MASTERCASE 5 MAKER UPGRADE KIT - Cooler … 5 MAKER UPGRADE KIT ... Slide it in and assist the...
30
Upgrade tutorial MASTERCASE 5 MAKER UPGRADE KIT Pim van der Linde
Transcript of MASTERCASE 5 MAKER UPGRADE KIT - Cooler … 5 MAKER UPGRADE KIT ... Slide it in and assist the...
Upgrade tutorial
MASTERCASE 5 MAKER
UPGRADE KIT
Pim van der Linde
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.2
Order your upgrade kit
Click me!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.3
Package arrived!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.4
MasterCase Maker 5 upgrade kit!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.5
Grab your MasterCase 5 / Pro
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.6
Remove both side panels
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.7
Tip: Make sure your pet has a good time!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.8
Remove the front panel
Gently push the front panel clips,no tools are needed.
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.9
Easy as that!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.10
Remove the 2 screws under the I/O panel
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.11
Make sure that all cables are disconnected.
Slides out.
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.12
Clearance for the cables
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.13
Comparison I/O panels
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.14
Slide it in and assist the cables
Do not force is, it should slide in easily.
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.15
Place the front mesh panel
No tools needed!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.16
Now place the front door
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.17
Get ready for the fan hub pcb
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.18
Install it behind the motherboard tray
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.19
2 screws are required
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.20
Place the cover
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.21
Attach the cables
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.22
Make sure to connect the Molex connector
Powers the front I/O!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.23
Done. Enjoy your MasterCase Maker 5!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.24
Enjoy your MasterCase Maker 5!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.25
Enjoy your MasterCase Maker 5!
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.26
Something is missing…
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.27
MasterCase 5 tempered glass side panel
Peek-a-boo
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.28
You’re all set for a new adventure
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.29
Even during night time
Copyright 2015 © Cooler Master Corporation. All Rights Reserved.30
Thanks!
