MATEC 30 HVS - maschinen-kistner.deMATEC 30 HVS | Transport load axis horizontal Transport load axis...
Transcript of MATEC 30 HVS - maschinen-kistner.deMATEC 30 HVS | Transport load axis horizontal Transport load axis...
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
MATEC 30 HVS
2
MACHINE INFO
Manufacturer
Type
Year of manufacture
Control
Machine number
Travels
| 2 MATEC 30 HVS |
TECHNICAL DATA and EQUIPMENT
| 3 MATEC 30 HVS |
Rapids in X/Y/Z 1-axis NC swivel head, swiveling
Direct measuring system
Either continuously or adjustable with clamp
Max. tangent torque Motor spindle
Motor spindle with
Torque
Tool places Machine spindle
Tool holder HSK 63 Form A accord. to DIN 69893 1 NC rotary table with direct drive
Design for turning and positioning
Holding plate Ø 630 mm with T grooves installation position – Holding plate horizontal Center alignment Ø 60 mm
Speed max. 80 1/min
Power: 40% DC 5 kW, 100% DC 2,5 kW
Torque: 40% DC 600 Nm, 100% DC 270 Nm,
Transport load (depending on the speed) max. 1150 kg, incl. direct measuring system and axis controller
Fixed rotary table (RT1) Outlet 117 mm usable 1 NC rotary table RW/NC-160/250
Holding plate vertical/horizontal
Holding plate diameter
Height of centers - standard
| 4 MATEC 30 HVS |
Transport load axis horizontal
Transport load axis horizontal with tailstock
Max. tangent torque at 100 bar
incl. motor (AC) with built-in rotary measuring system and hydraulic clamping and incl. additional CNC-axis
Performance vertically with torque technology 1 saw unit
Construction on the X axis of the machine. The saw unit is coupled with the X axis carriage. Feed axis CNC controlled
Saw blade diameter
Saw blade holder
Quick change system, cooling with emulsion 1 Bar feeders for profiles and round materials consisting of:
- Load magazine for 5 bars Bars lenght max. 3000 mm Bars size diameter 120 mm and any rectangular dimensions that fit in an envelope circle 120 mm, but the smallest measure: 10 x 60 mm
- Automatic alignment station for centering the parts (fast electronic upgrade path)
- Bar feed unit
- Incl. profibus interface for communication with the machine
2-jaw power chuck operated hydraulically, adjustable clamping pressure via proportional valve Version without baking
1 set chuck jaw 1 internal coolant supply (paper band filter)
Equipment of the machine for use of tools (DIN 69871) with internal coolant supply through the spindle and the tool.
Paper band filter device – fineness
Second coolant supply – High pressure pump
Tank capacity paper filter unit
| 5 MATEC 30 HVS |
1 Coolant high pressure at the outer nozzles Coolant high pressure pump can be switched via M function in the part program on the outer nozzles on the headstock. 1 Compressed air to the outer nozzles. Controllable via M-function in the part program. 1 internal pressure air trough the tool 1 BLUM-Laser tool breakage detection 1 3D probe with radio signal transmission with radio control, incl. control software 1 Oil mist extraction system for filtering and extraction of oil / emulsion mist with a flashpoint of not less than 120°C
Mechanical air filter MAXI 2500, horizontal with motor and blower and separated set up console
Air power Total power Operating voltage 2 additional rinsing device for device cleaning, switchable from emulsion to air
for RT1 and RT2 for cleaning the chuck RT1 and the chuck RT2 1 electronic handwheel 1 Special spindle housing for accommodating the torque table with separate storage for second chuck Execution in the horizontal axis of rotation
2 intermediate flange D320, pitch circle D280, 6 x threads M12 for RT1
2 Electro safety control block Type ESIS 24, suitable for Schunk pneumatic chucks from size 250 consisting of:
Pressure control valve, pressure switches and solenoid valves 2 with automatic clamping time monitoring, incl. 2 sensors and 2 evaluation devices.
Pressure monitoring is fully up to network pressure in the chuck. The unit is linked with the machine control. Execution for 24 V for RT1
| 6 MATEC 30 HVS |
3 Special collets with inner profile for chuck
Rotating opening
3 Special collets with inner profile for rear-end collet chuck
Insertion on collet front for RT1
Version for workpiece dimensions
- 105 x 45 - 63,5 x 26 - 76 x 35
Longest part 190 mm with 6 kg 1 Changing device pneumatically for collets two-hand operation 3 reduction tube Operation over 2-hand operation for RT1 for the two chucks
2 Spring operated collet chuck with diameter 420 mm - Bore diameter 117 mm - Clamping via spring - Opening via pneumatic piston - without collet 1 Slide with automatic door for the transportation of the workpiece from the machine. Cross transport by conveyor belt including trigger in the tool magazine 1 second chute for removing the unusable rod leftovers. 1 Special panel with pneumatic safety doors emulsion recycling before and after handling parts Protective housing of the machine with sheet metal walls 2 Automatic handling tool with HSK 63
Compensation in 4 axes, for workpieces up to 100 mm.
Access by means of pressure through the spindle.
| 7 MATEC 30 HVS |
3 set of gripper jaws (2 pieces) for universal use
1 Tool monitoring Toolinspect Ti-DP1
Display on control screen monitoring tools to break from 5 mm diameter incl. software upgrade tool wear Workroom full cover with roof Bellows with steel fins Direct measuring system X-, Y-, Z axis Chip conveyor Rinsing gun Oil central lubrication Work area lighting 2-compartments Installation elements User guide / Documentation Machine parameters on CD
MACHINE PICTURES
| 8 MATEC 30 HVS |
| 9 MATEC 30 HVS |
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*