CAL DISPLAY AN ENTRY OF SYSTEM CALENDAR

2 DISPL-CAL-LOG DISPLAY CALENDAR LOG

3 DISPL-CAL-LIST DISPLAY LIST OF COMMANDS TO BE EXECUTED

4 DISPL-OOD-LOG DISPLAY OOD LOG


30

26. Operator Feature Update Commands

1 CRE-LVN CREATE A NEW LVN

2 DEL-LVN DELETE AN EXISTING LVN

3 MAKE-LVN-SUP MAKE LVN SUPERVISOR FOR SERVICE GROUP(S)

4 CRE-SRV CREATE A NEW SERVICE

5 DEL-SRV DELETE AN EXISTING SERVICE


31

27. Operator Feature Commands Display

1 DISPL-LVN DISPLAY LVN CHARACTERISTICS

2 DISPL-LVN-ALL DISPLAY ASSOCIATION FOR ALL LVNS

3 DISPL-SRV DISPLAY SERVICE CHARACTERISTICS


32

28. Operator Hunt Group Commands Update

1 CRE-SRV-GRP CREATE A SERVICE GROUP

2 MOD-SRV-GRP MODIFY SERVICE GROUP CHARACTERISTICS

3 DEL-SRV-GRP DELETE A SERVICE GROUP

4 DISPL-SGP DISPLAY-SERVICE GROUP CHARACTERISTICS


33

29. Special Delete Commands Class

1 UNLOCK-FILE- GROUP

UNLOCK A GROUP OF ISAM FILES


34

30. Charge Calendar Management Update

1 MOD-DAY-TYP MODIFY DAY TYPE

2 MOD-TYP-DAY MODIFY INFORMATION CORR. TO A DAY TYPE

3 MOD-CRG-RTN MODIFY INFORMATION OF A CHARGE RATE NUMBER AND TARIFF CLASS

4 MOD-SSRV-CRG MODIFY SPECIAL SERVICE CHARGE

5 MOD-SUB-CRG MODIFY SUBSCRIBER CRG-RTN

6 FMT-BLG-CNTR FORMAT BILLING COUNTER FILE(S)

7 REPROT-BILL-CNTRS GENERATE BILLING COUNTER REPORT

8 MOD-CHB-CRG MODIFY CHARGE BAND CHARE RATE NUMBER ASSOCIATION


35

31 Number 7 Update Commands

1 CRE-SRS CREATE A SIGNALLING RELATION

2 MOD-SRS-CHAR MODIFY A SIGNALLING ROUTE SET

3 DEL-SRS DELETE SIGNALLING ROUTE SET

4 CRE-SPC CREATE SIGNAL POINT CODE FOR EXCHANGE

5 DEL-SPC DELETE SPC FOR THIS EXCHANGE

6 CRE-LS CREATE A LINK SET

7 DEL-LS DELETE SIGNALLING LINK SET

8 CRE-CGS CREATE CIRCUIT GROUP SET FOR THIS EXCHANGE

9 DEL-CGS DELETE CIRCUIT GROUP SET

10 CRE-LSB CREATE LINK SET BUNDLE FOR THIS EXCHANGE

11 DEL-LSB DELETE LINK SET BUNDLE

12 MOD-LSB-CHAR MODIFY LINK SET BUNDLE CHARACTERISTICS

13 ADD-DEL-LNK ADD OR DELETE LINK

14 MOD-LS-CHAR MODIFY LINK SET CHARACTERISTICS


36

32. Number 7 Display Commands

1 DISPL-SRS DISPLAY SIGNALLING ROUTE SET INFORMATION

2 DISPL-SPC DISPLAY SIGNAL POINT CODE

3 DISPL-LS DISPLAY LINK SET

4 DISPL-CGS DISPLAY CIRCUIT GROUP SET

5 DISPL-LSB DISPLAY LINK SET BUNDLE


37

35. Miscellaneous Administration Display Commands

1 DISPL-SYS-DIRNO DISPLAY SYSTEM DIRECTORY NUMBERS

2 DISPL-SYS-PARAM DISPLAY SYSTEM PARAMETERS

3 DISPL-XCOD DISPLAY EXCHANGE CODES

4 DISPL-RBM-XCOD DISPLAY REMOTE BM XCODE

5 DISPL-REC TO DISPLAY DATABASE RECORD SYMBOLICALLY

6 DISPL-SYS-LIM DISPLAY SYSTEM LIMIT FILES

7 DISPL-CALL-INFO DISPLAY CALL INFORMATION

8 DISPL-TRANS DISPLAY TRANSACTION FILE INFORMATION

9 DISPL-ANNC-TONE DISPLAY ANNOUNCEMENT TO TONE MAPPING

10 DISPL-LINE- PARAMS DISPLAY LINE PARAMETERS

11 DISPL-RBMSA- CONFIG

DISPLAY RBMSA CONFIGUATION

12 DISPL-ALL DISPLAY ALL

13 DISPL-NUM-NAME DISPLAY NUMBER TO NAME MAPPING

14 DISPL-XCHG-MTR DISPLAY EXCHANGE METER


38

41. Charge Calendar Management Display

1 DISPL-DAY-TYP DISPLAY DAY TYPE

2 DISPL-TYP-DAY DISPLAY INFO OF ALL TYPES OF DAYS

3 DISPL-CRG-RTN DISPLAY INFO OF CHARGE RATE NUMBERS

4 DISPL-SSRV-CRG DISPLAY SPECIAL SERVICE CHARGE

5 DISPL-SUB-CRG DISPLAY SUBSCRIBER CRG-RTN

6 DISPL-TGP-MTR DISPLAY TRUNK GROUP METER

7 DISPL-BILL-REC DISPLAY BILLING RECORD OF A SUBSCRIBER/TRUNK GROUP

8 DISPL-CHB-CRG DISPLAY CHARGE BAND – CHARGE RATE ASSOCIATION

9 DISPL-SUB-MTR DISPLAY SUBSCRIBER’S LATEST METER INFORMATION

MAINTENANCE MAIN MENU

CLASS 1 SWITCHING UNIT STATUS MAINTENANCE COMMANDS

CLASS 2 SWITCHING UNIT ROUTINING MAINTENANCE COMMANDS

CLASS 3 TERMINAL STATUS CHANGE COMMANDS

CLASS 4 SYSTEM INITIALISATION COMMANDS

CLASS 5 TERMINAL MAINTENANCE FORCE STATUS COMMANDS

CLASS 6 SWITCH MAINTENANCE FORCE STATUS COMMANDS

CLASS 7 TERMINAL MAINTENANCE ROUTINING COMMANDS

CLASS 8 DISPLAY STATUS COMMANDS

CLASS 9 DIGITAL TRUNK MAINTENANCE STATUS COMMANDS

CLASS 11 SYSTEM HEALTH COMMANDS DISPLAY

CLASS 12 NUMBER 7 MAINTENANCE UPDATE COMMANDS

CLASS 13 NUMBER 7 MAINTENANCE DISPLAY COMMANDS

40

1. Switching Unit Status Maintenance Commands

1 PUT-SWU-INS PUT SWITCHING UNIT IN SERVICE

2 PUT-SWU-OOS PUT SWITCHING UNIT OUT OF SERVICE

3 INTCHG INTERCHANGE INSERVICE ACTIVE & STANDBY UNITS

4 PUT-SRV-INS PUT SERVICE CIRCUIT IN SERVICE

5 PUT-SRV-OOS PUT SERVICE CIRCUITS OUT OF SERVICE

6 CHNG-SWU-STAT CHANGE SWITCH UNIT STATUS

41

7 SEL-CLK-SRC SELECT CLOCK

8 PUT-NSC-CLK-INS PUT NSC CLOCK INSERVICE

9 PUT-NSC-CLK-OOS PUT NSC CLOCK OUT OF SERVICE

42

2. Switching Unit Routining Maintenance Commands

1 AUDIT AUDIT ON DATA IN A PARTICULAR MODULE

2 DGN-SWU TO DIAGNOSE A SWITCH UNIT

3 TST-SWU TO TEST A SWITCH UNIT

4 DGN-NSC-CLK DIAGNOSE NSC CLOCK SOURCE

43

3. Terminal Status Change Commands

1 PUT-TRM-INS TO PUT TERMINAL INSERVICE

2 PUT-TRM-OOS TO PUT TERMINAL OUT OF SERVICE

3 RTR-ARM TO RETIRE VISUAL IDENTIFICATION OF AN ALARM

4 PUT-TGP-INS PUT TRUNK GROUP INSERVICE

5 PUT-TGP-OOS PUT TRUNK GROUP OUT OF SERVICE

6 PUT-HGP-INS PUT HUNT GROUP IN SERVICE

7 PUT-HGP-OOS PUT HUNT GROUP OUT OF SERVICE

44

8 ADD-DTK-RBM ADD DIGITAL TRUNK TO AN RBM

45

4. System Initialisation Commands

1 INIT-SYS TO INITIALISE SYSTEM BY RELOADING

2 INIT-MOD TO INITIALISE MODULE BY RELOADING

3 INIT-IOP TO INITIALISE IOP

4 CHNG-SW-REL CHANGE SOFTWARE RELEASE

5 ABORT-SBY ABORT STANDBY DOWNLOADING

46

5. Terminal Maintenance Force Status Commands

1 FRC-TRM-INS TO FORCE TERMINAL INSERVICE

2 FRC-TRM-OOS TO FORCE TERMINAL OUT OF SERVICE

3 KILL-CALL TO KILL A CALL

4 FRC-TRML-CARD-INS FORCE TERMINAL CARD INSERVICE

5 FRC-TRML-CARD-OOS FORCE TERMINAL CARD OUT OF SERVICE

47

6. Switch Maintenance Force Status Commands

1 FRC-SWU-INS FORCE SWITCH UNIT INSEVICE

2 FRC-SWU-OOS FORCE SWITCH UNIT OUT OF SERVICE

3 FRC-SRV-INS FORCE SERVICE CIRCUIT INSERVICE

4 FRC-SRV-OOS FORCE SERVICE CIRCUIT OUT OF SERVICE

5 FRC-NSC-CLK-INS FORCE NSC CLOCK INSERVICE

6 FRC-NSC-CLK-OOS FORCE NSC CLOCK OUT OF SERVICE

48

7. Terminal Maintenance Routining Commands

1 TST-TRM TEST TERMINAL

2 TST-SRV TEST SERVICE CIRCUITS

3 TST-TGP TEST TRUNK GROUP

4 TST-HGP TEST HUNT GROUP

5 TST-TRML-CARD TEST TERMINAL CARD

49

8. Display Status Commands

1 DISPL-SWU-STATUS DISPLAY SWITCH UNIT STATUS

2 DISPL-SWU-ALL DISPLAY STATUS FOR A UNIT TYPE IN ALL MODULES

3 DISPL-TRM-STATUS DISPLAY TERMINAL STATUS

4 DISPL-ARM-LIST DISPLAY LIST OF ALARMS PRESENT IN EXCHANGE

5 DISPL-SYS-ALL DISPLAY SYSTEM STATUS

6 DISPL-SRV-STATUS DISPLAY SERVICE CIRCUIT STATUS

50

7 DISPL-TGP-STATUS DISPLAY TRUNK GROUP STATUS

8 DISPL-LSCNT-OOS DISPLAY COUNT OF FAULTY LINES AND SERVICE CIRCUITS

9 DISPL-TRCNT-OOS DISPLAY COUNT OF FAULTY TRUNKS

10 DISPL-MOD-STAT DISPLAY MODULE STATUS

11 DISPL-TRM-ALL DISPLAY STATUS OF ALL TERMINALS

12 DISPL-IOP-LEVEL DISPLAY IOP LEVEL AND STATUS

13 DISPL-HGP-STATUS DISPLAY HUNT GROUP STATUS

14 DISPL-RBM-DTKS DISPLAY RBM DIGITAL TRUNKS

51

15 DISPL-SRV-ALL DISPLAY STATUS FOR ALL SERVICE CIRCUITS

16 DISPL-CRNT-CLK-SRC

DISPLAY CURRENTLY TUNED CLOCK SOURCE

17 DISPL-TRML-CARD-STS

DISPLAY TERMINAL CARD STATUS

52

9. Digital Trunk Terminal Card Maintenance Status Commands

1 PUT-TRML-CARD-INS PUT TERMINAL CARD INSERVICE

2 PUT-TRML-CARD-OOS

PUT TERMINAL CARD OUT OF SERVICE

53

11. System Health Commands Update

1 DISPL-MEM DISPLAY MEMORY OF CONTROLLER PROMS/BP/AP/SSC

2 DISPL-PROM-CONFIG DISPLAY PROM CONFIGURATION

3 DISPL-LINK-HEALTH DISPLAY LINK HEALTH COUNTERS FOR A SPECIFIC LINK

54

12. Number 7 Maintenance Update Commands

1 TST-SGNL-LNK TEST SIGNAL LINK

2 MOD-LS-STS MODIFY LINK SET STATUS

3 MOD-LNK-STS MODIFY LINK STATUS

4 MOD-BLK7-STS MODIFY BLOCK 7 STATUS

55

13. Number 7 Maintenance Display Commands

1 DISPL-LS-STS DISPLAY LINK SET STATUS

2 DISPL-NET-STS DISPLAY NETWORK STATUS

3 DISPL-BLK7-STS DISPLAY BLOCK 7 STATUS

MAXCMDCT

Documents

Transcript of MAXCMDCT