Marshal Stability Test
-
Upload
aenan-bashir -
Category
Documents
-
view
216 -
download
0
Transcript of Marshal Stability Test
-
7/25/2019 Marshal Stability Test
1/1
MARSHAL STABILITY APPARATUSGROUP MEMBERS : ZEESHAN ZAFAR L12- 5730, MAISAM HUSSAIN L12- 5716,
AENAN BASHIR L12- 5715, TAIMUR SALIK L12- 5727, USMAN L12- 5731
DEPARTMENT OF I!IL ENGINEERING, FAST "NUES#
Bituminous mixes (some times called asphalt mixes) are
used in the surface layer of road and airfield pavements.
The mix is composed usually of aggregate and asphalt
cements. Some types of bituminous mixes are also used in
base coarse. The design of asphalt paving mix, as with the
design of other engineering materials is largely a matter of
selecting and proportioning constituent materials to obtain
the desired properties in the finished pavement structure.
The desirable properties of Asphalt mixes are
!."esistance to permanent deformation.
#.The mix should not crac$ when sub%ected to repeated
loads over a period of time.
&."esistance to low temperature crac$ing.
'.urability
."esistance to moisture*induced damage.
+.S$id resistance.. -or$ability
. /ow noise and good drainage properties
0arshall stability and 1veem stabilometer tests are
largely used for the routine testing. 2riteria for the
suitable mix design have been specified by the Asphalt
3nstitute
INTRODUCTION
The apparatus consists of !. A loading unit motori4ed, capacity 555$gf
with two telescopic pillars and an ad%ustable
cross head. /imit switches are fitted inside to
control upward or downward movement of the
pillars. 6n*off reversing switch and indicator
lamps are on the front side while a hand wheel
to manually move the pillars is on the right.
The load frame has fixed speed of .5cm per
minute. 6perated on #&5 7olts A.2.
#. ! 8o. 2ompaction pedal with specimen mold
holder.
&. # 8os. 2ompaction "ammers, '.$g weight
and free fall '.cm.
'. ! 8o. Brea$ing head assembly with provision
to fix flowmeter.. & 8os. Specimen mold !5.!+cm 3.. x .+cm
high with base plate and extension collar.
+. ! 8o. 9it for specimen extraction, consists of
one each load transfer bar, steel ball, specimen
extracting plate.
Accessories
a) 3ntegral type :roving "ing capacity &555 $gs.
b) A dial gauge 5.5! x #mm
c) ;niversal -ater Bath S.S. with false bottom
and pyramid shaped lid to accommodates &
8os. 0arshall specimen
d) Thermometer 5 * #5