Materials selection
Transcript of Materials selection
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
The Oil & Gas Engineering Guide
Audiobook
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material selection
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material selection
Selection of steel based on design temperature
CARBON STEEL (note 1)
LOW TEMPERATURE CARBON STEEL (note 2)
3,5 Ni ALLOY STEEL (note 3)
1,25Cr - 0,5Mo ALLOY STEEL
2,25Cr - 1Mo ALLOY STEEL
5Cr - 0,5Mo ALLOY STEEL
9Cr - 1Mo ALLOY STEEL
9Cr - 1Mo - V ALLOY STEEL
13 Cr
AISI 304, 316, 321
AISI 304L, 316L
AISI 304H, 316H, 321H
DUPLEX
1100- 425°F - 20- 40- 100- 150- 325 100
STEEL TEMPERATURE RANGE Based on ASME B31.3 edition 2004
- 50 1000800700650 1500°F13501200
- 254°C
Notes :
1. The lower temperature limit depends on wall thickness for pipe and plate, it is to be checked.
2. The low temperature propertie of this steel is checked by impact test.
3. The procurement of this steel is not easy, austenitic stainless steel should be preferred.
Range of use according to ASME B31.3 Range of use recommended by Technip.
- 198 - 101 - 73 - 46 - 40 - 29 37,8 343 650 732 816°C371 427 538 593
600°F
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material selection
Selection of steel based on design temperature
CARBON STEEL (note 1)
LOW TEMPERATURE CARBON STEEL (note 2)
3,5 Ni ALLOY STEEL (note 3)
1,25Cr - 0,5Mo ALLOY STEEL
2,25Cr - 1Mo ALLOY STEEL
5Cr - 0,5Mo ALLOY STEEL
9Cr - 1Mo ALLOY STEEL
9Cr - 1Mo - V ALLOY STEEL
13 Cr
AISI 304, 316, 321
AISI 304L, 316L
AISI 304H, 316H, 321H
DUPLEX
1100- 425°F - 20- 40- 100- 150- 325 100
STEEL TEMPERATURE RANGE Based on ASME B31.3 edition 2004
- 50 1000800700650 1500°F13501200
- 254°C
Notes :
1. The lower temperature limit depends on wall thickness for pipe and plate, it is to be checked.
2. The low temperature propertie of this steel is checked by impact test.
3. The procurement of this steel is not easy, austenitic stainless steel should be preferred.
Range of use according to ASME B31.3 Range of use recommended by Technip.
- 198 - 101 - 73 - 46 - 40 - 29 37,8 343 650 732 816°C371 427 538 593
600°F
CS SS 9 Ni 3.5 Ni LTCS Cr-Mo SS
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material selection
Corrosion in Upstream facilities
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material selection
Corrosion in Upstream facilities
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material selection
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material selection
Material Selection Diagram
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material Selection & Corrosion control Report
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Material Selection and corrosion control specification
(equipment)
© 2
01
5 – H
ervé
Baro
n
HERVE
BARON
Painting systems definition and specification