Doc. No :

Rev No :

Page : 3 of 11

Consultant/

Vendor No:

REVISION CHANGE NOTICES

Revision

A1

A2

B1

B2

B3

B4

B5

C1

C2

HOLDS TABLE

Location

-

Revised as marked Update as latest

Revised as marked EnQuest comments incorporeted & other changes

21020-BAE-70000-ME-LS-0001

C2

Location of Changes Brief Description of Change

New Document

Revised as marked Update as latest

Revised as marked Update as latest

Hold Action By

Revised as marked Update as per latest supplier data

Revised as marked Update as per latest supplier data

Revised as marked Update as per latest supplier data

Revised as marked Update as per latest supplier data

Refer "General Hold" note - -

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

C2 25­VP­1130 25 Test Separator21020-BAE-71100-PR-

DW-7104Horizontal Pressure Vessel PD 5500 Duplex SS 1 x 100% 10.7 45 14/ FV -8/ 80 - - - 8 2.6 - 16 50 66

TRAIN A

C2 30­VS­1110 30A FW KO Drum21020-BAE-71100-PR-

DW-7102Horizontal Pressure Vessel PD 5500 Duplex SS 1 x 50% 9.5 45-48 14/ FV -8/ 80 - - - 14 4.5 - 64 275 325

30-HP-1110 30A Oil / Oil Exchanger21020-BAE-71100-PR-

DW-7105- Plate and Frame ASME VIII Div 1/ API 662

Titanium Gr 1 (Plate),

Carbon Steel (Frame)1 x 50%

Hot: 6.5;

Cold: 7

Hot (In/Out): 140/

90;

Cold (In/Out): 45/

68

14/ FV -8/ 165 7.3 MW - - 2.3 1.1 2.0 4.5 5.1 5.1 - Heat Recovery Exchanger

30­HP­1111 30A Oil / PW Exchanger21020-BAE-71100-PR-

DW-7105- Plate and Frame ASME VIII Div 1/ API 662

Titanium Gr 1 (Plate),

Carbon Steel (Frame)1 x 50%

Hot: 10.5;

Cold: 5.5

Hot (In/Out): 140/

80;

Cold (In/Out): 68/

113

18/ FV -8/ 165 15.7 MW - - 2.6 1.1 2.0 5.9 6.6 6.6- Heat Recovery Exchanger

30-HE-1112 30A Oil Heater21020-BAE-71100-PR-

DW-7107Horizontal Shell and Tube

ASME SEC.VIII, DIV. 1/

TEMA R/ API 660

LTCS + 3mm CA (ShellSide)

DSS (TubeSide)1 x 50%

Shell: 5.2;

Tube: 4.5

Shell (In/Out):

160/160;

Tube (In/Out): 52-

102.8/ 140

14/ FV -8/ 190 19 MW - - 9.4 1.1 - 24.0 32.0 33.0- TEMA Type AEN

TRAIN B

C2 30­VS­1120 30B FW KO Drum21020-BAE-71100-PR-

DW-7103Horizontal Pressure Vessel PD 5500 Duplex SS 1 x 50% 9.5 45-48 14/ FV -8/ 80 - - - 14 4.5 - 64 275 325

30-HP-1120 30B Oil / Oil Exchanger21020-BAE-71100-PR-

DW-7106- Plate and Frame ASME VIII Div 1/ API 662

Titanium Gr 1 (Plate),

Carbon Steel (Frame)1 x 50%

Hot: 6.5;

Cold: 7

Hot (In/Out): 140/

90;

Cold (In/Out): 45/

68

14/ FV -8/ 165 7.3 MW - - 2.3 1.1 2.0 4.5 5.1 5.1- Heat Recovery Exchanger

30­HP­1121 30B Oil / PW Exchanger21020-BAE-71100-PR-

DW-7106- Plate and Frame ASME VIII Div 1/ API 662

Titanium Gr 1 (Plate),

Carbon Steel (Frame)1 x 50%

Hot: 10.5;

Cold: 5.5

Hot (In/Out): 140/

80;

Cold (In/Out): 68/

108

18/ FV -8/ 165 15.7 MW - - 2.6 1.1 2.0 5.9 6.6 6.6- Heat Recovery Exchanger

30-HE-1122 30B Oil Heater21020-BAE-71100-PR-

DW-7108Horizontal Shell and Tube

ASME SEC.VIII, DIV. 1/

TEMA R/ API 660

LTCS + 3mm CA (ShellSide)

DSS (TubeSide)1 x 50%

Shell: 5.2;

Tube: 4.5

Shell (In/Out):

160/160;

Tube (In/Out): 52-

102.8/ 140

14/ FV -8/ 190 19 MW - - 9.4 1.1 - 24.0 32.0 33.0- TEMA Type AEN

XX-PC-1131 Water Recycle Pump (Future) - - - - - - - - - - - - - - - - - - -

XX-VM-1131 Dessander Vessel (Future) - - - - - - - - - - - - - - - - - - -

XX-VM-1132 Sand Collection Vessel (Future) - - - - - - - - - - - - - - - - - - -

CRUDE OIL TREATMENT INCL DEHYDRATION, STABILIZATION AND CONDENSATE SPLITTER

TRAIN A

C2 30-VS-1210 30A LP Separator21020-BAE-71200-PR-

DW-7109Horizontal Pressure Vessel PD 5500 Super Duplex SS 1 x 50 % 3.4 140 14/ FV -8/165 - - 8.2 3.2 ­ 26 76 105

30-VE-1211 30A Electrostatic Coalescer21020-BAE-71200-PR-

DW-7113Horizontal Pressure Vessel ASME VIII Div 1 LTCS + 825 Cladding 1 x 50 % 6.5 140 14/ FV -8/165 322 m3/hr 275 15.6 4.0 ­ 93 305 310 2 x100% power unit, each rated for 275 kW

C2 30­PC­1210A 30A LP Separator PW Pump A21020-BAE-71200-PR-

DW-7111Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 x 100 % 13.3 140 18 -8/165 232 m3/h 82.5 110.0 2.9 1.6 2.3 3.27 3.31 3.6

C2 30­PC­1210B 30A LP Separator PW Pump B21020-BAE-71200-PR-

DW-7111Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 x 100 % 13.3 140 18 -8/165 232 m3/h 82.5 110.0 2.9 1.6 2.3 3.27 3.31 3.6

C2 30­PC­1212A 30A Oil Transfer Pump A21020-BAE-71200-PR-

DW-7115Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 100 % 8.2 140 14 -8/165 325 m3/h 54.6 110.0 2.9 1.7 2.3 3.6 3.7 4.0

C2 30­PC­1212B 30A Oil Transfer Pump B21020-BAE-71200-PR-

DW-7115Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 100 % 8.2 140 14 -8/165 325 m3/h 54.6 110.0 2.9 1.7 2.3 3.6 3.7 4.0

TRAIN B

C2 30-VS-1220 30B LP Separator21020-BAE-71200-PR-

DW-7110Horizontal Pressure Vessel PD 5500 Super Duplex SS 1 x 50 % 3.4 140 14/ FV -8/165 - - 8.2 3.2 ­ 26 76 105

C2 30-VE-1221 30B Electrostatic Coalescer21020-BAE-71200-PR-

DW-7114Horizontal Pressure Vessel ASME VIII Div 1 LTCS + 825 Cladding 1 x 50 % 6.5 140 14/ FV -8/165 322 m3/hr 275 15.6 4.0 ­ 93 305 310 2 x100% power unit, each rated for 275 kW

C2 30­PC­1220A 30B LP Separator PW Pump A21020-BAE-71200-PR-

DW-7112Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 x 100 % 13.3 140 18 -8/165 232 m3/h 82.5 110.0 2.9 1.6 2.3 3.27 3.31 3.6

C2 30­PC­1220B 30B LP Separator PW Pump B21020-BAE-71200-PR-

DW-7112Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 x 100 % 13.3 140 18 -8/165 232 m3/h 82.5 110.0 2.9 1.6 2.3 3.27 3.31 3.6

C2 30­PC­1222A 30B Oil Transfer Pump A21020-BAE-71200-PR-

DW-7116Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 100 % 8.2 140 14 -8/165 325 m3/h 54.6 110.0 2.9 1.7 2.3 3.6 3.7 4.0

C2 30­PC­1222B 30B Oil Transfer Pump B21020-BAE-71200-PR-

DW-7116Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 100 % 8.2 140 14 -8/165 325 m3/h 54.6 110.0 2.9 1.7 2.3 3.6 3.7 4.0

25-HE-1230 25 LP Gas Cooler21020-BAE-71200-PR-

DW-7133Horizontal Shell and Tube

ASME SEC.VIII, DIV. 1/

TEMA R/ API 660

25% Cr SDSS (Shell),

25% Cr SDSS (Tube)1 x 100 %

Shell: 7.8-8.5;

Tube: 3.4

Shell (In/ Out):

16.6/45;

Tube (In/Out):

140/30

Shell: FV/18;

Tube: FV/ 14-8/165 9.12 MW ­ - 5.5 0.75 - 5.5 8.0 8.0 - TEMA Type BFU

C2 25­PC­1230A 25 LP Gas KO Drum Pumps A21020-BAE-71200-PR-

DW-7134Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 x 100 %

Suction: 3

Discharge: 7.430 14 -8/150 12.5 m3/h 5.6 7.5 1.7 1.28 2.2 1.16 1.19 1.51

C2 25­PC­1230B 25 LP Gas KO Drum Pumps B21020-BAE-71200-PR-

DW-7134Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 x 100 %

Suction: 3

Discharge: 7.430 14 -8/150 12.5 m3/h 5.6 7.5 1.7 1.28 2.2 1.16 1.19 1.51

25-VG-1230 25 LP Gas KO Drum21020-BAE-71200-PR-

DW-7134Vertical Pressure Vessel ASME VIII Div 1 SS316L 1 x 100 % 3 30 14 / FV -8/150 - - 1.2 3.23 5.0 7.0 10.5

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

CRUDE HEATING AND SEPARATION

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

CRUDE PUMPING TO STORAGE, METERING AND SAMPLING

30­HP­1213 30A Oil Cooler (Train A)21020-BAE-71200-PR-

DW-7117- Plate and Frame ASME VIII Div 1/ API 662

Titanium Gr 1 (Plates),

Carbon Steel (Frame)1 x 50 %

Hot: 5.5;

Cold: 11.5

Hot (In/Out): 140/

50;

Cold (In/Out): 18/

49

FV/ 18.5 -8/150 5.2MW - - 3.40 1.10 2.63 8.8 10.1 10.10

30­HP­1223 30B Oil Cooler (Train B)21020-BAE-71200-PR-

DW-7117- Plate and Frame ASME VIII Div 1/ API 662

Titanium Gr 1 (Plates),

Carbon Steel (Frame)1 x 50 %

Hot: 5.5;

Cold: 11.5

Hot (In/Out): 140/

50;

Cold (In/Out): 18/

49

FV/ 18.5 -8/150 5.2MW - - 3.40 1.10 2.63 8.8 10.1 10.10

TRAIN A

30-AY-1610 PW Treatment Package - - Skid Package - - - - - - - - - - 14.0 8.5 8.0 160.0 285.0 - Weight excluded PW Pump Skid

30-VJ-1610A 30A - PW Hydrocyclone (FW KO PW)21020-BAE-71600-PR-

DW-7121Horizontal Hydrocyclone - LTCS + 3mm SS316L overlay 1 x 25 % - - 14 -8/80 - - - - - - - - -

30-VJ-1610B 30A - PW Hydrocyclone (FW KO PW)21020-BAE-71600-PR-

DW-7121Horizontal Hydrocyclone - LTCS + 3mm SS316L overlay 1 x 25 % - - 14 -8/80 - - - - - - - - -

30-VJ-1613 30A - PW Hydrocyclone (LP/EC PW)21020-BAE-71600-PR-

DW-7121Horizontal Hydrocyclone - LTCS + 3mm SS316L overlay 1 x 100 % - - 18 -8/150 - - - - - - - - -

30­VV-1611A 30A - Compact Flotation Unit (Stage 1)21020-BAE-71600-PR-

DW-7121Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30­VV-1611B 30A - Compact Flotation Unit (Stage 1)21020-BAE-71600-PR-

DW-7121Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30­VV-1612A 30A - Compact Flotation Unit (Stage 2)21020-BAE-71600-PR-

DW-7121Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30­VV-1612B 30A - Compact Flotation Unit (Stage 2)21020-BAE-71600-PR-

DW-7121Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30-VG-1615 30A - PW Degasser21020-BAE-71600-PR-

DW-7121Vertical Pressure Vessel ASME VIII Div 1/ PD 5500 SS316L 1 x 50% - - - - - - - - - - - - -

30A PW Pump Skid Skid Package 8 3.5 4 27 30

30-PC-1612A 30A Floatation Recycle Pump A21020-BAE-71600-PR-

DW-7122Horizontal - - SS316L 1 X 50% - - - - - - - - - - - - -

30-PC-1612B 30A Floatation Recycle Pump B21020-BAE-71600-PR-

DW-7123Horizontal - - SS316L 1 X 50% - - - - - - - - - - - - -

30-PC-1612C 30A Floatation Recycle Pump C21020-BAE-71600-PR-

DW-7124Horizontal - - SS316L 1 X 50% - - - - - - - - - - - - -

30-PC-1611A 30A PW Degasser Oil Pump A21020-BAE-71600-PR-

DW-7121Horizontal Centrifugal Pump -

SS316,

Carbon Steel - API 610 S-81 X 100%

Suction: 0.2;

Discharge: 645/52 14 -8/ 80 STA 5 - - - - - - -

30-PC-1611B 30A PW Degasser Oil Pump B21020-BAE-71600-PR-

DW-7121Horizontal Centrifugal Pump -

SS316,

Carbon Steel - API 610 S-81 X 100%

Suction: 0.2;

Discharge: 645/52 14 -8/ 80 STA 5 - - - - - - -

C2 35-PC-1610A 35 PW Transfer Pump A21020-BAE-71600-PR-

DW-7123Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 X 50%

Suction: 1.2;

Discharge: 15.348/57 28 -8/ 80 762 m3/h 411 500 3.8 2.06 2.5 7.6 7.7 8.4

C2 35-PC-1610B 35 PW Transfer Pump B21020-BAE-71600-PR-

DW-7123Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 X 50%

Suction: 1.2;

Discharge: 15.348/57 28 -8/ 80 762 m3/h 411 500 3.8 2.06 2.5 7.6 7.7 8.4

C2 35-PC-1610C 35 PW Transfer Pump C21020-BAE-71600-PR-

DW-7124Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 X 50%

Suction: 1.5;

Discharge: 15.348/57 28 -8/ 80 762 m3/h 411 500 3.8 2.06 2.5 7.6 7.7 8.4 - Common Spare for Produced Water Transfert Pump (train A & train B)

TRAIN B

30-AY-1620 PW Treatment Package - - Skid Package - - - - - - - - - - 14.0 8.5 8.0 160.0 285.0 - - Weight excluded PW Pump Skid

30-VJ-1620A 30B - PW Hydrocyclone (FW KO PW)21020-BAE-71600-PR-

DW-7122Horizontal Hydrocyclone - LTCS + 3mm SS316L overlay 1 x 25 % - - 14 -8/80 - - - - - - - - -

30-VJ-1620B 30B - PW Hydrocyclone (FW KO PW)21020-BAE-71600-PR-

DW-7122Horizontal Hydrocyclone - LTCS + 3mm SS316L overlay 1 x 25 % - - 14 -8/80 - - - - - - - - -

30-VJ-1623 30B - PW Hydrocyclone (LP/EC PW)21020-BAE-71600-PR-

DW-7122Horizontal Hydrocyclone - LTCS + 3mm SS316L overlay 1 x 100 % - - 18 -8/150 - - - - - - - - -

30­VV-1621A 30B - Compact Floatation Unit (Stage 1)21020-BAE-71600-PR-

DW-7122Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30­VV-1621B 30B - Compact Floatation Unit (Stage 1)21020-BAE-71600-PR-

DW-7122Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30­VV-1622A 30B - Compact Floatation Unit (Stage 2)21020-BAE-71600-PR-

DW-7122Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30­VV-1622B 30B - Compact Floatation Unit (Stage 2)21020-BAE-71600-PR-

DW-7122Vertical - - SS316L 1 x 25 % - - - - - - - - - - - - -

30-VG-1625 30B - PW Degasser21020-BAE-71600-PR-

DW-7122Vertical Pressure Vessel ASME VIII Div 1/ PD 5500 SS316L 1 x 50% - - - - - - - - - - - - -

30A PW Pump Skid Skid Package 8 3.5 4 27 30 -

30-PC-1622A 30A Floatation Recycle Pump A21020-BAE-71600-PR-

DW-7122Horizontal - - SS316L 1 X 50%

30-PC-1622B 30A Floatation Recycle Pump B21020-BAE-71600-PR-

DW-7123Horizontal - - SS316L 1 X 50%

OILY WATER / PRODUCED WATER SYSTEM

- Part of Produced Water Treatment Package Supply

- Loacated on 30-AY-1610 skid

- Part of Produced Water Treatment Package Supply

- Loacated on PW Pump Skid

- Part of Produced Water Treatment Package Supply

- Loacated on 30-AY-1620 skid

- Part of Produced Water Treatment Package Supply

- Loacated on PW Pump Skid

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

30-PC-1622C 30A Floatation Recycle Pump C21020-BAE-71600-PR-

DW-7124Horizontal - - SS316L 1 X 50%

30-PC-1621A 30B PW Degasser Oil Pump A21020-BAE-71600-PR-

DW-7122Horizontal Centrifugal Pump -

SS316,

Carbon Steel - API 610 S-81 X 100%

Suction: 0.2;

Discharge: 645/52 14 -8/ 80 25 m3/h 5 - - - - - - -

30-PC-1621B 30B PW Degasser Oil Pump B21020-BAE-71600-PR-

DW-7122Horizontal Centrifugal Pump -

SS316,

Carbon Steel - API 610 S-81 X 100%

Suction: 0.2;

Discharge: 645/52 14 -8/ 80 25 m3/h 5 - - - - - - -

C2 35-PC-1620A 35 PW Transfer Pump A21020-BAE-71600-PR-

DW-7130Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 X 50%

Suction: 1.2;

Discharge: 15.348/57 28 -8/ 80 762 m3/h 411 500 3.8 2.06 2.5 7.6 7.7 8.4

C2 35-PC-1620B 35 PW Transfer Pump B21020-BAE-71600-PR-

DW-7130Horizontal Centrifugal Pump API 610 Duplex - API 610 D-1 1 X 50%

Suction: 1.2;

Discharge: 15.348/57 28 -8/ 80 762 m3/h 411 500 3.8 2.06 2.5 7.6 7.7 8.4

C2 20-AY-6330 Main deck Sand Cleaning Package21020-BAE-76300-PR-

DW-7131- Skid Package - Duplex SS - 5 45/54 28 -8/ 80 70 m3/hr - - 5 4 5 9.5 12.5 -

- Part of Produced Water Treatment Package Supply

C2 35­AY­6310 35 PW WI/HSP Fine Filtration Package21020-BAE-76300-PR-

DW-7125- Skid Package - Duplex SS 1 x 100% 15 48/54 28 -8/ 80 ­ ­ -

HSP Power Water Fine Filtration

Package

20­AY­1811 20 Flare Ignition Package21020-BAE-71800-PR-

DW-7159- Skid Package - Duplex + SS316L 1 x 100% 1.4 -5/28 10 0 - ­ -

20 Propane Bottle21020-BAE-71800-PR-

DW-7159Located on 20-AY-1811 skid

20­AY­1810 20 Flare Tip21020-BAE-71800-PR-

DW-7159- Flare Tip - Alloy 800H 1 x 100% 0.1-3 -5/28 10 ­45 / 200-600 60 MMscfd - - 3.0 1.176 - 0.75 - -

20­PP­1810A 20 Flare KOD Pump A (Progressive) 21020-BAE-71800-PR-

DW-7158Horizontal Progressive Cavity Pump API 676 Super Duplex SS 1 x 100% 0.1 - 11.5 45/140 14 -8 / 165 10 m3/h 4.69 12.5 3.1 0.9 2.6 0.85 0.87 0.94

20­PP­1810B 20 Flare KOD Pump B (Progressive)21020-BAE-71800-PR-

DW-7158Horizontal Progressive Cavity Pump API 676 Super Duplex SS 1 x 100% 0.1 - 11.5 45/140 14 -8 / 165 10 m3/h 4.69 12.5 3.1 0.9 2.6 0.85 0.87 0.94

20­VA­1810 20 Flare Knock Out Drum21020-BAE-71800-PR-

DW-7157Horizontal Pressure Vessel ASME VIII Div 1 Super Duplex SS 1 x 100% 1 - 1.7 45 / 140 FV/10 -45 / 165 - - - 4 1.600 - 6.6 10.0 16.0

- Boot Size : 0.85m ID x 2.m T/T

20-HS-1810A 20 Flare Drum Heater A21020-BAE-71800-PR-

DW-7157- Electric Heater - Incolloy 800 - - - - - 20 kW - - - 1.5 1.5 1.500 - Located on 20­VA­1810 vessel

20-HS-1810B 20 Flare Drum Heater B21020-BAE-71800-PR-

DW-7157- Electric Heater - Incolloy 800 - - - - - 20 kW - - - 1.5 1.5 1.500 - Located on 20­VA­1810 vessel

75­AY­2800 75 Fiscal Metering Package21020-BAE-72800-PR-

DW-7119- Skid Package - Carbon Steel 1 x 100% 5 50 14 -8/70 4500 m3/h - - 17 7.2 6.0 100 120 -

35­AY­5630A 35 Air Compressor Package A21020-BAE-75600-PR-

DW-7195Horizontal Skid Package - CS 1 x 50% Discharge : 9 Discharge: 35 14 -8/50 1251 Sm3/h 160.7 185 2.9 1.8 2.7 5.5 6.1 6.6

35­AY­5630B 35 Air Compressor Package B21020-BAE-75600-PR-

DW-7195Horizontal Skid Package - CS 1 x 50% Discharge : 9 Discharge: 35 14 -8/50 1251 Sm3/h 160.7 185 2.9 1.8 2.7 5.5 6.1 6.6

35­AY­5630C 35 Air Compressor Package C21020-BAE-75600-PR-

DW-7195Horizontal Skid Package - CS 1 x 50% Discharge : 9 Discharge: 35 14 -8/50 1251 Sm3/h 160.7 185 2.9 1.8 2.7 5.5 6.1 6.6

C2 35­AY­5631A 35 Instrument Air Dryer Package A21020-BAE-75600-PR-

DW-7196Horizontal Skid Package - SS 316 1 x 100% 9 35 14 -8/50 2205 Sm3/h N/A N/A

C2 35­AY­5631B 35 Instrument Air Dryer Package B21020-BAE-75600-PR-

DW-7196Horizontal Skid Package - SS 316 1 x 100% 9 35 14 -8560 2205 Sm3/h N/A N/A

35­VA­5630 35 Instrument Air Receiver21020-BAE-75600-PR-

DW-7179Vertical Pressure Vessel ASME VIII Div 1 LTCS + 3mm CA 1 x 100% 9 35 14/ FV -8/50 - - - - 2.80 5.00 13 17 50

Steam Boiler Packages Module 31.5 18.46 38.90 1356 1541 1593

65-AY-5720A 65 Steam Boiler Package A21020-BAE-76600-PR-

DW-7206- Skid Package PED Cat IV, Module G Refer to PMA 1 x 50% 16 204 18 210 80 t/hr - - - - - - -

65-KF-5761A 65 - Steam Boiler FD Fan A21020-BAE-76600-PR-

DW-7206- - -

SS316 (Impeller)

CS (Casing)1 x 100% 61 mbar 28 - - 76138 m3/hr 200 - - - - - -

65-AY-5720B 65 Steam Boiler Package B21020-BAE-76600-PR-

DW-7207- Skid Package PED Cat IV, Module G Refer to PMA 1 x 50% 16 204 18 210 80 t/hr - - - - - - -

65-KF-5761B 65 - Steam Boiler FD Fan B21020-BAE-76600-PR-

DW-7207- - -

SS316 (Impeller)

CS (Casing)1 x 100% 61 mbar 28 - - 76138 m3/hr 200 - - - - - -

65-AY-5720C 65 Steam Boiler Package C21020-BAE-76600-PR-

DW-7208- Skid Package PED Cat IV, Module G Refer to PMA 1 x 50% 16 204 18 210 80 t/hr - - - - - - -

65-KF-5761C 65 - Steam Boiler FD Fan C21020-BAE-76600-PR-

DW-7208- - -

SS316 (Impeller)

CS (Casing)1 x 100% 61 mbar 28 - - 76138 m3/hr 200 - - - - - -

65-VH-5731 65 Steam Condensate Flash Drum21020-BAE-76600-PR-

DW-7206- Pressure Vessel ASME VIII Div 1/ PD 5500 LTCS + 3mm CA 1 x 100% 1.5 128°C 7 barg -8 / 171 - - - - - - - -

65-VH-5732 65 Condensate Collection Tank21020-BAE-76600-PR-

DW-7206- Pressure Vessel ASME VIII Div 1/ PD 5500 LTCS + 3mm CA 1 x 100% 0.3 107 3.5 / FV -8 / 148 113 kg/hr - - - - - - -

65-PC-5732A 65 Condensate Transfer Pump A21020-BAE-76600-PR-

DW-7206- Centrifugal Pump -

SS316 (Impeller)

CS (Casing)1 x 100% - - - - - - 25 - - - - - -

65-PC-5732B 65 Condensate Transfer Pump B21020-BAE-76600-PR-

DW-7206- Centrifugal Pump -

SS316 (Impeller)

CS (Casing)1 x 100% - - - - - - 25 - - - - - -

65-PC-5730A 65 HP Boiler Feed Water Pump A21020-BAE-76600-PR-

DW-7206- Centrifugal Pump -

SS316 (Impeller)

CS (Casing)1 x 50% - - - - - - 105 - - - - - -

65-PC-5730B 65 HP Boiler Feed Water Pump B21020-BAE-76600-PR-

DW-7206- Centrifugal Pump -

SS316 (Impeller)

CS (Casing)1 x 50% - - - - - - 105 - - - - - -

CRUDE METERING (CUSTODY TRANSFER)

STEAM BOILERS (STEAM GENERATION SYSTEM)

AIR SYSTEM

- Part of Produced Water Treatment Package Supply

PW WI/HSP Fine Filtration Package combined in single skid-7755

Flare Tip & Flare Ignition Package

LP FLARE AND VENT SYSTEM

2.25 1.373.35 1.20

12.5 4.0 6.1

- Part of Produced Water Treatment Package Supply

- Loacated on PW Pump Skid

1.78 -

7.2 7.34.0 3.4 2.5 6.7 - Located on common skid for 35-AY-5631 A/B

- Combined for Dryer A & Dryer B

- Steam Boiler System will be in one module.

- Refer to module drawing 21020-HAM-76600-ME-DW-0001.

- Particle Material Appraisal (PMA) - 21020-HAM-76600-QA-GN-0004.

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

65-PC-5730C 65 HP Boiler Feed Water Pump C - Centrifugal Pump -SS316 (Impeller)

CS (Casing)1 x 50% - - - - - - 105 - - - - - -

65-PC-5731A 65 LP Boiler Feed Water Pump A21020-BAE-76600-PR-

DW-7206- Centrifugal Pump -

SS316 (Impeller)

CS (Casing)1 x 100% - - - - - - 21 - - - - - -

65-PC-5731B 65 LP Boiler Feed Water Pump B21020-BAE-76600-PR-

DW-7206- Centrifugal Pump -

SS316 (Impeller)

CS (Casing)1 x 100% - - - - - - 21 - - - - - -

65-VH-5730 65 Steam Deaerator21020-BAE-76600-PR-

DW-7206- Pressure Vessel ASME VIII Div 1/ PD 5500 LTCS 1 x 100% 2.4 135 4 195 - - - - - - - -

65-HE-5722 65 Dump Steam Condenser21020-BAE-76600-PR-

DW-7206- Heat Exchanger ASME VIII Div 1/ PD 5500 LTCS + 3mm CA (Shell) 1 x 100% - - 16 - - - - - - - - - -

65-VH-5733 65 Blowdown Vessel Pressure Vessel ASME VIII Div. 1 LTCS + 3mm CA 1 x 100% ATM 100 7 / FV -8 / 135 - -

65-H-5720A 65 Steam Boiler A Economiser Heat Exchanger PED Cat IV, Module G Refer to PMA 1 x 100% 18 135 (IN) 23 210 (W)

65-H-5720B 65 Steam Boiler B Economiser Heat Exchanger PED Cat IV, Module G Refer to PMA 1 x 100% 18 135 (IN) 23 210 (W)

65-H-5720C 65 Steam Boiler C Economiser Heat Exchanger PED Cat IV, Module G Refer to PMA 1 x 100% 18 135 (IN) 23 210 (W)

65-HE-5701 65 Sample Cooler SS316 1 x 100%

65-HE-5702A 65 Crude Oil Steam Heater Heat Exchanger 1 x 100%

65-HE-5702AB 65 Crude Oil Steam Heater Heat Exchanger 1 x 100%

65-KF-5760A 65 Seal Air Fan Boiler A Centrifugal fan 1 x 100%

65-KF-5760B 65 Seal Air Fan Boiler B Centrifugal fan 1 x 100%

65-KF-5760C 65 Seal Air Fan Boiler C Centrifugal fan 1 x 100%

65-LP-5720A 65 Boiler A Local Control Panel Local Control Panel 316 SS

65-LP-5720B 65 Boiler B Local Control Panel Local Control Panel 316 SS

65-LP-5720C 65 Boiler C Local Control Panel Local Control Panel 316 SS

Tank Inerting Package

65-AY-2510 Tank Inerting Package21020-BAE-55220-PR-

DW-7210- Skid Package - - 1 x 100% - - - - - - - - - - - - -

65-KB-2510A 65 - Inert Gas Blower A21020-BAE-55220-PR-

DW-7210- Centrifugal Blower -

SS316 (Impeller)

CS (Casing)- 0.08 45 0.25 77 2.1 m3/s 105.0 - - - - - -

65-KB-2510B 65 -Inert Gas Blower B21020-BAE-55220-PR-

DW-7210- Centrifugal Blower -

SS316 (Impeller)

CS (Casing)- 0.08 45 0.25 77 2.1 m3/s 105.0 - - - - - -

65-VG-2510 65 - Inert Gas Scrubber21020-BAE-55220-PR-

DW-7210- Pressure Vessel - - - 0.184 28 / 250 1 250 7500 m3/hr - - - - - - - -

65-KF-2564A 65 Seal Air Fan for I.G. Unit Air Fan

35­AY­5910 35 Nitrogen Generation Package21020-BAE-75900-PR-

DW-7181- Skid Package -

Piping & valves - SS316L

P.Vessel - SS316L1 x 100% 6.8 35 10 -8/50 204 Sm3/hr - - 3.5 2.5 2.654 4.0 4.3 -

30-AY-5920 30A Nitrogen Bottle Rack21020-BAE-75900-PR-

DW-7181 - Skid Package -

Bottle - CS

Piping & Valves - SS316L16 nos 250.0 Ambiant 300 -8/50 - - - 2.6 2.2 2.485 4.86 5.5 -

35­VA­5910 35 Nitrogen Receiver21020-BAE-75900-PR-

DW-7182Vertical Pressure Vessel ASME VIII Div 1 CS + 3mm CA 1 x 100% 6.5 - 7.5 35 14/FV -8/50 - - - - 0.97 1.94 2.0 2.6 3.5

25-AY-6110 25 Fuel Gas Compressor Skid Package 7.5 2.5 4.5 25 26 28

C2 25­KS-6110 25 Fuel Gas Compressor A21020-BAE-76100-PR-

DW-7135Horizontal Screw Compressor API 619

Casing: CS

Rotor: forged steel1 x 100 %

Suction: 2.5;

Discharge: 8.5

Suction: 30;

Discharge: 10214 -8/150 3.1 MMscfd 211 280 - - - - - -

Located on 25-AY-6110 skid

'Each train Fuel gas compressor package include: Screw Compressor, Oil

Separator, Oil Filter, Oil Pump, Oil Cooler, Fuel Gas Cooler and discharge

scrubber.

C2 25-HA-6110 25 Fuel Gas Cooler A21020-BAE-76100-PR-

DW-7135Horizontal Air Cooler (Forced Draught) API 661 Casing: CS 1 x 100 % Process: 8.5

Process (In/Out):

102/45;

Air Temperature

(In/ Out): 28/STA

Process: 14 / FV Process:-8/ 150 - - - - - - - - - Located on 25-AY-6110 skid

25-AY-6120 25 Fuel Gas Compressor Skid Package 7.5 2.5 4.5 25 26 28

C2 25­KS-6120 25 Fuel Gas Compressor B21020-BAE-76100-PR-

DW-7225Horizontal Screw Compressor API 619

Casing: CS

Rotor: forged steel1 x 100 %

Suction: 2.5;

Discharge: 8.5

Suction: 30;

Discharge: 10214 -8/150 3.1 MMscfd 211 280 - - - - - -

Located on 25-AY-6120 skid

'Each train Fuel gas compressor package include: Screw Compressor, Oil

Separator, Oil Filter, Oil Pump, Oil Cooler, Fuel Gas Cooler and discharge

scrubber.

C2 25-HA-6120 25 Fuel Gas Cooler B21020-BAE-76100-PR-

DW-7225Horizontal Air Cooler (Forced Draught) API 661 Casing: CS 1 x 100 % Process: 8.5

Process (In/Out):

102/45;

Air Temperature

(In/ Out): 28/STA

Process: 14 / FV Process:-8/ 150 - - - - - - - Located on 25-AY-6120 skid

25-HS-6111 25 Fuel Gas Super Heater21020-BAE-76100-PR-

DW-7139Horizontal Electric Heater ASME VIII Div 1 / TEMA R/

Shell: Full solid SS316L;

Element: Incoloy 800 1 x 100% 6/5.5

In: 20-34;

Out: 6514/FV -8/90 - 362 2.4 0.566 1.043 0.874 0.874 -

25-HS-6112 25 Fuel Gas Import Heater21020-BAE-73100-PR-

DW-7161Horizontal Electric Heater ASME VIII Div 1 / TEMA R/

Shell: Full solid SS316L;

Element: Incoloy 800 1 x 100% 100/150

In: 5;

Out:65FV/ 207 -60/ 90 - 826 3.244 1.296 1.0 5.372 5.372 -

25-AY-2910 25Fiscal Metering Package (Gas Import) -

Future

21020-BAE-73100-PR-

DW-7161- - - - - 100 / 150 65 207 - 60 / 90 - - - 7.70 3.00 3.00 20.00 30.00 -

25-VG-6110 25 Fuel Gas KO Drum21020-BAE-76100-PR-

DW-7137Vertical Pressure Vessel ASME VIII Div 1 SS316L 1 x 100 % 7.5 35-45 FV / 14 -8/70 - - - 2.40 5.30 15.0 20.0 50.0

25-FS-6113 A 25 Fuel Gas Filter Coalescer21020-BAE-76100-PR-

DW-7138Vertical Pressure Vessel ASME VIII Div 1/ PD 5500 SS316L 1 x 100 % 7 - 7.5 35-45 FV / 14 -8/70 - - - - 0.6 3.175 2.2 3.0 4.0

25-FS-6113 B 25 Fuel Gas Filter Coalescer21020-BAE-76100-PR-

DW-7138Vertical Pressure Vessel ASME VIII Div 1/ PD 5500 SS316L 1 x 100 % 7 - 7.5 35-45 FV / 14 -8/70 - - - - 0.6 3.175 2.2 3.0 4.0

35­AY­5320 35 Seawater Coarse Filteration Package21020-BAE-75300-PR-

DW-7140- Skid Package - Super Duplex SS - 9.5 5/16.6 FV / 15 -8/50 3500 m3/h - - 5.8 3.5 4.6 25.0 42.0 -

- Part of Seawater Treatment Package Supply

- Located on 35-AY-5320 skid

SEAWATER TREATMENT SYSTEM

NITROGEN SYSTEM

- Steam Boiler System will be in one module.

- Refer to module drawing 21020-HAM-76600-ME-DW-0001.

- Particle Material Appraisal (PMA) - 21020-HAM-76600-QA-GN-0004.

FUEL GAS SYSTEM

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

C2 40­AY­6321 40 Seawater Fine Filtration Package21020-BAE-76300-PR-

DW-7142- Skid Package - GRE - 5.8 / 2 18 15 -8/50 929 m3/h - - 11.0 7.4 6.4 104.0 144.0 -

- Part of Seawater Treatment Package Supply

35-TA-6320 40 Seawater Buffer Tank - - Tank - - 1 x 100% ATM STA ATM -8/50 6 m3 - - 2.0 1.5 2.0 7.5 10.0 10.0

C2 40-PC-6320A 40 Sulphate Reduction Feed Pump A21020-BAE-76300-PR-

DW-7144- Centrifugal Pump API 610 API 610 - D-2 1 x 50% 31 18 41 -8/ 50 360 m3/h 451 500 5.2 1.4 1.4 9 - -

- Part of Seawater Treatment Package Supply

C2 40-PC-6320B 40 Sulphate Reduction Feed Pump B21020-BAE-76300-PR-

DW-7144- Centrifugal Pump API 610 API 610 - D-2 1 x 50% 31 18 41 -8/ 50 360 m3/h 451 500 5.2 1.4 1.4 9 - -

- Part of Seawater Treatment Package Supply

C2 40-PC-6320C 40 Sulphate Reduction Feed Pump C21020-BAE-76300-PR-

DW-7144- Centrifugal Pump API 610 API 610 - D-2 1 x 50% 31 18 41 -8/ 50 360 m3/h 451 500 5.2 1.4 1.4 9 - -

- Part of Seawater Treatment Package Supply

40-AY-6322 40 - Skid Package - - - - - - - - - - 6.0 5.0 4.0 18 31.5 35.00- Part of Seawater Treatment Package Supply

- 40 - CIP Tank21020-BAE-76300-PR-

DW-7147- Tank - FRP 1 x 100% - - - - - - - - - - - - - - Located on 40-AY-6322 skid

40-PE-6301 40 - CIP Pump21020-BAE-76300-PR-

DW-7147- Pump - SS316L 1 x 100% - - - - - - - - - - - - - - Located on 40-AY-6322 skid

40-FF-6301 40 - CIP Filter21020-BAE-76300-PR-

DW-7147- Pressure Vessel - SS316L 1 x 100% - - - - - - - - - - - - - - Located on 40-AY-6322 skid

40-HE-6301 40 - Electric Emersion Heater21020-BAE-76300-PR-

DW-7147- - - TBC 1 x 100% - - - - - - - - - - - - - - Located on 40-AY-6322 skid

C2 40-AY-6323 40 Vacuum Skid21020-BAE-76300-PR-

DW-7148- Skid Package - - - - 5/18 - -8 / 50 - - - 4.14 2.84 2.71 6.50 6.70 7.20

- Part of Seawater Treatment Package Supply

40-PV-6323A 40 - Vacuum Pump A21020-BAE-76300-PR-

DW-7148- Pump - SDSS 1 X 100 % - - - - - - - - - - - - - - Located on 40-AY-6323 skid

40-PV-6323B 40 - Vacuum Pump B21020-BAE-76300-PR-

DW-7148- Pump - SDSS 1 X 100 % - - - - - - - - - - - - - - Located on 40-AY-6323 skid

40-AU-6323 40 - Vacuum Ejector21020-BAE-76300-PR-

DW-7148- - - - 2 x 100% - - - - - - - - - - - - - - Located on 40-AY-6323 skid

40-V-6323 40 - Seal Water Separator21020-BAE-76300-PR-

DW-7148- Pressure Vessel - - - - - - - - - - - - - - - - - Located on 40-AY-6323 skid

C2 40-CD-6323 40 - Deaerator Tower21020-BAE-76300-PR-

DW-7148- Pressure Vessel ASME VIII Div 1 CS + GFL 1 x 100% - 5/18 FV / 3.5 -8 / 50 530 m3/h - - - 2.8 20.2 55 84 162

C2 40­AY­6320 40 Sulphate Reduction Package21020-BAE-76300-PR-

DW-7145- Skid Package - STC 1 x 100% 31 5/18 41 -8/50 802 m3/h - - 9.7 10.5 11.8 71 80 -

- Part of Seawater Treatment Package Supply

C2 35-AY-6324 35 Skid Package - - 1 x 100% ATM AMB ATM AMB - - - 2.8 4.0 3.5 7.0 21.0 21.0- Part of Seawater Treatment Package Supply

40-HE-6325 40 Seawater Heater21020-BAE-76300-PR-

DW-7142Vertical Shell and Tube

ASME SEC.VIII, DIV. 1/

TEMA R/ API 660

LTCS + 3mm CA (ShellSide)

25% Cr SDSS (TubeSide)1 x 100%

Shell: 1.5;

Tube: 6.8

Shell (In/ Out): 128;

Tube (In/Out): 5/18

Shell: FV/12;

Tube: FV/15-8/ 165 12.5 MW - - - 0.71 3.5 4.2 5.0 6.0

- TEMA Type BEM

C2 40-PC-6321A 40 Treated Seawater Transfer Pump A21020-BAE-76300-PR-

DW-7149Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 X 100 %

Suction: 0.325;

Discharge: 12.818 18.5 -8/50 583 m3/h 311 400 4.0 2.0 1.7 7.2 7.9 8.6

C2 40-PC-6321B 40 Treated Seawater Transfer Pump B21020-BAE-76300-PR-

DW-7149Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 X 100 %

Suction: 0.325;

Discharge: 12.818 18.5 -8/50 583 m3/h 311 400 4.0 2.0 1.7 7.2 7.9 8.6

C2 35-AY-6325 35 Chemical transfer skid21020-AKR-76300-PR-

DW-0039 - Skid Package - - 2 x 100% 3 Amb 4 -8/50 1200 L/hr - - 1.4 1.4 1.2 0.90 2

SEAWATER INJECTION & HSP POWER WATER SYSTEM

40-HE-6310 40 WI Heater21020-BAE-76300-PR-

DW-7127Vertical Shell and Tube

ASME SEC.VIII, DIV. 1/

TEMA R/ API 660

LTCS + 3mm CA (ShellSide)

25% Cr SDSS (TubeSide)1 x 100%

Shell: 1.5;

Tube: 7

Shell (In/ Out):

128/128;

Tube (In/Out):

35/50

Shell: 9/FV;

Tube: 28/ FV-8/ 165 7 MW - - - 0.7 1.85 3.3 5.0 6.0

- TEMA Type BEM

40-HE-6311 40 HSP Power Water Heater21020-BAE-76300-PR-

DW-7126Vertical Shell and Tube

ASME SEC.VIII, DIV. 1/

TEMA R/ API 660

LTCS + 3mm CA (ShellSide)

25% Cr SDSS (TubeSide)1 x 100%

Shell: 1.5;

Tube: 7

Shell (In/ Out):

128/128;

Tube (In/Out):

49/55

Shell: 9/FV;

Tube: 28/ FV-8/ 165 11 MW - - - 0.70 3.3 4.4 5.5 6.0 - TEMA Type BEM

40-PC-6310A 40 Water Injection Pump A21020-BAE-76300-PR-

DW-7128Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 50 %

Suction: 6.1;

Discharge: 159.445/50 207 -8 / 80 915 m3/h 4318 4750 7.8 3.35 4.40 37.0 39.2 39.2

40-PC-6310B 40 Water Injection Pump B21020-BAE-76300-PR-

DW-7128Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 50 %

Suction: 6.1;

Discharge: 159.445/50 207 -8 / 80 915 m3/h 4318 4750 7.8 3.35 4.40 37.0 39.2 39.2

40-PC-6310C 40 Water Injection Pump C21020-BAE-76300-PR-

DW-7128Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 50 %

Suction: 6.1;

Discharge: 159.445/50 207 -8 / 80 915 m3/h 4318 4750 7.8 3.35 4.40 37.0 39.2 39.2

40-PC-6311A 40 HSP Power Water Pump A21020-BAE-76300-PR-

DW-7129Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 33 %

Suction: 6.2;

Discharge: 33655/60 390 -8 / 80 500 m3/h 6031 6800 10 3.65 4.7 56.1 58.7 58.7

40-PC-6311B 40 HSP Power Water Pump B21020-BAE-76300-PR-

DW-7129Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 33 %

Suction: 6.2;

Discharge: 33655/60 390 -8 / 80 500 m3/h 6031 6800 10 3.65 4.7 56.1 58.7 58.7

40-PC-6311C 40 HSP Power Water Pump C21020-BAE-76300-PR-

DW-7129Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 33 %

Suction: 6.2;

Discharge: 33655/60 390 -8 / 80 500 m3/h 6031 6800 10 3.65 4.7 56.1 58.7 58.7

40-PC-6311D 40 HSP Power Water Pump D21020-BAE-76300-PR-

DW-7129Horizontal Centrifugal Pump API 610

Super Duplex SS - API 610 D-

21 x 33 %

Suction: 6.2;

Discharge: 33655/60 390 -8 / 80 500 m3/h 6031 6800 10 3.65 4.7 56.1 58.7 58.7

40-TA-6351 40 Pumps Seal Auto Top Up Unit - - - - - 1 x 100% - - - - - - - 3.00 2.00 1.90 1.2 2.4 2.4

- Common pumps seal auto top up unit for all HSP Power Water and Water

Injection pumps

Seawater Treatment Chemical Injection Package

Clean In Place Package (CIP)

Final dimensions and weights of skids may change upon final motor selection

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

90-VA-6410 90 Closed Drain Drum21020-BAE-71800-PR-

DW-7189- Pressure Vessel ASME VIII Div 1 SDSS 1 X 100 % 0.2 45-140 FV/ 10 -8/ 165 - - - 6.5 2.6 - 12.0 52 58

90-HS-6410A 90 Closed Drain Drum Heater A21020-BAE-71800-PR-

DW-7189- - - Incolloy 800 - - - - - 40 kW - - - - - - - -

90-HS-6410B 90 Closed Drain Drum Heater B21020-BAE-71800-PR-

DW-7189- - - Incolloy 800 - - - - - 40 kW - - - - - - - -

90-PP-6410A 90 Closed Drain Pump A21020-BAE-71800-PR-

DW-7190Horizontal Progressive Cavity Pump API 676 Super Duplex SS 1 X 100 % 0.1-11.5 45 14 -8 /165 10 m3/h 4.93 kW 12.5 3.1 0.9 2.6 0.85 0.87 0.94

90-PP-6410B 90 Closed Drain Pump B21020-BAE-71800-PR-

DW-7190Horizontal Progressive Cavity Pump API 676 Super Duplex SS 1 X 100 % 0.1-11.5 45 14 -8 /165 10 m3/h 4.93 kW 12.5 3.1 0.9 2.6 0.85 0.87 0.94

15-AX-6821 Methanol Injection Skid - Horizontal Skid Package - - - - - - - - - - 5.5 4.0 3.0 17.2 23.3 26.3 - Located at main deck

15­PE­6820A 15 Methanol Injection Pump A21020-BAE-76800-PR-

DW-7192-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge: 352 AMB 379 -8/50 1 m3/h - 22

15­PE­6820B 15 Methanol Injection Pump B21020-BAE-76800-PR-

DW-7192-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge: 352 AMB 379 -8/50 1 m3/h - 22

15­TA­6820 15 Methanol Tank21020-BAE-76800-PR-

DW-7165Horizontal Pressure Vessel - SS316L 1 X 100 % 0.5 to 2 AMB 10/ FV -8/50 5 m3 - -

35-PE-6821 35 Methanol Transfer Pump 21020-BAE-76800-PR-

DW-7165-

Rotary Positive

Displacement Pump- SS316L 1 x 100% Discharge: 6.4 AMB 10 -8/50 5 m3/h - - 1.2 1,2 1.2 0.50 0.5 1

35­AX­6820 35 Chemical Injection Package - - Skid Package - - - - - - - - - - 9.0 7.5 7.5 102.7 310.1 358.9

35­PE­6810A 35 LP Scale Inhibitor Injection Pump A21020-BAE-76800-PR-

DW-7163-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 15

H2: 15

H3: 19.5

H4: 16

AMB 28 -8/50

H1: 3 LPH

H2: 3 LPH

H3: 20 LPH

H4: 16 LPH

- 0.21 - - - - - -

35­PE­6810B 35 LP Scale Inhibitor Injection Pump B21020-BAE-76800-PR-

DW-7163-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 15

H2: 15

H3: 19.5

H4: 16

AMB 28 -8/50

H1: 3 LPH

H2: 3 LPH

H3: 20 LPH

H4: 16 LPH

- 0.21 - - - - - -

35­PE­6811A 35 HP Scale Inhibitor Injection Pump A21020-BAE-76800-PR-

DW-7176-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge: 106 AMB 116 -8/50 33 LPH - 0.86 - - - - - -

35­PE­6811B 35 HP Scale Inhibitor Injection Pump B21020-BAE-76800-PR-

DW-7176-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge: 106 AMB 116 -8/50 33 LPH - 0.86 - - - - - -

35­PE­6816A 35 LP Demulsifier Injection Pump A21020-BAE-76800-PR-

DW-7164-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 19

H2: 19

H3: 19

AMB 25 -8/50

H1: 22 LPH

H2: 22 LPH

H3: 6.3 LPH

- 0.44 - - - - - -

35­PE­6816B 35 LP Demulsifier Injection Pump B21020-BAE-76800-PR-

DW-7164-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 19

H2: 19

H3: 19

AMB 25 -8/50

H1: 22 LPH

H2: 22 LPH

H3: 6.3 LPH

- 0.44 - - - - - -

35­PE­6816C 35 LP Demulsifier Injection Pump C21020-BAE-76800-PR-

DW-7164-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 19

H2: 19

H3: 19

AMB 25 -8/50

H1: 22 LPH

H2: 22 LPH

H3: 6.3 LPH

- 0.44 - - - - - -

35­PE­6815A 35 HP Demulsifier Injection Pump A21020-BAE-76800-PR-

DW-7191-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge: 53 AMB 64 -8/50 21 l/h - 0.44 - - - - - -

35­PE­6815B 35 HP Demulsifier Injection Pump B21020-BAE-76800-PR-

DW-7191-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge: 53 AMB 64 -8/50 21 l/h - 0.44 - - - - - -

35­PE­6825A 35 Anti-Foam Injection Pump A21020-BAE-76800-PR-

DW-7166-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 14.5

H2: 19

H3: 19

AMB 25 -8/50

H1: 15 LPH

H2: 15 LPH

H3: 6 LPH - 0.21 - - - - - -

35­PE­6825B 35 Anti-Foam Injection Pump B21020-BAE-76800-PR-

DW-7166-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 14.5

H2: 19

H3: 19

AMB 25 -8/50

H1: 15 LPH

H2: 15 LPH

H3: 6 LPH - 0.21 - - - - - -

35­PE­6825C 35 Anti-Foam Injection Pump C21020-BAE-76800-PR-

DW-7166-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 14.5

H2: 19

H3: 19

AMB 25 -8/50

H1: 15 LPH

H2: 15 LPH

H3: 6 LPH - 0.21 - - - - - -

35­PE­6830A 35Reverse Emulsion Breaker Injection

Pump A

21020-BAE-76800-PR-

DW-7168-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 16.7

H2: 19AMB 25 -8/50

H1: 42 LPH

H2: 42 LPH - 0.86 - - - - - -

35­PE­6830B 35Reverse Emulsion Breaker Injection

Pump B

21020-BAE-76800-PR-

DW-7168-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 16.7

H2: 19AMB 25 -8/50

H1: 42 LPH

H2: 42 LPH - 0.86 - - - - - -

35­PE­6830C 35Reverse Emulsion Breaker Injection

Pump C

21020-BAE-76800-PR-

DW-7168-

Rotary Positive

Displacement Pump- SS316L 1 X 50 %

Discharge

H1: 16.7

H2: 19AMB 25 -8/50

H1: 42 LPH

H2: 42 LPH - 0.86 - - - - - -

35­PE­6840A 35 Flocculent Injection Pump A21020-BAE-76800-PR-

DW-7171-

Rotary Positive

Displacement Pump- SS316L 1 X 100 %

Discharge:

H1: 16.7 AMB 21 -8/50H1: 42 LPH

- 0.21 - - - - - -

35­PE­6840B 35 Flocculent Injection Pump B21020-BAE-76800-PR-

DW-7171-

Rotary Positive

Displacement Pump- SS316L 1 X 100 %

Discharge:

H1: 16.7 AMB 21 -8/50H1: 42 LPH

- 0.21 - - - - - -

35­PE­6840C 35 Flocculent Injection Pump C21020-BAE-76800-PR-

DW-7171-

Rotary Positive

Displacement Pump- SS316L 1 X 100 %

Discharge:

H1: 16.7 AMB 21 -8/50H1: 42 LPH

- 0.21 - - - - - -

CHEMICAL INJECTION SYSTEM

CLOSED DRAIN SYSTEM

Located on 15-AX-6821 skid

- Located at main deck

Located on AX-6820 skid

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

35­PE­6865A 35 Oxygen Scavenger Injection Pump A21020-BAE-76800-PR-

DW-7169-

Rotary Positive

Displacement Pump- SS316L 1 X 100 %

Discharge

H1: 21.5

H2: 16

AMB 28 -8/50H1: 9 LPH

H2: 25 LPH - 0.44 - - - - - -

35­PE­6865B 35 Oxygen Scavenger Injection Pump B21020-BAE-76800-PR-

DW-7169-

Rotary Positive

Displacement Pump- SS316L 1 X 100 %

Discharge

H1: 21.5

H2: 16

AMB 28 -8/50H1: 9 LPH

H2: 25 LPH - 0.44 - - - - - -

35­PE­6870A 35 Biocide Injection Pump A21020-BAE-76800-PR-

DW-7170-

Rotary Positive

Displacement Pump- SS316L 1 X 100 %

Discharge

H1: 19

H2: 11.5

H3: 7.5

AMB 28 -8/50

H1: 1002 LPH

H2: 265 LPH

H3: 52 LPH

- 6.6 - - - - - -

35­PE­6870B 35 Biocide Injection Pump B21020-BAE-76800-PR-

DW-7170-

Rotary Positive

Displacement Pump- SS316L 1 X 100 %

Discharge

H1: 19

H2: 11.5

H3: 7.5

AMB 28 -8/50

H1: 1002 LPH

H2: 265 LPH

H3: 52 LPH

- 6.6 - - - - - -

35-PE-6880A 35Oxygen Scavenger Catalyst Injection

Pump

21020-BAE-76800-PR-

DW-7172-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge:12.5 AMB 15 -8/50 3.3 LPH - 0.21 - - - - - -

35-PE-6880B 35Oxygen Scavenger Catalyst Injection

Pump

21020-BAE-76800-PR-

DW-7172-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge:12.6 AMB 15 -8/50 3.3 LPH - 0.21 - - - - - -

35-PE-6881A 35 Seawater Antifoam Pump A21020-BAE-76800-PR-

DW-7193-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge:19 AMB 25 -8/50 22 LPH - 0.21 - - - - - -

35-PE-6881B 35 Seawater Antifoam Pump A21020-BAE-76800-PR-

DW-7193-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge:19 AMB 25 -8/50 22 LPH - 0.21 - - - - - -

35-PE-6882A 3521020-BAE-76800-PR-

DW-7193-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge:19 AMB 25 -8/50 22 LPH - 0.21 - - - - - -

35-PE-6882B 3521020-BAE-76800-PR-

DW-7193-

Rotary Positive

Displacement Pump- SS316L 1 X 100 % Discharge:19 AMB 25 -8/50 22 LPH - 0.21 - - - - - -

35­TA­6810 35 Scale Inhibitor Tank21020-BAE-76800-PR-

DW-7162- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 30 m3 - - - - - - - -

35­TA­6815 35 HP Demulsifier Inhibitor Tank (Subsea)21020-BAE-76800-PR-

DW-7162- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 10 m3 - - - - - - - -

35­TA­6816 35 LP Demulsifier Inhibitor Tank (Topside)21020-BAE-76800-PR-

DW-7162- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 20 m3 - - - - - - - -

35­TA­6825 35 Anti-Foam Tank21020-BAE-76800-PR-

DW-7162- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 10 m3 - - - - - - - -

35­TA­6830 35 Reverse Emulsion Breaker Tank21020-BAE-76800-PR-

DW-7174- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 30 m3 - - - - - - - -

35­TA­6840 35 Flocculent Tank21020-BAE-76800-PR-

DW-7174- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 25 m3 - - - - - - - -

35­TA­6865 35 Oxygen Scavenger Tank21020-BAE-76800-PR-

DW-7174- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 15 m3 - - - - - - - -

35­TA­6870 35 Biocide Tank21020-BAE-76800-PR-

DW-7174- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 30 m3 - - - - - - - -

35-TA-6880 35 Oxygen Scavenger Catalyst Tank21020-BAE-76800-PR-

DW-7175- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 5 m3 - - -

35­TA­6881 35 Seawater Antifoam - Tank - SS316L 1 X 100 % ATM AMBFull Static+

0.07 Barg-8/50 10 m3 - - - - - - - -

35­TA­6882 35

Spare Chemical Tank for:

1. H2S Scavenger

2. Asphaltene Dispersant

3. Naphtalene Inhibitor

4. Filter Aids

5. Calcium Nitrate

- Tank - SS316L 1 X 100 % ATM AMBFull Static+

0.07 Barg-8/50 10 m3 - - - - - - - -

C2 75-TA-9710 75 Lab Drain Tank21020-BAE-79700-PR-

DW-7167- Tank - SS316L 1 X 100 % ATM AMB

Full Static+

0.07 Barg-8/50 1 m3 - - 1 1 1 0.67 2 2

35 Chemical Injection Tote tanks 15 4.2 m3 1.995 1.995 2.574 12.0Weight for one unit of tote tanks

C2 70A Main Power Generator Package Module 30.2 16.4 35.14 1608 1864.98

70-AY-7110A 70A Power Generation Package A - - Skid Package - - 1 x 33% - - - - - - 15 MW - - - - - -

70-AY-7110B 70A Power Generation Package B - - Skid Package - - 1 x 33% - - - - - - 15 MW - - - - - -

70-HX-7110A 70A Waste Heat Recovery Unit A - - Skid Package - - 1 x 33% - - - - 5 MW - - - - - - - -

70-HX-7110B 70A Waste Heat Recovery Unit B - - Skid Package - - 1 x 33% - - - - 5 MW - - - - - - - -

70B Main Power Generator Package Module - 31.2 16.4 35.14 1625 1912.01

70-AY-7110C 70B Power Generation Package C - - Skid Package - - 1 x 33% - - - - - - 15 MW - - - - -

70-AY-7110D 70B Power Generation Package D - - Skid Package - - 1 x 33% - - - - - - 15 MW - - - - -

70-HX-7110C 70B Waste Heat Recovery Unit C - - Skid Package - - 1 x 33% - - - - 5 MW - - - - - - - -

70-HX-7110D 70B Waste Heat Recovery Unit D - - Skid Package - - 1 x 33% - - - - 5 MW - - - - - - - -

Crude Oil Treatment System

25-VZ-6258 25 Crude Oil Treatment Unit - - Skid Package - - 1 x 100% - - - - - - - 6.965 3.1 2..76 9.7 10.8 - - Part of Power Generation Package Supply

Feeder Unit Skid Package

25-PR-6209A 25 Feeder Unit - - Booster Pump - - 1 - - - - - - -

25-PR-6209B 25 Feeder Unit - - Booster Pump - - 1 - - - - - - -

25-TA-6211 25 Crude Oil Buffer Tank - - Tank - - 1 - - - - 40m3 - - 5.12 3.62 2.40 9.18 58 68 - Part of Power Generation Package Supply

C2 DA-EDG-7123-01 - Essential Power Generation - Electrical Power Generator - - 1 - - - - - - 2000kWe 7.6 2.8 3.446 28.28 28.86 Located in Marine Area

ESSENTIAL POWER GENERATION

POWER GENERATION

Spare Pumps for:

1. H2S Scavenger Injection

2. Asphaltene Dispersant Injection

3. Napthenate Inhibitor Injection

4. Calcium Nitrate

5. Filter Aids Injection

CHEMICAL/ STORAGE TANKS

- Part of Power Generation Package Supply

- Located on a combined Feeder Unit skid

- Combined weight

Located on Main Power Generator Package in Module M70A

Located on Main Power Generator Package in Module M70B

21020-BAE-76800-PR-

DW-7175

2.6 1.4 2.0 0.8 1 1

-

Located on AX-6820 skid

Project : KRAKEN FPSO

Project No: 21020

Doc. No. 21020-BAE-70000-ME-LS-0001

Revision : C2

Date : 5-Jun-15

ELECTRICAL

EQUIPMENT

TYPEP & ID

ORIENTATION

(HORIZONTAL

/VERTICAL)

EQUIPMENT

DESIGN

CODE/CLASS

MATERIAL OF

CONSTRUCTION

OPERATING

(MT)REMARKS

MECHANICAL DESIGN CONDITIONS OPERATING DESIGN CONDITIONS SIZE

REV

No.

EQUIPMENT /

TAG No.DESCRIPTION

CONFIGURATION

/QUANTITY

DESIGN PRESS

(barg)MODULE

DESIGN TEMP

(oC)

ABSORBED

POWER

PER UNIT

(kW)

DESIGN CAPACITY

RATED

POWER

PER UNIT

(kW)

L or T/T

(m)

W or I.D

(m)

OPERATING

TEMP

(oC)

OPERATING

PRESS

(barg)

DRY (MT)H or T/T

(m)

TEST

(MT)

WEIGHT - TONNES

TOPSIDES MASTER EQUIPMENT LIST

25-TA-xxxx 25 Well Cleaning Skid (Future) - - Skid Package - - - - - - - - - - 3.1 1.9 2.3 5.0 - -

- E-house - - Module - - - - - - - - - - 30.2 23.80 24.9 1515.73 1515.73

- For E-house weight detail, please refer to 21020-ABB-70060-ST-RP-1205

- For E-house equipment detail, please refer to 21020-ABB-70060-EL-DW-1201

(Module M60 Electrical Equipment Layout).

25-AX-8121 25 Deluge Valve Skid21020-BAE-78100-HS-

DW-0001Horizontal Skid Package CS / SDSS / SS316L 1 x 100% 10/12 5/16.6 20.00 -8/50 - - - 3.54 2.34 3.00 9.87 10.26 -

30-AX-8101 30 Deluge Valve Skid21020-BAE-78100-HS-

DW-0005Horizontal Skid package CS / SDSS / SS316L 1x 100% 10/12 5/16.6 20.00 -8/50 - - - 3.54 2.34 3.00 9.87 10.26 -

30-AX-8331 30A/B Deluge Valve Skid21020-BAE-78100-HS-

DW-0011Horizontal Skid package CS / SDSS / SS316L 1 x 100% 10/12 5/16.6 20.00 -8/50 - - - 7.00 4.20 3.80 25.41 31.21 -

75-AX-8371 75 Deluge Valve Skid21020-BAE-78100-HS-

DW-0012Horizontal Skid package CS / SDSS / SS316L 1 x 100% 10/12 5/16.6 20.00 -8/50 - - - 4.24 2.14 3.00 10.16 11.75 -

35-AX-8331 35 Deluge Valve Skid21020-BAE-78100-HS-

DW-0013Horizontal Skid package CS / SDSS / SS316L 1 x 100% 10/12 5/16.6 20.00 -8/50 - - - 3.15 1.55 1.55 6.40 7.51 -

10-AX-8311 10 Deluge Valve Skid21020-BAE-78100-HS-

DW-0015Horizontal Skid package CS / SDSS / SS316L 1 x 100% 10/12 5/16.6 20.00 -8/50 - - - 5.20 2.60 3.60 14.55 19.33 -

C2 - 75 Laboratory - Horizontal Container CS 1 x 100% - - - - - 7.8 3.0 3.0 13 (Hold) 13 (Hold)

C2 - 75 Mechanical Workshop - Horizontal Container CS 1 x 100% - - - - - 6.0 3.0 2.7 13 (Hold) 13 (Hold)

C2 - 75 E&I Workshop - Horizontal Container CS 1 x 100% - - - - - 6.0 3.0 2.7 13 (Hold) 13 (Hold)

C2 - 75 Store - Horizontal Container CS 1 x 100% - - - - - 6.0 3.0 2.7 13 (Hold) 13 (Hold)

35-AF-9910 35 Helifuel Transfer Pump Unit - Horizontal Skid NA 1 - - - - - - 6.00 2.00 2.68 3.50 12.50 Marine Package located ar M35

C2 MD-AY-2150 MD Slop Water Treament Package - Horizontal Skid - - - - - - - - - - 4.00 3.90 3.20 8.00 13.00 Located at Main Deck

68-AX-6830 90 Hydraulic Fluid Unloading System - - - - - - - - - - - - - - - - 5 (HOLD) 5 (HOLD) Enquest VO items

General Notes:

1) Information specified in this equipment list is either based on P&ID Rev C3, latest process data sheet and latest SUPPLIER data as of 5 June 2015. 4) This list includes equipment for topside only. For marine equipment, marine equipment listto be referred.

This data is subject to confirmation until final data is obtained from selected equipment/package SUPPLIERs for approved engineering deliverables. 5) Refer respective supplier equipment General Arrangement drawings for Centre of Gravity data

2) Indicated Equipment location are based on FPSO layout rev.C1

3) Abbreviation List:

STA - Supplier to advise CS - Carbon Steel

STC - Supplier to confirm LTCS - Low Temperature Carbon Steel

CA - Corrosion Allowance DSS - Duplex Stainless Steel

GRE - Glass Reinforced Epoxy SDSS - Super Duplex Stainless Steel

HDPE - High Density Polyethylene

E-HOUSE PACKAGE

Deluge Package

Laboratory, Workshop & Stores Package

Helicopter Refueling Unit

Others