MATHEW CV iii
-
Upload
mathew-chacko -
Category
Documents
-
view
298 -
download
1
Transcript of MATHEW CV iii
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
Key Experience: (18+years)
Eighteen (18+) years experience in Project Materials Procurement (Major Materials and Equipment), Logistics, Supply chain & Subcontract (Oil & Gas 12.5 years with Saudi Aramco in Saudi Arabia, Iron & Steel 1.7 years with Vizag Steel Plant India, around (1) one year experience with Mining Industry in Australia – NSW and (1.6) years experience with New LNG Train Project, Client Sonatrach GNL2K BP 471 Skikda 21000 in Algeria, and (1) year experience with Zubair Oil Field-ENI-IRAQ, Client South Oil Company Contractor (JV) of Sicim S.p.A – Drake&Scull Abu Dhabi: Present - Ichthys Project Onshore LNG Facilities at Darwin in Australia, Contractors JKC Australia LNG Pty Ltd. (JV) of JGC/KBR/Chiyoda.
Codes & Standards Proficiency:
ASME, ANSI, ASD, ASTM, API, BS, IS. Saudi Aramco: SAMSS, SAER, SAES, SAEP, SAIR
Professional Experience:
Procurement: Procurement structure, process and technology evaluation, Assessment of current
procurement spend, Procurement performance measurement, Procurement risk assessment, determining supplier qualifications, Assessment of the supply market, Selecting and confirmation of suppliers, Facilitating supplier negotiations, Designing, communicating and analysing RFPs and RFQs and Monitoring procurement benefits
Project:
Engineering and execution, Subcontract Management, Review of Engineering and Execution Status and Monitoring Project Schedule for various EPC Projects
Project Type:
Refinery & Process Plants / Oil & Gas / Power (Coal & Gas Based) / SteelTraining / Course Attended:
Stress Analysis (Steel & Piping) Financial Risk Management ISO 9000: 2004 Statistical Quality System & its Application
Experience in Oil &Gas. : Total Seventeen (17+) years in Abroad 12.5 years With Saudi Aramco in (Saudi Arabia) 1.6 years with Sonatrach Algeria - New LNG Train Project and (1) Year with South Oil Company (SOC) Iraq-Zubair Oil Field Development Project and present (18) Months Ichthys Project Onshore LNG Facilities at Darwin in North West Australia (JV) of JGC/KBR/Chiyoda.
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 1 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
A. From August. : 1997- 2009 (12.5 years) in Saudi Arabia
Company Name. : AL HAMMAM COMPANY (P) Ltd. (EPC) Contractor
Client Name. : SAUDI ARAMCO
Position Held. : Manager- Project Materials Procurement
B. From February : 2010 - December- 2010 (NSW-Australia)
Company Name. : MINING COMPANY Joy Inc.Position Held. : Dy. Manager- Procurement & Subcontract
C. From January : 2011- April 2012 - New LNG Project (Algeria) Company Name. : Dodsal Engineering & Construction Pte Ltd. Position Held. : Sr. Engineer- Procurement and Subcontract
D. From September : 2012-August 2013-Zubair Oil Field - ENI- IRAQCompany Name. : Drake & Scull Oil & Gas Division-Abu Dhabi Position Held. : Project Procurement Manager
E. From October : 2013-Present-Ichthys Project Onshore LNG FacilitiesCompany Name. : JKC Australia LNG Pty Ltd (JKC) Darwin- Australia Position Holding. : Sr. Engineer- Procurement & Subcontract
F. From January. : 1996 - 1997July (Vizag Steel Project, Andhra Pradesh, India.)Company Name. : JAYKAY ENGINEERS (P) Ltd. Position Held. : Engineer- Procurement
EXPERIENCES:
Eighteen (18+) years experience in the field of EPC, Design, Engineering, Procurement & Construction (From Concept- Commissioning), Projects include Upgrade of Refineries, LNG Facilities, Bulk Plants, Tank-form Areas, GOSP Support Facilities, Petrochemicals, Power Plants and Steel Industries.
Responsible for the preparation and interpretation of Material Procurement statements, Budgets, Cost analysis, Project feasibility studies, Procurement & Logistic plan and other related reports to provide management with timely and meaningful information.
Fifteen (15+) years prime experience in preparation of (PR/MR) Purchase/Material Requisitions for Project Materials & Equipment, Civil, Mechanical, Electrical and Instrumentation as per international/ Saudi Aramco specifications and requirements. Proceeding enquiries (RFQ) to obtain techno commercial offer from reputed Vendors and Manufacturers globally, evaluating proposal technically & commercially as per
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 2 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________ projects requirements including price negotiations and Vendor assessments (For LSTK and LSPB projects) Finalizing Vendors & Subcontractors, preparing and tracking of purchase orders as per International / Saudi Aramco standard & requirements. Follow up and collection of NMR 601, 602, 603 and SPDP, from respective Vendors in order to submit client approval. Preparation and submission of (IAP) Inspection Assignment package and final disposal package to client in order close the Projects Procurement.
Excellent interpersonal, communication, team building, people management, conflict management, analytical and problem solving skills, Experience in working with people from different ethnic backgrounds. The good command of business written, reporting and spoken English, Communication skills, Computer literate and well organized with systematic work approach
A. Experience in Major Equipments Procurement Pressure Vessels & Heat Exchangers - As per Aramco standard and
specification, placing order to subcontractor, tracking & monitoring
Heavy Pumps – As per project requirements and approved data sheet (Sulfur feed Pumps & Hot water Pumps, etc.)
Compressors - As per project requirements and approved data sheet (Rotary type Oil free Compressor with skid mounted)
Boiler and Accessories – Experience is less
Procuring of Heavy Lifting Equipments - Crane having capacity in different
tonnage, Forklift, Lifting tools and equipment including different size of Spreader Beam, Sling d shackles selection of hydraulic trailers etc.
Procuring of Jib Cranes, Generators, Vehicle & Equipments, required for Projects and Constructions in (Oil & Gas) sector – As per Saudi Aramco/international requirements and specifications
B. Experience in Sub Contractor finalization Project Design Sub Contractor NDT – Contractor Scaffolding - Contractor Heavy Lifting – Sub Contractor Chemical – Cleaning Sub Contractor Insulation – sub Contractor Fireproofing Sub Contractor Water Proofing Sub Contactor Asphalting – Sub Contractor Roofing Sub Contractor Fire Alarm System Sub Contractor HVAC – System – Sub Contractor VESDA – System – Sub Contractor Subcontractors for Civil, Mechanical, Electrical and Instrumentation works.
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 3 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________ Finalizing, Monitoring, Controlling and tracking sub contractors for various EPC project.Experience in Civil Materials Procurement:
Reinforcing Bars – Procuring as per Saudi Aramco Standard Anchor Bolts – Different type, as per Aramco Standard & Specification RTR Pipes & Fittings – As per Saudi Aramco standard Expansion joint - As per Saudi Aramco Specification Structural Steel - As per Approved MR & MTO Aramco Specification Ladder Rings – As per Aramco Specification Manhole Covers- As per Aramco Specification Catch Basin – As per Aramco standard Plywood and Lumber- As per site requirements Ready Mix Concrete – As per Saudi Aramco standard Doors windows and Frame – Hollow Metal, Blast Resistant, Wood and required
hardware as per Aramco requirements All Interior Items &Toilet Accessories - As per Saudi Aramco standard Finalizing the HVAC system, Fire alarm system & VESDA system, materials
as well as subcontractor Finalizing the materials and subcontractor for Roofing, Insulation, Fireproofing,
Block work and waterproofing Finalizing and procuring required Lighting fixers as per Saudi Aramco standard
and specification from approved manufacturer and suppliers Finalizing kitchen equipment and suppliers as per Aramco standard and finalizing
subcontractor. Well familiar with all civil consumables required for construction according to
Saudi Aramco requirements and preparing purchase orders (LPO) Finalizing the sub contractor for excavation and backfilling, tracking and
monitoring the activities on daily basis. Procuring and hiring all vehicles and equipments required for construction
including Scaffolding and other support services.
Experience in Mechanical Materials Procurement:
Pipes – Different size CS & SS as per Saudi Aramco standard from approved manufacturer/ stockiest under respective 9 Com and Ccc code
Flanges – Different Class, specification and size, from approved manufacturer/supplier as per project requirement and approved MR/MTO
Fittings – Different specification and size as per approved MTO and MR from approved manufacturer and supplier
Valves – Including Pressure Relief valves, Pressure Regulators, Control Valves different size and class as per approved MR /MTO from approved manufacturer/supplier ( all kind of valves different class & Size including MOV)
Spectacle Blind – Different size and specification as per approved MR /MTO Gasket – As per approved MR/ MTO from approved manufacturer Stud Bolts – As per Approved MR / MTO & Aramco requirements Fire Fighting Equipment and Hose reels – As per Aramco requirements Y- Strainer- From approved manufacturer /supplier within the time limit Conical – Strainer – Procuring from approved source as per standard
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 4 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
Steam Strap - From approved manufacture with Aramco GI All consumables and tools including Paints, Garnets, Welding Electrode different size, filler wires, Cutting Machine, Grinding Machine, cutting wheels, Grinding wheels, Fire Blanket Lifting Equipment and welding accessories as per Saudi Aramco standards, specifications and requirements.
Experience in Electrical Materials Procurement: Electrical Cables – Low voltage and Medium voltage as per Approved MR /
MTO Aramco standard / international standard Cable Trays and Fittings different size – As per Aramco Requirements Conduit and Fittings PVC Coated - per area classification requirements Lighting Fixers – As per the IFC and Armco standard as well as area
classification, explosion proof /weatherproof depends on the class & zone Junction Boxes – As per Aramco Standard and area classification Panel Boards – Explosion proof/ weatherproof as per IFC and area
classifications MOV – Local Control Panels - As per site requirements /approved IFC and
Material Requisition Relay Panels- As per drawing and specification from approved manufacturer. Commissioning assistance/ services: Finalizing with Saudi Aramco approved
Vendors Beacon & Horn – As per approved Material Requisition from designer Lighting Poles – As per Aramco requirements from approved Vendor Circuit Breakers- Different type as per site requirements and MTO Emergency Eyewash – As Per Aramco requirements
Procuring of necessary equipments, tools, consumables including calibration services required for field constructions. Floating enquires preparing and placing required purchase orders, finalizing adequate Vendors & Sub contractors for field assistance and commissioning services.
Experience in Instrumentation Materials Procurement: Instrumentation Cables – Different size as per Aramco standard and area
classification from approved manufacturer overseas Transmitters – Temperature transmitters, Differential Pressure Transmitters,
Flow indicator Transmitters and analyzers etc. Orifice Plates – As per Aramco standard and project requirements Flow Conditioner/ Profile plates – As per Aramco and Project requirements
from overseas suppliers/manufactures Level gauges & Level indicators – As per approved data sheet Temperature Gauges – As per the approved MR and MTO data sheet RTD and Thermo well – As per the specification and approved ISS sheet Temperature Gauges with Thermo well – As per approved ISS Sheet Combustible Gas detector- Basis on the approved ISS sheet Solenoid Operated Valves – As per the approved ISS Sheet Pressure Gauges – As per approved MR and ISS sheet Pressure Regulators – As per approved ISS Sheet and MR Process Control System (PCS) – ESD & DCS
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 5 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________ Procuring all kinds of tools and tackles, testing and commissioning equipments, calibration equipments, consumables, field assistance and commissioning and precommissioning subcontractors and Vendors etc
Projects Completed: Job Title: Procurement Manager
SL # Contract # Projects Name & Locations USD$
Million Duration
1 6600019758
Sulfur Emission Control Project at Berri Gas Plant: Year: 2007 -2009
The project includes detailed design, procurement, construction and commissioning of Degassing Project. It is an environment protection project that reduces the H2S level from recovered molten sulfur. The control system package includes Honeywell TDC 3000 and Triconex TMR PLC.
80.5 2 years
2 6600018741
Yanbu Gas Plant Expansion Utility and Building Project :Year: 2005-2007
This project includes procurement, Construction, transportation and erection of 1 x 480T Boiler, Erection of 1 x Flue stack, 1x Boiler economizer, 7 x Air & Gas ducts, including Civil foundations, operation and security building fully furnished.
35.00 2 years
3 44353/000Bulk Plant Modernization Projects – Central Region-BI # 37581,82 ,83,84 : Year From -1997
This project includes but not limited to the following activities. Product Recovery TankAnd associated Piping.Expansion Of Existing Electrical SystemTank Farm Dike WallsNew Terminal Management SystemConstruction Of 3 Concrete Oily Water SumpsInstallation of Vertical Maximum Flow Pump & Effluent Water Pump.Pump Stations
55.5 2 years
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 6 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
Installation Of New Unloading FacilitiesOily Water Separation SystemPipeline Metering & Proving System
4 6600007368
Integration of New Power & Steam Generation (COGEN) Riyadh Refinery
Three existing Combustion Gas Turbine at Riyadh Refinery, shall each be fitted with Heat Recovery SteamGenerator (HRSG) to utilize waste heat(gas) for the production of high pressure steam
28.5 2 years
5 6600001741
Crude and Vacuum Heater Replacement Project –(CVHR) Riyadh Refinery
This project scope includes foundation for Heaters ,fuel skids, process vessels and Hot oil heater, Stacks, Concrete paving,Oily water system, Pipe rack/Pipe supports/Platforms, Structural works, CS piping, P5 and P9 special Alloy piping, Steam tracing, Hydrostatic testing, Insulation, Crude Heater and Vacuum Heater Installation, Dry out, Fuel Oil Skids Erection, Vacuum Tower Modification, Post Weld Heat Treatment, Tie-ins, Electrical and Instrumentation works.
35.8 2 years
6 4400691/00 Royalty Crude Metering Station at Riyadh Refinery (Details upon request blow & all)
1.2 1 year
7 6600008082 Revamp of Crude Heaters & Debutanizer at Rabigh Refinery- Shutdown Work 14.5 90 Days
8 6600007992 Fire and Safety Upgrade at Riyadh Refinery and Najran Bulk Plant
20.00 2 years
9 400591/004 SFC - Additional Steam supply – Riyadh Refinery
1.2 90 days
10 6600005107 Maintenance service@ Rastanura & Abqaiq Refinery 9.2 2 years
11 B.I10-03540SFC - Manpower , Equipment and
3.5 1 year
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 7 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
Materials Supply at Riyadh Refinery
12 6600017366 Mercury Removal Project at Rastanura Refinery 5.7 1 year
13 37685-pzv Upgrade Area H,I,J Shutdown - Riyadh Refinery 14.2 45 days
14 400591/16 SFC - Cooling tower Erection – Riyadh Refinery
13.2 1 year
15 44371/00 Jet Fuel modification system - Riyadh Refinery 1.3 1 year
16 JUPC United Petrol Chemical Company - Jubail - Manpower, Equipment, Materials supply 15.5 2 years
17 Bemco- Sub Contract
Two Grades of Gasoline requirements at Seven Bulk Plants-Sub Contract - Bemco
42.2 2 years
18 Saudi Electric Co.
Supply and Install the New Crude oil Pipeline at Tihama Power Plant 2.50 1 year
19 Saudi Electric Co.
Installation of the Additional Pipeline at Asir Power Plant
2.2 1 year
20 44618/00 Replacement of Air Compressors at Riyadh Refinery
4.2 1 year
21 44306/00 Cooling Water system upgrade –Riyadh Refinery
18.5 2 years
Project Completed: Job Title: Sr. Engineer Subcontract & Procurement SL # Contract # Projects Name & Locations USD$
Million Duration
01 6404-SC-029New LNG Train Skikda MEI-1:
MEI 1 INSTALLATION FOR NEW (LNG) TRAIN SKIKDA PROJECT, ALGERIA
OWNER : SONATRACH, ALGERIA COMPANY : KBRII KELLOGG, BROWN & ROOT INTERNATIONAL CONTRACTOR : DODSAL ENGINEERING
400 2 years
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 8 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
AND CONSTRUCTION FZE SCOPE OF WORK: Mechanical, Electrical and Instrumentation installation work for New LNG Train and Fractionation Unit.BREAK UP OF WORKS- DISCIPLINE WISEPiping 69.5%Equipments erection 12.0%Equipment Structures & Grouting 1.4%E&I 17.1% SUMMARY OF MAJOR QUANTITIES: Pipe Spool Erection (22,244Nos.) LM 134,840.00Pipe Support : MT 1,736Equipment Erection, Alignment (14,900Nos.) Equipment Platform Structure & Grouting MT 238UG Cabling works (22Km.)AG Cabling Works (726Km.)Cable Tray installation (96Km.)Fiber Optic Cable (4Km.)Instruments (2,415Nos.)
Project Completed: Job Title: Manager Project Procurement
Sl.# Contract. No. Project Name & Location USD$ Millions Duration
02 0042/2010/NR/ZU ZUBAIR OIL FIELD DEVELOPMENT PROJECT–EPC - PIPE LINES INSTALLATION:Eni0042/2010/NR/ZU
Lump Sum USD: 450 MillionsCall Off Scope USD: 150 Millions Additional Scope USD: 250 Millions
OWNER: SOUTH OIL COMPANY (SOC) IRAQ
COMPANY: ENI IRAQ B.V
CONTRACTOR: (JV) of Sicim SpA –Drake&Scull international (PJSC) UAE
SCOPE OF WORK: Civil, Mechanical Electrical and Instrumentation. EPC of Oil & Water Flow lines, Water Trunk lines and Oil Transfer lines.
Overall (SOW) construction of 52Nos. New Oil wells and 20Nos. water wells.
850 3 Years
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 9 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
Main Scope of Work:1.New Oil flow lines 2.3/1 and Replacement of Existing Oil flow lines 2.3/22.New Oil Transfer Pipe line system3.Installation of New water flow lines and replacement of existing water flow lines4. Oil and Water wellhead Hook-up5. Replacement of Existing River water pipe lines 6. Replacement of existing water injection trunk lines 7. Oil &Water manifold works
General Requirements:1. Utility system2. Mechanical System3. Electrical system and Cathodic
protections system4. Instrument and control system 5. Piping system 6. Civil Structural and Architectural
Systems7. HSC Systems 8. Telecommunication system & IT9. Surveys and mapping 10. Installation of under /Above
ground flow linesBased on preliminary assumptions the diameters and length of oil transfer network system should be as follows Line pipes length &Dia.
1. 18” approximately 4,200KM 2. 24” approximately 17,500KM 3. 36” approximately 15,000KM4. 52” approximately 6,600KM
Project Current: Job Title: Sr. Engineer Procurement & Subcontract
Sl.# Contract. No. Project Name & Location USD$ Millions Duration
ICHTHYS PPROJECT ONESHORE LNG FACILITIES. : BLADIN POINT, DARWIN, NORTHERN TERRITORYProject Value (USD $ 25 Billions)COMPANY: Joint Venture between INPEX group companies (the Operator), major partner TOTAL group companies and the Australian
922 3 Years
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 10 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
subsidiaries of Tokyo Gas, Osaka Gas,
Chubu Electric Power and Toho Gas CONTRACTOR: JKC Australia LNG Pty Ltd (JKC). : Joint venture comprises JGC Corporation, KBR and Chiyoda Corporation Scope of Work: Partial Supply and construction of Onshore LNG Facilities with Engineering, Procurement (EPC) contract. Responsibilities: Lead and manage full Procurement & Subcontract activities of EPC Project. Key interactions (internally, externally) Internally: Project Managers, Engineering, Construction, Legal, Cost Controllers, Finance and Accounting Externally : Clients, Vendors and Consultants MAIN ACCOUNTABILITIES 1.Developes the procurement plan, procedures and documentations in accordance to the Project requirements. 2.Ensuring the project objectives, scope and plan are well defined and understood by the procurement team. 3. Planning, organizing and managing the staffing requirements to execute the project procurement activities 4. Ensuring that the procurement team follows the proper procurement procedures and that the highest ethical standards are in full effect for procurement activities. 5.Determining the best procurement strategies to maximise Project success and mitigate any potential risk 6.Managing the procurement budget and ensuring the targeted objectives are achieved. In this respect, to lead the negotiations on all critical and high value orders with vendors to achieve 7.Managing the procurement progress and efficiency to be in line with Project targets. 8.Ensuring all equipment delivery targets is met and actively resolving
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 11 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
disputes with vendors to achieve win-win situation.
Below are the (EPC) Subcontractors associated with LNG project: 1.John Holland Territorial: – Civil Works 2. Laing O’ Rourke Australia Pty Ltd:-Construction accommodation, complete Village for 3,500 occupant ( EPC)3. Leighton Contractors Pty Ltd:- Design , Engineering , construction , supply, testing and commissioning of various temporary site buildings.4. KentZ:- Telecommunication system for the various temporary facilities EPC subcontract including commissioning5. Bam Clough: (EPC) construction of two separate Vessel Loading out- berths one for LNG carriers & other for LPG/Condensate Carriers.6. Chzm Hill UG (JV):- EPC for power supply and construction of new power plant including commissioning , testing 7. Kawasaki Heavy Industries Ltd.:- EPC contract for construction of Cryogenic tanks. Liquefied Natural Gas (LNG) storage 2Nos. each with networking capacity 165,000 m3, Propane storage tank 1No. capacity 85,000 m3 and Butane storage tank 1No. capacity of 60,000m3.8. AEC Environmental Pty Ltd.:- Subcontract for complete environmental monitoring program with all required provision of Monthly , quarterly and annual reports,9. Ess Larrakia Pty. Ltd:- Village management and accommodation services including security, janitorial ,laundry and housekeeping services.10. Falck Australia:- temporary medical service at both the construction site and accommodations village housing up to 3500 residents.11. Mommoet Australia Pty Ltd.:
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 12 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
Transportation and field erection of equipment and materials.12. CBI Constructions:- EPC contract for the construction of Tanks as below
Tank type Capacity Nos. Service materialsFloating roof 66,359m3 2 Condensate CSFloating roof 4,995m3 1 Condensate CSCone-Roof 24,223m3 1 Fire water CSCone-Roof 24,223m3 1 Service water CSCone-Roof 234m3 1 Drinking water CSCone-Roof 211m3 1 Diesel CSCone-Roof 197m3 1 Irrigation water CSCone-Roof 104m3 1 Fresh water CSCone-Roof 50m3 1 Diesel CSCone-Roof 11m3 2 Acid Gas A516Dome-Roof 2,533m3 2 D Mineral Water CDome-Roof 2,518m3 1 Solvent makeupDome-Roof 2,518m3 1 Wash Water CSDome-Roof 1,846m3 1 Heating M CSSphere 2,527m3 1 Propane A537/A516
REPORTING LINES AND INTERACTIONS:I. Hierarchically reporting
to: Procurement Department Manager
II. Operationally reports to: Project Director/ Manager
III. Directly supervising: Project Procurement and Subcontract Team.
PERSONAL DATAName: MATHEW CHACKO Nationality: IndianJob Title: Procurement Manager Years with Company: 18+ years
EDUCATIONType of Schooling/Training Type of Degree/Certification Graduate College & Year: 1995: (First Class)
Anna Technological University – Raipur - India
B.E.(Mech) Bachelors Degree in Mechanical Engineering
Undergraduate and Graduate College:
Kerala University Trivandrum - India
Pre Degree and Degree in (Mathematics)
Citizenship: INDIA Age: 46 Birth date: 12.04.1968Gender. : MALE Height: 5’.7” Weight: 70Religion, : CHRISTIAN Marital Status: MARRIED Passport No.: F-8485364
ADDITIONAL QUALIFICATIONS: Extensive work experiences in the actual application of Computer Scheduling and Engineering programs like:
Primavera Project Planner Microsoft Projects for Windows Microsoft Excel for Windows Microsoft Word for Windows Microsoft Access for Windows
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 13 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________
Other Windows ApplicationsDeclaration
I hereby declare that the information given here above is true to the best of my knowledge.Signature REFERENCES:
Company Website: www.alhammam.comJoy Anthony (Indian) Dodsal Website: www.dodsal.comSenior Project Manager (PM) www.drakescull.com Al- Hammam Company (P) Ltd. Dammam – Rastanura Saudi Arabia Post Box No. 230
Tel: + 966 03 667 2815 Ext. 208Fax: + 966 03 667 2919Email: [email protected]
Yes, you can contact him:
Bill Henderson (British)Senior Project - Manager Halliburton Energy Services Inc. (HPPS.) Bellaire Boulevard – Houston, Texas 77072-5206 United States of America (USA)
Office: (UK) Tel: + 44 (0)1224757853 Mobile: (UK) + 44 (0) 7715106262Email: [email protected]
Yes, you can contact him:
Ashok Kumar Rathore (Indian)Project Manager Dodsal Engineering and Construction FZE New LNG Project BP, 385, Complex GL 1K Skikda 21000- Algeria Tel: + 213 38745650/52 Ext. 154Fax: + 213 38745651E-mail: [email protected]
Yes, you can contact him:
Ubaldo T. Ciminieri, P.E (USA)KBR- Project Director Sonatrach GNL 2K Project, Algeria New LNG Project BP, 385, Complex GL 1K Skikda 21000- Algeria
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 14 of 15
CURRICULUM VITAEName: C. Mathew India /Australia Tel: +91 475 2207559/+61469298213 Qualification: B. Tech/B.E. (Mechanical) with First Class1995 (From Anna Technological University, Raipur India) UGC, Approved State UniversityPresent Location: Australia: [email protected] : [email protected] ____________________________________________________________ Tel: (+44) 1372 83 1500 Site Off. No.Mobile: + 213 0770539468 Web: www.dodsal.comE-mail: [email protected]
Web: www.alhammam.comYes, you can contact him:
Permanent Address: Unit #36, 159-163, Chapel Road South, Post Code 2200 - Sydney - Australia Page 15 of 15