Construction of material facilitators of

action.Stick and sonorous ball incorporated in a

walker

Bas Cerdá, AlejandroBarberá Pérez, Eneas

Cots Olcina, IreneLópez Belmonte, Cristina

2014/2015

This one is the image of the walker used to adapt the stick and the ball.

1. Walking Bronco type

Figue1. Walking Rough type that uses Frames and signposting of the material facilitator of the action.

Tied ball

Paper and pencil Meter Two pipes of cork of swimming pool Wood Cútex Sanding Glue Rope Ball of cork, foam or similar Two bells

2. Necessary material

Stick

3. Construction Process

Figure 2. Sketch of the material facilitator of the action

Finally , the attachment of the walker stick was made by straps.

Figure 3. Taking measurements

Figure 4. Testing of the material to build the stick. Figure 5. Drawing the bow on wood.

Figure 6. Attaching the two pipes of cork of swimming pool and side cutting .

Figure 7. Attaching the pipes cork wood.

At this stage, we have joined the grip with the front of the stick.

Once done, just missing attach the stick to the walker. That will do through straps.

Figure 8. Final sanding to round the corners .

Sound ball

Figure 9. Division of the sphere into two halves.

Once divided the sphere, we

introduce two bells and the end

of a rope.

Then return it to attach with glue and decorate to

your liking.

This is how our work was:

4. Final Project