Matte Liquid Lipstick Recipe Phase A INCI Percent Grams...

2
Phase A INCI Percent Grams Isododecane Isododecane 51% 31 Flake Resin Trimethylsiloxysilicate (and) Polypropylsilsesquioxane 16% 10 Dimethicone 1.5 Dimethicone 18% 11 Phase B Nylon 12 Nylon 12 2% 1 Silica Dimethyl Silylate Silica Dimethyl Silylate 5% 3 Silica Microsphere Silica 2% 1 Phase C Wax (either Beeswax or Sunflower Wax) Cera Alba (Beeswax) or Helianthus Annuus (Sunflower) Seed Wax 5% 3 Preservative Cap-2 Caprylyl Glycol, Phenoxyethanol, Hexylene Glycol 2-3 drops 2-3 drops Total 100% 60 Matte Liquid Lipstick Recipe Instructions: 1. Gather your tools and rinse with alcohol before use. 2. Weigh your ingredients. 3. Mix Phase A ingredients together. Mix until completely dissolved. This process will take 5-10 minutes. 4. Add Phase B to Phase A mixture. 5. Use spatula or Mini Mixer mix until you see no more clumps. 6. Heat Phase C to 80 degrees Celsius over a double boiler. 7. Heat Phase A+B to 70 degrees Celsius. 8. Take off heat. Add Phase A+B to Phase C with mixing. 9. Add 2 drops of Preservative Cap-2 and continue mixing until temperature reduces to 45 degrees Celsius (warm to the touch). 10. Transfer the base into a zip lock bag. 11. Snip off the corner and fill in air tight containers. 1 TKB TRADING, LLC 1101 9th Avenue Oakland, CA 94606 Tel: 510-922-9027 www.tkbtrading.com

Transcript of Matte Liquid Lipstick Recipe Phase A INCI Percent Grams...

Phase A INCI Percent Grams

Isododecane Isododecane 51% 31

Flake Resin Trimethylsiloxysilicate (and)

Polypropylsilsesquioxane

16% 10

Dimethicone 1.5 Dimethicone 18% 11

Phase B

Nylon 12 Nylon 12 2% 1

Silica Dimethyl Silylate Silica Dimethyl Silylate 5% 3

Silica Microsphere Silica 2% 1

Phase C

Wax (either Beeswax or

Sunflower Wax)

Cera Alba (Beeswax) or Helianthus

Annuus (Sunflower) Seed Wax

5% 3

Preservative Cap-2 Caprylyl Glycol, Phenoxyethanol,

Hexylene Glycol

2-3 drops 2-3 drops

Total 100% 60

Matte Liquid Lipstick Recipe

Instructions:

1. Gather your tools and rinse with alcohol before use.

2. Weigh your ingredients.

3. Mix Phase A ingredients together. Mix until completely dissolved. This process will take 5-10

minutes.

4. Add Phase B to Phase A mixture.

5. Use spatula or Mini Mixer mix until you see no more clumps.

6. Heat Phase C to 80 degrees Celsius over a double boiler.

7. Heat Phase A+B to 70 degrees Celsius.

8. Take off heat. Add Phase A+B to Phase C with mixing.

9. Add 2 drops of Preservative Cap-2 and continue mixing until temperature reduces to 45 degrees

Celsius (warm to the touch).

10. Transfer the base into a zip lock bag.

11. Snip off the corner and fill in air tight containers.

1

TKB TRADING, LLC 1101 9th Avenue

Oakland, CA 94606 Tel: 510-922-9027

www.tkbtrading.com

To color your creation, add about 1.5 of powdered dye and about 0.3 grams of titanium dioxide

(prewetting with Dimethicone 1.5 is recommended) and to about 9 grams of uncolored base. This

will make one full-sized lip gloss.

Limit of Liability and Disclaimer of Warranty:

The information provided herein is provided "as is." TKB Trading, LLC makes no representation or

warranties with respect to the accuracy or completeness of the contents of these instructions and

specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

All recommendations and suggestions are made without guarantee, since the conditions of use are

beyond our control. In no event shall TKB Trading, LLC be liable for damages of any nature arising out

of the use or reliance upon the information.

Consumers are encouraged to observe all measures of cleanliness and hygiene and to “patch test” all

ingredients and products to assure that they will not have unfavorable results. In all cases, consumer

should discontinue use of any item which causes irritation.

COPYRIGHT 2017 All contents copyright by TKB Trading, LLC.

All rights reserved. No part of this document or the related files may be reproduced or transmitted in

any form, by any means (electronic, photocopying, recording, or otherwise) without the prior written

permission of the publisher.